as it says in the title active sync and windows mobile device center doesnt work either allthough it was advised in some threads any advice thanks
Are you sure your bootloader isn't halfbricked?
JamesKroll said:
Are you sure your bootloader isn't halfbricked?
Click to expand...
Click to collapse
it was halfbriked because of trying to rspl with spl 4 but the got a update which gave me spl 5 so now its not halfbriked am i right do u know a way around this
Can you send me a picture of your SPL?
JamesKroll said:
Can you send me a picture of your SPL?
Click to expand...
Click to collapse
hi there sorry for the bad pics
pd29100 ss-bc (4k)
spl-5.10.2250.0(132274) mng
microp(led) 0x07
touch s1 (v1.8,#1624
sd sandisk 15193mb
partition info-v211v413
f400
heres what it says just in case pics r too bad
Is there anything in the white bar, it should say "Serial" or "USB" if it doesn't than it is still half bricked and you should follow the attached guide to build a Y-Cable and the GoldCard thread.
GoldCard thread>> http://forum.xda-developers.com/showthread.php?t=893152
JamesKroll said:
Is there anything in the white bar, it should say "Serial" or "USB" if it doesn't than it is still half bricked and you should follow the attached guide to build a Y-Cable and the GoldCard thread.
GoldCard thread>> http://forum.xda-developers.com/showthread.php?t=893152
Click to expand...
Click to collapse
i have spl 5 thats y there is no usb/serial message and i have y cable and goldcard but when i plug my phone in and plug usb flash drive in it says loading then reboots then loading then reboot and never actually boots the goldcard or rom file just loading then reboot any advice i left my phone and it dd this process for 20 mins just rebooting and loading only loads for two secs by the way then reboot
I think any SPL version has the "USB/Serial" But I'm not sure. When you use GoldCard method you do go into USB Host Mode right?
Your SD Card is GoldCarded right?
---------- Post added at 12:16 PM ---------- Previous post was at 12:11 PM ----------
Did you say you used USB Flash Drive??? You have to use a GoldCarded SD Card
JamesKroll said:
I think any SPL version has the "USB/Serial" But I'm not sure. When you use GoldCard method you do go into USB Host Mode right?
Your SD Card is GoldCarded right?
---------- Post added at 12:16 PM ---------- Previous post was at 12:11 PM ----------
Did you say you used USB Flash Drive??? You have to use a GoldCarded SD Card
Click to expand...
Click to collapse
i dont fink spl5 does any way yh i go into usb host mode vol down and camera button and yh i have 4 gb usb flash drive and i put ruu.signed file and renamed it schuimg and then started goldcard tool and followed steps but it says loading for two secs then reboot process
messdup said:
i dont fink spl5 does any way yh i go into usb host mode vol down and camera button and yh i have 4 gb usb flash drive and i put ruu.signed file and renamed it schuimg and then started goldcard tool and followed steps but it says loading for two secs then reboot process
Click to expand...
Click to collapse
and i have seen post and videos proving that u can use usb flash drive do u think sd reader would make a difference
I haven't seen any tutorials saying you can use USB. All I know is I had SPL 5, tried to instal RSPL, got halfbricked. And had to goldcard with a GoldCarded SD Card.
I'm not saying your wrong I'm just saying thats all I know.
I hope you can find a fix, I'd suggest trying to GoldCard with an SD Card that has GoldCard, it may change it but IDK. I will ask some people that helped me to help you (link them to this thread) so that you can solve this.
Good luck solving this, I'll tell you if I find anything that might help.
JamesKroll said:
I haven't seen any tutorials saying you can use USB. All I know is I had SPL 5, tried to instal RSPL, got halfbricked. And had to goldcard with a GoldCarded SD Card.
I'm not saying your wrong I'm just saying thats all I know.
I hope you can find a fix, I'd suggest trying to GoldCard with an SD Card that has GoldCard, it may change it but IDK. I will ask some people that helped me to help you (link them to this thread) so that you can solve this.
Good luck solving this, I'll tell you if I find anything that might help.
Click to expand...
Click to collapse
dude u been a great help done it with a sd reader it says enter usb host mode with everything plugged in how long do i wait untill it will read it
First off, is the SD Card GoldCarded? If not let me know and I'll provide you with links do the programs
JamesKroll said:
First off, is the SD Card GoldCarded? If not let me know and I'll provide you with links do the programs
Click to expand...
Click to collapse
yh goldcarded with a goldcard img from a thread on here and goldcarded with one of the tools on here it just says enter usb host mode
Did you rename the RUU_Signed.nbh to SCHUIMG.nbh?
JamesKroll said:
Did you rename the RUU_Signed.nbh to SCHUIMG.nbh?
Click to expand...
Click to collapse
yh is that the only thing i copy or do i put all the files on sd card aswell
No just SCHUIMG.nbh should be on the SD Card, you can also try putting the Goldcard.img on the SD Card, I think I had that on there when Flashed my phone. Also, make sure your not using a custom rom when using GoldCard method. Only stock roms
JamesKroll said:
No just SCHUIMG.nbh should be on the SD Card, you can also try putting the Goldcard.img on the SD Card, I think I had that on there when Flashed my phone. Also, make sure your not using a custom rom when using GoldCard method. Only stock roms
Click to expand...
Click to collapse
yh stock nodo rom i had goldcsrdimg on there anyway shuld i remove it
First off, do you have a built in SD Card reader on your computer?
If not do you have an Android or Windows Mobile 6 device?
JamesKroll said:
First off, do you have a built in SD Card reader on your computer?
no using sd card in card reader
Click to expand...
Click to collapse
Related
Hi guys, got a problem here. Need to return my HTC Touch HD for warrant purposes, basically the USB connection doesnt work - it charges but nothing else, 3 PC's and 3 leads wont even acknowledge that its connected to a pc (yet it charges?!?).
To return it, i need to restore standard ROM and SPL but obviously because of the problem i cant connect it to a pc to flash!!
Any ideas appreciated!!
If you got HSPL you can copy the blacimg.nbh on sd card and let the bootloader flash.
Im not sure but i think it should be possible with non hspl if you flash a stock rom because spl/ipl are included to shipped roms.
Ulti
Ultimaex said:
If you got HSPL you can copy the blacimg.nbh on sd card and let the bootloader flash.
Im not sure but i think it should be possible with non hspl if you flash a stock rom because spl/ipl are included to shipped roms.
Ulti
Click to expand...
Click to collapse
As already said, you can flash the stock rom from your SD card, by copying the .nbh file into the root directory of your SD card and renaming it BLAC_IMG.nbh. Power device off, press and hold the volume down key, and press the power button to get into bootloader. The image file will be shown on the screen - just follow the instructions.
However, this will not flash the SPL as HSPL is protected from being overwritten. Not sure how you can get around this one without being able to use USB.
According to the HSPL thread, the HSPL is protected to be overwritten, so flashing SPL without the restoration pack in HSPL thread should not work.
I recommend you back up all your data and do a Hard Reset, then try to sync with your PC.
If it still not work, eject your SD card and try power on your phone while holding VolDown, this will enter the bootloader (tri-color screen). Connect the USB cradle, when the bottom of the screen shows "USB" instead of "Serial", launch the Stock-SPL restoration pack from the HSPL thread and follow the instructions.
maddie said:
If it still not work, eject your SD card and try power on your phone while holding VolDown, this will enter the bootloader (tri-color screen). Connect the USB cradle, when the bottom of the screen shows "USB" instead of "Serial", launch the Stock-SPL restoration pack from the HSPL thread and follow the instructions.
Click to expand...
Click to collapse
Tried this but it still showed 'Serial' after i connected the USB lead!
Using the SD card method im gonna be able to get a stock ROM back on there so thats a start!
I've got HSPL not USPL
Anyone know how strict HTC UK are at checking warranty returns?
More issues!!! I cant even use the SD Card method, i formatted my card and copied BLACIMG/BLAC_IMG (2 guides named the file differently) to the root of the card, when i go to boot loader it says image not found. WTF???
The file must be named BLACIMG.nbh. Furthermore it seems that some cards don't work, so maybe you have bad luck .
But, as already said, this doesn't help you at all, as you need to restore the SPL, too, which isn't possible without an USB connection.
what was the outcome re your phone?
when I turn on the phone restarts continuously at htc logo ... it turn on only when connected with cable to pc .. the phone does not see the sd and the pc does not see the phone .. I have already done hard reset but nothing.. I can not use adb and go into recovery(because the pc doesn't see the phone!) ... what should I do? please help me..
http://forum.xda-developers.com/showthread.php?t=751265
try follow that guide. It helped me
mertins said:
http://forum.xda-developers.com/showthread.php?t=751265
try follow that guide. It helped me
Click to expand...
Click to collapse
my pc don't recognize my phone..so sdk don't recognize the device..please help me..
reddev said:
my pc don't recognize my phone..so sdk don't recognize the device..please help me..
Click to expand...
Click to collapse
dudddeeeee calm down. let me start off by saying your phone is fine so relax. do you have an sdcard reader or something? basically something that will allow you to put a file on the sdcard and then back into the phone? cause all you gotta do is use this "update.zip" thingy. basically you go into recovery, press some buttons and then bam clockworkmod recovery. and then from there u just do a wipe and put on a rom that works (to provide you with more comfort, as im typing this my phone is actually bricked as well lol cause ive been waiting like 10 min for it to start since i put this new rom on. so ill just quickly fix that) let me know if u can get something to read ur sdcard and ill provide you with more info
i'm following this guide..i have problem with connecbot..when i type the commands it says no such file...but in my sd there are the files!!!...
Follow this guide since you're obviously usb bricked:
http://forum.xda-developers.com/showthread.php?t=751265
Sent from my Legend using Tapatalk
tryll1980 said:
Follow this guide since you're obviously usb bricked:
http://forum.xda-developers.com/showthread.php?t=751265
Sent from my Legend using Tapatalk
Click to expand...
Click to collapse
I resolved with this guide..thanks at all guys!!!
Help please - I tried to upgrade to CM6.1, have done it s few times i the past with great success and no idea what went wrong. believe i accidentally wipe Davik Cache. The Rom loaded, but now I'm unable to mount SD Card. I'm also unable to use ADB on WIN7 Ultimate suddenly. Have read numerous threads and google topics and have tried several solution.
1. modify google usb driver ( R8 SDk pakage)to include legend
2. various versions of HTC Sync to get the drivers.
3. using Deview to remove all HTC devices, etc
Is there anyway to mount the SD Card without ADB, then to recovery and flashing again?
PLEASE HELP
I downloaded the latest CM10 ROM but when I was flashing it I came across an error, and now I have no other ROM on my phone so I need to transfer one from my PC, but it doesn't go past recovery mode. So i searched XDA and found an answer that said to MOUNT USB from recovery on clockwork mod, but that didn't help, my PC doesn't recognize the phone except as an unknown device, i.e i cant explore it and drivers i found on XDA didn't help to recognize the device. Please help. I have the new CM10 ROM downloaded and ready, how do I transfer it to my phone?
kautilyadas said:
I downloaded the latest CM10 ROM but when I was flashing it I came across an error, and now I have no other ROM on my phone so I need to transfer one from my PC, but it doesn't go past recovery mode. So i searched XDA and found an answer that said to MOUNT USB from recovery on clockwork mod, but that didn't help, my PC doesn't recognize the phone except as an unknown device, i.e i cant explore it and drivers i found on XDA didn't help to recognize the device. Please help. I have the new CM10 ROM downloaded and ready, how do I transfer it to my phone?
Click to expand...
Click to collapse
Use a card reader if you have an external SD card in your Note.
chasmodo said:
Use a card reader if you have an external SD card in your Note.
Click to expand...
Click to collapse
well i don't have a microSD card reader, i have an SD card reader on my laptop. but isn't there anyway to do it via PC? it used to recognize my phone fine until this happened
Cant put in download mode?
Sent from my GT-N7000 using xda app-developers app
kautilyadas said:
well i don't have a microSD card reader, i have an SD card reader on my laptop. but isn't there anyway to do it via PC? it used to recognize my phone fine until this happened
Click to expand...
Click to collapse
i dont know which rom were u on before... but i am on stock 404 with philz kernel which has cwm v6.0.1.4 semi touch recovery..
just tried.. booted into recovery... mounts and storage.. mount USB drive..
its shows both the internal storage and SD card.. so it works..
praetorius said:
Cant put in download mode?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
nope. why, how would that help?
nokiamodeln91 said:
i dont know which rom were u on before... but i am on stock 404 with philz kernel which has cwm v6.0.1.4 semi touch recovery..
just tried.. booted into recovery... mounts and storage.. mount USB drive..
its shows both the internal storage and SD card.. so it works..
Click to expand...
Click to collapse
well not for me, tried on different computers too. idiotic question: do i require different drivers :/ because i don't know why it wouldn't detect otherwise
actually no.. i just have kies installed and samsung ADB drivers
---------- Post added at 09:21 PM ---------- Previous post was at 09:19 PM ----------
kautilyadas said:
nope. why, how would that help?
Click to expand...
Click to collapse
if u can put it in download mode u can download a GB rom and install it and then bootup ur phone and do wat u wanted
kautilyadas said:
well not for me, tried on different computers too. idiotic question: do i require different drivers :/ because i don't know why it wouldn't detect otherwise
Click to expand...
Click to collapse
Try to this Samsung driver pack. see if it helps at all.
http://www.mediafire.com/?ager59qlwy35q50
should also check/change cable and change computer as well.
forest1971 said:
Try to this Samsung driver pack. see if it helps at all.
http://www.mediafire.com/?ager59qlwy35q50
should also check/change cable and change computer as well.
Click to expand...
Click to collapse
thanks to all of you, but i didn't have access to internet at that time, i got a microUSB reader and transfered the file. now i'll backup so such noob stuff doesn't happen again :/
So, I recently used an app (app2sd or link2sd or one of those kinds of apps) that swapped my internal memory with my external memory. It requested me to do a reboot, so I did. After the reboot, the phone just keeps looping through the cyanogenmod boot animation. What I think is that since my SD card doesn't have the booting files that my internal storage has, it doesn't boot (correct me if I'm wrong), since its reading the sd card as if its the internal storage and vice versa for the internal memory. Any way I could fix this? So far all I can really do on my phone is boot into recovery mode and Odin mode. I also tried to flash my SD card with Cyanogenmod, but turns out I don't have the zip for it on my internal memory (now external), and I can't access the internal memory on my computer, only the SD card (internal). Also, I've tried using adb shell, but whenever I try it always comes up with "Error: device not found" so that wont work for me. Kinda assuming I'm outa luck D:
I'm a little confused here if I got this right you used an app to SD app now your external SD is reading as your internal ? What recovery you using cwm?
schuylkillparanormal said:
I'm a little confused here if I got this right you used an app to SD app now your external SD is reading as your internal ? What recovery you using cwm?
Click to expand...
Click to collapse
Yes thats correct; my internal is now reading as my external and vice versa with my external (its reading as internal). And Yes I'm using CWM
phatlaity123 said:
Yes thats correct; my internal is now reading as my external and vice versa with my external (its reading as internal). And Yes I'm using CWM
Click to expand...
Click to collapse
Do an catalog and it will tell you whats causing the bootloop then google it.
schuylkillparanormal said:
Do an catalog and it will tell you whats causing the bootloop then google it.
Click to expand...
Click to collapse
I'm sorry, a catalog? I'm a noob on phones lol
phatlaity123 said:
I'm sorry, a catalog? I'm a noob on phones lol
Click to expand...
Click to collapse
Logcat sorry auto correct replaced it lol. Check this out it well walk you through it.
http://forum.xda-developers.com/showthread.php?p=21802298
schuylkillparanormal said:
Logcat sorry auto correct replaced it lol. Check this out it well walk you through it.
http://forum.xda-developers.com/showthread.php?p=21802298
Click to expand...
Click to collapse
Any code I try to use it just says "device not found" and for my device there are 2 ADB Interface devices in device manager with "SAMSUNG Android Composite ADB Interface". Any way how to recognize me device?
phatlaity123 said:
Any code I try to use it just says "device not found" and for my device there are 2 ADB Interface devices in device manager with "SAMSUNG Android Composite ADB Interface". Any way how to recognize me device?
Click to expand...
Click to collapse
Nope it soft bricked not to worry though. Your going to need an usb jig there like 5 dollars at usbjig.com once you get that reformat your sd card make sure you have usb driver and boot image and nessary files to flash to stock via odin at that point google and youtube is your best friend because i have no experince dealing with odin. The USB jig is going to force you phone into odin so you can load the nessary files to flash back to factory if done properly.
Which version of CWM are you using? If you are on 6x you can go to mounts and storage and then mount USB to copy a ROM to your phone. If you are on 5x you will have to update to 6x with Odin.
Edit: If you can't mount storage but you can get into download mode, you should follow the directions to flash to stock from here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G
meekrawb said:
Which version of CWM are you using? If you are on 6x you can go to mounts and storage and then mount USB to copy a ROM to your phone. If you are on 5x you will have to update to 6x with Odin.
Edit: If you can't mount storage but you can get into download mode, you should follow the directions to flash to stock from here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G
Click to expand...
Click to collapse
The USB ain't being recognized
schuylkillparanormal said:
Nope it soft bricked not to worry though. Your going to need an usb jig there like 5 dollars at usbjig.com once you get that reformat your sd card make sure you have usb driver and boot image and nessary files to flash to stock via odin at that point google and youtube is your best friend because i have no experince dealing with odin. The USB jig is going to force you phone into odin so you can load the nessary files to flash back to factory if done properly.
Click to expand...
Click to collapse
Ok well I'll look into this. Thanks for the info!
Download mode=Odin mode.
If you can already get into Odin by holding volume down and power then you don't need a jig.
meekrawb said:
Download mode=Odin mode.
If you can already get into Odin by holding volume down and power then you don't need a jig.
Click to expand...
Click to collapse
Ok but what is being able to get into Odin mode going to do for me..?
if you can get into recovery flash a new rom. if you can get into download mode restore to stock using odin
smartguy044 said:
if you can get into recovery flash a new rom. if you can get into download mode restore to stock using odin
Click to expand...
Click to collapse
AH. Yea I've just did that and now its working good as new. Thanks!
Hi,
After accidently wipe averything off my phone it will not boot again. I'm still able to go into bootloader mode but I have no access to my sd card by using the usb. Pc recognized my phone but cannot see the sd card. (win7) My phone is s-off but and not rooted anymore. I can still boot into revovery with TWRP. Is there maybe something that i should mout or unmount. I also got a microsd to usb cabel where i put the restore files on a usb stick but that doesn't work. I don't now that to do. I have read a lot about using ruu and stuff but it's not verry clear for me.
It's just that the phone doesn't recognized my SD. When this is ok I think that i just can put a rom into it and install again with the TWRP.
Is there maybe a solution for this ?
Sorry for the bad English
Thanks
wim1975 said:
Hi,
After accidently wipe averything off my phone it will not boot again. I'm still able to go into bootloader mode but I have no access to my sd card by using the usb. Pc recognized my phone but cannot see the sd card. (win7) My phone is s-off but and not rooted anymore. I can still boot into revovery with TWRP. Is there maybe something that i should mout or unmount. I also got a microsd to usb cabel where i put the restore files on a usb stick but that doesn't work. I don't now that to do. I have read a lot about using ruu and stuff but it's not verry clear for me.
It's just that the phone doesn't recognized my SD. When this is ok I think that i just can put a rom into it and install again with the TWRP.
Is there maybe a solution for this ?
Sorry for the bad English
Thanks
Click to expand...
Click to collapse
Yeah, you can use a USB OTG cable. Put a rom into the usb, and using an otg cable, u can flash a rom within TWRP. Alternately, u can "adb sideload" a rom zip to the phone
raghav kapur said:
Yeah, you can use a USB OTG cable. Put a rom into the usb, and using an otg cable, u can flash a rom within TWRP. Alternately, u can "adb sideload" a rom zip to the phone
Click to expand...
Click to collapse
Thanks I will try this later on, do i have to mount anything ?
Just copy your rom as raghav kapur said and then you can flash your rom without any doubts
wim1975 said:
Thanks I will try this later on, do i have to mount anything ?
Click to expand...
Click to collapse
Here's the guide:
http://forum.xda-developers.com/showthread.php?t=2559200
raghav kapur said:
Here's the guide:
http://forum.xda-developers.com/showthread.php?t=2559200
Click to expand...
Click to collapse
Hi just to say that everthing is working fine again. Thanks a lot for your help.
Greetz
Don't forget to hit thanks button bro
Boachti said:
Don't forget to hit thanks button bro
Click to expand...
Click to collapse
Done (a few days ago Thanks again)
[emoji4] [emoji4] [emoji4]
أرسلت من E2003 بإستخدام تاباتلك