Hi someone!
Please help!!!! I've flashed the sephamore kernel, but now it gets hanged, basically my phone has never been rooted nor flashed before. Today is the first time im doing it and it hangs i really need someone to help!
Please help someone!!!!
I've used Odin put it under PDA as set, but after flashing (I get the green light on odin and pass) it just hangs on boot!!!!
I'm able to achieve download mode!
Did you flash the right kernel for your firmware? What version was the rom?
If it was wrong, either a) Flash an appropriate kernel for the firmware, or b) Flash a complete firmware w/ kernel (Either a stock or custom firmware will work)
Option b should be a guaranteed way to get your phone working again.
Related
Hi,
was very interested in rooting my phone (Samsung Galaxy S) and putting a custom rom on it. I managed to put on Darky's latest rom last night. However it was giving me problems with the Android market (it crashed when it came to the installation part). Therefore, I want to get rid of all the modifications I made to my phone and go back to the settings how the phone was shipped to me.
How can I do that?
I already downloaded the original firmware (2.2.1) using this forum. It is a .tar file and I tried to flash it with Odin. Seemed to work at the beginning but there were still some elements, like apps, of the old Rom left. So I did the process again.
Now my phone starts up but after the boot screen I only have a black screen with the typical crash vibration patterns all the time. After flashing it again I get into the recovery mode showing errors.
Can somebody please tell me how to go back to my original firmware, without a custom rom, root access etc.?
I'm afraid that I will brick my phone now.
thank you
(I searched this forum but couldnt find anything related to my question)
get yourself a firmware that comes in 3 files.... or a firmware than you can re-partition with 1 file.....
go into odin, check repartition and select pit (downloaded with firmware)
flash your phone and that should do the job
Hi guys,
i just got a Galaxy S (international, germany) and wanted to flash Clockwork Mod so i can flash a custom rom (miui). I got it with version 2.2 so i rooted it with z4root 1.3 and then tried RomManager to get CWM on it. But it did always reboot into Samsung stock recovery mode. So i tried this Odin3 1.7 and flashed a Kernel and got into a bootloop (First this one, then i used the one promoted in this video (YouTube Video, description XDA Thread with promoted Kernel. Phone now stuck at booting (isn`t even bootlooping, just stuck at the GALAXY S GT etc. logo. I still can reach the Download Mode.
Can anyone please help how to get at least the phone working again I`m really desperatly.
Greetings from Germany & Merry Christmas
Alch
Install a new Rom with odin will make your phone boot again.
2.2 is probably too old now.
Upgrade to Gingerbread Stock using Odin. Turn on Repartition and follow the instructions to flash.
Download a Custom Kernel for the Gingerbread firmware that you flashed. Every Kernel except the stock comes with CWM Recovery.
Copy the MIUI zip file to sdcard and flash it with recovery. It should boot right up.
If you are still having bootloops, try doing a factory reset and then boot MIUI.
Don't try things that you aren't experienced with.
Anyway, download odin 1.85, flash stock Froyo, launch Kies, update to official Gingerbread, launch Odin, flash Semaphore Kernel and GG.
Merry Christmas!
How can i flash Stock Froyo/Gingerbread trough Odin? Can`t find anything usefull @ google
btw i can reach Recovery Mode (CWM / Speedmonk something)
(Kinda experienced by flashing around with my N1 for around 2 years now, but never heard about this Odin Program)
thanks for help anyway
AlchemistEDW said:
How can i flash Stock Froyo trough Odin? Can`t find anything usefull @ google
(Kinda experienced by flashing around with my N1 for around 2 years now, but never heard about this Odin Program)
Click to expand...
Click to collapse
I am not going to help you with this one. You need to get comfortable with the forum and its contents first. Read all the guides and stickies before proceeding with Firmware flashing. There are many different types of firmwares with Bootloaders which are often dangerous to flash and few without bootloaders. Hence, first go through the guides and go with the flashing only when you are confident that you are doing everything in right order.
http://forum.xda-developers.com/showthread.php?t=1379853
Just do what dhiru1602 says. after you flashed it with the latest Gingerbread ,
flash the cf-root kernel with odin . than download the latest galaxian/semaphore kernel, copy it to your internal sd-card and flash it with the app SGS Kernel Flasher . you can find that app on the market. good luck mate !
Thanks guys, u really saved christmas for me Just booted up the latest Miui Rom!
Happy Holidays
Alch
Hi,
I was trying to install cynogenmod 7.1 on my galaxy s vibrant i9000. My carrier is bell
Model Number GT-I9000M
Firmware Version 2.3.3
Baseband Version I9000UGKG3
Kernel Version 2.6.35.7-I9000UGKG3
[email protected]#2
build GINGERBREAD.GKG3
When I was trying to do go in recovery mode, backup Rom or change ROM with ROM manager, it went on the 3e recovery setup and was saying something about the whole-signature failed. I've read somewhere that this was due to the fact that my kernel was restricting something and that I needed to change my kernel with Odin in order to not being signature verifed anymore. So I picked up a kernel on a forum and tried to put it in my galaxy s in download mode with Odin and the PDA button while having the re-partition button unchecked.
After doing so, odin said that the operation failed and when I disconnected my phone, there was only a small icon showing a cellphone and a computer with a small triangle with a ! in it between the cellphone and the computer. In other words I messed things up and my sgs wont boot anymore.
Can someone give me a good kernel to put in my phone so it can reboot? Because I still can go in download mode!
I know, Im a total newbie...
Thanks
I assume that the ID:COM box in Odin went yellow before you pressed the Start button initially....
If not, that's your first problem that needs to be addressed, as you can't flash unless Odin can see your phone.
You can get a rooted kernel here.
If that doesn't get you up and running and you haven't downloaded UGKG3, go here and search for UGKG3 and download it.
omg, thank you sooooooo much! It worked!
Do you know a kernel that I could use to for my phone to accept custom ROMs ?
Glad that worked.
UGKG3 does not have a lot of support from the developer community, as it's a rather rare release with only a couple of carriers using it.
Semaphore and CF-Root seem to be the popular ones that include CWM.
Not sure which one you would use with UGKG3, as it's not well supported.
so i have been running Paranoid android for a while, and wanted to try this out:
http://forum.xda-developers.com/showthread.php?t=2051904
flashed the latest cm10.1 kernel, and then formated cache, dalvic, battery stats, etc.
then i managed to reboot before i had flashed the new rom and got stuck in bootloop. could not access CWM any more
after this i downloaded odin after a few forum reads, and flashed different versions of CWM to see if i could get back in to flash the rom.
the latest one i have in it is this:
http://fs1.d-h.st/download/00033/pQK/GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar
as it was recommended in some un-brick thread. still no access to CWM
after this i flashed a stock rom, as i could not find any .md5 or .tar roms to use with odin, and i got at least a samsung logo on hte screen, before i got back to boot screen and was stuck there again.
CWM still not working, or showing up in any way.
out of obvious options i now tried flashing the pit file trough odin from this thread
http://forum.xda-developers.com/showthread.php?t=1424997
and after this the samsung boot logo did not show up anymore. only boot loop
i am now going to try and download the older ginger bread rom and flash it trough odin, but i got no idea if it will make any difference.
otherwise phone goes to download mode just fine, and i got working drivers in windows trough kies.
im quite new to this, and dont really know what would work from here. ill end up hard bricking the phone if i don't get some help, and the trash can will be my n7000 next home.
any advice is welcome
--------------------------------------------------------------------
EDIT:
flashing official rom again after the pit file acrually gave me a working phone again. also i now got 50 gb of drop box storrage for free, so thats nice
Hello
I am trying to boot my phone into recovery using the combo buttons, however it does not it just loops back to the "samsung galaxy note n7000 " screen. I can get into download mode.
I am trying to install N7000DDLSC, N7000DDLS6 rom, which is a stock 4.1.2 JB rom.I did download an odin version but i think i am struggling to find a compatible kernel (odin version) Can someone please help me find one or even give me a solution to fixing my no recovery problem. btw i have tried the following kernels but when i flash the rom via odin it fails at the "factoryfs" stage.
philz-cwm6-ddlsc-odd-4.90.8
philz-cwm6-xxlsc-xjb-4.35
philz-cwm6-xxlsz-oxa-4.90.8
Thanks for any help
does the phone boot normally?
why are you trying to find a kernel before flashing the rom as the rom will have its own kernel.. kernel doesnot matter if you are flashing via odin
remove the battery and put it back in.. the press volup+home+power till you see N7000 logo and leave the buttons.. try this without the usb cable connected.
Have you followed dr.ketan steps in flashing stock ROM (USB driver, odin) (dr.ketan thread)
What button combo you use to go to recovery? is it as nokiamodeln91 mentioned?
In download mode, does ID:COM box becomes yellow after connecting device to USB?
Flashing stock firmware will flash stock kernel as well.. so no need to flash kernel separately unless you want advanced cwm with extra features (like philz kernel)