Database Develop

DSP Manager on stock JVH

Hello all,
I have tried MIUI latest version but it was a bit buggy so I'm back to stock JVH. I really liked DSP Manager in MIUI and would like to install it on my JVH stock ROM. I have tried to install stand alone .APK opens ok, but it's doing nothing while trying to change settings inside the APK.
Can somebody help me please?
Thank you!

I think, it only works with Stock Music App or MIUI Music App. Try one of those and report back.
mrwadim said:
Hello all,
I have tried MIUI latest version but it was a bit buggy so I'm back to stock JVH. I really liked DSP Manager in MIUI and would like to install it on my JVH stock ROM. I have tried to install stand alone .APK opens ok, but it's doing nothing while trying to change settings inside the APK.
Can somebody help me please?
Thank you!
Click to expand...
Click to collapse

Virtualsk said:
I think, it only works with Stock Music App or MIUI Music App. Try one of those and report back.
Click to expand...
Click to collapse
Is there any working guide for I9000?
Thank you!

I think Gingerbread already has some sort of EQ support, try one of those apps in Market? It may not be exactly DSP Manager of MIUI but you may be able to achieve something similar.

Instructions - Root explorer (Requires root)
copy both the files to your SD Card (DSPmanager.apk and music.apk)
1.Load Root Explorer. Go into System -> apps
2.Scroll down till you see the music player.apk file.
3.Select and hold down until a pop up appears.
4.Select "Rename"". Add .bak to the file, so it reads music player.apk.bak.
5.Select the file again as above, but now select move.
6.Press the back key until you go back to the system root (/) and then go go the SDcard folder.
7.Select Paste. You now have your original player backed up and safe if you wish to revert.
8.Now install the Music.apk.
9.Now install DSPmanager.apk.
View attachment DSPManager.apk
View attachment Music.apk
this guide is for sgs2 however try it,in theory it should work equally!!!!

pelonero111 said:
Instructions - Root explorer (Requires root)
copy both the files to your SD Card (DSPmanager.apk and music.apk)
1.Load Root Explorer. Go into System -> apps
2.Scroll down till you see the music player.apk file.
3.Select and hold down until a pop up appears.
4.Select "Rename"". Add .bak to the file, so it reads music player.apk.bak.
5.Select the file again as above, but now select move.
6.Press the back key until you go back to the system root (/) and then go go the SDcard folder.
7.Select Paste. You now have your original player backed up and safe if you wish to revert.
8.Now install the Music.apk.
9.Now install DSPmanager.apk.
View attachment 600208
View attachment 600209
this guide is for sgs2 however try it,in theory it should work equally!!!!
Click to expand...
Click to collapse
Anyone tried if this works?

Problem installing CM7 google Apps Update.zip

Hi guys , I installed CM7 Rom (from 2.1 JFD) through Rom Manager, it works good, i put update.zip on card, but ddnt put google apps .zip file.
CM7 installed correctly. when i tried to put googleAppsUpdate.zip on card (and removed th CM7Update.zip ) and restarted in recovery from rom manager , i got An Exclamation White triangle Above and Android Man Symbol. and no progress !!!
wht is wrong ?? and how can i Install google Apps update ??

I'm kind of confused here bud, but update.zip is clockwork mod not cm7. By putting the update.zip and applying it via recovery, that would have installed clockwork recovery, and from there you would have needed to install the cm7 zip via recovery to flash cm7. The Google apps zip can be downloaded through your ron manager or via cm7 server, then it needs to he flashed the same way via clockwork recovery (install zip from sdcard).
Sent from my SGH-T959 using Tapatalk

Here comes the fire!!! :-D simple beginner mistake lol
Galaxy S Vibrant CM7.1

google apps....are apps!
you can extract all the apps from the zip, and push them to system/app.
if you cant do that, try mounting system in recovery before you flash....if this was the hd2 forum, you will be hot Cheetos right now...flamed! lol

dapoharoun said:
google apps....are apps!
you can extract all the apps from the zip, and push them to system/app.
if you cant do that, try mounting system in recovery before you flash....if this was the hd2 forum, you will be hot Cheetos right now...flamed! lol
Click to expand...
Click to collapse
seems easy , but how exactly is system/apps ??
when i decompress the .zip i found 2 folders:
-META-INF
-system
each of , contains another files and folders , can you tell exactly where to put in details ?
thx

This belongs in the Q&A, NOT in the Vibrant Android Development

tarreq said:
seems easy , but how exactly is system/apps ??
when i decompress the .zip i found 2 folders:
-META-INF
-system
each of , contains another files and folders , can you tell exactly where to put in details ?
thx
Click to expand...
Click to collapse
First fo all, this is in the wrong forum.
Second of all, I really believe you are probably trying to flash a version of gapps that is not correct for your device.
But either way...
The two compressed folders are
-META-INF
-system
decompress the system folder..maybe put it on your desktop or something. Inside the system folder is a series of different folders. Look for the one that is named "Apps" take that folder and place it on the root of your SDcard. Now, go back onto your phone and use Root explorer to manually move each of the apks from that app folder that you would like...and move them to system>apps. fix the permissions on the apk once you move it so that it has the same permissions as every other apk already in the folder and once you are done moving whichever apps you'd like on your phone and fixing the permissions, reboot your phone.

[Q] How to change my boot animation ?

Hi every one im new to this forum and to advance phone stuff and just yesterday i rooted my Samsung galaxy s 2.3.3 so i got my provider stock rom and the boot and shoutdown animation isucks and i want to change it and i tryd the zip into system/media but it didnt work and so did the cmw method so what can i do ? for the record i didnt use my pc idownloaded it throw the phone and i used root explorer thx in advance

ST3MC said:
Hi every one im new to this forum and to advance phone stuff and just yesterday i rooted my Samsung galaxy s 2.3.3 so i got my provider stock rom and the boot and shoutdown animation isucks and i want to change it and i tryd the zip into system/media but it didnt work and so did the cmw method so what can i do ? for the record i didnt use my pc idownloaded it throw the phone and i used root explorer thx in advance
Click to expand...
Click to collapse
You need to copy the bootanimation.zip to System-media folder.
I used Super Manager to do this.
1. Copy the bootanimation.zip to your phone.
2. Start Super Manager and navigate to system folder. You will get a pop-up asking if you want to mount system as r/w. Select r/w.
3. Navigate to media folder.
4. Paste the bootanimation.zip to the media folder.
5. Reboot and watch your beautiful new bootanimation.
Sent from my GT-I9000 using Tapatalk

ROOT IT !!! i cant stress it enough once you root it turn USB Debugging on in settings>applications and download whatever bootanimation you like in and put it in your SD Card on Removable Disk F Normally bootanimations are in .zip forms so simply power off hold top volume button power button and home to get into CWM and flash as easy as that

Modify SGS3 Photowall Livewall paper to add own pictures

Hi Devs,
I was wondering if there is a way to modify the photowall live wallpaper and add your own pictures, I tried to look for a guide & modified app, however no luck.
Found 1 modified apk with batman pics but that didnt work.
Please let me know if anyone has been able to modify or is working on this.
Regards,
[email protected]

If at beginning of your title you put " (REQUEST) "then you might get better and faster answer.
Sent from my SGH-I897 using xda premium

Steps To Modify SGS3 Photowall Live Wallpaper
Hi All,
I had tried multiple roms and when used the Photowall Live Wallpaper, I could not point it to the photo gallery to use my own pics. The gallery would never open and I had to do with the default pics which came with the SGS3. (Not sure if anyone has faced this issue).
After playing around with the apk files I did find a way to use my own pics in the PhotoWall Live Wallpaper. I hope you would like this.
A: Uploading your pictures in the Photowall.apk file.
1. Select a maximum of 8 pictures that you wish to use in the Photowall and move them to a folder on your desktop.
2. Rename the 8 pictures as follows: g1p1.jpg / g1p2.jpg / g1p3.jpg / g1p4.jpg / g1p5.jpg / g1p6.jpg / g2p1.jpg / g2p2.jpg
3. Extract the Photowall.apk from ICS ROM onto a folder on your desktop. (I used RemICS v1.3, haven’t tried this is on any other ROM).
4. Open the apk file using winrar. (Do not extract, just open)…. Navigate to the PhotoWall.apk\res\raw folder.
5. You should be able to see the files as shown in the screenshot 1.jpg
6. Click on “Add” and navigate to the folder where you have stored the pictures (remember to rename them as mentioned in step 2).
7. Select the files and click “OK”. This will replace the original files in the Photowall.apk.
8. Once this is done, exit/close the apk file opened in winrar.
You can try installing this file directly by copying it to your phone, however that didn’t work on my phone.
B: Uploading your customized Photowall.apk file in your ROM. (Tested on RemICS v1.3).
1.Open the Rom that you wish to flash (I used RemICS UX v1.3) using winrar (do not extract)
2.Navigate to \data\app folder.
3.Click on “Add” and navigate to the folder where you have saved your customized Photowall.apk. (Make sure that the name is “Photowall.apk”).
4.This will replace the original Photowall.apk with your customized file.
5.Exit and save the zip file.
6.Use the new edited Rom and copy it to the root of your “Internal SD” card.
7.Reboot the phone to “Recovery” and flash the new Rom. (I did not lose my data & settings as I did not wipe cache partition or Data/Factory, however this may or may not work for you. To be on a safer side please backup your data and applications. I will not be responsible for any data loss or bricked devices while trying this procedure. Try at your own risk.).
You can watch the video on the link below (sorry for the poor quality)
http://www.youtube.com/watch?v=Yd2VCzvphu8&feature=youtu.be
Special thanks toTeam RemICS for the beautiful Rom.
If you liked my work, please use the thanks meter.
- Disclaimer -
This product/steps is/are free to use at your own risk. I take no
responsibility for any conflict, fault, data loss or damage caused by this procedure.
No warranties, implied or otherwise, are given if you agree to use this product.
No problems were found while testing this on my Samsung Captivate device. your experience may vary.

maqbulsayed said:
B: Uploading your customized Photowall.apk file in your ROM. (Tested on RemICS v1.3).
1.Open the Rom that you wish to flash (I used RemICS UX v1.3) using winrar (do not extract)
2.Navigate to \data\app folder.
3.Click on “Add” and navigate to the folder where you have saved your customized Photowall.apk. (Make sure that the name is “Photowall.apk”).
4.This will replace the original Photowall.apk with your customized file.
5.Exit and save the zip file.
6.Use the new edited Rom and copy it to the root of your “Internal SD” card.
7.Reboot the phone to “Recovery” and flash the new Rom.
Click to expand...
Click to collapse
I think you over complicated the install process by a bit...
Why not just use a file explorer with root permissions and place the new Photowall.apk back to /system/app where it actually belongs, reboot the phone and be done with it? (/system/app is where live wallpapers that come with the phone are located by default, not /data/app)
As you can see here on my GS3, two of the several live wallpapers (phase beam and photo wall) are in /system/app
And these are the proper permissions for the apk

I tried that, but that wont work..... that the reason i mentioned
" You can try installing this file directly by copying it to your phone, however that didn’t work on my phone. "
Unfortunately wht u menitioned didnt work for me...
correct me if I am wrong... did u mention SG3... for SG3, you dont need to modify the photowall.apk, if you go to the wallpaper settings you can select pics from your gallery..

maqbulsayed said:
I tried that, but that wont work..... that the reason i mentioned
" You can try installing this file directly by copying it to your phone, however that didn’t work on my phone. "
Unfortunately wht u menitioned didnt work for me...
correct me if I am wrong... did u mention SG3... for SG3, you dont need to modify the photowall.apk, if you go to the wallpaper settings you can select pics from your gallery..
Click to expand...
Click to collapse
Yes, I understand that on the SG3 you don't need to do this, but on a Captivate, I don't see why you wouldn't be able to place it in /system/app and still have it work.

[CM10][Outdated] .bat Free Spacer TESTED

Thanks to TheWhisp and hims team for JB ROM
Note: Make a backup of curent stable rom
Here is a guide how to quick remove unnecesared apps from /system/app and flash latest Cm10JB with Google Apps
other details to post #2
ok, lets start
1.download latest cm10 nightlly/gapps and put to sdcard (UNPLUG DEVICE FROM USB)
2.go to recovery, wipe all user data/cache/dalvic-cache
3.go to mounts and storage menu and format /system
4.install zip from sdcard (choose rom zip file)
5.reboot device
6.go to settings - development - root access - allow for apps and adb
7.download my attach and unrar to c:/ (c:/ADB_delete_apps/) -> View attachment ADB_delete_apps.rar
8.open adb folder, plug device to usb cable
9.run deleteApps.bat file from c:/ADB_delete_apps/ folder
10.follow instructions
11.reboot to recovery
12.flash gapps
OPTIONAL
if you want you can delete ringtones
1.download this -> View attachment ADB_delete_rings.rar
2.unpack to c:/ (c:/ADB_delete_rings)
3.run mount_as_root.bat file
3.run RingDelete.bat file
NOTE: in system/media/audio will be 1ring, 1notification and 1alarm
enjoy.

deleteApps.bat will remove from /system/app this apps:
LiveWallpapers.apk
CMWallpapers.apk
Development.apk
Email.apk
Exchange2.apk
Galaxy4.apk
HoloSpiralWallpaper.apk
LiveWallpapersPicker.apk
MagicSmokeWallpapers.apk
NoiseField.apk
PhaseBeam.apk
PicoTts.apk
QuickSearchBox.apk
SoundRecorder.apk
SpareParts.apk
Stk.apk
Trebuchet.apk
VideoEditor.apk
and will push to system/app ES File Explorer and HoloLauncher HD free version
DeleteRing.bat file will remove all ringtones/alarms/notifications exclude this:
ringtone: CyanTone.ogg
alarm:Nobelium.ogg
notification:CyanNotification.ogg

Thanks
killar_aka_arabu said:
deleteApps.bat will remove from /system/app this apps:
LiveWallpapers.apk
RomManager.apk
CMWallpapers.apk
Development.apk
Email.apk
Exchange2.apk
Galaxy4.apk
HoloSpiralWallpaper.apk
LiveWallpapersPicker.apk
MagicSmokeWallpapers.apk
Mms.apk
NoiseField.apk
PhaseBeam.apk
PicoTts.apk
QuickSearchBox.apk
RomManager.apk
SoundRecorder.apk
SpareParts.apk
Stk.apk
Trebuchet.apk
VideoEditor.apk
and will push to system/app ES File Explorer and HoloLauncher HD free version
DeleteRing.bat file will remove all ringtones/alarms/notifications exclude this:
ringtone: CyanTone.ogg
alarm:Nobelium.ogg
notification:CyanNotification.ogg
Click to expand...
Click to collapse
Sorry but I'm new to this can you please let me know removing all this will increase system space

read first post, and do all step by step

None
killar_aka_arabu said:
read first post, and do all step by step
Click to expand...
Click to collapse
Some time during an incoming call when you answer the call there isn't any voice, on cancelling the call it didn't cancel and on top bar it keeps displaying a phone icon, click on same just return you back nothing else ..... Click on phone icon to set a new call display an 'unknown call' in progress which I'm not able to disconnect.
During this time if some one again called you up , the caller hears the ring on his set but in real you are not getting any call on your set.
Have to restart the phone to restore the services, after reboot phone icon on top bar removes and you are again able to receive the call.
This happens 2,3 times in 15 calls. First i thought it was an network error but signal strength was good at that time tried on another network face same issue... even reinstall the rom again after clearing cache and all still same issue. Please advise is there any solution?

kenji41 said:
Some time during an incoming call when you answer the call there isn't any voice, on cancelling the call it didn't cancel and on top bar it keeps displaying a phone icon, click on same just return you back nothing else ..... Click on phone icon to set a new call display an 'unknown call' in progress which I'm not able to disconnect.
During this time if some one again called you up , the caller hears the ring on his set but in real you are not getting any call on your set.
Have to restart the phone to restore the services, after reboot phone icon on top bar removes and you are again able to receive the call.
This happens 2,3 times in 15 calls. First i thought it was an network error but signal strength was good at that time tried on another network face same issue... even reinstall the rom again after clearing cache and all still same issue. Please advise is there any solution?
Click to expand...
Click to collapse
you just copyed question from CM10 Dev Thread. please, dont spam this thread.
p.s. you can ask your question in Q&A section

sturedm
killar_aka_arabu said:
you just copyed question from CM10 Dev Thread. please, dont spam this thread.
p.s. you can ask your question in Q&A section
Click to expand...
Click to collapse
pls tell me where is Q&A section i wll delete my older post to avoid spamming pls tell me where it s and i didnt get a proper response so only posted my question here dont mistake me

Updated

Congrats bro.. You have been featured in the xda portal. Check small talk thread for the link.. Good job!
Edit: http://www.xda-developers.com/android/install-cm10-with-google-apps-on-samsung-galaxy-mini/

u r featured in the portal news...congrats

will it work on galaxy fit too??

sure
Sent from my GT-S5570 using XDA

thanks for your work

do you think it will work on a GT-I5500 ?
Do you think it will work on a GT-I5500 ?
The screen resolution might be too small for this.
thanks upfront

Which recovery do I have to use, the stock one or CWM? TheWhisp should include a small installation guide in his thread...

16k said:
Do you think it will work on a GT-I5500 ?
The screen resolution might be too small for this.
thanks upfront
Click to expand...
Click to collapse
yes, it should work.

Simeonico said:
Which recovery do I have to use, the stock one or CWM? TheWhisp should include a small installation guide in his thread...
Click to expand...
Click to collapse
you can use CWM from my signature

s2e and Mini with latest Nightly from The Whisp
Hi
I downloaded S2e and installed but it will not run on the Mini with CyanogenMod 10 ( nightly - 02/09/2012 ~ 5m GMT+3 ). Is it supposed to work with this ROM?
I have partitioned the SD card and I have an ext4 partition.
Sorry for being a pain, just cannot figure it out.
Many thanks
Michael

Mikef1957 said:
Hi
I downloaded S2e and installed but it will not run on the Mini with CyanogenMod 10 ( nightly - 02/09/2012 ~ 5m GMT+3 ). Is it supposed to work with this ROM?
I have partitioned the SD card and I have an ext4 partition.
Sorry for being a pain, just cannot figure it out.
Many thanks
Michael
Click to expand...
Click to collapse
1. Wrong thread
2. yes, this version of s2e support jb rom
3.search thread in App and Themes section
Sent from my GT-S5570 using XDA

error when i launch deleteApps.bat
killar_aka_arabu said:
Thanks to TheWhisp and hims team for JB ROM
Note: Make a backup of curent stable rom
Here is a guide how to quick remove unnecesared apps from /system/app and flash latest Cm10JB with Google Apps
other details to post #2
ok, lets start
1.download latest cm10 nightlly/gapps and put to sdcard (UNPLUG DEVICE FROM USB)
2.go to recovery, wipe all user data/cache/dalvic-cache
3.go to mounts and storage menu and format /system
4.install zip from sdcard (choose rom zip file)
5.reboot device
6.go to settings - development - root access - allow for apps and adb
7.download my attach and unrar to c:/ (c:/ADB_delete_apps/) -> View attachment 1294712
8.open adb folder, plug device to usb cable
9.run deleteApps.bat file from c:/ADB_delete_apps/ folder
10.follow instructions
11.reboot to recovery
12.flash gapps
OPTIONAL
if you want you can delete ringtones
1.download this -> View attachment 1294713
2.unpack to c:/ (c:/ADB_delete_rings)
3.run mount_as_root.bat file
3.run RingDelete.bat file
NOTE: in system/media/audio will be 1ring, 1notification and 1alarm
enjoy.
Click to expand...
Click to collapse
when i launch the bat file it asks me to "Press any key to Continue..."
then error : more than one device and emulator
help
thanks in davance