Database Develop

[help] xt1064 flashable but stuck on warning bootloader

Hello...im new here
Im with a xt1064 with bootloader unlocked, i can start on fastboot and flash a new rom with adb, the problem is:
It stucks on warning bootloader, i can't access recovery or any of the options on fastboot because it goes to warning bootloader message and still there until battery runs out.
Ps: i can flash a new rom without problem, but when the device reboot, it stills on warning. Is there any way to solve this? Thanks and sorry for the bad english.

ur able to into fastboot thats good try restoring to original stock firmwire and than if it goes succesful try to try the procedure again.. mayb u missed some step or so?
Sent from my Moto G 2014 using Tapatalk

My Huawei P9 is stuck in bootloop i think?

Hi, i have tried to remove my root and unlocked bootloader as I didnt think they were correctly installed in the first place. Also I wanted to install a new oem update that it keep reminding me of in the background. So now after doing alot of things found in forums and youtube I have come to an end point were the phone just comes to the bootscreen, "your devise has been unlocked and cant be trusted." from here it is just stuck with the "your devise is now booting..." then nothing happens so I realy need help now, otherwise I will have to buy a new phone within the next days.. I cant still get into the twrp and format/wipe data etc, so is it something in here I need to fix then?
Anyone that can please help me out a bit?
Regards Kristoffer

I'm having the same issue. I am unable to flash a custom rom or an official rom. One issue I am having is that I can not relock the bootloader as I get an command not allowed. Please can someone help with this issue.
Thanks
Sent from my SM-G928F using Tapatalk

I have the same issue try to flash stock ROM 182 and latter or directly 132, is important to flash 132 BCS is the only really complete rom

Luigi Ra said:
I have the same issue try to flash stock ROM 182 and latter or directly 132, is important to flash 132 BCS is the only really complete rom
Click to expand...
Click to collapse
But I cant get into the twrp anymore, only the fastboot and recue mode and the huawei erecovery mode, and in this the wifi just gives me failed to download the package or something like that.... ://

I managed to get in recovery by running the oem unlock. The problem I have is that I am unable to lock the bootloader again.
I really want to get the phone working again. I don't want to have to send the device to a Huawei Service Centre since the bootloader has been unlocked.
I really hope someone can help us all get the device back to stock firmware.
Thanks

How did you get to the recovery mode? I cant get to the twrp anymore, i think i did something wrong and wiped data or formated it so now i can only se bootup screen, or huawei logo or get to fastboot and rescue mode. There it says phone unlocked and frp (or something) in green letters lock....? And also the huawei erecovery which i cant do anything in...

I run fastboot oem unlock and flashed twrp using fastboot.
I have managed to flash update.app, Default_hw.app, Default_normal.app and Default_eu.app using an app called DC Phoenix, but now when the phone boots it goes in to eRecovery and the touchscreen doesn't work. Even when I flash twrp again the touchscreen still doesn't work.
Please can someone advise what to do to get the touchscreen and the other phone back to normal.
Thanks

Were i find a link for step by step rooting my huawei p9 lite. I have company from amateurs pretty good ones. So i cant make mistakes. Thnx for the help...rock the world wild and free whopppaaa

Moto g6 hard brick after ota update

Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP

msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
Hold power and volume down til reboot into "bootloader" mode, plug usb-c cable to PC, then reflash later stock rom

msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
Just power up directly to bootloader holding power + vol down, then reflash the latest official firmware for your device. As long as it is the official firmware for your device you don't need to unlock bootloader.
BUT if you brick it with an updated bootloader thats more recent that the OG firmware available for your device, sadly you have a cute paperweight until an official firmware with a more up to date bootloader is available. It happend once to me with a G4 Play have the device useless for a good 2 months until a firmware with a new bootloader was available. It sucks.

You have to go to the service center.
Hey msobarzoe13, I am using moto g6 and from India. When android p soak test was leaked as everyone out there, I tried it. It was good except for some network issues. So I decided to revert back to the stock firmware. I downloaded the OS and flashed it and faced the same issue. I tried several times but no luck. I was not even able to unlock the bootloader because I didn't turn on OEM unlock under settings. So I took it to the service center. The best part is by installing Beta your warranty is void. So I did it through the service center. They told Moto G6 series is very secured so flashing it with a leaked software is prevented. I don't know why. So don't take a further risk, take it to the service center.

Omar04 said:
Just power up directly to bootloader holding power + vol down, then reflash the latest official firmware for your device. As long as it is the official firmware for your device you don't need to unlock bootloader.
BUT if you brick it with an updated bootloader thats more recent that the OG firmware available for your device, sadly you have a cute paperweight until an official firmware with a more up to date bootloader is available. It happend once to me with a G4 Play have the device useless for a good 2 months until a firmware with a new bootloader was available. It sucks.
Click to expand...
Click to collapse
What you mean with "OG firmware" and what if the motorola is totally hardbricked? I mean not able to go to bootloader or recovery or even fastboot because he didnt turn on android debugging oem?

msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
If your bootloader is still locked just take it to a moto service centre, I also tried downgrading and took it to service centre they fixed it

I have also hard bricked my moto g6 while updating. There was an OTA update and i started update without noticing my battery percentage. Now i have hard bricked dead moto g6. There is no response at all. Only life in my device is that it is detected as Qualcomm HS-USB QLoader 9008 in pc.

My Moto G6 went into Hard Brick after downgrade and upgrade, does not go into download mode and does not turn on, just flashes the led.
Does anyone have a solution.
Thanks.

Jefersonrr said:
My Moto G6 went into Hard Brick after downgrade and upgrade, does not go into download mode and does not turn on, just flashes the led.
Does anyone have a solution.
Thanks.
Click to expand...
Click to collapse
Same problem with me also. It may be detected as qualcomm hs-usb qloader 9008 while you connect in pc. If that is the problem than we need blank flash file which is not available right now. Either we have to send our device to service center for motherboard replacement or we need to wait for blank flash file which is not possible to come because these files are sensitive to motorola. another solution is if some one provide me mmcblk0.img of moto g6 than i might be able to boot it from sd card and may revive it again.

My Moto G6 Ali got hardbricked also plzzz help anyone solved it or have blankflash HE
Do anyone got any solution regarding this then plzzz help
:crying::crying::crying::crying::crying::crying:
Or email me at
??
[email protected]
Please help

Boot loop unable to fix (bootloader is locked)

I am having the infamous boot loop on the Mi Logo. It keep on non stop. After few attempt, I manage to get it to stay in fastboot.
So, I am trying to flash using miflash tool in fastboot. However it says unable to flash because my phone bootloader is locked. Anyone can help how to flash or fix this boot loop problem on a bootloader locked phone?
Thanks.

[Help][James][Sprint] Need help to force EDL mode

Hi i have a model XT1921-5. It got stuck in the logo screen and couldnt boot into recovery so i tried a rescue with the RSA, it detected the phone in fastboot and found the firmware but failed flashing it. Now it only boots into fastboot.
When flashing the firmware manually only gpt.bin fails but the phone is still stuck in fastboot (failed to validate hab image - failed to validate boot image. same with recovery image). I tried everything i could but nothing worked out.
I think my only "chance" is to try a blankflash. The problem is that my bootloader is locked (never unlocked) so i cant do fastboot oem edl, i cant find anything about test points for this model.. So im looking for a way to maybe hard brick the phone to force it boot into EDL mode and try the blankflash. Unless there's a way to set the OEM unlock option via fastboot..
I appreciate any help.
Thanks in advance.

I was able to put my phone on QDL mode via test point.
Now i tried to flash the blankflash but it throws the error "XML (0 bytes) not validated"..
Does anyone knows what this error means? If is a version mismatch then i cant find a newer version of this blankflash..
Any help is always appreciated.
For anyone interested this is the test point you need to short to boot into QDL mode