Database Develop

After flashing Gingerdx V22 stuck on SE screen upon Reboot

I installed it again, then i rebooted it and now i'm stuck on the sony ericcson white screen. what did i do wrong?
before that i proceeded to install xrecovery and busybox.
any luck or hints?

Restore/Repair with SE Companion, I experience that too, after few reboots with GX V22, that rom will eat your battery.

this is my second time, restore/repairing. is there anything im doing wrong?

evergreenjustin said:
this is my second time, restore/repairing. is there anything im doing wrong?
Click to expand...
Click to collapse
perform a fullwipe from the recovery menu and install rom

evergreenjustin said:
this is my second time, restore/repairing. is there anything im doing wrong?
Click to expand...
Click to collapse
Tell us the exact steps you perform and how? If you assume you're doing something wrong then you should at least tell us what you do so we can tell if there's something wrong.

I instaled busy box, srecovery, successfully install and used gingerdx. I change my user settings, dl/set up the apps, I even updated to the baseband 15. On the first restart, it will then freeze at SE logo screen

evergreenjustin said:
I instaled busy box, srecovery, successfully install and used gingerdx.
Click to expand...
Click to collapse
I take you typoed and meant "xRecovery" ...
Well, right there's your problem, mate.
GINGER DX V014 AND LATER NEED TO BE FLASHED THROUGH CLOCKWORKMOD RECOVERY!
If you flashed GDX v022 through xRecovery it's no real wonder it doesn't work.
EDIT: To quote doixanh's post ...
Requirements
- Rooted
- ClockworkMod Recovery (v014+)
- Latest kernel and latest baseband xxx015
- Desire to delete Stock SE's Eclair
Click to expand...
Click to collapse
You know, it's even written in the instructions.

thats really my fault...sorry

[Q] Need help ! Can't instal any custom room on my X8 !

I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english

Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus

tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
which ROm are you trying to install? Please provide more info on your problem, so we could help you better

tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
There are some problem that causes custom rom cannot boot. I will state the problem but, you gonna go search it for yourself.
1.Busybox not correctly installed
2.Root incorrectly
3.Baseband incompatible
4.Rom need custom kernel to work (Extra care.)

tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped

AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
Also THE MAIN ONE make sure usb debugging is enabled

I do that all the time when i trying..

I do this for some times..5 or 6..whit different rooms. all the time stucks at sony logo and i can't enter in xRec or CWM..i restore it whit seus

przemek4113 said:
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
Click to expand...
Click to collapse
I do that all the time when i trying..

AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
I do that..for 5 or 6 times..it fails!

tujamo1 said:
I do that..for 5 or 6 times..it fails!
Click to expand...
Click to collapse
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further

A little stupid hint...
Are you sure you are stuck at se logo? I mean, have you wait enough? Sometimes it gets up to 5 min to start and especially first time...
Sent from my E15i using xda premium

I think I understand you problem here
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps

Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD

so as mine can any one know how to upgrade 11W42

it is probably the fact you need custom kernel. But before trying to unlock bootloader, turn phone off,, take back cover and battery off and check your phones date ie
10w56 or 11w34 etc
Sent from my X8 using XDA App

sambavadekar said:
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Click to expand...
Click to collapse
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App

CKKnot said:
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
Click to expand...
Click to collapse
Thant's man. It work!

wilbso said:
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
Click to expand...
Click to collapse
I'm do this all the time when i flash a new rom. But a had make my phone work. Thanks anyway!

samu1player said:
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
Click to expand...
Click to collapse
My baseband ends with .......15

miniCm9 3.0.3 not booting.....

Hi,
I just recently unlocked my bootloader and attempted to flash the nAa-ics-004 kernal on my X8.
After booting into ClockworkMod Recovery I wiped and flashed MiniCm9 3.0.3.
Now when I boot, I get stuck on the "nAa" screen and the logo keeps repeating itself but I can still press back to get into recovery.
So how can I boot into minicm9 now?
Ummmm.... help would be nice.
EDIT: I'm a noob, I unlocked with X8Toolbox, flashed with flashtool but flashtool only said "loader.sin is flashing" or whatever it says, should it say both? I did select both loader.sin and kernal.sin using SHIFT.

Yharooer said:
Hi,
I just recently unlocked my bootloader and attempted to flash the nAa-ics-004 kernal on my X8.
After booting into ClockworkMod Recovery I wiped and flashed MiniCm9 3.0.3.
Now when I boot, I get stuck on the "nAa" screen and the logo keeps repeating itself but I can still press back to get into recovery.
So how can I boot into minicm9 now?
Ummmm.... help would be nice.
Click to expand...
Click to collapse
are u using nAa ics kernel or reflash nAa kernel

It says "2.6.29.6-nAa-ics-C..." but the rest goes off the screen.
I think I flashed the ics nAa.

Yharooer said:
It says "2.6.29.6-nAa-ics-C..." but the rest goes off the screen.
I think I flashed the ics nAa.
Click to expand...
Click to collapse
is your baseband 15

Yharooer said:
It says "2.6.29.6-nAa-ics-C..." but the rest goes off the screen.
I think I flashed the ics nAa.
Click to expand...
Click to collapse
Reflash the ics kernal..Download here http://forum.xda-developers.com/showthread.php?p=24304432
Turn on your device..wait for 3-5min..
Make sure u flash the gapps for ics

Yharooer said:
Hi,
I just recently unlocked my bootloader and attempted to flash the nAa-ics-004 kernal on my X8.
After booting into ClockworkMod Recovery I wiped and flashed MiniCm9 3.0.3.
Now when I boot, I get stuck on the "nAa" screen and the logo keeps repeating itself but I can still press back to get into recovery.
So how can I boot into minicm9 now?
Ummmm.... help would be nice.
EDIT: I'm a noob, I unlocked with X8Toolbox, flashed with flashtool but flashtool only said "loader.sin is flashing" or whatever it says, should it say both? I did select both loader.sin and kernal.sin using SHIFT.
Click to expand...
Click to collapse
If install finished was there install satus 0?

fotak-x said:
is your baseband 15
Click to expand...
Click to collapse
Right now I'm not at my computer but I think that may be the reason why.
Ummm... If you don't mind how do I upgrade, (preferably only thru flash mode only)
Any help would be much appreciated

Yharooer said:
Right now I'm not at my computer but I think that may be the reason why.
Ummm... If you don't mind how do I upgrade, (preferably only thru flash mode only)
Any help would be much appreciated
Click to expand...
Click to collapse
okay
1. first check your baseband is xxx015 (if not, you can find the baseband from B.jay folder and flash it!)
2. Root your phone
- with flash tool by clicking the padlock icon
OR
- copy these files (password=cintaindonesia) and extract on your SDcard, copy paste to system\bin with rootexplorer
4. then unlock bootloader by s1tool or flashtool (NOT FOR 11w29+ !!!)
5. flash the latest ICS kernel
6. backup
7. factory reset, wipe data, etc
8. flash the ROM
9. Done!

Thanks!
Thanks alot guys for your help! I now got MiniCM9 working! Thanks once again.

Yharooer said:
Thanks alot guys for your help! I now got MiniCM9 working! Thanks once again.
Click to expand...
Click to collapse
your'e welcome dude!
nice!

stuck with samsung logo

HI, my gnote is stuck in samsung logo while restarting,
if i should Reflash stock ROM with ODIN which ROM i should select, pls help me out
gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI, KERNEL- SPEEDMOD

Hi there,
Are you still able to go CWM? if you are still able to, make a Nandroid backup, wipe dalvik cache and cache partition and reboot recovery and system and check if your phone's able to bypass the Samsung log after. Give it a time as well to wait.. perhaps 10 mins or so.
By the way I'm just curious, what did you do to make your phone stuck to it's samsung logo in the first place?

still same prob
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me

Can you post call recorder thread link you tried to flash?
Sent with L0VE

baz77 said:
Can you post call recorder thread link you tried to flash?
Sent with L0VE
Click to expand...
Click to collapse
i dont have the link but i can give u the file attached

sunilkm77 said:
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Click to expand...
Click to collapse
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.

ok, I am not pro enought to figure out what's happening in zip.
Id recommend factory reset on safe kernel, or reflashing rom, then reflash safe kernel.
Considering I have no clue on zip, a clean install might be called for. On safe kernel and safe kernel recovery a format system/data might be needed to fully clean this stuff out. But I am not sure about that.
Why do you need call recording anyway?
edit: all at own risk ofc
Sent with L0VE

Moon2 said:
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
Click to expand...
Click to collapse
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,

sunilkm77 said:
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
Click to expand...
Click to collapse
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.

letters_to_cleo said:
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
Click to expand...
Click to collapse
Thanks for the link but im confused which ROM to install coz there are so many,

sunilkm77 said:
Thanks for the link but im confused which ROM to install coz there are so many,
Click to expand...
Click to collapse
hmm....which region or country are you in by the way?

letters_to_cleo said:
hmm....which region or country are you in by the way?
Click to expand...
Click to collapse
India

Flash kl3 india from post #2 of above said thread(first line on my signature is same)
After flashing successfully you may face force closes, dont worry and just reboot in recovery and wipe cache and data. It shiuld b solved.
Sent from my GT-N7000 using xda premium

i tried http://forum.xda-developers.com/showpost.php?p=29846310&postcount=2
now my phone is fine time to install all software's :") thanks a lot

I have to use pc odin to fix the problem
I think i wipe too many time while flashing.
Like 2 times wipe cache and 2 times wipe battery stats etc
Sent from my GT-N7000 using xda premium

Help me pls THX

i recently had flash the custom rom of ics but when i reboot its work normal while is the second reboot image a XPERIA logo came out and keep flashing but i wont bring me into my homepage... can any1 help??
sorry for my bad english...

turn it off and back on?

Mefalo said:
i recently had flash the custom rom of ics but when i reboot its work normal while is the second reboot image a XPERIA logo came out and keep flashing but i wont bring me into my homepage... can any1 help??
sorry for my bad english...
Click to expand...
Click to collapse
Which ICS rom ?? MiniCM9 ?

try to reflash kernel and rom again
just for the last choice..and dont forget to wipe dalvik cache then factory reset

More details = we try to help
Less details = barely no help
Sent from my X8 using xda app-developers app

Mefalo said:
i recently had flash the custom rom of ics but when i reboot its work normal while is the second reboot image a XPERIA logo came out and keep flashing but i wont bring me into my homepage... can any1 help??
sorry for my bad english...
Click to expand...
Click to collapse
may be install some thing that not good and suitable with your rom try full wipe and if dont solved re flash your rom