Heimdall One-Click Total Stock - Captivate Q&A, Help & Troubleshooting

Heimdall One-Click Total Stock - Captivate Q&A, Help & Troubleshooting

Hey everyone,
I was looking at this thread: http://forum.xda-developers.com/showthread.php?t=1266172 .
Does anyone have AT&T Samsung Captivate Total Stock UCKB2 "Rooted Version"? The download link is dead, and I need it to revert back to stock. (stuck on CM7 loading screen after restart)
I understand it's a big file, but if anyone can upload it for me, it would greatly be appreciated. Thanks.

Why not just use a different package? There is only about 100 others to choose from...

I believe this is the only one which worked for me when I initially flashed back to stock. It caters to the new build numbers.

Try the ones found here. They worked for me.
http://forum.xda-developers.com/showthread.php?t=1191094
Sent from my SGH-I897 using XDA App

icedd said:
Hey everyone,
I was looking at this thread: http://forum.xda-developers.com/showthread.php?t=1266172 .
Does anyone have AT&T Samsung Captivate Total Stock UCKB2 "Rooted Version"? The download link is dead, and I need it to revert back to stock. (stuck on CM7 loading screen after restart)
I understand it's a big file, but if anyone can upload it for me, it would greatly be appreciated. Thanks.
Click to expand...
Click to collapse
Flash the unrooted version, then use superoneclick to root.

Here's the rooted version -> LINK

Related

[Q] VZW Tab - Flashed Roto/JMI, have no modem

I have successfully installed the Roto/JMI v2 Rom on my Verizon Galaxy Tab.
It seems to work, but somehow I lost my modem. Where can I find the CSC/Phone firmware to reflash using Heimdall?

golden422 said:
I have successfully installed the Roto/JMI v2 Rom on my Verizon Galaxy Tab.
It seems to work, but somehow I lost my modem. Where can I find the CSC/Phone firmware to reflash using Heimdall?
Click to expand...
Click to collapse
did you roto back first before anything?

Here is the modem.bin file extracted from my Verizon GTab. It worked to fix my modem when I mistakenly placed the zImage file in modem slot for Heimdall.
Used 7z to compress. Just uncompress and use Heimdall to update.
Let me know if this works for you...

when I use that modem.bin, heimdall with go to install it then sit at 100% but doesn't actually install it. It locks up, when I restart I get the phone exclamation mark computer error picture.

kgelso said:
when I use that modem.bin, heimdall with go to install it then sit at 100% but doesn't actually install it. It locks up, when I restart I get the phone exclamation mark computer error picture.
Click to expand...
Click to collapse
Hmm, that shouldn't happen. How long did you wait? Heimdall will wait quite some time (sometimes 5 minutes or more) for the phone to respond. If the phone doesn't respond in this time then you should see an error message.
Anyway if the modem flash did actually make it to 100% then you should be able to use the command line tool directly to just get rid of the phone exclamation screen:
heimdall close-pc-screen
Click to expand...
Click to collapse

Thanks for your response. I ended up re-flashing the Stock Firmware, and it worked.
I appreciate your help.

golden422 said:
Thanks for your response. I ended up re-flashing the Stock Firmware, and it worked.
I appreciate your help.
Click to expand...
Click to collapse
Golden422 - How did you do this, what files did you use?
I have the exact same problem you were having, no luck for me.
I still stuck on airplane mode with no GPS.
If it means anything, under "About device" I have unknown Baseband and Hardware versions.
Thanks in advance.

Needed modem for Verizon Galaxy Tab
Please, help me found modem for Verizon Galaxy Tab (I800).
Yesterday I'm flashed over Odin Sprint modem (EA24), and now my Verizon Galaxy Tab dont work with mobile network.
May be anyone have some ideas for fix it another way?
P.S. Modem that attached in post #3 not fix my problem

licbez said:
Please, help me found modem for Verizon Galaxy Tab (I800).
Yesterday I'm flashed over Odin Sprint modem (EA24), and now my Verizon Galaxy Tab dont work with mobile network.
May be anyone have some ideas for fix it another way?
P.S. Modem that attached in post #3 not fix my problem
Click to expand...
Click to collapse
Same. I have no 3G network. I am also stuck at the 100% loading screen. Help would be awesome.

You guys should check out the Gingerbread leak for VZW that Oldmacnut posted in the development section. It's a full stock GB rom. Otherwise I'd recommend his Better Than Life rom. The stock GB should get you back up and running, then you can figure out what you want to do from there. There's also a stock Froyo rom floating around here for the VZW tabs as well. The Sprint rom breaks the VZW tab's 3g, known issue. You always want to try and get the stock rom for your specific tab.

The Sprint install breaks my modem? How unfortunate. Anyway how do I put a band-aid on it to fix it? Lol
Hope I don't have to send it back to get it fixed...
Sent from my SCH-I800 using XDA App

pvtjoker42 said:
You guys should check out the Gingerbread leak for VZW that Oldmacnut posted in the development section. It's a full stock GB rom. Otherwise I'd recommend his Better Than Life rom. The stock GB should get you back up and running, then you can figure out what you want to do from there. There's also a stock Froyo rom floating around here for the VZW tabs as well. The Sprint rom breaks the VZW tab's 3g, known issue. You always want to try and get the stock rom for your specific tab.
Click to expand...
Click to collapse
Oldmacnut is my hero! Love the GB release too.

[Q] Can't Go Back To Stock!

First I have a Captivate 1007.
Very easy to get into Download Mode so I know the phone isn't bricked.
I was running a version of Serendipity Rom. I wanted to try something different.
So I used what I always use the ODin3 One-Click Stock back to Eclair.
I get nothing but a boot cycle showing the AT&T screen.
Must I go to Stock Froyo now?
Would appreciate some guidance as I'm stuck after a few hours of searching!

Have you tried to flash odin again
CM7

Frawgg said:
First I have a Captivate 1007.
Very easy to get into Download Mode so I know the phone isn't bricked.
I was running a version of Serendipity Rom. I wanted to try something different.
So I used what I always use the ODin3 One-Click Stock back to Eclair.
I get nothing but a boot cycle showing the AT&T screen.
Must I go to Stock Froyo now?
Would appreciate some guidance as I'm stuck after a few hours of searching!
Click to expand...
Click to collapse
have read someone something the same what only works with him is flashing the leaked froyo. you may flash back to stock eclair after everything is working.

The leaked Froyo from Eugene?
I have that one I was just hesitant to flash it.
There is no .PIT file with it though. Is that ok?
EDIT:
Just tried with Odin3 1.7 got Eugene_JK2_Froyo.tar (2).md5 is invalid.
Going to try this one I897UCJI6-OCD-REV02-Low-designgears.exe

Frawgg said:
The leaked Froyo from Eugene?
I have that one I was just hesitant to flash it.
There is no .PIT file with it though. Is that ok?
EDIT:
Just tried with Odin3 1.7 got Eugene_JK2_Froyo.tar (2).md5 is invalid.
Going to try this one I897UCJI6-OCD-REV02-Low-designgears.exe
Click to expand...
Click to collapse
the designgears revo 2

mcord11758 said:
Have you tried to flash odin again
CM7
Click to expand...
Click to collapse
I have 1007 build, I would have to agree with ^^this^^.
Something might of happened in the flash. Try it again.

Use these specifically.
2.1 - http://www.megaupload.com/?d=SBSMALFJ
2.2 - http://www.megaupload.com/?d=QL6NX702

Working now after flashing with I897UCJI6-OCD-REV02-Low-designgears_1_.exe
What do you guys recommend flashing now back to original Eclair stock or staying?

Really up to you at this point. I don't bother with stock (original) firmware as they are bloated and whatnot.

Indeed. Going to try something with good battery life now!
Thank you for all the help fellas!
EDIT: Also I can't go back to 2.1 Stock. Only 2.2 Stock!

[Q] Bell GT-i9000M Stock to CM7

Hello everyone. I'm usually pretty good at finding what I need on the net, but recently that has changed. I have been trying to get CM7 on my SGS with no luck. I have followed the Wiki (see link below) with little success, as well as the second link. Those instructions gave me a boot loop using talon kernel.
What i'm looking for is someone to help me out based on what my phone is already running.
Model Number GT-I9000M
Firmware Version 2.3.3
Baseband Version I9000UGKG3
Kernel Version 2.6.35.7-I9000UGKG3
[email protected]#2
BuildNumber GINGERBREAD.GKG3
I'm comfortable with ODIN (Used plenty of times to get phone back from the dead a couple of times.)
I've gone through the forums and google as well as youtube. It seems they are always on a custom kernel or firmware before going to CM7, so somethings don't apply.
I'm under the impression that my version does not support CWM recovery and that's why using ROM manager fails with a e-signature error and that changing the kernel can change that.
I know there are some really smart people in here that are already rolling with CM7 I could really use their help. File links that work, and are appropriate for my build and maybe an updated guide for the times.
If you can help me out; thank you so much! If not, I understand people are busy.
Cheers
Jay
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
http://forum.xda-developers.com/showthread.php?t=1101534

No I don't. The only recovery i have seen is the factory default.
Sent from my GT-I9000M using XDA App

Same problem here. You can't install CWR with kg3 firmware
Can someone let us know a kernel with CWR that can be flashed to the I9000M?
I've tried to flash a couple of kernels but I just get a bootloop.
Sent from my GT-I9000M using XDA Premium App

Getting into recovery. As i said it goes to stock recovery (3e).
Sent from my GT-I9000M using XDA App

jayallen said:
Getting into recovery. As i said it goes to stock recovery (3e).
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Heimdall finishes without errors?

Apparently. That guide doesnt really help because i am not on 2.2. Im on 2.3
Sent from my GT-I9000M using XDA App

Hard to believe nobody can help me out. Developers but not suporters.
Sent from my GT-I9000M using XDA App

Just flash to JVT, root with Chainfire's kernal, and install CM7 with CWM. None of the developers bother with making stuff for UGKG3 since not a lot of SGS ship with it.

I think I remember something about stock firmware and bootloaders.
Download a rom that has 3 files + boot loader. (I think Ramad has some JVT rom that will work)
Flash with odin, click update bootloader. If the rom isn't prerooted or if it doesn't come with CWM then flash a kernal with odin that supports it.
Then you should be able to follow the rest of the steps.

dannyphones said:
I think I remember something about stock firmware and bootloaders.
Download a rom that has 3 files + boot loader. (I think Ramad has some JVT rom that will work)
Flash with odin, click update bootloader. If the rom isn't prerooted or if it doesn't come with CWM then flash a kernal with odin that supports it.
Then you should be able to follow the rest of the steps.
Click to expand...
Click to collapse
This doesn't apply. Your bootloaders are fine, and you're doing nothing but taking a risk by flashing them for no reason.
adslee said:
Just flash to JVT, root with Chainfire's kernal, and install CM7 with CWM. None of the developers bother with making stuff for UGKG3 since not a lot of SGS ship with it.
Click to expand...
Click to collapse
Look here. This guy knows what he's talking about.
I've never run into this problem, even though I have an i9000m—but that's probably because when I got my phone, we were still on 2.2. If KG3 is giving you troubles, the simplest solution would be to flash a different stock firmware, and then simply proceed from there. Same thing as the above user posted.
Hope it helps! And sometimes it takes time before the right person stumbles onto your thread. Paitence is a virtue.

jayallen said:
Getting into recovery. As i said it goes to stock recovery (3e).
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
You would need to flash a full 3 part ROM via Odin. XXJVT should do the job.
Or send me a PM and I can help.
Sent from my GT-I9000 using XDA App

JVT is easy to find thanks to samfirmware. I tried searching Chainfires Kernel got alot of hits but no direct link. Is there a certain version i should be using?
Sent from my GT-I9000M using XDA App

upichie said:
This doesn't apply. Your bootloaders are fine, and you're doing nothing but taking a risk by flashing them for no reason.
Look here. This guy knows what he's talking about.
I've never run into this problem, even though I have an i9000m—but that's probably because when I got my phone, we were still on 2.2. If KG3 is giving you troubles, the simplest solution would be to flash a different stock firmware, and then simply proceed from there. Same thing as the above user posted.
Hope it helps! And sometimes it takes time before the right person stumbles onto your thread. Paitence is a virtue.
Click to expand...
Click to collapse
I absolutely i agree with you on the patience is a virtue statement. I was just beyond frustrated. I apologize if i offended anyone.Thanks for putting me in my place.
Cheers
Sent from my GT-I9000M using XDA App

I will help you. Check your PM.
Sent from my HP Touchpad using Tapatalk

Hi,
I have the same problem... but no one seem to have mentioned any solutions on this thread
i followed step-by-step from the wiki, i did "heimdall flash --kernel zImage" and then the device automatically rebooted... and i am also stuck in this boot loop that goes nowhere...
any help?

Here follow the instructions I gave this guy earlier today. This will get your running on JVT with Kg3 modem and root on your I9000M....from there your can flash cm7 through cwm.
http://forum.xda-developers.com/showthread.php?t=1375971

vanisleryan said:
This will get your running on JVT with Kg3 modem and root on your I9000M....from there your can flash cm7 through cwm.
http://forum.xda-developers.com/showthread.php?t=1375971
Click to expand...
Click to collapse
First of all, thanks again for the link ... i got the first of your advice working properly. I'm running JVT with KG3 modem....
however, for some odd reason I can't flash CM7 through CWM. I've tried the stable and nightly versions and each time I flash, I get the to point where it saids "install package" ... and then it just goes into this infinite loop where I see the standard SDS logo screen, then I see the CM7 SDS logo screen... then i see a bunch of commands that the flash is trying to run, but its too fast and I can't see what its trying to do...
either way, it just loops over and over again... and i gotta use ODIN and flash it again, but still no way to run CM7
any suggestions?

jayallen said:
Hello everyone. I'm usually pretty good at finding what I need on the net, but recently that has changed. I have been trying to get CM7 on my SGS with no luck. I have followed the Wiki (see link below) with little success, as well as the second link. Those instructions gave me a boot loop using talon kernel.
What i'm looking for is someone to help me out based on what my phone is already running.
Model Number GT-I9000M
Firmware Version 2.3.3
Baseband Version I9000UGKG3
Kernel Version 2.6.35.7-I9000UGKG3
[email protected]#2
BuildNumber GINGERBREAD.GKG3
I'm comfortable with ODIN (Used plenty of times to get phone back from the dead a couple of times.)
I've gone through the forums and google as well as youtube. It seems they are always on a custom kernel or firmware before going to CM7, so somethings don't apply.
I'm under the impression that my version does not support CWM recovery and that's why using ROM manager fails with a e-signature error and that changing the kernel can change that.
I know there are some really smart people in here that are already rolling with CM7 I could really use their help. File links that work, and are appropriate for my build and maybe an updated guide for the times.
If you can help me out; thank you so much! If not, I understand people are busy.
Cheers
Jay
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
http://forum.xda-developers.com/showthread.php?t=1101534
Click to expand...
Click to collapse
Hi jayallen,
I would like to thank you in advance for looking into this for me. I also want to apologize in advance for I think this would have been asked quite sometimes but unfortunately I am not able to find the right firmware. My phone right now is stuck at the samsung logo screen in the start. It is samsung galaxy s and the provider is Bell Canada. It does go into Downloading mode and I have tried many different .pit, pda, modems, csc files but none have worked. I am sure my phone is I9000M and on the latest version of Android (gingerbread). The phone info I think is very similar to the one below:
Model number
GT-I9000M
Firmware version
2.3.3
Baseband Version:
I9000UGKG3
Kernel version
2.6.35.7-I9000UGKG3
[email protected] #2
Build number
GINGERBREAD.GKG3
Can you please, paste the links from where I can get the Modem file and the firmware (PDA, CSC, PIT) which will work with Bell network provider. I think I know how to put it on the device. Any help will be greatly appreciated in regards.
Thanks.
Umar

[Q] P-1000R Black Screen Brick

hello all,
so first off im a idiot. i bought this tablet yesterday for a very good price. worked fine, came with stock 2.2.
so i saw ICS Beta is available. i downloaded it, (After Rooting and CWM) went into CWM, flashed it, did the .ko and the gapps. tablet would not boot. so i saw the guide for unbricking. downloaded the latest 2.3.3 stock available at samfirmware.com, flashed it, and now have a black screen. i can see the hard buttons light up, and i am able to access download mode, but no yellow droid.
i JUST tried CF-Root for GB, and i can hear it booting now.
can anyone tell me if i just bought myself a 200 dollar paperweight because im a complete dumbass?
many many many thanks!

try to download this file
http://hotfile.com/dl/146572150/5fb9a3c/GB-Stock-Safe-v5.zip.html
and than follow the overcome guide ... see from "The installation" in the second half of the page
http://www.teamovercome.net/p1000/?page_id=17

Worked like a charm. I installed stock gb, and gunna finish the overcome install tonight
Sent from my GT-P1000 using XDA App

Try to download the gb stock from team.overcome.net.
With this stock gb you have a really god base for the ics-rom!!!i had the same probs but now all is ok!!!!!
Greetings......

joeyxl said:
Worked like a charm. I installed stock gb, and gunna finish the overcome install tonight
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
well done

i have same problem blank screen and touch screen not function. can these step work on p1000n

cikoshel said:
i have same problem blank screen and touch screen not function. can these step work on p1000n
Click to expand...
Click to collapse
Absolutely... NOT!!
Follow Priyana's suggestion on your other post on the other thread:
http://forum.xda-developers.com/showpost.php?p=26535434&postcount=9
But if you must (prefer) to flash the GB-stock-safe above,
make sure that you flash the correct modem and kernel/
Here is a list of modems, select the one for P1000N:
http://forum.xda-developers.com/showthread.php?t=1069727
Also, list of kernel that you should be using for P-1000 N/L:
http://code.google.com/u/humberos/
HumberOS's original thread:
http://forum.xda-developers.com/showthread.php?t=974408

[Galaxy S GT-i9000] Rooting attempt failed, need help

Hi all,
I've tried searching the forums but unfortunately my search did not turn up anything that specifically addressed how to tackle my problem. I'm generally quite bad with computers/phones/etc., and unfortunately my first attempt at rooting my phone didn't work out. My husband isn't good with phones either. It got stuck in a boot loop and I had to flash a factory firmware to recover the use of my phone, which took me a few hours to understand and perform. (All the data however was wiped, but thankfully I had backed my data up beforehand).
I am still interested in rooting my device, but am now afraid that I will screw it up again. I was hoping someone could please help me out as I do not want to permanently damage or lose all my phone's data again. Here are the details of my phone, please let me know what I need in order to root it. I will provide any other information necessary.
Model: GT-I9000
Firmware version: 2.2.1
Baseband version: I9000ZSJPG
Kernel version: 2.6.32.9
[email protected] #5
Build number: FROYO.ZSJPG
Thank you for any help provided. I would really appreciate a step by step guide if possible, because I'm so inept at dealing with these matters, and unfortunately my husband isn't much help either. Thanks all.

U need to update to the latest versoin available in your country...
If it is 2.3.6 then u can root it using odin3_v1.0
U can find a full proof guide for 2.3.6..just google it...
If u dont have 2.3.6 then also google it..download and flash it...and then root it...
Cheers
Sent from my GT-I9000 using xda app-developers app

tchindalia said:
U need to update to the latest versoin available in your country...
If it is 2.3.6 then u can root it using odin3_v1.0
U can find a full proof guide for 2.3.6..just google it...
If u dont have 2.3.6 then also google it..download and flash it...and then root it...
Cheers
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Thank you for your reply. I tried flashing to 2.3.6 using odin3v_1.7 but I got the same problem with a boot loop again! I have flashed back to the factory firmware again, and am back at square one. I'm really not sure what I'm doing wrong. Thank you for your reply though.

Excalipoors said:
I'm really not sure what I'm doing wrong. Thank you for your reply though.
Click to expand...
Click to collapse
If you are still on 2.2 .1 just connect it to KIES http://www.4shared.com/file/rcHB94q3/Kies_23212064_10_1.html and let it update it for you..IF it works without any problems.
or else you may have failed to Format your SD card and factory reset before flashing using odin and also do a wipe after flashing in recovery mode.
or you may have ticked repartition in Odin? that cause the boot loop

Excalipoors said:
Hi,
Thank you for your reply. I tried flashing to 2.3.6 using odin3v_1.7 but I got the same problem with a boot loop again! I have flashed back to the factory firmware again, and am back at square one. I'm really not sure what I'm doing wrong. Thank you for your reply though.
Click to expand...
Click to collapse
hey
try using odin3_v1.0 and not v1.7...thats what i preffer...
plus you can go through the guide available here link:
1.To ROOT
http://www.androidauthority.com/root-galaxy-s-gt-i9000-android-2-3-6-xxjvu-48441/
2.Update to 2.3.6
http://www.androidauthority.com/and...d-value-pack-samsung-galaxy-s-gt-i9000-44229/
cheers

Working trying, very simple steps to:
To Move to GB [Retaining the warranty]: https://www.fixmystuff.in/FMS_Forum/threads/samsung-galaxy-s-gt-i9000-flashing-to-original-rom.46/
To Root: https://www.fixmystuff.in/FMS_Forum...-i9000-rooting-gt-i9000-2-3-3-india-ddjv9.47/
To Install ICS [4.0.4]: https://www.fixmystuff.in/FMS_Forum...wich-4-0-4-in-samsung-galaxy-s-g-t-i9000.125/

Thank you very much everyone! I really appreciate all the suggestions, will try them all out later tonight and let you guys know how it worked out.
You guys are awesome. =)

If you want to root GB, any version, use superoneclick. Works great, but you wont have a custom recovery that can flash update.zips. Or you could just flash a rooted kernel via odin so you get cwm and other features such as bln, cpu scaling etc. Also if you want to go to ics, flash an ics kernel, boot into recovery flash any ics rom and your good to go.
Good Luck!

Hi,
Personally I flash a Darkyrom GB ROM (you can find it on his website). Best part about it is you dont need to be rooted to flash his ROM. Try searching for 10.2 RE JVU on his website. All you need is a .tar file and flash it via odin. I think TotallydubbeHD has a video tutorial on youtube as well.
Trust me, its safe. I have flashed it countless of times

Thank you so much everyone! It finally worked! Everyone has been such a great help, thank you so much everyone. <3

Database Develop

welcome