Database Develop

[Q] How can I unbrick my X8?

Hy all, my X8 was frozen while installing CM 7.1 Stable, then it turned off. When I tried to turn it on it stuck at the SE logo, then freezed. I tried to get into my recovery and recover my phone, but I couldn't. Then i tried to repair it via PC Companion, but it said: ,,Your ip address is not allowed to update or repair brown phone. Please conect to the SEMC network." . Then I tried to flash 2.1 via Flashtool but it said install or reinstall my drivers. I did it, but the error came up again. Now I don't know what should I do to repair my X8. People said I should use SEUS but I couldn't find a working one for X8. If you can help me, please do!
Thanks for reading this thread, ChongWiz.
Sorry for bad english, I'm hungarian.

Install Gordon's Gate drivers inside flashtool's directory. Then try to flash newest original update by pressing back button through flashing. Flashtool should find your device and install smoothly. If you still have problems with drivers install newest PC Companion.

ChongWiz said:
Hy all, my X8 was frozen while installing CM 7.1 Stable, then it turned off. When I tried to turn it on it stuck at the SE logo, then freezed. I tried to get into my recovery and recover my phone, but I couldn't. Then i tried to repair it via PC Companion, but it said: ,,Your ip address is not allowed to update or repair brown phone. Please conect to the SEMC network." . Then I tried to flash 2.1 via Flashtool but it said install or reinstall my drivers. I did it, but the error came up again. Now I don't know what should I do to repair my X8. People said I should use SEUS but I couldn't find a working one for X8. If you can help me, please do!
Thanks for reading this thread, ChongWiz.
Sorry for bad english, I'm hungarian.
Click to expand...
Click to collapse
This may sound funny but it is real. Try the same process what you have done in another computer. I had the problem as you in my laptop. When I tried the process on my desktop computer it was like butter and I restored my phone software in just 15 mins.
I cant say the reason or logic behind but it worked.
Just have a try, you may succeed as me.

U can simply go to cybercafe or just work with another computer that all..
cheers

problem:
My friend had accidently deleted his \system folder and due to that,the phone on rebooting was stuck at the sony ericsson logo and would not go any further
solution:
1) charge the phone
2)download SEUS
3)connect usb port to pc.
4)Launch SEUS
5)When asked to plug the phone,plug the USB into the turned off phone(by removing and reinserting battery) and press the <-- and power button together and keep pressed until led turns green
6)the phone will be updated via SEUS
---------------
HIT THANKS IF THIS HELPED

[Q] Xperia x8 bricked

Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !

This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.

yes
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
thanks mate i will try it now

lol
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.

also
also flash tool in the console says that it cant determine what deviec i am plugging into and cant display what is busybox version or anything like i am putting an unknown device...
27/043/2012 15:43:10 - ERROR - Cannot identify your device. Found sh while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)

Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289

yes
Nev51289 said:
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
Click to expand...
Click to collapse
Yes do as the guy above said...No need to root your phone

Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way

lol
Nev51289 said:
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
Click to expand...
Click to collapse
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)

eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Why don't you download the store Rom annd use Flashtool to flash it? Then you may be able to upgrade to latest revision with PCC.

eastman47 said:
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
Click to expand...
Click to collapse
Can I consequently delete Busybox? If it is a deleteable app that is!

use the update service

eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Yeah, I lost you somewhere... If after taking out the battery, you CAN NOT enter xrecovery or CWM, then, you either can try THIS THREAD <--- go on, click on it!, or, you have to do what I had to do a couple of times, which is to restore your X8 to its original state, and to do that with Sony PC Companion, you first have to UNINSTALL your current PC Companion!!! THEN, restart your PC, and install a clean version of Sony PC Companion 2.1!
IT DOESN'T MATTER IF YOU HAVE THE LATEST VERSION of PC Companion, YOU STILL HAVE TO UNINSTALL IT, AND INSTALL IT AGAIN!!! IF YOU DON'T, THERE's a 99% CHANCE THAT PC COMPANION WILL NOT RECOGNIZE YOUR PHONE!!! ...I don't know why, but it's probably some marketing trick, since I once used this method 3 times in a row, then the fourth time PC Companion didn't recognize my X8. This happened on both, the old PC Companion, and the current Sony version 2.1. I tested them both on purpose, to eliminate the possibility that I damaged my X8's hardware somehow, during a high speed impact collision with the bedroom wall...
Once you reinstall Sony PC Companion 2.1, go back to my first post to your problem, and follow it step-by-step.
AND yes, if you want to install custom ROM's again, then you will have to ROOT your phone again, and UNLOCK the BOOTLOADER, etc...
BUT, if it's a soft-brick, then you might be able to redeem yourself
ViVA FIDELINO!

how about kernel?
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
>> how about kernel? for example your phone allready back to 2.1 rom and you are using custom kernel before i done this update? like kernel aA-11? is it possible to turn on phone even if im using custom kernel? please give me steps how to bring it back, because im currenty using mini cm7 / kernel aA-11, and i want to bring back my xperia x8 to original rom and kernel

Try downloading the stock rom and a diff version of flashtool. I can't remembet which version is most recommended (try searchibg xda - i read it here). install drivers in flashtool's driver folder (gordon's gate) then try again. Almost the same thing happened to me. PCC won't recognize my phone so I couldn't install the drivers.

X8 stuck at SE logo
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...

Maybe u can also try sus (sony update service). I have experience this n done with sus.
Me n my W8:-D

Vishal9890 said:
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Click to expand...
Click to collapse
The best way, if u still can't get on your phone , is take it to the SE Customer care. And don't tell a word about rooting or anything. Just ask them to repair the phone, saying that one morning, the SE logo kept on popping up.
Sent from my XPERIA W8 using xda platinum

I have YouTube video tutorial on my channel - search GaganSJ1 in YouTube and scroll down till you found
Press thanks if it helped
Sent from my E15i using XDA

eastman47 said:
Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
Click to expand...
Click to collapse
check out this video http://www.youtube.com/watch?v=l7B-7tDaB5U
press thanks if it helped

No sign of life from Xp X8

Hi. I think I've bricked a phone. First, it was somehow soft-bricked, so I wanted to repair it. I read somewhere on the forums, that flashing into it may help. So I did that. I followed the steps and saw that a green light appeared. I wanted to check if PC Companion repair would work then (the program is installed on other computer), but didn't know how to turn-off the flash mode, so I just quit the FlashTool. Then the phone didn't start again and I'm now screwed. Is it really a hard-brick? Please, help me. It was not my phone :/

Install SEUS (Sony Ericsson Update Service) that should help u to go back to stock rom, and be ok.

Filar1 said:
Hi. I think I've bricked a phone. First, it was somehow soft-bricked, so I wanted to repair it. I read somewhere on the forums, that flashing into it may help. So I did that. I followed the steps and saw that a green light appeared. I wanted to check if PC Companion repair would work then (the program is installed on other computer), but didn't know how to turn-off the flash mode, so I just quit the FlashTool. Then the phone didn't start again and I'm now screwed. Is it really a hard-brick? Please, help me. It was not my phone :/
Click to expand...
Click to collapse
if your phone is not 11w29+ its okay..maybe just soft brick
and u can flash it into stock kernel again eclair 2.1
u can download from my signature
BUT
if your manufacture phone is 11w29+..ehhmmm i dont know dude

Can you explain what had you done before you "soft-brick" your phone?
Actually, how to quit the flash mode in your phone is just plug out your USB Cable, if the flashing process haven't finished, don't plug it out anyway.
(If you could understand my language.. Hehe)
Try to flash it again.

http://forum.xda-developers.com/showpost.php?p=35338935&postcount=2

I'm not sure if you guys understood me. I can't even get into Sony Ericson logo screen now. The PC Companion doesn't see the phone. I'm currently downloading the firmware and will try to flash in 10 minutes.
@MatthewWu: I unlocked bootloader, installed xRecover or sth like that, and then installed the zip file with romfrom phone's flashcard. If it's important, I changed some assert(<text here>) lines to just one assert() in /META-INF/com/google/android/updater-script, cause the installation didn't work without that.
The phone is 10W42.
Yup, I can't flash into it. Nothing happens when I follow the steps.

Try to flash Original Flash File and follow the steps correctly. (2.1-eclair)
I think that you didn't flash the right kernel when you install the ROM's zip file.

[Q] xperia t soft brick help please

hello
i flashed this http://forum.xda-developers.com/showthread.php?t=2378400 however phone turn on but it dont have launcher so i tryed to flash cwm recovery which im not able to do so then i went to pc companion however when i do connect my phone as instructed i dont get greeen led which will confirm and staart of installing software. is any way that i can fix my phone
hope for fast reply
sory for english but im reali desperate n drunk ;/

Make sure you know how to connect in flashmode and that you have the drivers installed.
pccompanion should work with the correct drivers.

Serious problem.Phone not booting!

My phone unsuddenly bricked after I reboot my phone.Can't even boot into recovery cause Sony logo appear for a second and turned off.My phone even don't charge.I tried to flash stock rom via flashtool but phone not detected or after pressing vol down button nothing happened.I also tryed to use fastboot mode to flash boot.img but nothing happened though My phone can turn into fastboot mode.What should I do now?Senior XDA members please help.:crying:
Edit:how can i fix adb "device not found" issue?I installed all the necessary drivers but still not solved. Can't flash stock rom because vol down button not working but the button is fine.
Edit2:How can I fix adb driver issue that not recognizing my phone?
Problem solved!

Maybe died flash boot

Chum.zuizui said:
Maybe died flash boot
Click to expand...
Click to collapse
So is that mean my phone hard bricked?

Røbin said:
So is that mean my phone hard bricked?
Click to expand...
Click to collapse
Yes.i think so

Chum.zuizui said:
Yes.i think so
Click to expand...
Click to collapse
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.

Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that

Røbin said:
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Click to expand...
Click to collapse
Yes.good luck for you

hagar006 said:
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Click to expand...
Click to collapse
ZR driver exist in Sony developer website and I installed the driver but I don't know why my computer not recognizing my phone.My phone can turn into fastboot mode(blue light on when pressing vol up and connecting cable to pc) but when I type command "adb devices" the listed device is empty I mean no adb fastboot device found.I'm just asking the drivers are not working beacuse of windos 10?Actually when after I use custom rom I couldn't connect my phone to pc.So any driver can fix this problem?I searched really hard on google but couldn't find any proper sloutions.

Chum.zuizui said:
Yes.good luck for you
Click to expand...
Click to collapse
This isn't helping!

Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there

hagar006 said:
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
Click to expand...
Click to collapse
I know you are trying to help me but I tried everything and nothing is working.I installed driver from flashtool but still no clue why pc not recognizing my phone.My phone is like a live junk.My phone soft bricked many times and I could recover my phone with flashtool so I know what to do but this problem is way more confusing.I just need to know what is causing this issue.

You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..

hagar006 said:
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
Click to expand...
Click to collapse
Flashtool is the best tool to recover soft bricked phone I know but this problem is way more complicated.
Thanks that you tried to help me.I hope I'll figure it out some time later.

Røbin said:
This isn't helping!
Click to expand...
Click to collapse
I dont meant it like that .did you fix it

Chum.zuizui said:
I dont meant it like that .did you fix it
Click to expand...
Click to collapse
Unfortunately no.For some reason pc not detecting fastboot device even after I installed fastboot driver.

same problem plz help
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone

pralay445 said:
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
Click to expand...
Click to collapse
My problem was created because local charger damaged my phone battery.So I couldn't turn on my device like yours.I replaced the battery and charger from Sony Center and now my phone is good as new.So Try to use other good battery(small or similer size that suites to your phone's battery pin)and see if your phone turns on without any issue.Then you can target the problem.