I have a GT-P1010 No GSM, or CDMA.
I have see the honeycomb rom for gsm and cdma. But not the wifi only.
I want to know if there is a wifi only GT-P1010 homeycomb rom. If not would the gsm or cdma rom work. If so what rom should I use.
Thank you for the help.
devriesj70048 said:
I have a GT-P1010 No GSM, or CDMA.
I have see the honeycomb rom for gsm and cdma. But not the wifi only.
I want to know if there is a wifi only GT-P1010 homeycomb rom. If not would the gsm or cdma rom work. If so what rom should I use.
Thank you for the help.
Click to expand...
Click to collapse
There´s no custom rums for P1010 at the moment, you can´t use GSM or CDMA, beacuse the hardware is very diferent.
A clockworkmod project in is progress for P1010 check it in developers section.
Thats to bad.
Hi guys, I followed a link to the wrong firmware for a P1000 tablet and bricked my GT-P1010 (wifi only). Right now I am sitting on a device that does not even come up to the recovery icon (Yellow triangle). Any ideas how to proceed from there besides sending back to samsung? I purchased the unit in May so it is still under warranty but I have to jump through a lot of hoops to send it back. Any suggestions would be appreciated. The device does not get recognized by a computer at all so I am stuck.
mantoles said:
Hi guys, I followed a link to the wrong firmware for a P1000 tablet and bricked my GT-P1010 (wifi only). Right now I am sitting on a device that does not even come up to the recovery icon (Yellow triangle). Any ideas how to proceed from there besides sending back to samsung? I purchased the unit in May so it is still under warranty but I have to jump through a lot of hoops to send it back. Any suggestions would be appreciated. The device does not get recognized by a computer at all so I am stuck.
Click to expand...
Click to collapse
If you can't even get into download mode, you'll have to get the device jtagged.
Sent from my GT-P1000 using Tapatalk
rafaeker19 said:
There´s no custom rums for P1010 at the moment, you can´t use GSM or CDMA, beacuse the hardware is very diferent.
A clockworkmod project in is progress for P1010 check it in developers section.
Click to expand...
Click to collapse
Check out the general section, a dev called motafoka is claiming to have great plans for the 1010, maybe you guys can finally get some "sugar"
Derrian said:
If you can't even get into download mode, you'll have to get the device jtagged.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
can u switch it on??
if not hold the power button and tap the touch screen
everything will be reset again
try for sometime it will work
Related
plz need help here
phone working after flashing arabic rom but with blank screen
can anyone provide asolution
ehab_elshaer said:
can anyone provide asolution
Click to expand...
Click to collapse
No need to bump after just an hour - especially for a Sprint Tab where most of the advice is going to have to wait until the Americans wake up!
Simplest answer is to flash back to your original ROM for the time being! Chances are the Arabic ROM you are flashing to has incorrect screen drivers for the Sprint Tab. If this is the case, simply flashing back the original kernel may help.
Regards,
Dave
sorry
but could you provide alink for original rom
i can`t find it
thankx
ehab_elshaer said:
sorry
but could you provide alink for original rom
i can`t find it
thankx
Click to expand...
Click to collapse
The stock firmware can be found in this thread: http://forum.xda-developers.com/showthread.php?t=869819
As per your blank screen, you flashed GSM firmware to your CDMA tab...not sure a workaround as I'm nervous to try anything gsm on mine
Sent from my SCH-I800 using XDA Premium App
I just got over a soft bricked tab by using Odin 3 with the sprint stock files. But if yours is a Verizon tab I don't know what firmware you need to use but I am sure a quick search on google will turn something up.
Let me just save you some time...You are 100% without a doubt bricked. Send it in to Samsung.
I have just purchased Verizon Galaxy TAB CDMA.
I am planning to use it in Wifi only mode and am not planning to subscribe to Verizon service.
Questions: Can I install GSM or Sprint CDMA ROMS or I should look for Verizon CDMA ROMS only? Can anyone recommend one?
Can someone reply please? I don't see this asnwered.
As far as I know it is possible. You just need to compile a special kernel, which I have no knowledge on how to do. Search the forumz. I know that there is information on how to instal a gsm rom on a verizon tab. Maybe that guy can help you.
Hit the thanks button if I have helped.
Sent from my SGH-T849 using XDA Premium App
First things first, have a little patience when asking questions, this forum isn't nearly as active as some of the others, and questions don't get immediately answered.
Second, you *WILL* brick your device if you install a GSM kernel on your CDMA device. The kernel is what supports the ROM and talks directly to your hardware. Obviously, the hardware on a CDMA device varies from a GSM device. If a kernel can be compiled to interact properly with an already built GSM ROM, than yes, in theory it does work (as can be seen with the Honeycomb port. The ROM port is built for CDMA, and a kernel was built to interact with that and the GSM device properly)
As far as I know it is possible. You just need to compile a special kernel, which I have no knowledge on how to do. Search the forumz. I know that there is information on how to instal a gsm rom on a verizon tab. Maybe that guy can help you.
Hit the thanks button if I have helped.
Sent from my SGH-T849 using XDA Premium App
Click to expand...
Click to collapse
btyork said:
First things first, have a little patience when asking questions, this forum isn't nearly as active as some of the others, and questions don't get immediately answered.
Second, you *WILL* brick your device if you install a GSM kernel on your CDMA device. The kernel is what supports the ROM and talks directly to your hardware. Obviously, the hardware on a CDMA device varies from a GSM device. If a kernel can be compiled to interact properly with an already built GSM ROM, than yes, in theory it does work (as can be seen with the Honeycomb port. The ROM port is built for CDMA, and a kernel was built to interact with that and the GSM device properly)
Click to expand...
Click to collapse
Thank you so much for your replies. I did do search and did not find a conculsive answer so I had to ask. I agree with your point about being patient
hi
is it possible to write to sch-i800 european language pack?
Just wondering if I can put Gingerbread on it. I tried Honeycomb, and while it sorta worked, it's really just not ready yet for using as a daily OS.
Thanks,
-av
same question for noob like me...
avwuff said:
Just wondering if I can put Gingerbread on it. I tried Honeycomb, and while it sorta worked, it's really just not ready yet for using as a daily OS.
Thanks,
-av
Click to expand...
Click to collapse
No not yet... and dont try it cause it will brick your tab, but always remember if you brick it as long as you can get into download mode you can always unbrick your tab (Sprint) using EA-24.
BTW: Wrong catagory for questions. Use Q&A
Sorry I've been reading this forum all day
Yeah I already bricked it a few times and then brought it back with EA24, which is what I am running now. Is there anything better? I really want those CRT on/off animations and stuff.
I too would love to see a GB rom for us. Probably won't happen though.
Sent from my SPH-P100 using XDA App
avwuff said:
Sorry I've been reading this forum all day
Yeah I already bricked it a few times and then brought it back with EA24, which is what I am running now. Is there anything better? I really want those CRT on/off animations and stuff.
Click to expand...
Click to collapse
Well if you could flash a rom to it -it wasn't "bricked". The term "brick" is used far to loosely now. Its bricked when you cant restore with software and you have to either replace or repair board with jtag etc. What you did was simply screw a flash up so device wouldn't boot a rom.
gsu_golfer said:
I too would love to see a GB rom for us. Probably won't happen though.
Click to expand...
Click to collapse
You will but you will likely have to wait for your carrier or Samsung to update you via kies or you flash manually once its released.
PS. You shouldnt be creating topic sin this section, this is for devs/chefs only for posting roms/kernels/ref etc. Stick to Q&A and read sticky topics.
Hey, question: It's a sprint Tab, but I don't use Sprint and I don't care if the cell modem doesn't work at all. Is the rest of the hardware so different that I can't use one of the GSM ones, for example?
-av
avwuff said:
Hey, question: It's a sprint Tab, but I don't use Sprint and I don't care if the cell modem doesn't work at all. Is the rest of the hardware so different that I can't use one of the GSM ones, for example?
-av
Click to expand...
Click to collapse
Yes.
Only CDMA Roms
Sent from my SPH-P100 using XDA App
Hey guys I just bought a sprint galaxy tab of craigslist today in perfect condition but it is rooted and its on froyo 2.2. Im getting really confused in what sections and all and thread to find a unroot method. Im fine with rooting my phone but this is my first tablet and I want it updated to GB but when I go to the settings it says its updated
Which model you got?
Why do you want to UNroot?
Just go to Overcome thread, download guide/roms, flash your device and will have GB.
Then if you wish you can flash CM9 and have ICS/Tablet optimized OS.
TheATHEiST said:
Which model you got?
Why do you want to UNroot?
Just go to Overcome thread, download guide/roms, flash your device and will have GB.
Then if you wish you can flash CM9 and have ICS/Tablet optimized OS.
Click to expand...
Click to collapse
I got SPH-P100 DJ30. I want to unroot to get the OTA since im on 2.2. Flashing a rom will work to, a stock rom which you are able to get a OTA. I just got it and not sure if it has CWM on it or not. Im not real fimilar with Samsung rooting techniques as most of my phones have been HTC. I have a stock rom downloaded ready to go, the only thing is im not at home and our wifi is out so im at a friends house and need to get to odin to flash the rom. I have odin on my computer at home as I have done it before, but im going brain dead and cant for the life of me figure out the site or download wise how to get the odin root program
removed
Edit: sorry, missed the CDMA part, please don't use my earlier info, as this is GSM only!
Verstuurd van mijn GT-P1000 met Tapatalk
Eric1985 said:
Hey guys I just bought a sprint galaxy tab of craigslist today in perfect condition but it is rooted and its on froyo 2.2. Im getting really confused in what sections and all and thread to find a unroot method. Im fine with rooting my phone but this is my first tablet and I want it updated to GB but when I go to the settings it says its updated
Click to expand...
Click to collapse
DO NOT install OVERCOME rom or ICS for P1000. You will break yout G-tab!!!
You own a CDMA. and the above instructions are all for GSM. I hope I am not too late.
No not to late. Thanks guys. Im just using it for wifi so I don't need the free wireless tether one of the things with rooting. I just wanna get off this old 2.2 and just found the galaxy tab series kinda confusing. I did my epic touch fine, but with Verizona and Sprints, only wifi versions all of it is getting me frustrated ha but thanks again guys
Sent from my EVO using xda app-developers app
Didn't want to leave it like this... Perhaps this can help you, but please make very sure that this is exactly the same version:
www thegalaxytabforum com /index.php? /topic /4653-sprint-tab-soft-bricked/ page__st__20
Looks like a solution, but perhaps you've already seen this... Please note that you have to insert the dots and remove the spaces on the above link.
Good luck
Verstuurd van mijn GT-P1000 met Tapatalk
KasSGT said:
Didn't want to leave it like this... Perhaps this can help you, but please make very sure that this is exactly the same version:
www thegalaxytabforum com /index.php? /topic /4653-sprint-tab-soft-bricked/ page__st__20
Looks like a solution, but perhaps you've already seen this... Please note that you have to insert the dots and remove the spaces on the above link.
Good luck
Verstuurd van mijn GT-P1000 met Tapatalk
Click to expand...
Click to collapse
if what you want is to get rid of froyo, why don't you try to flash this GB2.3.4 rooted for sprint. You need to learn how to use odin though.
http://forum.xda-developers.com/showthread.php?t=1161033
or take a look at this:
http://forum.xda-developers.com/showthread.php?t=1341666
follow the instructions carefully, and DO NOT do this if you are not ready to break your tab.
Ya I have used Odin before for my S2. My tab is working just fine, but it's just the OS is older and some apps wont work on it. And to top things off we changed internet companys so it won't be till Friday unless we head to my parents to use their internet. But when I connect my tablet to the computer earlier I had Odin up, should it have recognized what was plugged in and in the header should it have said the tablet information? It still had EL29 from my S2 a few months ago when I had it and rooted it but nothing changed.
Sent from my EVO using xda app-developers app
Eric1985 said:
Ya I have used Odin before for my S2. My tab is working just fine, but it's just the OS is older and some apps wont work on it. And to top things off we changed internet companys so it won't be till Friday unless we head to my parents to use their internet. But when I connect my tablet to the computer earlier I had Odin up, should it have recognized what was plugged in and in the header should it have said the tablet information? It still had EL29 from my S2 a few months ago when I had it and rooted it but nothing changed.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
THat's strange but should be ok. I think you have odin 1.7 instead of 1.83.
Odin may not recognize your tab if you did not check "USB Debugging" mode.
It should recognize your tab as an android device right away if you already check USB Debugging mode.
But if you follow the second link, it will unroot your tab back to 2.2 unrooted stock -- using heimdell.
sorry about these noob questions...but let start:
1. i got an att&t 8.9 3.2 honeycomb os. what is the latest os (official or unofficial) out there now that works smoothly with my device meaning everything works, front and back camera, sound etc. links would be great.
2. i'm getting ipc communication popup error every once in awhile. what does this error mean? how do i get rid of this error. i assume if i update to latest os, the error will be gone? btw, i dont have a sim card inserted in my device, so i don't really know if its matter?
3. my device sometime auto dim. how do i turn off auto dim if i want it to stop?
4. how do i get kies? do i install it on both my device and pc? if on my pc, where is the install file?
thx in advance.
vincentnyc said:
3. my device sometime auto dim. how do i turn off auto dim if i want it to stop?
4. how do i get kies? do i install it on both my device and pc? if on my pc, where is the install file?
thx in advance.
Click to expand...
Click to collapse
Not familiar with your device but I'll give it a try anyway.
3: Press the time in lower right corner and then set a fixed brightness.
4: Kies for windows is avalable on Samsung webpage. Search for your device on support and then select software.
Kies for wifi is awailable on google play and is only needed if you want to syncronize over the air.
Did a search for ROM's but just came up with a custom here on xda. Hopefully someone else will help you.
Scania-patriot said:
Not familiar with your device but I'll give it a try anyway.
3: Press the time in lower right corner and then set a fixed brightness.
4: Kies for windows is avalable on Samsung webpage. Search for your device on support and then select software.
Kies for wifi is awailable on google play and is only needed if you want to syncronize over the air.
Did a search for ROM's but just came up with a custom here on xda. Hopefully someone else will help you.
Click to expand...
Click to collapse
i did a search on android market for kies and all it came up was kies air from samsung. it is basically for sharing files between your tab 8.9 device with any devices on your wifi network. is that it? if yes, i thought kies allow you to update your os to the latest os if there are any from samsung via wifi. if no, where is the actual kies on android market? thx in advance.
vincentnyc said:
i did a search on android market for kies and all it came up was kies air from samsung. it is basically for sharing files between your tab 8.9 device with any devices on your wifi network. is that it? if yes, i thought kies allow you to update your os to the latest os if there are any from samsung via wifi. if no, where is the actual kies on android market? thx in advance.
Click to expand...
Click to collapse
Kies air (app) is for syncronizing your tab (files/contacts/music...) by wifi via Kies installed in your computer. It's not a wifi sharing tool.
Kies for PC is downloaded from Samsung webpage to your computer, not on to yor tab via market
If you install Kies in your computer and then plugin your tab (via cable) to it you can update the tab's system aswell as syncronize files (faster than wifi)
I dont think it's possible to update system via Kies air.
The official ics works great. Cm9 also has everything working. If i were u i would stick to the official ics.
For the 2 and 3 i really cant help u.
Sorry.
Sent from my LG-P500 using xda app-developers app
pedrotorres said:
The official ics works great. Cm9 also has everything working. If i were u i would stick to the official ics.
For the 2 and 3 i really cant help u.
Sorry.
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
How do i get official ics for my att 8.9? Links would be great...steps by step instructions.
vincentnyc said:
How do i get official ics for my att 8.9? Links would be great...steps by step instructions.
Click to expand...
Click to collapse
I suspect your tab isn't rooted. Then you should download Kies.
Go to the Samsung webpage, select support and then manuals and downloads.
Choose your device (you can choose the 7310, it makes no differens when downloading Kies)
When Kies is installed just plug in your tab and choose "update firmware"
Look for my post about flashing the us version o your P7310. If cant find out i'll help u.
Cheers.
Sent from my LG-P500 using xda app-developers app
And here's the link to the ODIN ICS http://www.hotfile.com/dl/169458139/5cca4ab/P7310UELPB_P7310XARLPB_XAR.zip.html
A step by step guide for odin you'll find in the 7310 development department. Good luck
So for a beginner, which one is easier for me to do? Go to samsung website download kies and update my firmware to ics or do odin?
Also I read on some threads after some ppl upgrading their os, they had charging problem. What kind of problems are these and what are the steps to take to get rid of these problems? What do you need to do before you upgrade your os?
Thx in advance.
vincentnyc said:
So for a beginner, which one is easier for me to do? Go to samsung website download kies and update my firmware to ics or do odin?
Also I read on some threads after some ppl upgrading their os, they had charging problem. What kind of problems are these and what are the steps to take to get rid of these problems? What do you need to do before you upgrade your os?
Thx in advance.
Click to expand...
Click to collapse
The charging problem relates to people who updated their P73x0 with an image ported from the Tab 10.1.
I am not sure which Tab you have. Is it an 8.9 3G or an 8.9 LTE?
If it's an 8.9 3G model, and you don't mind not having support for a SIM card, then the modded / rooted image from the 7310 will work for you. If you ahve the LTE version then this image is definitely not suited for your device. So be careful!
I have a 3G model myself, currently without sim card. I decided not to wait anymore and flashed the modified 7310 ICS image onto it. I am completely happy. Everything works, except the sim card (because the image is for the wifi-only tab) and it is a lot smoother and faster than the honeycomb image.
Image is found here: http://forum.xda-developers.com/showthread.php?t=1858251
You'll need to root your device and flash CWM. All is explained in this thread: http://forum.xda-developers.com/showthread.php?t=1406137
Have fun!
vincentnyc said:
So for a beginner, which one is easier for me to do? Go to samsung website download kies and update my firmware to ics or do odin?
Also I read on some threads after some ppl upgrading their os, they had charging problem. What kind of problems are these and what are the steps to take to get rid of these problems? What do you need to do before you upgrade your os?
Thx in advance.
Click to expand...
Click to collapse
This is based on the assumption that your'e not rooted and using a stock ROM.
The easiest way is to update via Kies:
No need for root
Coming from stock ROM most apps will continue to work
You wont void warranty
No special effort required from you
The battery issues some have had is best avoided by upgrading with a full battery (no garanties though)
I did my upgrade via CWM. I did a full wipe and then formatted system, cache and data folders before updating (all apps and settings are lost)
I haven't had any problem, actually my tab has better stamina now.
vincentnyc said:
i got an at&t 8.9
Click to expand...
Click to collapse
not sure but as far as I understood from reading elsewhere, the AT&T tab is an LTE version, with wholly different hardware. if so, stay away from Odin flashing p7300/7310 ROMs !
Yes in the back of my 8.9. It does say 4g lte. So I guess I got the lte version. If I got the lte version, I guess none official ics update yet? If not, are there any unofficial version of it anywhere? If yes, is the unofficial bug free and can someone provide a direct link plz? Tia.
vincentnyc said:
Yes in the back of my 8.9. It does say 4g lte. So I guess I got the lte version. If I got the lte version, I guess none official ics update yet? If not, are there any unofficial version of it anywhere? If yes, is the unofficial bug free and can someone provide a direct link plz? Tia.
Click to expand...
Click to collapse
Did a search for you...
http://forum.xda-developers.com/showthread.php?t=1569122&highlight=lte
http://forum.xda-developers.com/showthread.php?t=1614189&highlight=lte
Scania-patriot said:
Did a search for you...
http://forum.xda-developers.com/showthread.php?t=1569122&highlight=lte
http://forum.xda-developers.com/showthread.php?t=1614189&highlight=lte
Click to expand...
Click to collapse
thx. hmmms...it seems like these 2 roms, ppl are having problem with drivers like the usb charging not working and it stops during the modem. i guess no roms is working perfectly yet. sigh....guess i have to wait for the official ics for my att 8.9.
vincentnyc said:
thx. hmmms...it seems like these 2 roms, ppl are having problem with drivers like the usb charging not working and it stops during the modem. i guess no roms is working perfectly yet. sigh....guess i have to wait for the official ics for my att 8.9.
Click to expand...
Click to collapse
That's right. Besides, the Rom for the LTE are all Honeycomb so there's nothing to gain.
Kies works just like ota updates. Samsung is responsible for them.
Odin you are the one responsible and u must do all the work.
I did it by odin.
Cheers.
Sent from my LG-P500 using xda app-developers app
vincentnyc said:
thx. hmmms...it seems like these 2 roms, ppl are having problem with drivers like the usb charging not working and it stops during the modem. i guess no roms is working perfectly yet. sigh....guess i have to wait for the official ics for my att 8.9.
Click to expand...
Click to collapse
Took this from an other thread. Hope you'll find it helpfull.
nrvate said:
Details at http://forum.xda-developers.com/showthread.php?t=1701865
A bit more zippy than the stock ROM due to the reasons listed on that thread. Otherwise, it's Samsung's honeycomb image.
Yes, android native tethering, both WiFi and USB, is enabled.
If you still think it's slow, get a new launcher, twlauncher (touchwiz) is kind of a beast...
You can overclock it to 1.7ghz or so and it'll still be reliable, at least that's my experience.
The ATT ICS ROM is in test with the carrier. It'll probably be out in a month or two. Samsung should also release the ICS kernel source around then, after which you'll likely see some custom ICS images -- Nobody wants to bother making custom HC images OR trying to get an ICS kernel working on this device before Samsung releases a proper one -- Several have tried and found it quite a task.
Click to expand...
Click to collapse
dmunjal said:
ICS is out for the WiFi versions. The LTE version should be available with Odin or Kies before ATT offers it via OTA.
Click to expand...
Click to collapse
Scania-patriot said:
Took this from an other thread. Hope you'll find it helpfull.
Click to expand...
Click to collapse
i rather not go thru all the hassle just for honeycomb mods.
but something does seems to interest me. it said about overclock to 1.7 ghz. how do i find out on my current 8.9 how many ghz is it running right now. and how do i overclock to 1.7 ghz? i assume you need to get some kinda apps from android market? if so what apps is it and is it free?
and what is touchwiz (twlauncher)? where can i get it? is it on the android market also?
thx for everyone help.