I recently got my revolution, and had gotten it all flashed. I used it for the first day, and had no issues at all. The next day when I went to work, I would lock the screen and minutes later it would not come back on. I figured out it must have been a deep sleep issue after reading about the sleep of death. The reason I had no problems the first day is because it was plugged in the majority of the day, and tethering when it wasn't plugged in, so it never was able to go into deep sleep.
I was able to fix this problem by flashing gingervolted and then using the Blitzkrieg kernel. My phone will now gladly go into my pocket, and come out of sleep mode every time.
Hope this helps anybody else that might have this issue.
Usually if you have a problem with a newly flashes ROM all you need ti do is reflash did you recalibrate your battery after flashing?
Gingerfused Gingervolt 1.3 + Blitz
keynith said:
Usually if you have a problem with a newly flashes ROM all you need ti do is reflash did you recalibrate your battery after flashing?
Gingerfused Gingervolt 1.3 + Blitz
Click to expand...
Click to collapse
That is the thing, I flashed the stock rooted rom, I flash the gingervolted rom twice, and then I flashed gingerhome on top of the gingervolted rom the second time and it acted exactly the same way every single time.
Did you do a system wipe before all this?
Gingerfused Gingervolt 1.3 + Blitz
keynith said:
Did you do a system wipe before all this?
Gingerfused Gingervolt 1.3 + Blitz
Click to expand...
Click to collapse
Yea. Each time I flashed a new rom I would do a system wipe, cache wipe, and dalvik cache wipe.
thrasherht said:
Yea. Each time I flashed a new rom I would do a system wipe, cache wipe, and dalvik cache wipe.
Click to expand...
Click to collapse
Data wipe?
Sent from my VS910 4G using xda premium
Haro912 said:
Data wipe?
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
That would be system wipe. I wiped everything I could multiple times.
The problem was still there, as soon as I flashed the new kernal, the problem went away completely.
thrasherht said:
That would be system wipe. I wiped everything I could multiple times.
The problem was still there, as soon as I flashed the new kernal, the problem went away completely.
Click to expand...
Click to collapse
When flashing a new rom you should always wipe data otherwise you can get weird bugs. Like this.
Sent from my Transformer Prime TF201 using xda premium
Haro912 said:
When flashing a new rom you should always wipe data otherwise you can get weird bugs. Like this.
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
I did wipe. I wiped everything each and every time I flashed something. The problem was only fixed when I flashed MT's kernel.
The only time I don't wipe data is when the rom instructions tell me not to, like when you flash gingerhome.
Related
Im still very new to this. Im trying to install Fasty II, and im stuck at the AT&T logo, and im pretty sure its because i cant wipe the Dalvik cache. When i tried to wipe it, it just would do nothing.
First of all, I did confirm the wipe, i didnt hit no on accident
Anyway, whenever I try to wipe it, I get no error or anything, it just goes back, basically as if i am pressing No instead.
Everything that I did in the following order
1. Went back to stock with the Odin One-Click
2. Went to Download mode and installed the Captivate Gingerbread bootloaders (ran as admin)
3. Wiped the data and tried to wipe the Dalvik cache but nothing happened
And btw the same thing happens when trying to wipe battery stats
Am I doing something wrong, is it that there isnt a Dalvik cache (again Im a n00b), or something else entirely?
Probably included a lot of extra info just wanna be thorough.
Thanks in advance
Ginger bread boot loaders for a froyo rom? That's your problem, wrong boot loaders, man. Flash back to 2.1 stock and give a reread on the fasty instructions.
if you could try any of the button combos to get into download mode, you could flash back to stock there.
Or take out the battery, Sim and sd card, plug the phone the USB cord into the phone, hold the volume buttons down and plug the battery in, if it worked, you should be in download mode. Flash back to stock.
If those two didn't work, look into a jig.
Sent from my SGH-I897 using XDA App
Born2BeMild said:
Ginger bread boot loaders for a froyo rom? That's your problem, wrong boot loaders, man. Flash back to 2.1 stock and give a reread on the fasty instructions.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
No its Fasty II, which is gingerbread
Really, strange, haven't seen it.
Edit: okay, I saw, my mistake, I thought you meant the fasty 2.0+ versions.
Sent from my SGH-I897 using XDA App
Born2BeMild said:
Really, strange, haven't seen it.
Edit: okay, I saw, my mistake, I thought you meant the fasty 2.0+ versions.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
No worries
Born2BeMild said:
Really, strange, haven't seen it.
Edit: okay, I saw, my mistake, I thought you meant the fasty 2.0+ versions.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Either way, the gingerbread boots are backward compatible. Doesn't matter if he was installing a froyo rom or gingerbread. They work either way.
OP: how did I install cwm? Could just be that version doesn't confirm when deleted although it is wiping it. Either way not wiping dalvik should not cause a boot loop, if it was all clustered you would be laggy and perhaps a few apps force close, but it should boot.
Try and re download the rom and reflash.
studacris said:
Either way, the gingerbread boots are backward compatible. Doesn't matter if he was installing a froyo rom or gingerbread. They work either way.
OP: how did I install cwm? Could just be that version doesn't confirm when deleted although it is wiping it. Either way not wiping dalvik should not cause a boot loop, if it was all clustered you would be laggy and perhaps a few apps force close, but it should boot.
Try and re download the rom and reflash.
Click to expand...
Click to collapse
Well I tried re-downloading and still get the boot loop.
After installing gingerbread bootloaders, im pretty sure i just did the update.zip way of getting cwm. idk if cwm has been updated since i got it, which was quite a few months ago, but ya idk if that means anything
EDIT: I think it actually was CWM, i tried flashing again, got the bootloop, went into CWM, and it was a diff color so im assuming it was updated, and flashed it again and it worked.
Thanks for the help
EDIT 2: Spoke too soon, stuck at startup now. Has been on the Galaxy S Screen for the last 10 mins
The cwm after the first flash is the one makes into the kernel.
If it doesn't loop the animation and is just staying at the S it should be re building dalvik which takes awhile
All right it works now thank you
I'm having force close issue but I'm not using the app. Also there are times my fone still hangs even after upgrade to 2.3.4
Yesterday I just deleted dalvik cache using root explorer. Did I lose anything?
another problem: when my fone is sleeping there are times it doesnt open. the lockscreen wont appear so i have to long press the open button to reboot or take off the battery. any solution?
softpinkishlips said:
I'm having force close issue but I'm not using the app. Also there are times my fone still hangs even after upgrade to 2.3.4
Yesterday I just deleted dalvik cache using root explorer. Did I lose anything?
another problem: when my fone is sleeping there are times it doesnt open. the lockscreen wont appear so i have to long press the open button to reboot or take off the battery. any solution?
Click to expand...
Click to collapse
I had that issue when i was still learning. You accidentally deleted something within the phones framework.
Wipe your phone and reflash a 3 part file ROM. If i were you go get the JVS or the JVT one. Also, delete the dalvik from CWM.
try to format cache and dalvic cache
my rom is jvr.
how to format dalvik cache?
actually even before i deleted dalvik cache, im having problems already with my fone
softpinkishlips said:
my rom is jvr.
how to format dalvik cache?
Click to expand...
Click to collapse
go to cwm recovery by holding vol up+home+power button.
goto advanced->wipe dalvik cache.
nothing will happen on my other apps if i do that?
try the answer on this.
this will be the best solution on your problem by flashing the a stock GB.
http://forum.xda-developers.com/showthread.php?t=1297366
I agree with hackfinn, however softpinkishlips you need to be more detailed in your posts, is that a stock rom or custom rom, did you update via kies?
softpinkishlips said:
I'm having force close issue but I'm not using the app. Also there are times my fone still hangs even after upgrade to 2.3.4
Yesterday I just deleted dalvik cache using root explorer. Did I lose anything?
another problem: when my fone is sleeping there are times it doesnt open. the lockscreen wont appear so i have to long press the open button to reboot or take off the battery. any solution?
Click to expand...
Click to collapse
What ROM are you using? A custom ROM? Custom kernel?
JVR
Sent from my GT-I9000 using XDA Premium App
softpinkishlips said:
JVR
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Stock? Custom?
Sent from my GT-I9000 using Tapatalk
Gt-i9000/ gb 2.3.4 / i9000xxjvr
sori i dont know if this is stock or custom. Zeb from other forum helped me. I thought i wont experience the hang anymore though it became lesser when I upgraded to 2.3.4.
softpinkishlips said:
Gt-i9000/ gb 2.3.4 / i9000xxjvr
sori i dont know if this is stock or custom. Zeb from other forum helped me. I thought i wont experience the hang anymore though it became lesser when I upgraded to 2.3.4.
Click to expand...
Click to collapse
Best is to reflash since I don't have much information to salvage from your configuration.
If you're using Supersonic or a ROM that disables journaling, you'll get FCs if you encounter a power loss. That's normal. The solution is to reflash anyways.
There is nothing wrong with your phone. there is something wrong with your searching skills.
ALL rom's JVR, JVS have FC on the Phone.apk.
IF you'd be able to change your pampers by yourself, you'd use SEARCH feature to find it:
Simple, isn;t it? and flash
Someone has to teach me. I'm not technical when it comes to roms and flashing. I just do what I am told to do
Sent from my GT-I9000 using XDA Premium App
1. Download correct version from above link.
2. Put it on your SD card
3. Reboot your phone to recovery mode
4. Install via option: install update from zip, navigating to the downloaded zip file.
5. Reboot
6. Check if helped and give feedback.
Hi spam,
Should I need to back up my apps?
Sent from my GT-I9000 using Tapatalk
Nope.
This is Phone App only, so you can make a backup of your messages and contacts, everything else should remain untouched.
Hi spam,
There are two files. Dunno which one is right for my fone
Sent from my GT-I9000 using Tapatalk
wifi doesn't work here, only send message "WIFI error" wi i fix this
Did you do a full wipe? I suggest redownloading the Rom , do a full wipe and reflash. Sorry for the trouble
Sent from my HTC Wildfire S using Tapatalk
maximo360 said:
Did you do a full wipe? I suggest redownloading the Rom , do a full wipe and reflash. Sorry for the trouble
Sent from my HTC Wildfire S using Tapatalk
Click to expand...
Click to collapse
yes i do a full wipe, now i redonwloading the Rom for a reflash. bluetooth don't work
Bluetooth and WiFi doesn't work, i Reflash but it still don't work
lockheadgas said:
yes i do a full wipe, now i redonwloading the Rom for a reflash. bluetooth don't work
Click to expand...
Click to collapse
go into fastboot and do fastboot erase system -w
just to be 100% sure that everything is gone when you are wiping
use ohsaka superwipe 2 before flashing. following is the xda link. I'm using this Rom at present. it runs very smoothly on G1. The only issue I have is moving apps to ext partitions.
http://forum.xda-developers.com/showthread.php?t=834812
i'm going to do this
Hello, I'm having some worrying problems with my device
Like many of you I've been eagerly following TheWhisp in his journey to bring us JB, I had managed to stop myself flashing the earlier experimental versions so as not to just tease myself with a non-daily ROM, but when he announced he'd fixed the incoming call problem I had to try it! I installed the update from the 17th of Jan, everything was going pretty good.
I flashed back to stock via Odin first, booted, thumbed around a bit for nostalgia as I'd been running ReginaROM since it came out. The Cyanogenmod started becoming more and more unstable the next day, things crashing, reboots etc. I thought ok, no problem, I'll go back to Regina and wait. I flashed back to stock again to get a fully fresh install going as that's just the way I like to do things.
My problem is that the stock ROM won't boot, the Samsung logo glows away as normal, but after a moment I get the short vibration followed by three blips of vibration indicating something has crashed, after which the startup animation and sound plays again and the process repeats, I can never reach the lock screen.
Does anyone have any idea what's going on?
it's a bootloop, have you tried to wipe data from CWM?
Yeah I've tried wiping cache, dalvik cache and factory reset.
did you try wipe data/cache and dalvic cache on squads cwm??
Where else would I do it? haha I don't mean to sound *****y
I can't figure it out, I've done everything I can think of, seems sort of bad that I can't get my stock firmware to work if I ever need to go back to it.
Biggles_me said:
Where else would I do it? haha I don't mean to sound *****y
I can't figure it out, I've done everything I can think of, seems sort of bad that I can't get my stock firmware to work if I ever need to go back to it.
Click to expand...
Click to collapse
You have to wipe data after installation of the stock ROM. I had the same problem with the previous build. Just enter in CWM and wipe.
Sent from my GT-S6500 using xda premium
fenomen0 said:
You have to wipe data after installation of the stock ROM. I had the same problem with the previous build. Just enter in CWM and wipe.
Sent from my GT-S6500 using xda premium
Click to expand...
Click to collapse
wipe all in cwm > download mode > put stock rom and wipe one more time all.
fenomen0 said:
You have to wipe data after installation of the stock ROM. I had the same problem with the previous build. Just enter in CWM and wipe.
Click to expand...
Click to collapse
zalukajonet said:
wipe all in cwm > download mode > put stock rom and wipe one more time all.
Click to expand...
Click to collapse
Ah I didn't think of that, thanks guys I'll have a go when I get a chance this evening.
So, I have a Galaxy Exhibit II 4g (Sold here in Canada on Bell's network as the Galaxy W sgh-t679m).
I've had no troubles rooting the device (Though I forget where I got the package to root it and it's not one of the ones on the wiki), or installing CWM, however: My main goal was to get some manner of JB rom set up on the device.
I've tried both Linaro CM 10 and Slimbean.
The problem I'm encountering (with either of them) occurs after flashing the new rom.
When "starting" with the new rom for the first time, it just repeats the loadscreen animation indefinitely. I tried leaving it overnight and it was still doing it. However, When I flash back to the stock rom it works just fine.
Has anyone else encountered this problem? Do you know how to make this problem go away, and make either of the two roms load?
Did you do a wipe before flagging the ROM?
Sent from my SGH-T679 using Tapatalk
Did you do wipe system + cache + dalvik cache then install ROM then wipe dalvik cache + fix permissions?
If not try that. I doubt 2 desperate downloads are at fault here.
Sent from my CM10 Linero Odexed Powered by Evil
Thanks
Aha!
Before, I formatted data and wiped cache. Didn't know to wipe Dalvik Cache or fix permissions.
Thanks afwolfpacked!
What are you using to flash with. Cwm 6.0.1.2 or twrp. You will need to ensure system is wiped. Clean installs I'm twrp for thoroughness I do:
System wipe
Cache wipe
Dalvik cache wipe
Factory reset
Internal storage wipe
Android secure wipe
Post install:
Dalvik cache wipe
fix permission
Reboot
Initial setup: for 5 - 10 minutes don't do anything to phone for complete setup installation from ROM flash before completing initial setup
Sent from my CM10 Linero Odexed Powered by Evil
afwolfpacked said:
What are you using to flash with. Cwm 6.0.1.2 or twrp. You will need to ensure system is wiped. Clean installs I'm twrp for thoroughness I do:
Click to expand...
Click to collapse
I'm using CWM 6.0.2.5.
I did everything but the factory reset. It installed great, but I'm finding that it crashes constantly now that it's up and running (CWM, Linaro CM10, SpeedyGonzales Kernel).
I'm going to try swapping out the Kernel and see if that makes things go a bit better. Going to try Jocalas first. The Demon's Blood Kernel Link is dead.
I'll update the post after I see how Jocalas Kernel works out even though it's not rigged specially for JellyBean - hopefully it will be more stable.
Can someone link me some alternatives or give me some suggestions.
Sylrae said:
I'm using CWM 6.0.2.5.
I did everything but the factory reset. It installed great, but I'm finding that it crashes constantly now that it's up and running (CWM, Linaro CM10, SpeedyGonzales Kernel).
.
Click to expand...
Click to collapse
I don't think the factory reset is optional.
meekrawb said:
I don't think the factory reset is optional.
Click to expand...
Click to collapse
Well, I followed afwolfpacked's instructions to the letter (which didn't include the factory reset).
It installed fine, it just seems rather unstable and it crashes frequently.
Sylrae said:
Well, I followed afwolfpacked's instructions to the letter (which didn't include the factory reset).
It installed fine, it just seems rather unstable and it crashes frequently.
Click to expand...
Click to collapse
Factory reset is NOT optional, check the instructions again. Of course it will install with out wiping, it just wont work well hence the reason you are getting crashes.
Sent from my Nexus 7 using xda app-developers app
theAPANT said:
Factory reset is NOT optional, check the instructions again. Of course it will install with out wiping, it just wont work well hence the reason you are getting crashes.
Click to expand...
Click to collapse
I went back into CWM to switch the kernel, and I looked at the menu options. I thought wipe data and factory reset were separate options, and that I had done the wipe data and not the factory reset. Apparently I *DID* factory reset, as they are apparently the same thing.
So my bugs must be caused by something else. I'm hoping it's the kernel, not CM10.
Suggestions on the Kernel to use?
Sylrae said:
Suggestions on the Kernel to use?
Click to expand...
Click to collapse
You aren't able to download this:
http://www.androidfilehost.com/?fid=9390288116658471104
Although I don't see how it could be the kernel as it happened to you on slimbean as well.
Sylrae said:
I went back into CWM to switch the kernel, and I looked at the menu options. I thought wipe data and factory reset were separate options, and that I had done the wipe data and not the factory reset. Apparently I *DID* factory reset, as they are apparently the same thing.
So my bugs must be caused by something else. I'm hoping it's the kernel, not CM10.
Suggestions on the Kernel to use?
Click to expand...
Click to collapse
Have you tried just installing CM10 and NOT another kernel? CM10 has it's own kernel built-in.
meekrawb said:
I don't see how it could be the kernel as it happened to you on slimbean as well.
Click to expand...
Click to collapse
I was having a different problem with slimbean. I hadn't known the fix permissions or clear dalvik cache and it wasn't starting. I tried both it and Linaro CM10, and I definitely like Linaro CM10 better, at least until it started constantly crashing.
meekrawb said:
You aren't able to download this:
http://www.androidfilehost.com/?fid=9390288116658471104
Click to expand...
Click to collapse
I hadn't come across that particular link actually; and it downloaded just fine. I'll have to give it a try.
shakatu said:
Have you tried just installing CM10 and NOT another kernel? CM10 has it's own kernel built-in.
Click to expand...
Click to collapse
Hmm. No I hadn't realized that. The Linaro CM10 page made it seem like you needed another kernel.
Thanks guys. I'll give them a try tomorrow, and I'll let you guys know if either of those options works out.
If not, I may just have to go back to Slimbean, which didn't have as many shiny features (being slim), but seemed much more stable than the linaro cm10+speedy kernel.
By the way, you guys have been awesome. Done some other modding things before, but this is my first attempt at modding android; and you guys have been a huge help in figuring out how it works.
SG kernel is old and slow compared to evil or demons blood v8 and both those play nice with linero
Sent from my SGH-T679 using xda premium
afwolfpacked said:
SG kernel is old and slow compared to evil or demons blood v8 and both those play nice with linero
Sent from my SGH-T679 using xda premium
Click to expand...
Click to collapse
Yeah. now that I've installed DBv8, things are running much better. The phone's been running since I made that last post, and it hasn't crashed once.
What are the big differences between the linero kernel, DBv8, and Evil?
The linero kernel was optimized but still stock. Powered by Evil and Demons Blood v8 are near on par with each other and are overclockable. I believe sio was included in IO for DB v8 and not in evil and a few differences in governers. Not much differences in those 2.
Sent from my SGH-T679 using xda premium