Dear Sirs..
I think one of you have this problem before or at least heard about it..
I installed new roon from this forum to my TYTN II then suddenly i got realise i have problem in the order of the keybored when i press FN nothing is same..
i my previows rom with is same than my new one but its other ver i have no problem .
i try to look around to fix this but no result .. its make me crazy . like this my keyboard is useless and i need it .
i read some one said to make some change in regredit and its good bs i know you can do every things there but i couldnt found the value he was talking about :
HKEY_LOCAL_MACHINE/HARDWARE/DEVICEMAP/KEYBD/CWSLayout
in my system i coulnd find this CWSLayout value like its not exsist ..
what should i do .. ???
Sorry fellows... i just find the the solution and the result
it was all from EzInput 2.1. i disable it and wallla every things back again normal..
So if you face same problem like me just stop this service ..
Great
It was driving my crazy.
F&%&% that software.
Thanx.
Soldar.
"Tilt keyboard fix.cab" can help you
Note : Hi, due to work overload i cannot be active on xda. If you want personal assistance regarding this problem, you can get in touch with me via twitter
www.twitter.com/SiddharthSaiG
Click to expand...
Click to collapse
Before you proceed, please note that I cannot be accountable/liable for any damage caused to your phone. This is only a guide!*
THIS TUTORIAL IS ONLY FOR HTC TOUCH DIAMOND - NOT FOR DIAMOND2 / TOUCH PRO / HD2 ( This is simply because i don't have these devices with me and that i haven't tested! Those who have a spare handset are welcome to send it to me for diagnosis )
Let me get straight to the point. I’ve found out the solution to all the screen blackouts or the famous “microp error”. I’m sure no HTC so called Technical department could solve this.
I’ve been sitting 40Hrs straight with my HTC Diamond. ( The worst part is removing the screw’s and putting them back.)
THE PROBLEM –
1.It’s a hardware problem. Upgrading the microp.dll will not solve anything. ( Microchips gives really wired errors)
2.SYMPTOMS : A dialogue box showing “ Microp version 0 , Upgrade firmware “ (as far as I can remember) , dim or no backlight , no charging indicator , No backlight for physical keys , no touch sense (D button) , soft reset button non responsive..
3.EARLY WARNINGS: (a). If u have dropped your HTC diamond , then there is an 87% chance of this happening. (b.) Exposure to extreme cold/heat. ( if it’s a heat issue then u might need to replace the motherboard.)
THE SOLUTION
I don’t have a cam to record the entire event. But there is a YouTube video of an HTC dissembling. I’ve downloaded the video and put captions in it so that it would be clearer. Video will be uploaded soon.
Diamond de-assembling video - http://bit.ly/bxtcw0 (some Chinese guy , thanks dude)
PROCEDURE
When you remove the back cover , you’ll see
1.The battery
2.Sim card holder
3.Tons of screw’s
Remove all the visible screw’s.Remember , your warranty will get void if you have one!! This tutorial is for ones without warranty. Take a look at this picture :
http://www.twitpic.com/1cymw5
Remove the screw's shown above..
Next Locate the below chip.
www.twitpic.com/1cynw4
This chip is the main cause for the screen problem. This chip wen taken out has 2 connectors beneath it . These connectors wen gone loose causes the screen problem. It will take a few hours to just get them in place. ( HTC need to improve in build design)
www.twitpic.com/1cymhp . ( 2 connectors ) take out all the stickers if you want. Less annoying ..
Press it with your thumb (HARD) to ensure that they are in place. You can hear the click sound if you switch off your “Room” fan. Once this is done , put the battery without replacing the rest of the parts . ( All connections connected ) .. Try to turn it ON. If it doesnt , try again . Again it doesn't turn on then try again. Keep on trying. I'm sure that you'll get it working. IF it does turn on , please post reply's.
NOTE : Make sure that you connected everything back ( Very IMP) . For those who cannot take the chip out , I recommend you to watch a youtube video on how to dissemble an HTC diamond.
ATB
I DON'T ACCEPT DONATIONS . SO AS A "THANK YOU" , YOU CAN FOLLOW ME ON TWITTER
Twitter
RE:
No reply's? nobody tried this out?
I wish to try but with no pics it is hard to guess what chip to search for...
Can you apload some pics to some fileshare or send me on e-mail: [email protected]
thnx a lot
@ above
I've sent you the pics. Check it out..
@ all
Please follow me on twitter to get your replies faster regarding the matter. I have 24x7 access to my twttr account
Thanks a lotttttttttt ~ !!!!
THANX TO TEAM XDA !
I was wondering what went wrong d day wen i rebooted my device.
I was screwed with an error message "microp error please update ur firmware"
googled a lot before ending up with team XDA.
came to know its a software problem, i cleared storage, updated a rom but nothing worked. finally i read xda instructions, i went to d nearest mobile store n explained everything. (since i dont have tools to disassemble my device at home) d service man did d job n i got my htc diamond working !
he just charged 100 rupees, htc service center wud have definitely asked much more than that !
thanks to xda ! but d lesson i learnt is "NEVER DROP/THROW UR HTC"
----------thank you----------
PANKAJ KADEL
kadels.info
@ above
Glad to help you man. This is a really irritating problem.
siddharthsai said:
Glad to help you man. This is a really irritating problem.
Click to expand...
Click to collapse
Hi Siddharthsai,
I have a screen problem but a bit more unique. The touch screen can work for a while if I leave it alone but after using the phone for a while, the screen does not work. If I were walk around with the phone, the screen will not work.
The buttons all can work and the phone can function for programs that can be controlled by the buttons. I am wondering if the problem is the same as yours in terms of connection problem.
Appreciate your advise on this.
Thanks.
CH
@ ja_zzz7
ja_zzz7 said:
Hi Siddharthsai,
I have a screen problem but a bit more unique. The touch screen can work for a while if I leave it alone but after using the phone for a while, the screen does not work. If I were walk around with the phone, the screen will not work.
The buttons all can work and the phone can function for programs that can be controlled by the buttons. I am wondering if the problem is the same as yours in terms of connection problem.
Appreciate your advise on this.
Thanks.
CH
Click to expand...
Click to collapse
Have you tried Hard reset? Hold down the volume key and press the reset key and power button . Backup your data using PIM backup before doing this... let me know if its coming again..waiting for your reply.
I have done the hard reset using the volume down/enter and reset button. I have reached the screen where I have to press on the cross hair and is stuck here as the touch panel is not able to click on the exact spot as it is always clicking to the bottom left. The same thing happened when I tried hard reset using "clear all data and format" but have to wait for a while until the screen can work.
After that the screen problem came back again. Any other suggestions?
Thanks.
@ above
Sorry for the late reply. had some work.
Is you battery low? just turn off your device and charge until its full . this happens mostly when you use duplicate charger . try charging with htc original charger ( borrow it from a frnd ) ...charge it fully and hard reset. Tell me if it works... by the way are you having an Indian version of diamond? ( 2G) ?
Let me know.
RE:
Flash it with a new ROM and if it still persists , then its a hardware prob. do you still have warranty ?
man you are the bomb. many thanks for this tutorial
@ above
Thanx buddy. its not just me , its everyone in XDA ...we all rock
Guess what! My problem is solved. Did a hard reset yesterday but was stuck at the cross hair allignment as the screen was not responding. Left the phone overnight and could complete the allignment the next morning. After rebooting, the touch screen was jammed again.
Try flicking the screen with my finger a few times and managed to move from page to page and after flicking many times, the touch screen recovered and has been OK for the past 10 hours.
Guess one of the solutions for those who have intermittent problem is to flick your screen top and bottom. Guess the pressure must have connected any loose joints. I am a happy guy today )
ja_zzz7 said:
Guess what! My problem is solved. Did a hard reset yesterday but was stuck at the cross hair allignment as the screen was not responding. Left the phone overnight and could complete the allignment the next morning. After rebooting, the touch screen was jammed again.
Try flicking the screen with my finger a few times and managed to move from page to page and after flicking many times, the touch screen recovered and has been OK for the past 10 hours.
Guess one of the solutions for those who have intermittent problem is to flick your screen top and bottom. Guess the pressure must have connected any loose joints. I am a happy guy today )
Click to expand...
Click to collapse
Thats good to hear... see ... if you try , you can..congrats.
I have a HTC Touch Pro 2 and I am getting the Microp error. The phone is not covered by warranty so looks like I may have to attempt to fix it myself.
I notice your tutorial deals with the Diamond - Any idea how to fix a Touch Pro 2?
@ above
Bro . Microp error comes because of the connectors. Since this is a slightly bulky , twice as big as diamond and has a slide out keypad , i suggest you to take it to a guy who knows to remove and fix things back.. ( not service center ) .. he'll charge you probably 200-300 bucks...just tell him to reassemble it back. Let me know...
Regards
HTC Touch HD microp error solved
I recently made an attempt to do the same to a Touch HD which showed the same Microp error and know what , its working... PM me for the tutorial
( cant post on the diamond forum )
Regards
I needed new screen, the easy part was taking apart but stuck on these 2 connectors well the bigger one, even when apart it does not seem to go together?
Hello!
Only recently had i descovered this useful forum full of tweaks , apps , themes , and roms for my handset , so i entrust you with finding the best answers for my questions , for this is the best website i have found on the web regarding my issues.
I own a HTC Touch Diamond for over a year now. Nothing fancy , still has his original settings and stuff since the day i pulled it out of its case. Problem is , i got tired of my Windows Mobile 6.1 and decided to upgrade my headset OS to 6.5...
This is where my problems began. I read alot of tutorials , watched a "lifetime" of "how to" videos , i collected as much info as possibile regarding the update to 6.5;
I did find on the forum tons of W6.5 ROMs and downloaded a few that i personally admire.
Now the tedious part.Upgrading...
I followed all the instructions and managed to upgrade my ROM version. For an unknown reason , i managed to downgrade it ^^. Went back from 2.03 i think , to 1.87/1.37 (can`t recall now , its 7 in the morning and i`m at college) and said to myself "this should be normal , thats what tha tutorials sais".
I carried on and started the Windows install process. My headset screen turned into the familliar red/green/blue/yellow stripes as it was booting the new OS.
Then , a progress bar emerged and sat at 0% for almost 10 minutes. The progress bar on my laptop did the same thing : not budge for a long period of time. Thinking this is how it works , dead-slow at the start and eventually progressing towards the finish... Did not happen!
Instead , my phone froze it`s ass still , and the software responsible with installing my new OS errored out with a message sort of like : There was a problem bla bla connection bla bla , troubleshoot. Yeah , how kind of you!
Removed the PSU from the phone , inserted it back , and restarted. SURPRISE , it didn`t brick the F up! But now i`m stuck with an old version of the same 6.1 ROM with no GPS and wireless capabilities... Sweet!
Can any of you generous and intelligent gentlemen have the time/kindness to help me out on my problem? I fear bricking this once working , now broken down piece of "stinking waste" phone. I really like it and don`t have the financial means of buying another handset , so i would wish to keep it intact and working for as long as possibile...
If not , then advice me never to try to install a W6.5 ROM on it , maybe cause i heard collegues telling me the headset is old (obsolete maybe) and could not handle this new OS. If this is the case , at least i have your brilliant minds telling me this , and i will do so because i trust your knowledge.
Thank you , and looking forward to hear from you!
Vlad Vornicu , Bucharest (RO)
200+ views and no reply...
I need somebody to guide me step by step through the process , i am desperate!
My current 6.1 ROM is "broken" , my WiFi , my GPS and even SMS don`t work as they should...
Please help me somehow!
Hi everybody,
I'm using my O2X for 2 days and I notified that the touch screen seems to have some problems.
I thought first that it was due to stock rom and I switched to Modaco FR10 and after FR11 (today in fact ) same problem. I finally tried RomKitchen 1.6 with Cpasjuste kernel and it hasn't disappeared ...
My problem is that a part of the touch screen doesn't work correctly. Sometimes it works, sometimes it doesn't.
And sometimes, the whole screen/touch key doesn't respond, I must lock/delock the screen I order to solve the problem.
A video to illustrate my words :
http://www.youtube.com/watch?v=r7dOLL1U7JQ
And sometimes, the touch screen comes "crazy". As some lazy person is touching the screen non-stop and everywhere.
Do you think it's due to some software issue or do I need to change my phone ?
Thanks
That looks for me like a hardware problem.. Have never experienced something like that.
Only sometimes a first unlock try on pattern lockscreen fails, but second try it always registers my input..
I would go back to the shop and swap it!
Ok, I'm thinking of it too ... That's crap when it happens to himself
Do you know where to find stock rom/kernel ? I'm searching that with unroot/uninstall CWM
No response from my seller yet (Virgin Mobile France)
Here is a second video
http://www.youtube.com/watch?v=k_5Nc_VErq0
Hey guys so recently I've been having a permanent glitch on my phone. To be accurate, I just started realize this problem yesterday and it got a bit more serious today. It's like this:-
About 1.3cm from the search button softkey, my phone is not able to be touched. As in the screen touch doesn't work. I can't press the backspace key ( when I'm on cyanogenmod or IceCold ) and I can't press the enter key ( When I'm on Nik's ). When I go to Note ( I'm still on Nik's ) and I start to draw something, I can't draw all the way to the bottom of the page, it stops 1.3 cm away from the softkeys. It's that whole horizontal line of " unsensitive touch ". But I can still unlock my phone ( htc's ring lock ) tho I need to do it quick or I'd have to try again.
I tries flashing different ROMs but the problem persists. It's getting a little fustrating and I'm on wits end here on how to fix it. Have anyone had this problem before?
touch screen issue
Hi
i had the same problem, but with my sony ericsson satio. i didn't get it serviced or checked, but sold it off while buying a new phone.
i believe the issue is a touch-screen malfunction since multiple roms you have installed are unable to resolve the issue.
try taking it to a service center to flash the firmware. perhaps the touchscreen needs replacement.
hope this helps.
-f.
@farhadrarapore whatttt Nooo I was hoping no one would give me that answer.. Thanks a lot btw for the reply.. I guess I have to sell it then :''''(
Sounds like a hardware problem to me , but first take it to a GSM repair shop maybe its cheaper than to sell the whole thing and buy a new one...