If i use the Glitch-Kernel V14 and oncosmic's ICS port on my I9000 i can't connect as USB-MassStorage. Only USB-debugging is shown in notification-bar.
I flashed back to FuguMod-kernel and everything works fine.
Whats wrong?
I thought ICS doesn't support mass storage mode?
snapper.fishes said:
I thought ICS doesn't support mass storage mode?
Click to expand...
Click to collapse
with fugomod-kernel it works.
from where i can download Glitch-Kernel?
first of all glitch kernel is not for onecosmics ics.its primarily for teamhacksung cm9 only.so please stop using that.u won't get any support from that thread.and mass storage can be accessed via cwm I believe.its there on the glitch kernel thread.nothing's wrong hence.
Related
Hey guys, sorry for being a giant noob...
I am currently using an I9000t (telstra australia model) on Darky's 9.5
My computer is unable to detect (not even a notification/ping noise) when I plug a USB between it and the galaxy S.
I have tried the following:
Application -> USB Debug mode
Wireless connections etc -> USB Settings -> Mass storage/ask on connection
Changing USB Ports
Changing USB Cables (this is the one I used to flash from 2.1 to Darky's 9.5, so it should be ok)
Taking out Ext SD Card
Install samsung's driver on the PC
But sadly the issue still presists (note that the phone does not have the notification or symbol that the USB is plugged, however, it is charging)
There is a giant noob mistake did when flashing tho! I flashed 2.1 to Darky's 9.2 (without downloading the configurations app on the market), then installed the config app, flashed to 9.5 but forgot to turn off the speed and lag mods! I then went to recovery mode, turned off both mods, and reflashed 9.5 - then went to recovery and turned them on again. Could this have messed up the USB? If so, is there a way for me to have a clean slate and reflash again? (note that, I only have the resurrection 9.2 and 9.5 Extreme zip files... I was an idiot for not having a backup zip file...)
I have posted this message on the Darky forum but was referred to here, this also includes some of the steps recommended to me there.
darkyrom.com/community/index.php?threads/usb-connection-not-detected-by-computer.2353
Thanks in advanced
what kernel do you have mate?
try flash this on CWM
http://db.tt/xUlV2qo
Sent from my GT-I9000
i have Dark Core 1.4, would flashing this in conjunction with what I have cause issues?
Personal recommend would be to eliminate a bad rom and flash stock rom via Odin with pit 512 and repartition checked .
jje
try that file... its contain mount fix for sd ~ro to ~rw...it works for me...
if that cant solve you issue.. then flash back your rom via odin
recommended switch your kernel ro speedmod k13E then apply that file...
dont forget to disable lagfix first for safety works
hmm or you can try that file first for Dark Core..
Sent from my GT-I9000
Sad part is... I tried Odin with my cellphone in download mode - the computer does not detect it at all...
doesthisusernamework? said:
Sad part is... I tried Odin with my cellphone in download mode - the computer does not detect it at all...
Click to expand...
Click to collapse
ok maybe this the way out for debugging conect
1. Use that the file i uploaded before and try the fix for mounting..
just flash like usually on CWM its safe..
Recomended for you :
* Change your kernel to Speedmod K13E and apply that fix everything on Cwm recovery like usually to
That cause is your kernel not match for mounting sd card and phone mounting so it willnot discoverable by your computer
aware a lagfix of you change kernel
.. disable it first
Sent from my GT-I9000
check to see if your phone shows up in device manager when it's plugged in.
Sadly nothing shows up in device manager.. (sorry for the late reply)!
I will try the fix above later if that's ok... I do not know how to flash to speedmod so I'm scared it'll brick my phone... (without Odin, I cannot unbrick it)
I successfully flashed the new ics port for the captivate upgrading from cyanogenmod 7.1...but I didnt like it as much as CyanMod so I went to back up the rom and somehow I'm STUCk at the ATT boot screen without download mode or recovery mode...nothing works no adb no red screen of death...I tried making a jig...MY QUESTION....is there any native linux support apps or anything that can help me...I can't solder for crap?!!
You have to reflash cm7 twice and reflash gapps once
Sent from my captivate with ice cream sandwich...yum
motiv8d365 said:
I successfully flashed the new ics port for the captivate upgrading from cyanogenmod 7.1...but I didnt like it as much as CyanMod so I went to back up the rom and somehow I'm STUCk at the ATT boot screen without download mode or recovery mode...nothing works no adb no red screen of death...I tried making a jig...MY QUESTION....is there any native linux support apps or anything that can help me...I can't solder for crap?!!
Click to expand...
Click to collapse
Wait so you didn't even try to flash CM7 and this happened?
Sent from my (CM9) ICS i897 Captivate
3-button????
I already had the Rom flashed but I tried to rom back to CGM and now theres nothing to get me out...im in limbo...at least if I was bricked Id have an idea of where to start...does the ics build include the 3-button fix???
motiv8d365 said:
I already had the Rom flashed but I tried to rom back to CGM and now theres nothing to get me out...im in limbo...at least if I was bricked Id have an idea of where to start...does the ics build include the 3-button fix???
Click to expand...
Click to collapse
Your original post made me think you hadn't even tried to flash cm. Yes the three buttons are supposed to work. If you try everything to get into download/recovery but can't, you will need a jig
Sent from my (CM9) ICS i897 Captivate
motiv8d365 said:
I can't solder for crap?!!
Click to expand...
Click to collapse
You don't need to solder the jig for it to work. Just twist the resistors together in a string and touch the ends to the pins of a cut-open usb connector. Make sure you hold it together with tape before you try it, you can't touch any of the bare wires or it changes the resistance.
Victory!!!
It worked....I've watched tons of videos of it working and tried a ton but it worked...flashed back to 2.1...on odin-one click does master clear work on mtp mode thats what my phone starts in?
motiv8d365 said:
It worked....I've watched tons of videos of it working and tried a ton but it worked...flashed back to 2.1...on odin-one click does master clear work on mtp mode thats what my phone starts in?
Click to expand...
Click to collapse
sorry looked it up change to mass storage enable debug
hi guys i just got my optimus black rooted and i have the cm7 7.2.0 rc1 rom... i have an issue when trying to start usb mode my computer doesnt recognize my phone when turning on usb mode... i have tried other roms and i dont have this problem only with cm7....any possible solutions??
Am I the only one who never used camera mode (PTP)? That's what I thought. Here's a modified boot image for the leaked P3113 stock JB rom that makes the device use USB mass storage mode when it's supposed to be set to camera mode (this means, to use UMS, set your tab's USB to camera mode). It's also insecure, /system is mounted RW, and UMS is set as default instead of MTP.
Flash in CWM. I do not know if this is compatible with P3110 or P3100.
im going to give it a try. dunno why nobody gave you feedback. i have never used PTP on any of my devices either.
Edit: did not work for me. Got stuck before samsung animation. Im fully stock 4.1.1.
el_venga said:
im going to give it a try. dunno why nobody gave you feedback. i have never used PTP on any of my devices either.
Edit: did not work for me. Got stuck before samsung animation. Im fully stock 4.1.1.
Click to expand...
Click to collapse
May be incompatible. This is for the leak. You on leak or official jb based ROM?
Hey guys, since i flashed CM10 and/or V30I KU5900 i have some problems with USB Debugging, i cannot use QtADB, or flash the CWM for example .
All drivers are installed but it just doesn't show up D:
Any suggestions?
Thanks for your Help .
In cm10 change your mode from MTP to camera. So just pull down the topbar, find the USB option there, while plugged to USB, open it, change it to Camera, unplug USB, plug in again and that's it.
For KU5900 repack, I cant tell you, but it should work similar. Dont forget to enable usb debugging in settings
N00BY0815 said:
In cm10 change your mode from MTP to camera. So just pull down the topbar, find the USB option there, while plugged to USB, open it, change it to Camera, unplug USB, plug in again and that's it.
For KU5900 repack, I cant tell you, but it should work similar. Dont forget to enable usb debugging in settings
Click to expand...
Click to collapse
Well, it looks like it's working as USB Transfer on CM10 with CWM Flash but QtADB doesn't seen to work
I can't download the newest version of QtADB, i don't know why, it just doesn't connect, so i'm using the 0.7.3 version .
If you can mirror it i'd be glad
Nikitozin said:
Well, it looks like it's working as USB Transfer on CM10 with CWM Flash but QtADB doesn't seen to work
I can't download the newest version of QtADB, i don't know why, it just doesn't connect, so i'm using the 0.7.3 version .
If you can mirror it i'd be glad
Click to expand...
Click to collapse
Sorry, I am on Linux now, when working with Android... So I only use the "real adb"
N00BY0815 said:
Sorry, I am on Linux now, when working with Android... So I only use the "real adb"
Click to expand...
Click to collapse
Okay XD
Thanks for the help once more : )
Added a mirror for you above
hey this is my first post so correct me if i do many mistake
i have rooted my phone LGp970 very first time...
now i have flashed the korean LG-KU5900 ICS V30I...
and now i can't use my menu,home,back,and search keys...
i can only use them if i put my cell to charge...
any solution for that..
or i m the only one having this problem???
i have read all the topics related to rooting,flashing,unbricking,etc before rooting my phone....
still i can be wrong.....but su is there after rooting...
btw i flashed using "ROM Manager" (i guess only method available for noobs like me)
i had wiped dalvik data(or cache idk) and wiped data also...and done nandroid backup saperately......
one mere thing while backing up some file named sd xlm(or idk) skipped....should i bother about it
.
.
.
.
.
.help me every possible way.....please
cause i can't access my sd as sd in korean ICS V30I because it shows it as internal storage....and i have only one phone so quick reply would be appriciated.....
an sorry for bad english....
rony3964 said:
i have rooted my phone LGp970 very first time...
now i have flashed the korean LG-KU5900 ICS V30I...
and now i can't use my menu,home,back,and search keys...
i can only use them if i put my cell to charge...
any solution for that..
or i m the only one having this problem???
i have read all the topics related to rooting,flashing,unbricking,etc before rooting my phone....
still i can be wrong.....but su is there after rooting...
btw i flashed using "ROM Manager" (i guess only method available for noobs like me)
i had wiped dalvik data(or cache idk) and wiped data also...and done nandroid backup saperately......
one mere thing while backing up some file named sd xlm(or idk) skipped....should i bother about it
.
.
.
.
.
.help me every possible way.....please
cause i can't access my sd as sd in korean ICS V30I because it shows it as internal storage....and i have only one phone so quick reply would be appriciated.....
an sorry for bad english....
Click to expand...
Click to collapse
first of all, try rebooting into recovery(cwm)
if you can't, download an app called quickboot or titanium backup
from your pc, download the sd card fix from the thread
with that, reboot into recovery
wipe data, cache, dalvik
then re-install the rom
afterwards install the sdcard fix
theaks30 said:
first of all, try rebooting into recovery(cwm)
if you can't, download an app called quickboot or titanium backup
from your pc, download the sd card fix from the thread
with that, reboot into recovery
wipe data, cache, dalvik
then re-install the rom
afterwards install the sdcard fix
Click to expand...
Click to collapse
it will fix my menu key,home key problem also right???