Hello.
I wanted to flash the new KL7 and I did the normal procedure with CWM. I had a KL3 stock (no custom kernel) and a KJ4 before.
After the procedure the Note started to boot continuously in loop. After that I tried to flash again with Odin in download mode but the phone is goin' on again in loop after reboot.
I tried then this procedure as in http://bit.ly/sKDXde but nothing again. Always in loop. I am not a developer and I am starting to worry a lot.
Is there anybody here able to help me?
Thanks to all.
Did you try to do a factory reset in the recovery (VolUp+Home+Power) ?
It solved my bootloop issue when I moved from KL3 to KL7!
well man. I tried and it did not work. Now after your msg I tried again and at the third attempt it worked again...I don't know what to say...never had these problems with windows mobile 6 (even if it sucks now compared to the new OS) and I flashed a LOT!
Thanks anyway.
Related
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Is your phone rooted? Do you have cwm?
Sent from my GT-I9000 using xda app-developers app
Freszone said:
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Click to expand...
Click to collapse
Hmm... Which firmware u flashed?
If my post helped, don't mind hitting THANKS
you have to flash a the JVU. are you sur you didn't flash the JW4 !!
Freszone said:
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Click to expand...
Click to collapse
Firstly I don't think its bricked if you can access download and recovery mode ....
I recently did the following to fix everything wrong with my phone.
I flashed to a stock rom (gingerbread 2.3.3)using Odin, then rooted my phone again. Then I flashed darky's rom (GB 2.3.6). After that i flashed tiramislim 9 (ICS 4.0.4) & that worked out for me. Hope i helped.
Hi everyone, I´ve read all of the posts relating to stuck at boot, but there´s no problem like the one I´m having.
First I installed a safe firmware so I can then install Live Note ROM, everything worked fine but after a day of use it restarted for no reason and got stuck at boot like if it was a bad flash. Then I thought maybe it was the ROM, so I installed another one, this time SuperBean v1.3.1 XXLT4 and again everything worked fine until after two days it froze and restarted and now I´m stuck at boot again, I know that I can flash again and it will work, but this should not happen. Just to clarify it doesn´t loop in boot it´s tuck at the Yellow triangle and won´t do anything after that, I can get into recovery and do all things before boot, but it doesn´t start the ROM installed in the memory ever again.
I´ve been flashing since HTC Magic and I have a Nexus 4 with a custom ROM without any problems like this, would anyone know whats going on, or someone have a similar problem?
did you do a thorough wipe before installing the new rom?
nokiamodeln91 said:
did you do a thorough wipe before installing the new rom?
Click to expand...
Click to collapse
Yes I followed all the instructions, the thing is that everything works fine for a day or two and then after a random restart it won´t boot again, this problem did not happen after a flash.
try flasing a stock JB rom.. make sure you format system, data cache & preload .. then boot inot download mode and flash stock jb rom. any region rom should do.
Hey!
I've flashed kernel and firmware on my Note successfully several times, but now I encountered a problem:
I'm on Asylum_CM10.1_20130311_n7000 ROM and was using Asylum_CM10.1_20130311_n7000 kernel, all working fine.
Then I flashed a new kernel, HydraCoreNirvana Kernel for Galaxy Note GT-N7000. After this I've been in hell, every time I try to start/boot the phone, it jams on the Asylum startup animation. I tried both from the SD and when the phone wouldn't start, via Odin. Then I tried flashing back to the working kernel above, no help. Now I'm stuck with two non-working kernels and a useless phone. I hope I haven't ruined it already...
I was flashing with the instructions @ rootgalaxynote. com
Any help would be greatly appreciated!
-Larson
larson80 said:
Hey!
I've flashed kernel and firmware on my Note successfully several times, but now I encountered a problem:
I'm on Asylum_CM10.1_20130311_n7000 ROM and was using Asylum_CM10.1_20130311_n7000 kernel, all working fine.
Then I flashed a new kernel, HydraCoreNirvana Kernel for Galaxy Note GT-N7000. After this I've been in hell, every time I try to start/boot the phone, it jams on the Asylum startup animation. I tried both from the SD and when the phone wouldn't start, via Odin. Then I tried flashing back to the working kernel above, no help. Now I'm stuck with two non-working kernels and a useless phone. I hope I haven't ruined it already...
I was flashing with the instructions @ rootgalaxynote. com
Any help would be greatly appreciated!
-Larson
Click to expand...
Click to collapse
Please, I'm drunk and freaking out with this phone (I know 1st world problems).
Do a wipe data in recovery (if u can go to) or ODIN. Then try to see if the phone boots, if it doesn't you can do a clean install of Asylum ROM again. If nothing works(!) Go back to flash a stock ROM via ODIN and then use Philz kernel to re-root.
Varad297 said:
Do a wipe data in recovery (if u can go to) or ODIN. Then try to see if the phone boots, if it doesn't you can do a clean install of Asylum ROM again. If nothing works(!) Go back to flash a stock ROM via ODIN and then use Philz kernel to re-root.
Click to expand...
Click to collapse
Tried all that (went straight to stock). No help, I guess somethings gone wrong with the boot sequence, I flashed Philz kernel and now it loops on the samsung animation. Before, it sometimes showed "Android is upgrading 1/83 (or something similar), the number would go up a while, then the start-up animation again and all over again from 1/83. It always seems to jam on the ****ing animation... Gonna jump off the roof.
larson80 said:
Tried all that (went straight to stock). No help, I guess somethings gone wrong with the boot sequence, I flashed Philz kernel and now it loops on the samsung animation. Before, it sometimes showed "Android is upgrading 1/83 (or something similar), the number would go up a while, then the start-up animation again and all over again from 1/83. It always seems to jam on the ****ing animation... Gonna jump off the roof.
Click to expand...
Click to collapse
I got the phone working again. Did a factory reset from recovery and after that the phone started up. After that installed the HydraCoreNirvana Kernel again and now it works just fine. Thanks very much for the help!
Hi guys. I was hoping that maybe some of you genius's maybe be able to help me out? I will try and explain my problem as clearly as possible.
I have an I9305 and an from the UK. I have rooted my phone before and used many custom roms. But quite recently I decide to unroot my phone and go back to a normal stock rom. Last week I got the urge
to root again and install some custom roms. I quickly discovered that since I had OTA my phone that the latest OS has problems (knox) with rooting. I did manage to root my phone. However, the problem started when I tried to install
twrp through Goomanager. I tried to reboot into recovery mode and my phone was stuck on the Galaxy S III splash start screen, and I could not get into recovery mode either. I could still get into download mode. Eventually I did manage
to restore my phone using odin, and install a stock rom for Ireland. After this I tried to install a stock from for the UK, and now my phone is now back to being stuck on the splash screen, and I can not enter recover mode on my phone
using the up/home/power combo, but I can still acces download mode and conect to odin. I have been searching on line for several days for some solutions and fixes, but I seem to be getting no where. So please, if you can help my out and hopefully get my phone back to life I would
be extremely grateful.
If you can boot to download mode, then have you tried to flash a custom recovery with odin? If its twrp you want then flash the twrp tar for i9305 which you can get off the team win website and then see if you can access recovery. If you can, then you should be able to flash a samsung 4.3 rom or cm rom from external sd if you don't have one on your internal or even restore a backup if you have one.
AllianceROM I9305
Thanks for your reply. Yes, I have tried to flash cwm and twrp using odin. They seem to flash fine, but I can not enter recover mode at all. I have also tried to flash some custom roms and they also seem to flash fine, with no errors, but my phone is still stuck on the boot logo. Thanks for any more help.
daytimeKnight said:
Thanks for your reply. Yes, I have tried to flash cwm and twrp using odin. They seem to flash fine, but I can not enter recover mode at all. I have also tried to flash some custom roms and they also seem to flash fine, with no errors, but my phone is still stuck on the boot logo. Thanks for any more help.
Click to expand...
Click to collapse
im afraid like me, your stuck on 4.3... download the offical rom and odin it across to your phone, you will not be able to root your phone from now on, your stuck stuck with stock 4.3.. you cant even enter recovery mode thanks to knox.. just the download mode.. like i said in my post "UP YOURS SAMSUNG" IF I EVER SEE YOU IN THE STREET ILL KNOX YOU OUT LOL
relating btuali
Thanks for you replies and help so far. It would be good if I could flash 4.3 through odin, but unfortunately after each successful flash, my phone remains on the sIII logo screen. Maybe there is a specific rom that you guys could recommend that I try? Thanks once again.
Hi there. A big thanks for taking the time to help and give advice. I now finaly have my phone working again. I used Odin 3.7 and the latest official rom, entitled "I9305XXUENA1_I9305SIOENA1_SIO.zip" Odin froze and stalled a few times trying to install but after a few tries it worked. I can now also get back into recovery mode now. So, I was wondering might it be a good idea to do the normal wipes in recovery mode. ie wipe cache, etc. Thanks once again.
Yes keep it clean...
Raistlin1158 said:
Yes keep it clean...
Click to expand...
Click to collapse
Will do.:good:
Boot loop on i9001, I tried everything but I guess not the right thing yet. I had CM11 installed but wanted to downgrade to Stock Rom gingerbread 2.3.6. I couldn't find any guides in that regard so I went on and with ODIN I flashed the phone to the stock rom, now it boots up forever, then I tried a boot loader fix, flashed that too, nothing. Re-flashed other stock roms, nothing.
It's stuck on a loop boot.
Can you please let me know what I could try? :crying:
Ok, try to re flash cm11 by following the same steps you did the first time you flashed it. Then find a guide to downgrade it to gingercake. Let me know.
Loop boot solved i9001
thanks you just gave me the idea of going to recovery mode and wipe all data and partition. After rebooting, 2.3.6 was there waiting for me.
Thanks me