Related
I recently installed O2X GB rom..its nice and smooth except for one thing , I cant get data connection , wiffi works great , but when I put wifi off I have no internet connection(yes data is enabeld), I d/l apn and I see the settings are correct I also tried getril to make sure I have the correct ril and baseband,I used the 622 GB baseband and Still no luck? Anybody have any ideas on what Im doing wrong?
I used the 622 GB baseband
Click to expand...
Click to collapse
you can't use that baseband, it's only for T-mobile G2x CMIIW. you should use antoher baseband m8
Of course it's not for the G2X, their radio versions are nothing like it.
I presume you are able to make voice calls/SMS currently? You don't have 'Unknown' as the baseband version?
I got it working ,
I checked my APN's they where on default Fido, I just enabled data when roaming and it worked, I guess thats why I had a r on top of the signal bars, But the question is why deos my cell go on roaming?
R - Roaming
ok so after doing a lot off searching and reading , I found a way to get rid of the " r " roaming , on the dialer I enter *#*#4636#*#* - phone setting - scroll down and turn radio off then on , and the r vanishes , only working with CM7 unfortunatly!! I tried it on th new 2.3.4 GB rom and no luck!! any Ideas ?? anyone?? , I noticed that the user " netuser " is on telus and he is using the 2.3.4 GB rom , I wonder if he has the R problem also ?
Just wondering if anyone has found a solution to this? I'm currently on baseband 1035.21 firmware 2.3.4 and using o2x flair on version v20l
I'm oppening this topic because i see that some users has network issues on the gingerbread releases. That's happens since first v20 build.
I had tried all the possible basebands and ril's, but the result is always the same: instable connection.
- Connection die suddenly and just returns after reboot
- Sometimes the signal of network drop and returns again
- At TIM operator cant get the "H" icon on topbar just 3G, with i can VIVO can get it H normally (it's not a feature, believe in me)
I guess that's something related to baseband because for some users everything goes normal.
Tested basebands:
725 for Gingerbread with matching ril
622 for Gingerbread with matching ril
725 for Froyo with matching ril
0622 for Froyo with matching ril
Hope someone can help, i really love the new Gr4 release, but i can't abdicate data connection for sure.
PING TIMEOUT STATISTICS http://dpaste.com/637671/​
Problem solved:
1) Disable 'Automatic date/hour settings' on Settings > Date/Hour > Uncheck Automatic
2) Disable or change NTP parameter. In my case, i downloaded the ClockSync app (available at market) and set mannualy the NTP server of my country (in case br.pool.ntp.org)
I really don't know what the relation but until now, i get a stable network connection.
Hm, I tested 823 BB with matching RIL and I have to say that everything is fine
By the way: I have TopoGigis GB Release v1.8 SP1 (didn't want to upgrade since everything's working...^^)
TheSSJ said:
Hm, I tested 823 BB with matching RIL and I have to say that everything is fine
By the way: I have TopoGigis GB Release v1.8 SP1 (didn't want to upgrade since everything's working...^^)
Click to expand...
Click to collapse
It's good for you. Im seeing thats not a general issue, happens just with some mobile operators.
Unfortunally here i cant get a stable signal, im pretty sad about that.
I have no problem here too with bands, running 622..
if I were you, I'd stick with the baseband that came with your phone, it was intended by your carrier..
Sent from my LG-P990 using Tapatalk
droweed said:
I have no problem here too with bands, running 622..
if I were you, I'd stick with the baseband that came with your phone, it was intended by your carrier..
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
I already try that, same results.
Have you tried set dns pro? i dont know if it'd make any difference for you, for me it does.
When opening the app for the first time, it shows the phone is using google dns (8.8.8.8). i changed it with open dns, it went better. Still a bit slow (the ping, maybe), but better.
punyategar said:
Have you tried set dns pro? i dont know if it'd make any difference for you, for me it does.
When opening the app for the first time, it shows the phone is using google dns (8.8.8.8). i changed it with open dns, it went better. Still a bit slow (the ping, maybe), but better.
Click to expand...
Click to collapse
Already tried that, no sucess.
The slow speed doesnt bother me, the bad thing is the network drop.
I got those signal drop on 725 /614 /622 / 823 Baseband...
Best was 622 but with horrible voice on call !
Since CM 146 the 725BB don't work (many signal drop) so i try Miui with same result...
PS : i use getril to match RIL but sometime the BB is unknown and only restoring backup works..
Sorry for asking, I not so familiar with your problem.
Have you installed any apps in your phone, or the problem exists with untouched= after the rom installation?
622 for Gingerbread with matching ril ? please post link
fonsigno said:
622 for Gingerbread with matching ril ? please post link
Click to expand...
Click to collapse
http://android.modaco.com/topic/335494-12-aug-smartflash-stock-baseband-release-103521-20110725/
Get the ril with GetRil on Android Market.
afpapa said:
Sorry for asking, I not so familiar with your problem.
Have you installed any apps in your phone, or the problem exists with untouched= after the rom installation?
Click to expand...
Click to collapse
Untouched. That happens since the first gb release.
sebennett said:
I got those signal drop on 725 /614 /622 / 823 Baseband...
Best was 622 but with horrible voice on call !
Since CM 146 the 725BB don't work (many signal drop) so i try Miui with same result...
PS : i use getril to match RIL but sometime the BB is unknown and only retorin backup works..
Click to expand...
Click to collapse
What is exactly your configuration?
622 baseband for gingerbread or for froyo? The same question for RIL.
Thank you.
@felipemadox
Did you try BB 622 (gb) + standard cm7 RIL 218 + Network set to 'gsm auto prl' (after very reboot!) + No time syncing via android settings (use external app for this)??
This seems to be pretty damn stable! At least for me.
felipemadox said:
What is exactly your configuration?
622 baseband for gingerbread or for froyo? The same question for RIL.
Thank you.
Click to expand...
Click to collapse
725 GB works great with CM under 146 !
To be honest i try all BB available at temasek sharefolder with matching RIL (with Getril)
Configuration CM ROM with stock kernel and then MIUI
koboltzz said:
@felipemadox
Did you try BB 622 (gb) + standard cm7 RIL 218 + Network set to 'gsm auto prl' (after very reboot!) + No time syncing via android settings (use external app for this)??
This seems to be pretty damn stable! At least for me.
Click to expand...
Click to collapse
I guess that i cant use RIL 218 because im on Modaco Gr4 2.3.4. I already try the gsm auto prl and no luck with stability.
What means the "time syncing via android", i did not understand. Explain, please.
felipemadox said:
I guess that i cant use RIL 218 because im on Modaco Gr4 2.3.4. I already try the gsm auto prl and no luck with stability.
What means the "time syncing via android", i did not understand. Explain, please.
Click to expand...
Click to collapse
Disabile ntp server sync and automatic time sync from network.
ntp server sync and clock sync is already disable...
i don't have pin code asked any more so no network...and baseband is unknown !
Also tried with Gr4 based ROM but signal drop is still there...
PS @ Felipemadox : Those options are in the clock options
Topogigi said:
Disabile ntp server sync and automatic time sync from network.
Click to expand...
Click to collapse
Where did i font these 2 options?
I'm currently using MIUI ROM 2.3.7 (build MIUI-1.12.2)
baseband: 1035.21_20110405
kernel: 2.6.32.45-cyanogenmod ([email protected]#1)
Curently having network breakdown issue. might have a few breakdowns in a day, sometimes don't have. do i need to upgrade baseband or kernel? can anyone help me please. i'm having a lots of appointment daily as i can't have breakdowns so often.
I don't understand what you mean by breakdown? Is it complete loss of signal? If it is then this happened to me in the galnet's latest weekly and ICS build. I don't know about the ones from miuiandroid or miui.us, as I haven't tried them. But if they share a similar base, then theoretically they should share similar problems unless some post-release fixes were added like those of galnet.
To recover, these worked for me most times:
reboot
manualy trigger network registration
I'm back to CM now. It's most stable and usable for me.
ya, totally loss of signal. its bored to keep rebooting all the time. i dont feel like using the basic android layout/UI rom. MIUI is nice but got some issue. sigh.... anyway, thanks for replying. anyone else would like to help me out???
Well I used 218 bb before, jumped over to 823 and matching ril. No more breakdowns.
Sckank said:
Well I used 218 bb before, jumped over to 823 and matching ril. No more breakdowns.
Click to expand...
Click to collapse
This is good news. Will try. Where'd you get 823?
I got it from temaseek's media folder
kolo2x said:
This is good news. Will try. Where'd you get 823?
Click to expand...
Click to collapse
You can get it from Temasek's mediafire link. Huge thanks to him..!
But flashing this is little tricky. You need to extract the file, then flash the .fls files begining from the biggest file to the smallest - in this order.
flash R375_SIC.fls
reboot the phone
flash AENEAS_FW.fls
reboot the phone
slb.fls
reboot the phone
psi.fls
reboot the phone.
I use smartflash to flash basebands, that is available in the same link.
Hope this helps.
Sckank said:
I got it from temaseek's media folder
Click to expand...
Click to collapse
Lol...great minds and that...!
Thanx Divyan Im at work so its great you give a proper reply
really thanks to u.
No Problem, guys.. Glad that I could be of some help - so little comparing to what we get from XDA.
In the meanwhile, I did test MiUi 1.12.2. too. I used to get this problem of MiUi goes to airplane mode at times.
Then I have flashed Owain's Tweaks. I did make a difference. Phone did not got into airplane mode anymore. Above this I have flashed ironkernel too ( seeking better stability - with undervolt settings of -25 v using pimpcpu).
This combination worked good for me for a couple of days without any issues. Then I jumped back to CM7 Kangs .
You might give this combination, if you feel like.
I'm using 1.11.4 and been having a few issues recently with loss of signal and a reboot was the only thing that fixed the problem. I found that I had a mismatch of baseband and RIL. S I used getril from the market and everything seems ok now. Only had it on for a day so far but it's been fine...
Helllo. I have it the same problems with the network. My phone was losing signal on all roms, cm7, miui, modaco, until i flash the baseband 07 25 and everything works well. Tomorow i will try the miui rom to see what happens.
divyan, i crash my set now. miui did not work on my 2x. tried flashed cm7 and kang. installed but did not boot up after 10 mins each. i downloaded LG RIL and GetRIL.
LG RIL did not mention if my RIL match with the baseband or not. but GetRIL says my baseband does not match with my RIL. i did follow your steps to flash the 823. not working thou.
now in CWM i can backup but i kenot restore. its automatically unmount the /system. darn. i think something wrong with my 2x.
seriously can u teach me how to redo all the stuffs?
i really like miui!
vladutz9 said:
Helllo. I have it the same problems with the network. My phone was losing signal on all roms, cm7, miui, modaco, until i flash the baseband 07 25 and everything works well. Tomorow i will try the miui rom to see what happens.
Click to expand...
Click to collapse
yes bro, do remember to share your experience. seriously headache have to reflash and resetting the 2x all over again and again. kinda stressed!
vladutz9 said:
Helllo. I have it the same problems with the network. My phone was losing signal on all roms, cm7, miui, modaco, until i flash the baseband 07 25 and everything works well. Tomorow i will try the miui rom to see what happens.
Click to expand...
Click to collapse
i have the same problem, with EVERY rom.
currently on 0725 baseband, V20L october version, nothing different: i got signal loss once-twice a day.
tried BB 0208, 0315, 0405, 0602 as well.
I 'll have to try 0823 with 4 separate files, as suggested in this thread
My phone always goes into airplane mode (by itself) after a reboot and a few hours of sleep time - im on cm7 with 725. Once that's done I just set the airplane mode off and it stops disconnecting from the network...
currently running on cm7 night #204 with 0823 and 0208 RIL. been good so far but got issue once i flash ironkernel. dunno why.
It seems to me that the most common problem people are reporting with CM10 is related to the network, caused by the new RIL in the ROM. For those of us who actually use our phones as phones, this is not good! Also, any attempts to change the RIL via the GetRIL app, regardless of network or region, seem to cause a complete network loss.
So I thought I'd start a thread to consolidate everyone's accounts of their network experience with the new CM10 nightlies. Please post your region, carrier, and baseband, as well as a brief summary of any problems you have (if any). Getting all this info together in one clean list would be very helpful in assisting RC when he debugs.
I'll start here.
Region: Ontario, Canada
Carrier: Fido (subsidiary of Rogers Wireless)
Baseband: V21b (stock Fido baseband, never changed)
Problems: Signal bars fluctuate rapidly compared to CM7, on 3G. EDGE is less of a problem. Call quality is not affected so far. Able to make and receive calls and SMS.
Edit: Unsure if this is baseband/RIL related, but when I am calling through my in-car bluetooth handsfree, the bluetooth tends to disconnect itself and cut off my call.
Edit: List of basebands can be found on Tonyp's thread: http://forum.xda-developers.com/showthread.php?t=1658047
The same thread shows instructions on how to flash new basebands, along with download links.
I have also added a poll. Users can select multiple options if they find more than one baseband works.
Edit: OMFG, I forgot to add the V30 SU660 option in the poll and I can't figure out how to edit the poll... can a mod help me out?
From TrymHansen : http://forum.xda-developers.com/showpost.php?p=33504944&postcount=408
I've installed the BB From TonyP Thread >http://forum.xda-developers.com/showthread.php?t=1658047 Named 0420-V20m_SU660-Baseband
After, i've full-wipe and install the last nighlty with gapps.
Now, Date Hours is OK, battery look good.
ps: I don't know how to do a "strike" ------ but battery drain with that
What's the matching BB to the RIL that comes with CM10? I'd rather go that way than changing the RIL...
EDIT: Forget it, already checked the baseband thread in development, gonna flash the matching BB now
LarsPT said:
What's the matching BB to the RIL that comes with CM10? I'd rather go that way than changing the RIL...
Click to expand...
Click to collapse
Should be v30a
I installed cm10 nightly
Baseband: v20q europe
Ril: v10b
Im experiencing problems with call.
When ppl call me i cant hear them or they cant hear me.(85% times this happens)
Any solution plz?
Also sometimes my phn just keeps doing constant vibrating..have to remove battery n restart.
hirentherock555 said:
I installed cm10 nightly
Baseband: v20q europe
Ril: v10b
Im experiencing problems with call.
When ppl call me i cant hear them or they cant hear me.(85% times this happens)
Any solution plz?
Click to expand...
Click to collapse
+1
BB v20c
Ril default
Sent from my LG-P990 using xda app-developers app
Just use the 218 BB and stop worrying about ril.
Sent from my LG-P990 using xda app-developers app
I flashed many roms (stock Froyo/GB, CM, MIUI) using every time the updated baseband for Italy and I always forgot about ril and everything was fine; only once, following all the technical suggestions, I used getril to match bb/ril and had bootloop.
Now I have 20S bb and flashed CM10 nightly: wifi, phone voice/data and gps work fine.
EDIT: suggestion, download the bb of your country and forget ril
Well, two very different opinions... which of them is right? Baseband flash ou RIL?
korgndm said:
Well, two very different opinions... which of them is right? Baseband flash ou RIL?
Click to expand...
Click to collapse
I had 725 BB in the beginning... which was ok... then I flashed the most recent BB (non SU660) and I was very happy with it, better battery, better reception stability... so for me, the more recent the better, that's why I'll start by trying flashing the most recent BB instead of going back in RIL.
EDIT: Even if it's the toughest way to start!
I previously had the stock V20S (flashed the KDZ). With V20S BB, no problems with JB. No call issues, SMS issues, nothing. Stable signal. Local operator: Claro.
I have a very strange bug...I knew when I was in the unofficial builds that I had 0725 V10d BB, now the system shows that o have LGP990AT-00-V20Q-262-XX-JAN-24-2012+0...is it a bug or something? I recall that ROMs don't change basebands...Is anyone else having this bug?(I have wiped everything and I had also installed the new nightly and nothing changed)
Sent from my LG-P990 using xda premium
Andy HOT said:
I have a very strange bug...I knew when I was in the unofficial builds that I had 0725 V10d BB, now the system shows that o have LGP990AT-00-V20Q-262-XX-JAN-24-2012+0...is it a bug or something? I recall that ROMs don't change basebands...Is anyone else having this bug?(I have wiped everything and I had also installed the new nightly and nothing changed)
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
Your system says that you have 20Q bb and the system doesn't lie.
BTW, do you have some connection problems with CM10 or is it just a cultural problem?
---------- Post added at 04:41 PM ---------- Previous post was at 04:36 PM ----------
korgndm said:
Well, two very different opinions... which of them is right? Baseband flash ou RIL?
Click to expand...
Click to collapse
Do you have any problems?
Well I want to know why did cwm flash change my BB?..also I have worse signal then before and I have a bad download speed through 3g..and I dont know if BB is the problem here but I also have some problems in call sometimes(the one to whom I'm talking isn't hearing me)
Sent from my LG-P990 using xda premium
Why dont you link the basebands from ics in first post? I`m sure many would appreciate it
dark_sat said:
I previously had the stock V20S (flashed the KDZ). With V20S BB, no problems with JB. No call issues, SMS issues, nothing. Stable signal. Local operator: Claro.
Click to expand...
Click to collapse
I also have the same BB from V20s. Here are the issues that I saw in CM10, without changing RIL:
1. My phone number is shown as Unknown (in "About Phone").
2. Unable to see any contacts on my SIM card.
3. Unable to read a carrier's voicemail setup from my SIM card (need to configure access number manually).
4. Auto time is way off (need to set the time manually).
No problems with the actual functionality (signal strength, call audio quality, SMS, USSD codes). My location is Canada, Pacific time zone.
---------- Post added at 09:28 AM ---------- Previous post was at 09:21 AM ----------
Andy HOT said:
Well I want to know why did cwm flash change my BB?
Click to expand...
Click to collapse
Flashing CM10 from CWM definitely didn't change your BB. Something else must have been done on your phone...
Andy HOT said:
Well I want to know why did cwm flash change my BB?..also I have worse signal then before and I have a bad download speed through 3g..and I dont know if BB is the problem here but I also have some problems in call sometimes(the one to whom I'm talking isn't hearing me)
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
It has to be the RIL. Basebands are not affected by flashing the ROM, except for maybe the stock ROM. But custom ROMs like CM don't do anything to the baseband at all.
E.g. I've flashed CM7.1, CM7.2, and CM10 on my phone and the baseband has remained exactly the same as it was on stock froyo.
Region: Kerala, India
Carrier: BSNL
Baseband: v20i
Problems: unable to hear calls. everything else is fine it think
I can confirm that all issues with 0521 BB (no audio in call, bad time, etc) are solved with 0420 BB and default CM10 RIL.
Carrier: Orange
Region: Spain
Baseband: 0521 (v20s)
Problems: No audio in calls, bad time zone, random data drops...
Everything solved changing BB to 0420 SU660.
After install CM10 i lost the signal and battery status, please help me
BB 0725 V20Q
Hi all,
owner of an old Galaxy S GT-i9000.
I've installed CyanogenMod 10.1-20130501-nightly-galaxysmtd directly from old standard Samsung installation.
It works fine (Apollo have some crashes but I can wait a stable version)
But there is a problem about modem.bin file and settings.
My offices are partially shielded so with the standard Samsung OS the modem signal go up and down like a yoyo but works (a lot of patience) depending also from position (no openable Windows ... http://forum.xda-developers.com/images/smilies/frown.gif )
With the CyanogenMod (also with stable version and not only with nightly) the line don't exist ...
Not only but if I go along the street the line is off ... I must restart the phone and all works with good performances.
I'm thinking that the modem.bin in CyanogenMod is for a different country of mine.
I'm in Italy and my provider is Wind.
Maybe there is a better (older?) version of modem.bin for Italy & Wind?
So I can install it via Odin in the phone or insert the zip file in internal SD and load it in recovery mode.
Any suggestion is accepted ... I can also testing several versions if it is necessary
Please an help is appreciated ...
Hi...I would suggest you to download getril from the market and check if your ril and baseband versions match...if not you can have some pretty bad problems when it comes to reception.
Also when ril and baseband don't match you can get the, i think it was the jvu ril from the app itself....then flash the jvu modem from here
http://forum.xda-developers.com/showthread.php?t=1870460
Another thing that could be is, that the 3g reception in your area is a bit weak....try to force 2g networks and check if it is getting better for you
chainer1 said:
Hi...I would suggest you to download getril from the market and check if your ril and baseband versions match...if not you can have some pretty bad problems when it comes to reception.
Also when ril and baseband don't match you can get the, i think it was the jvu ril from the app itself....then flash the jvu modem from here
http://forum.xda-developers.com/showthread.php?t=1870460
Another thing that could be is, that the 3g reception in your area is a bit weak....try to force 2g networks and check if it is getting better for you
Click to expand...
Click to collapse
The reception 3g or 2g is weak because the building is "shielded" (many iron and iron gates so it seems a faraday's cage) ...
I'll try to dl the app you suggest me and I try to use the jvu modem version ... the std should be the jw4 ...
thank a lot I'll give you all feedback
help me plzz...
i upgraded my galaxy s to ics from gingerbread (jw4) and install cyanogenmod 9 rom now i m nt satisfied with ics and got stuck.. i want to get back to gingerbread ....anyone plz help me