Related
tomorrow ...
I'm loving my samsung rooted galaxy's i9000've played it up the following ROM: "Ultibread-V1.3"
and my problem you see in the photo, I hope you can help quickly ...
http://img862.imageshack.us/i/img20110312031518.jpg/
thats just gingerbread!
it should boot normally
Did you flash i9000XWJV1 using odin?
Ultibread works perfect for me ,flash it via odin with the proper instructions and stuff,then flash a "froyo" kernel with odin again with auto reboot off,when finished remove battery and go into recovery and select ultibread.
I've done with this pattern.
Many thanks to the hardworking developers and "Original Poster" Envy and dreamox rider, as well as redbull320 for the note!
Edit by Spine 11/29/2010
This root is u.g. "Old" versions Eclair (Android 2.1) to August 2010.
Please do not make this if your Froyo (Android 2.2) did!
EVERYTHING AT YOUR OWN RISK! I POCKETPC.CH AND ASSUME NO RESPONSIBILITY, IF THERE SOMETHING WRONG SHOULD GO!
NOTE: This description is pretty old and the attached FILES OBSOLETE! QUOTE: "Tested with the firmwares XXJF5 (JFB) and XXJG5"! WHO IS WITH OTHER / NEWER VERSIONS TRY TO MAKE IT YOUR OWN RISK AND OWN FAULT IF SOMETHING GOES WRONG!
Tested with the firmwares XXJF5 (JFB) and XXJG5.
The AUJF2 or XXLF3 should run, firmware upgrade with at least ODIN JF5/JFB is strongly recommended!
Let's go with the simpler version:
1. update.zip copy from the notes on the internal SD card (/ sdcard) of the Galaxy S (connect as mass storage via USB to the PC and copy the root directory without subfolders)
2. the Galaxy S off completely
3. Press the "Volume Up" (NOT down) and Home-/OK-Tasten and hold press Einschalteknopf; volume button and let go home only if the debug menu appears on the screen
4. Select update.zip (volume down), then confirm Home Button: S on the Galaxy apply.
No matter how you do it: after the reboot of the Galaxy S is the Rooting ready!
http://img593.imageshack.us/i/19495519984291003396410.jpg/ ????
it's normal to get those fuzzy screen when you boot up your SGS while using ultibread ROM...and you need to be patient until the SGS boot animation appear on your screen...the v1.4 is weirder, you get some robot voice when switching on your SGS...just flash other firmware if you got any problem with any ROM....
I have been waiting about 30 minutes and it's still the same picture as ..
oggy059 said:
it's normal to get those fuzzy screen when you boot up your SGS while using ultibread ROM...and you need to be patient until the SGS boot animation appear on your screen...the v1.4 is weirder, you get some robot voice when switching on your SGS...just flash other firmware if you got any problem with any ROM....
Click to expand...
Click to collapse
The robot voice is voodoo lagfix ,isnt problem. Dont interupt the procedure or youll corrupt your data
Sent from my GT-I9000 using XDA Premium App
What can I do now?
I can not even more into the recovery mode ... : /
man u should really read some more topics before you start flashing and ****ing up your phone : /
but here some help :
Download this:
http://forum.xda-developers.com/showthread.php?t=985565
And follow the guide from BogdanSNB !
I've extracted the data now move to mobile?
and i can not copy on sdcard...
thx for help -.-
i can not copy zip on my sdc
Adb push?
Sent from my GT-I9000 using XDA Premium App
Hello there,
In an attempt to get Gingerbread to a Verizon Tab, i failed. Not a total noob here. Just need some direction. Thanks in advance.
1)Got a Verizon Galaxy Tab. Rooted (Z4Root) All good there. Went ahead and installed Clockworkmod Bootstrapper (paid) from Market.
2) Clicked Boostrap Recovery. All good. Then clicked Reboot Recovery.
3) Sytem did its thing installed, all good. Then (in recovery mode) I hit Reboot Device.
4) Fail. Stuck in Samsung screen. Cannot get into recovery mode by button combination. No blinking lights. Just samsung (word) and black screen.
5) What now? Any ideas? Help!
Same thing here. Except I went to reboot into recovery manually and now it's a yellow triangle says downloading do not turn off target?? So I'm a let it do its thing and see where this goes. Any advice is good advice thanks.
Sent from my DROIDX using XDA App
questfreelance said:
Hello there,
In an attempt to get Gingerbread to a Verizon Tab, i failed. Not a total noob here. Just need some direction. Thanks in advance.
1)Got a Verizon Galaxy Tab. Rooted (Z4Root) All good there. Went ahead and installed Clockworkmod Bootstrapper (paid) from Market.
2) Clicked Boostrap Recovery. All good. Then clicked Reboot Recovery.
3) Sytem did its thing installed, all good. Then (in recovery mode) I hit Reboot Device.
4) Fail. Stuck in Samsung screen. Cannot get into recovery mode by button combination. No blinking lights. Just samsung (word) and black screen.
5) What now? Any ideas? Help!
Click to expand...
Click to collapse
Try turning it off, and then going back into recovery. On my Sprint tab it usually fails to convert on the first try. If that doesn't do it, do a full wipe, and then reboot recovery.
coheirnt: I had the same thing happen a couple days ago, you just need to reflash your firmware with Odin or Heimdall. Do you have Sprint or Verizon? On Sprint you can just use the firmware from that flasher leak thread, but I don't know if there's an official firmware dump for Vz yet.
It's Verizon. I'll look around see what I can find. Hmmmm
Sent from my DROIDX using XDA App
Ha found em.. trying to learn heimdall and start my process wish me luck lol
Sent from my DROIDX using XDA App
Pwr & Vol Minus = Download Mode
Pwr & Vol Plus = Recovery
Would you mind linking to the firmware? I need the modem file for something.
Heimdall is easy peasy, just plug in your tab while in download mode (power and downvolume), install the drivers with the included zdiag app, and run the heimdall gui.
Sent from my SPH-P100 using XDA Premium App
it wont let me post the link but pm me and ill share.
this is how i got it back to normal. this has been so much fun hahahaha.. i dont think the modem is in here??
hey guys i know this thread is long and dead but i just picked one of these up and landed in the same exact situation anyone want to hook me up with a link to get the software to get this thing back up and running ? thank you !
I just got this tab and like every other android i get I rooted it. I used superoneclick -- worked fine. then downloaded cwm and flashed the recovery. of course when i went into recovery it was 3e so i couldnt actually use cwr without the bypass fix. Anyway -- i used some recovery fix -- which i think was for a vibrant -- wasn't thinking. Once it rebooted into recovery it showed some yellow letters then went blank. The computer still recognizes it but the tab won't boot. i can reset it by turning it off and on but it only shows tmobile splash and the yellow letters scrolling in recovery then goes blank again. please help. i've been reading everything but no one seems to have had this problem.
thank you very much
Put it in a blender, jk, send it back to samsung.
Sent from my SGH-T849 using XDA App
atomiq said:
Put it in a blender, jk, send it back to samsung.
Sent from my SGH-T849 using XDA App
Click to expand...
Click to collapse
is that really my best option??
i figured there would be some manual way to reflash the recovery or maybe complete firmware with a recovery built in. it will still go into download mode -- like i said the computer still recognizes it but I just don't know where to start. ive never used odin and not a pro at adb/sdk but i can usually follow directions pretty well. i've rooted g1's, mytouch 3g fenders slides, inspires, atrix, vibrant, captivates so i'm not giving up yet. i know someone is willing to help.
from the off position, when you press and hold volume down then a moment later without letting up from volume down also hold power button until lights turn on, what does it do?
download all below zips, and unzip them
run it usb driver. say yes to everything. plug in tab to computer in download mode. let it install tab drivers
unplug tab.
open odin
Watch the first box on the left. ID:COM
plug in tab to comp in download mode.
That box should light up yellow, that means your tab in connected and ready to go.
place unzipped stock rom in PDA.
Press Start.
When done it should say all threads completed, and your tab should restart on its own.
Let it boot, and welcome back to stock Tmobile
uploads are taking a bit, be patient.
Do you want stock 2.2, or 2.3?
yes -- it goes into download mode
sounds promising -- thank you -- i will keep you updated on the progress.
prefer 2.2 where it was.
thanks so much
REMOVED!!!!!
here is dropbox of everything you need. It is a stock firmware, no root.
once we get you back up and running, we will go from there.
please let me know the moment you have downloaded this zip, as it sucks my bandwidth.
Drop box removed. Avaiable upon request
Sent from my GT-P1000 using XDA Premium App
so? i would like to request the download then...
the files being removed?
gottarootit said:
so? i would like to request the download then...
the files being removed?
Click to expand...
Click to collapse
i will put it up again for an hour. Gimmie a second, gonna add stock tmobile 2.2 also
here ya go, JMK is stock Gingerbread, And the other is 2.2. If you are going to 2.2, you dont need to worry about any of the modems in the zip folders.
just open odin and and place stock tar file
REMOVED!!!!!!
ssserpentine said:
here ya go, JMK is stock Gingerbread, And the other is 2.2. If you are going to 2.2, you dont need to worry about any of the modems in the zip folders.
just open odin and and place stock tar file
REMOVED!!!!!!
Click to expand...
Click to collapse
beautiful --- just flashed with odin and went through with no problems. once back up i re-ran the root and unlock. now i'm gonna wait to flash cwr until i'm good and sure i know what i'm doing. btw -- i flashed a new kernel with recovery before the full restore and that didn't help. i'm not positive but i guess thats how you get clockwork rec to work.?
thanks so much.
can someone help me with the same issue. I am getting no boot on this tablet. I have tried the volume button and power with no luck. Can someone send me a link for the stock sprint restore.
gottarootit said:
beautiful --- just flashed with odin and went through with no problems. once back up i re-ran the root and unlock. now i'm gonna wait to flash cwr until i'm good and sure i know what i'm doing. btw -- i flashed a new kernel with recovery before the full restore and that didn't help. i'm not positive but i guess thats how you get clockwork rec to work.?
thanks so much.
Click to expand...
Click to collapse
Which did you go with? 2.2 or 2.3.3?
Let me know what your tab currently says in settings, about device.
Hold down the back arrow, and while still holding a second later, press you powerbutton. Let go.
Shoulda taken a screen shot. Uoload it here or just write it down.
I can guide you from there.
"42"
mnbgibbs said:
can someone help me with the same issue. I am getting no boot on this tablet. I have tried the volume button and power with no luck. Can someone send me a link for the stock sprint restore.
Click to expand...
Click to collapse
get the samsung usb drivers. Included in keis, but google and download just usb driver if you dont have kies.
Instal.
Plug in tab.
Let drivers instal.
Download and open Odin.
There is.a box on the left below an open window, is it blank? (no yellow color?)
If so, your okay so far. If not and it has a yellow, still good.
Plug in tab to comp.
Did a yellow box appear? Or a second one if ine allready there?
hi, i bricked my t849 by wrong flashing..still can go to download mode.can you upload file again to recover my PDA
sharaz191 said:
hi, i bricked my t849 by wrong flashing..still can go to download mode.can you upload file again to recover my PDA
Click to expand...
Click to collapse
i posted the link for ya there .. check it
after update stuck at galaxy tab logo...any other help sir
ok download stock rom froyo and not Gingerbread
where can i find froyo version?
i'm not an english expert, but i'll try to explain you what happened, and i hope you can help me.
i have a samsung galaxy tab gt - p1000, with an old version of android, 2.3.3, because it's one of the devices wich haven't got the update. but i have bought it about 5 months ago, so i didn't want to waste it. so i decided to put in it the new android version ice cream sandwich, 4.0. and i followed theese instructions:
Requirements and Reminders
To be able to flash the MIUI 4 Alpha ROM on your Samsung Galaxy Tab P1000, you need to satisfy the following requirements:
Root your Samsung Galaxy Tab 7″ and install ClockworkMod Recovery on it.
Fully charge your tablet’s battery.
Back up all important files and data on your device ( i.e. bookmarks, contacts, SMS, APNs, etc.).
Download the MIUI 4 Alpha ROM for the Galaxy Tab from here and save the file to your computer.
The procedure has been tested to work on the Galaxy Tab GT-P1000. It may or may not work on other models.
Use the instructions at your own risk. We shall not be held responsible for any damage to your phone if you follow these instructions.
Installation
Here’s how to install MIUI 4 ICS on your Galaxy Tab 7″:
Connect your tablet to your PC.
Copy the MIUI 4 ROM to your device’s internal storage.
Disconnect your tablet from the PC.
Turn off your tablet.
Reboot the Galaxy Tab into ClockworkMod Recovery by holding down the Volume Up key and the Power button simultaneously.
Once the device has booted into ClockworkMod Recovery, create a backup of your currently working ROM. You can do this from thestyle=”font-style: italic;”>Backup and Restore > Backupmenu. This backup will come in handy in case you want to revert to the original ROM of your device.
From the recovery menu, select “Wipe data/ factory reset” and confirm that you want to perform the action.
Select “Wipe Cache partition” and confirm that you want to perform the action.
Select “Advanced”, then “Wipe Dalvik cache” and confirm that you want to perform the action.
With your phone data completely wiped, you may now install the MIUI 4 ROM. From the recovery menu, select “Install zip from SD card”.
Select “Choose zip from SD card” and choose the ROM file that you have copied to your tablet earlier.
Confirm the installation by choosing “Yes”. The ROM will be flashed after confirmation.
Reboot your device.
Congratulations! You now have Ice Cream Sandwich (via MIUI 4 Alpha) on your Galaxy Tab P1000.
but at point 8 or 9, (i don't remember, but i think it isn't too much important) i had to stop, because i stucked. so i reboot the device, and i've formatted it. the device worked like always, and so i decided to download rom manager from the market. when i launched the application i saw that i could flash the system that i had put in the device directly from there. so i touched that option and i followed the first instructions. i flash the system as the rom mangaer app told me. but when the device reboot for installing, and doing it's thing (i'm not a computer and technology expert to D: ) it stopped at the first screen, ( the one that says "galaxy tab, samsung"), and it didn't go ahead. so i reboot in recovery mode switching off the device and rebooting it pulling the volume up button + the power button, but it doesn't worked. so i tried to reboot it pulling volum down button + power button and appeared a yellow triangle with the android man and the written: downloading do not turn off target
but it stucked there like the first screen. i waited that the device discharged, and i charged it another time, but when i charge it, it appear on the screen the battery icon, but it is blocked. and now i can't open it, and it doesn't work or answer at all.
i know that it's possible that i made mistakes following the instructions, or the instructions doesn't worked.... but now, how can i reboot or format my device.
i only need to reuse, the information or the documents in it are not important.
if you can, help me, thanks
Read my post here. Should be same way.
http://forum.xda-developers.com/showthread.php?t=1626825
You can stop right after flashing gb-stock-safe-v5
But you would probably want to go all the way and try overcome from.
Sent from my GT-P1000 using XDA
If you are getting the download screen then flash it with stock firmware.You can download from samfirmware.com for gt P1000, Android 2.3.6 is available. Just use Odin and flash. You can get a working tab.
Sent from my GT-P1000 using xda premium
Hey guy, I can't give you all links now...but I will help you! I think I can
Excuse my spelling too, I am Russian and English is not my native language.
Watch the team overcome.net website for restock bundle and overcome kernel.
There are some modems,from,Odin in the bundle. I am not very good in English,please read some instructions on flashing roms by Odin, I can't fully explain...
You just connect your tab to Odin via download mode and flash restock. And then you flash kernel. OK, you have a clean 2.3 rom, but I really want you to go to CyanogenMod download center and download the latest nightly build. (OK, I don't know how to access it I just go to Devices page, choose any phone, select NIGHTLY BUILDS link and search for p1 in the list and download the nightly and flash it.
Something you can find or can't.
After flashing kernel for restock go to recovery and do wipe user data/factory reset and wipe cache. The system will startup then. Without this you'll get an infinite boot.
The overcome kernel will convert your file system. Please wait for it when your tab is charged and is booting. A robogirl will talk to you then
After flashing CM wipe it too!
Download GApps on goo.im to have Market and other Google apps! (Flashing via recovery)
I think that is all. If you have problems,send me a message, I'll try to help! Good luck!
you have to return to stable xxjq1 gingerbread. you have a soft brick. follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=1133590
then flash chainfire's cwm
after that, follow this thread:
http://forum.xda-developers.com/showthread.php?t=1523174
Please thank me if you found it useful
ok, but i can't download the right firmware from sammobile.com
can someone explain me how to download the right firmware from the site, and how to choose the correct one? thanks
Go to www.samfirmware.com and select the firmware you want to download.
Sent from my GT-P1000 using xda premium
You have indeed sofbricked your tab.
Google for "Overcome guide for galaxy tab 7" (can't post any links yet)
There you can find a direct link for the file "GB-stock-safe_v5.zip".
This contains the needed firmware and Odin tool to flash it.
Follow the soft brick guide given by gogol1996 with the content of the zipfile and you're back in business.
B.V. said:
You have indeed sofbricked your tab.
Google for "Overcome guide for galaxy tab 7" (can't post any links yet)
There you can find a direct link for the file "GB-stock-safe_v5.zip".
This contains the needed firmware and Odin tool to flash it.
Follow the soft brick guide given by gogol1996 with the content of the zipfile and you're back in business.
Click to expand...
Click to collapse
No such thing as a "soft brick". It just a term that newbies like to throw about for any occasion they haven't flashed device correctly and dont know how to use download mode or recovery to get their OS back up and running.
Your device is either "bricked" or it isnt. If you can use download or recovery, it isnt.
Here we go again.
What about if you can get to download mode but the internal flash is stuffed?
A few guys here got that. Not a brick?
Sent from my GT-P1000 using XDA
priyana said:
Here we go again.
What about if you can get to download mode but the internal flash is stuffed?
A few guys here got that. Not a brick?
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Ok sorry, edited. If you can "use" download/recovery its not bricked.
99.9% of times the term "soft brick" is used though its simply that the user doesn't know how to use download mode and they have screwed up rom flash/kernel, get no boot or just boot loop etc and cant use recovery.
I like your original definition else where that says it is not bricked as long as you can flash it.
But that is obvious.
Sent from my GT-P1000 using XDA
Thanks to all of you, i have fixed my device. now it goes in recovery mode and in downloading mode. i guess i have only to put a new version of android on it and i'm cool
Depending on your luck.
Some people can go to download mode but flash keep failing due to damaged internal SD.
You can read about here somewhere.
Good luck.
Sent from my GT-P1000 using XDA
priyana said:
Depending on your luck.
Some people can go to download mode but flash keep failing due to damaged internal SD.
You can read about here somewhere.
Good luck.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
That usually only happens though when you are flashing via USB and you lose power or pull cable early etc, ie pull handbrake when flooring it
so there is a possible brick even if you have download/recovery mode.. another new thing I learn daily.
slyv3 said:
so there is a possible brick even if you have download/recovery mode.. another new thing I learn daily.
Click to expand...
Click to collapse
to hard brick your tab, ie to make it useles, you have to delete the bootloader files (boot.bin & sbl.bin) from the .tar package before flashing
hard brick sure for me i need some help
i try to flash the stock rom N7000 on my galaxy tab and i forget to read the post that prevent not to do that i now mt tab have a black screen it's an hard brick no respons with odin so how can i do to pass the probleme of the boot loop or boot trap help me. thk
bring it to a shop for JTAG.
Or maybe you can try the Unbrickable Mod
http://forum.xda-developers.com/showthread.php?t=1312391
not sure if that can help.
And by saying your "galaxy tab" you mean you have a P1000, right?
slyv3 said:
so there is a possible brick even if you have download/recovery mode.. another new thing I learn daily.
Click to expand...
Click to collapse
reinstall driver kies.. plug your usb cable.. open odin.. flash.. and you're done!
Hi,
I have Samsung Galaxy S I9000 running Ginger Bread.
I wanted to upgrade my phone to Ice Cream Sandwitch or Jelly Beans. In order to do it, I started with below steps to root my mobile.
1. Installed latest Clockwise Mode application into my phone.
2. Installed Odin3 v1.7 in my laptop.
3. Downloaded CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1.tar on my laptop.
4. Started Odin first.
5. Disconnected mobile and started in download mode with Volume Down + Home Button + Power Key.
5. After starting the download mode, connected mobile to laptop using the USB.
6. Keep all the default values in Odin3 i.e. Re-Partition option unchecked, Auto Reboot and F-Reset Time option enabled. Selected tar file CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1.tar in PDA option.
7. Connected mobile and it detected ID Comm [Highlighted in Yellow].
8. Finally click on Start button.
After starting the process was completed and Yellow color changed to Green one, phone was auto reboot.
But after reboot it is just stuck on start of screen and not going ahead. I wait for 2 hours but still not working.
Could you please help me how I can solve this issue now?
Did you try to pull battery out and restart the phone again?
Do you still can go in CWM with 3 button combo again?
If yes then try to flash a ICS or JB kernel (depending on what ROM you finally want to have on your phone) via CWM and then go in advanced and restart recovery (if available), otherwise just try to flash the rom.zip on top.
If CWM is not possible, the go in download mode an falsh a tar version of kernel via ODIN.
Here are different semaphore kernels for each android version:
http://78.46.194.137/downloads/gt-i9000-ics
http://www.semaphore.gr/downloads/gt-i9000-jb
For ics it should work after 1. flash, but for JB you have to flash it 2 or even 3 times, if after restart phone does not boot. Then battery out again, start in recovery and flash zip again.
Good luck and good success .
I think, at this position, installing a new gingerbread stock ROM will be preferable. Try installing XXJVU. Then root with cwm and install any slim bean version in case you are interested to use jelly bean.
Sent from my GT-I9000 using xda app-developers app
Sure that will be the best way....but my suggestions do not take much time, so why not give them a try .
But if its not going, then a restock is the best you are right:
What I always do for restock is using slappys rescue kit.
Unzip it and flash the Rom via Odin. There is everything, also a txt file with a guide included.
http://forum.xda-developers.com/showpost.php?p=29114573&postcount=2
If you want to have slim rom then its recommended to flash CM9 first or flash a modem afterwards via cvm, because slim does not have a modem included.
And/Or just follow the installation guides/recommendations from the single ROM Threads.
Thanks Guys for your help.
My issue is resolved with below post.
http://forum.xda-developers.com/showthread.php?t=1809098
phone not starting
guys i cant start my phone....even the three buttons ar not working...it is just loading and loading....help please
model-gt-s5830i
viral1999 said:
guys i cant start my phone....even the three buttons ar not working...it is just loading and loading....help please
model-gt-s5830i
Click to expand...
Click to collapse
You are here in totally wrong section: this is a i9000 help thread section. Hopefully you didn't flash a i9000 rom, otherwise your phone is hard bricked.
tetakpatalked from Nexus 7 flo
Me 2: It was from low battery in my case
I had similar problem when rooting my Samsung Galaxy S5 smartphone with Odin3. After rooting with a success message my phone was showing just the Samsung Logo each time I was trying to turn it on without loading OS. I googled and directed here and connected my phone to the charger as its mentioned in a link you provided which solved your problem. It turned on automatically after a few minutes while of charging and when turned on it was charged approximately 40%.
As I was very afraid my phone got serious harm at first I hope this maybe a sedative probability for duds really worry about what happened to their smartphone.
I rooted my phone le tv without pc bt after rooting it is not starting pls help me how to start my mobile again
Imbhavya said:
I rooted my phone le tv without pc bt after rooting it is not starting pls help me how to start my mobile again
Click to expand...
Click to collapse
What exactly did you do, which phone model and what does it display now?
Sent from my A0001 using Tapatalk