i need ur help
my X1 is jammed in the startup
screen (Sonyericsson) logo and
it aint getting beyond it,..
i'v tried to flash any rom but its
not working.
i can enter the bootloader but
wont install any rom (jammed in
loading)
i referd to this post
forum.xda-developers.com/showthread.php?t=520377
i do have the same problem
i cannot hspl via pc it's stuck at 0%
neither using sd card it's stuck at loading... Like i said above
the bootscreen shows
KOVS110
SPL-0.78.0000
Microp1-787
Microp2-707
plz help me...
The problem started when 1st I hspl from 0.72 to 0.78
I successfully did it using x1_hspl.exe software
then again using kovskyadvancedruu.exe I performed task 29 after which the my X1 phone got stuck at sony logo:-(
then I started using seus and thought i'll get my rom back by updating it...
But it became worse than ever the seus changed my rom image from 0.78 to 0.78.0000:-(and it does not have option to reflash like seus of preveous version had i even tried to update using previous version but the software is not responding to sony server... Its because of outdated version
after that neither i'm able to downgrade my rom image nor able to install any new rom or rom image via pc or sd card please help me:-(
guyz plz plz help me out.... :-( I want my cell to start again please please please !!!
Hey, sometimes when I get my x10 jammed. I put phone to sony ericsson update service and update phone. Thats all what need to do. Try that
PC companion is crap it doesn't work like that.
the 0.78 h-spl is better than the 0.72, so that in itself shouldn't be a problem
as it says 0.7800 that means you are still on stock, h-spl from olinex didn't work (x1_hardspl.exe), otherwise the bootloader would display 0.78.OliNex
so in case you want to try flashing you can only use stock roms anyway
any image used on sdcard has to be renamed to Kovsimg.nbh before flashing, did you do that?
I hope you did backup your personals before trying to flash, because when all else fails than you should try to hard reset to get your device to boot again
the hint with again connecting to SEUS is also to be considered
Best
solved at last!!!!
yes i had renamed to Kovsimg.nbh before flashing...
sorry for late reply
at last soved
0.78.0000/0.780000 is a valid rom image
at first i thought it might have mixed up by 2 different rom images (0.72.0000 and 0.78) i know its stupid
here are the steps i did
1. connected x1 to usb and went to bootloader screen (by pressing on~off switch and vol down)
2. downloaded the stock rom from this link " http://forum.xda-developers.com/showthread.php?t=1343192 " (thanx to ElectroDoc )
there are 2 parts linked by ElectroDoc
3. using KovskyAdvancedRUU.exe performed task 28
to detect rom create a folder and move both KovskyAdvancedRUU.exe and r3a rom in same folder
(NOTE the KovskyAdvancedRUU.exe only detects when placed in same page or folder)
huuu.... and finally it WORKED MY X1 STARTED!!!!
for further info if you have to install any custom rom
use X1_HardSPL.exe
downgrade your rom image to 0.72 and install your desired rom (i have not yet tried to install a custom rom using 0.78.0000 rom version)
and yes r3a rom is very stable and best battery performance
and at last
thanx to ElectroDoc and ultrashot for helping me especially ultrashot...
Related
Hi,
I have my mobile updated with Dutty's ROM version Ruu_Signed_Dutty's_HD_V2.1_XTREME_5.2.21018.1.6.0_Test4 from HTC original shipped ROM without issues. I decided to try the Miri_WM65_21198_V5.2_Premium ROM using BlackstoneRUUWrapper.exe. Every time I try it struck on 0% on mobile phone screen and on computer screen. I tried Ruu_Signed_Dutty's_HD_V2.1_XTREME_5.2.21018.1.6.0_Test4 and it also strucked at 0%. After waiting for many minutes BlackstoneRUUWrapper.exe gives Error 262 and ask to follow reccovery. Any idea guys what could be the issue. Due to this I am not able to update any ROM on my mobile now.
Is there any other software for ROM update instead of BlackstoneRUUWrapper.exe that I can try?
zeshan77 said:
Is there any other software for ROM update instead of BlackstoneRUUWrapper.exe that I can try?
Click to expand...
Click to collapse
Have you installed HardSPL, or have you used USPL for flashing your first rom?
You can try to flash it withouth using your PC at all. Format your sd card, rename the image to "BLACIMG.nbh" drop it on the card.
Power off your device, and hold the volume down button, while powering it on again.
Maybe you used USPL to flash it the first time?
If you did you have to use USPL again to flash a new rom or install HSPL to avoid this problems again.
I used the BlackstoneRUUWrapper.exe that is I think HardSPL and flashed my first ROM using PC (Windows XP). I didnt install any thing on mobile before hand... right now I am trying to do second ROM flash and where I am failing. I suppose although my first flash ROM is running fine but I did some thing or missed some thing that is stopping me flashing second time... ? any further help if I can still flash using PC?
Guys Sorry i am ignorent about HardSPL and USPL but I used the BlackstoneRUUWrapper.exe that shows version 3.27.4.3 for first ROM (Dutty's)flashing.
Use HardSPL
I think you are not using the hardSPL. Go to Dutty's latest ROM page and install the hardSPL like is explained on his page.
After this worked, you can follow the instruction like mentioned above...
Here is link of page: http://forum.xda-developers.com/showthread.php?t=498326
Rename the rom file to BLACIMG.nbh and put it on your SD card. Make sure you have enough battery power, don't connect to pc, and push power button while holding volume down. Follow instructions...
Thanks Dutchprop , after updating to HardSPL every thing worked fine. Thanks again for your help ...
zeshan77 said:
I used the BlackstoneRUUWrapper.exe that is I think HardSPL and flashed my first ROM using PC (Windows XP). I didnt install any thing on mobile before hand... right now I am trying to do second ROM flash and where I am failing. I suppose although my first flash ROM is running fine but I did some thing or missed some thing that is stopping me flashing second time... ? any further help if I can still flash using PC?
Click to expand...
Click to collapse
If you didn't install nothing on your phone you're missing HSPL, install it and try again.
Hey all,
I was trying to upgrade my Topaz to WM6.5 and obviously something went wrong.. Now when I turn the phone on, it goes to the tri-colour screen but displays the message Upgrade ROM code error please try again. After that, it goes to the white loading screen and just stays there until the numbers 00068002 in red appear at the top of the screen. Then it goes back to the tri-colour screen. I've searched the forums and tried some of the suggestions out there. Nothing has worked! Was wondering if someone could really halp me out with some step by step instructions!! Thanx in advance!
PS: I have HardSPL 1.83 installed already. That installation went well without any problems. It was when I went to flash the rom this happend.
i would suggest downloading another ROM (try the orginal ROM of your language http://forum.xda-developers.com/showthread.php?t=576620) and copying the TOPAIMG.nbh onto your storage card (ROOT DIRECTORY). now turn the phone on by pressing volume + and power button and then follow on screen instructions.
good luck!
dont worry, just a bad flash because of a corrupted rom
redownload the rom or any other rom.
use the card flasing as described by Drag-on or remove the storage card, (just tomake sure it does not see the rom image on it). connect it to pc. wait untill it shows usb on the 3color screen. wait untill the pc is finished installing drivers and then start the customRUU. that came with the rom you are insatalling
that should do the trick
success
Here's the thing, when I connect the phone to the PC, the PC can't find the phone anymore.. Well, it is connected, but it's not showing up on the computer.. I also don't know the original rom language for my phone.. My serial number begins with HT947L, anyone know?? I tried installing from the computer but it gives me the invalid vendor ID error..
ur computer is not suppose to read it like it would normally. (it wont recognize it in device center) but its connected. use the ruu that comes with the roms u download and u should be able to reflash ur device and dont worry its not bricked.
if u trying to do it manually rename RUU_signed that u get when u download a rom. rename it to topaimg and copy it to the root of ur microsd. then insert the card into the phone and turn it on. now ur phone should recognize the new rom and ask u if u want to install it. hope this helps
I haven't been able to find a rom that works.. I've tried several roms.. I rename them TOPAIMG.nbh and put it in the sd card but it never works. The phone will go to the loading screen and then the numbers 00068002 in red appear and then it just goes back to the tri colour screen with the words Upgrade ROM code error please try again. It just stays there after. When I try to do it manually from my computer it keep sgiving me the Invalid vendor ID error. I'm totally stuck.
I don't know if this will help, but when trying to do it manually, the program says I don't have a img on the phone. the version of the img I have is just left blank.
Update: Thanks for everyone's help! I finally found a rom that actually worked. It installed and everything. I still don't know why it had to be that certain rom and I still don't know why I couldn't flash from the SD card method. I'm really just happy everything is up and running again. I'm never flashing my phone on my own again.. lol.. If anyone knows why I couldn't flash from my sd and why I had to get a certain rom even though I had HARDspl installed please let me know. I would like to know just for future reference.
any other way to flash the rom beside used the sd card , because when i when to boot load tri color screen it say no image file , so any one please help .
Did you hard SPL it, and are you sure you renamed the file correctly?
yes i did and try find a way used pc to flash it , anyone know
hey, sorry i aint an expert but have you flashed the rom to the root of the memory card, turned the phone off, taking the battery out for 3-5 seconds, re-installing the battery then holding down the volume down button and at the same time th epower button, this should then display the bootloader mode, then everything is basically automatic, and just follow the on screen instructions, down forget to hard reset after installation!
yongh said:
yes i did and try find a way used pc to flash it , anyone know
Click to expand...
Click to collapse
The ROMS ive installed recently tend to come bundled with RomUpdateUtility.exe which allows you to install the rom from your desktop via usb link.
Here's the ROM library:
http://forum.xda-developers.com/showthread.php?t=477801
Scroll down to:
II - FLASHING TOOLS & UTILITIES
Choose:
- ROM Update Utility (RUU) for X1 with instructions - App to flash ROMs from PC
Follow instructions:
DONE!
Hi folks!
I hope that you can help me:
I have to restore the stock spl on my xperia in order to get the keyboard and a case crack repaired!
The initial situation was like this: X1 hard spled with custom fw.
I first downloaded a german vodafone rom and flashed this rom with the sd card method: Renamed the firmware to kovsimg.nbh, copied it to sd and flashed via hardspl. I rebooted the phone and the standard tom booted just fine.
Then I downloaded "ruusigned_072stockspl.zip" from this thread: http://forum.xda-developers.com/showthread.php?t=431218
I extracted it, renamed it to kovsimg.nbh and flashed it... after the flashing process (the bar was full which means it flashed 100% to me) the phone showed "loading" for a while... after like 10mins I put out the battery.
The phone now starts into tricolour screen even if I dont press power+down.
its on stock SPL (shows SPL-0.72.0000) and it says "Continue to Upgreade ROM... please wait" but nothing happens..
what steps should I take from there on? I ve attached a screen which shows the tri colour screen.
Did I brick my X1?
Don't think you got much more options then try to reflash the spl. Maybe that will fix this. Do you still got usb access in this tri color mode?
nope, I dont get a usb connection
With spl you mean I should try to reflash hardspl?
If I have no hard spl, is it possible to flash a original rom with a sd card only?
HellSassa69 said:
nope, I dont get a usb connection
With spl you mean I should try to reflash hardspl?
If I have no hard spl, is it possible to flash a original rom with a sd card only?
Click to expand...
Click to collapse
pls compare your problem with this post and see if the solution (under Edit) also applies for you
gl
DrakenKorin said:
pls compare your problem with this post and see if the solution (under Edit) also applies for you
gl
Click to expand...
Click to collapse
thx for your advice I am sure that this will be the solution - stupid thing is: like the guy in the post you linked I have lost my micro sd to SD Adapter and therefore I cant write the stock firmware to my card -.- stupid thing...
In a hour I ll rush away, buy a adapter and then try to flash the stock rom but as it sounds from the thread the scenario is the same so I think it will work.
EDIT: This was the solution I downloaded the stock rom from the sticky thread in the Rom Section from XDA, extracted it to the sd root and renamed it kovsimg.nbh. Put sd card into X1, started X1 which automatically booted into tri colour screen - I only had to press power to porcede and everything is finde now after the flashing process! Stock rom and stock spl on my X1 thanx
simple!
i had the same problem...just rename the original rom.image to RUU_Signed.nbh then open hardspl (dnt push next)and replace the file push next ,update and it;s done!don't worry if u see the error at 0 % try to open the x1 after that and it would be fine
Hi guys
i had a problem while updating the rom of my x1 from an old release of energy rom to a new 826x Series. this wasn't the first time i did it, after it says Update Success, i've rebooted my phone and it freeze with the SonyEricsson image.
I've tryed to reflash the new Energy rom again and it give me the same result.
what i've to do?
when i flash it only update KOVSIMG.nbh and OS and says OK on both.
i remember the first time i did, it had to update RADIO and other 2 things....
let me know!
Thx 2 every1
If possible download it again...might be corrupted file.
Has happened to me also couple of times.
Thread removed to Q&A as not Rom Dev, please post in the correct section
Thank you
Badwolve1
thanks mal, i've just flashed other 3 times then with no more hope i left it a night with the SonyEricsson logo on his screen and in the morning i culdn't belive my eyes it has started WinMo!
Enter in boot mode! (color screen)
Download RUU.
Rename rom "KOVGSIMG.NBH" to "RUU_signed.nbh" and copy to RUU folder.
Open RUU (Rom Update Utility). And next next next...
RUU will ask to you connect the device! Now you connect USB cable to PC and follow the steps.
Before this, if your x1 isn't booting, we have a ROM problem. You will need to download another one...
Sorry for English.