Related
I apologize if this is the wrong place to post this. Can someone explain the basics of what PDA/PHONE/CSC are? Right now by dialing *#*#1234#*#* I get:
PDA: i897UCJF6
PHONE: i897UCJH3
CSC: i897ATTJF6
I flashed the JH3 ROM from JF6 using the PDA option, was that correct? Also, can someone explain the proper way to flash with Odin? Thanks in advance.
I realize development isnt the best area for this, but i would be interested in an ‘idiots guide’ to odin, etc. As well.
Ive moded android phones before but it hasn’t been with odin
+1 the stickied Odin thread is not very detailed on what you're actually doing when you use the program.
+1 This would be nice
+10000
I have flashed WM thousands of times...android is a whole different monster and ODIN seems like such a shoddy program...no one ever puts a tutorial in their rom threads and I end up spending hours reading just to make sure I have everything set...
And am I the only one that has to run odin liek 30 times before it actually takes? Even the 1 click restore odin takes me several times pulling the battery for it to even start loading...
I hate to bump this, but could someone at least explain what PDA/PHONE/CSC are?
damis648 said:
I apologize if this is the wrong place to post this. Can someone explain the basics of what PDA/PHONE/CSC are? Right now by dialing *#*#1234#*#* I get:
PDA: i897UCJF6
PHONE: i897UCJH3
CSC: i897ATTJF6
I flashed the JH3 ROM from JF6 using the PDA option, was that correct? Also, can someone explain the proper way to flash with Odin? Thanks in advance.
Click to expand...
Click to collapse
If you clicked PDA in odin and pointed to the right ucjh3, you should be on jhs pda AND modem, i think, though i don't believe there's much difference. As for explanation, see below....
bdbsubscribe said:
I realize development isnt the best area for this, but i would be interested in an ‘idiots guide’ to odin, etc. As well.
Ive moded android phones before but it hasn’t been with odin
Click to expand...
Click to collapse
See below...
imb951 said:
+1 the stickied Odin thread is not very detailed on what you're actually doing when you use the program.
Click to expand...
Click to collapse
See below...
tommyb227 said:
+1 This would be nice
Click to expand...
Click to collapse
votum said:
+10000
I have flashed WM thousands of times...android is a whole different monster and ODIN seems like such a shoddy program...no one ever puts a tutorial in their rom threads and I end up spending hours reading just to make sure I have everything set...
And am I the only one that has to run odin liek 30 times before it actually takes? Even the 1 click restore odin takes me several times pulling the battery for it to even start loading...
Click to expand...
Click to collapse
keep going down.....
damis648 said:
I hate to bump this, but could someone at least explain what PDA/PHONE/CSC are?
Click to expand...
Click to collapse
Ok, I'll try to explain:
Odin - PDA=Kernel - The brain or core
- Phone:= modem - self explanatory
- CSC = Carrier specific options - usually ignore this
Most of the time, the package you download is all-in-one, which would go in the PDA box. It basically "wipes" the existing system (not data,like your music and stuff) and installs whatever you tell it to. In other words, stock is UCJF6. The "leaked" newer firmwares are jh2, jh3 and jh7. They are complete files. To upgrade to the jh3 for instance, you would download it, unzip the zip so that it was now showing as a .tar, and point odin PDA to it. Then connect phone in d/l mode and click start in odin when it says added. It will reprogram the firmware and reboot, at which time you close odin and disconnect cable. You have just flashed!
Does this have to done while flashing or is it possible to change afterwards?
If so how do you change it from KOR?
Amongst many searches .
http://forum.xda-developers.com/showthread.php?t=787163
Plenty more via search button .
jje
Shocky2 said:
Does this have to done while flashing or is it possible to change afterwards?
If so how do you change it from KOR?
Click to expand...
Click to collapse
What JJE wrote you. Just to add. If you are on a ROM with NEE, XEE (the latest GB) AND you have KOR and you cant change with that link. Full reflash needed I guess.
Try the link JJE wrote you. If it works and it should. Good for you
If no, full ROM reflash via odin with everything is needed. (you can backup your data before and restore, so it wont take long).
PAGOT said:
What JJE wrote you. Just to add. If you are on a ROM with NEE, XEE (the latest GB) AND you have KOR and you cant change with that link. Full reflash needed I guess.
Try the link JJE wrote you. If it works and it should. Good for you
If no, full ROM reflash via odin with everything is needed. (you can backup your data before and restore, so it wont take long).
Click to expand...
Click to collapse
Sorry to be a noob, I usually only flash the pdas.
How do I reset the CSC when flashing with odin ? Just downloaded JS7 from Samfirmware which comes with XEE CSC, can I just replace that with a XEU CSC file? if so where do I get them?
The file in the link provided comes in a zip file and a completely different size, can I rename that to tar or tar.MD5 and just flash it?
Bump, sorry need a quick answer to this...
Also, the file said XEE but is actually NEE now, odd.
EDIT: Nevermind, it's really simple to change, overly complicated guides didn't really help.
Shocky2 said:
Bump, sorry need a quick answer to this...
Also, the file said XEE but is actually NEE now, odd.
EDIT: Nevermind, it's really simple to change, overly complicated guides didn't really help.
Click to expand...
Click to collapse
Ah sorry for the late reply. I think nitrality app in the market can make it easy too (on XEU from JVO now )
Easiest.method 1-*#06# wright number down carefully now *#272* your iemi # that will give csc selection choose ie xeu for uk and press install will reboot and wipe phone but works
Sent from my GT-I9000 using XDA App
Hello xda developers
I am wondering if someone can answer a few questions i have about rooting my samsung note?
I'm in Australia and just got my note with vodafone on Saturday. I have been doing some searching in the dev section and I haven't found my kernel version (2.6.35.7-N7000BDULB3-CL977082) to download from dr.ketan I have also searched for it on sammobile.com with no luck also.
So from the above statement does anyone know where i can get a copy of it from or know how i can backup mine from my phone atm?
I have found a root solution however It is for the GT-N7000 model which is at rootgalaxynote.com/galaxy-note-root/how-to-root-galaxy-note-gt-n7000-method-2odinheimdall
If I followed this above method would I end up bricking the phone as the phone version are different? I found nothing on a search when comparing the two
Sorry for an the essay of a post too.
Looks like you're the only guy in the whole wide world with the exotic N7000BDULB3 GB, mate.
https://www.google.com/search?client=opera&rls=en&q=N7000BDULB3&sourceid=opera&ie=utf-8&oe=utf-8
Anyway, you can always flash and root and older Rom, then upgrade to whatever you want whilst keeping your root. Here's a little guide to downgrading and rooting I wrote some time ago, hope it helps.
You'll have a rooted KK9 rom after you're done. Then you can download any new GB version (LC1 is the latest) from here and flash it with Mobile Odin, with Everroot and Inject Superuser options ticked. That will keep your root.
Good luck.
chasmodo said:
Looks like you're the only guy in the whole wide world with the exotic N7000BDULB3 GB, mate.
https://www.google.com/search?client=opera&rls=en&q=N7000BDULB3&sourceid=opera&ie=utf-8&oe=utf-8
Anyway, you can always flash and root and older Rom, then upgrade to whatever you want whilst keeping your root. Here's a little guide to downgrading and rooting I wrote some time ago, hope it helps.
You'll have a rooted KK9 rom after you're done. Then you can download any new GB version (LC1 is the latest) from here and flash it with Mobile Odin, with Everroot and Inject Superuser options ticked. That will keep your root.
Good luck.
Click to expand...
Click to collapse
Thanks for your help I will try it as soon as I get some more free time.
I have read your post y'day, but have not replied b'coz, i was waiting for input.
As you have describe method is not safe, It will give you raise flash counter
here is review of one user from thread you have mentioned.
raj says:
March 26, 2012 at 9:42 pm
Thanks so much, and your posts are one of the easiest to follow and gives a great head start for noobs! Great Job really!
I used this method and now I see a yellow triangle.
1. Will this yellow triangle during boot up, disappear if I follow your unroot method?
2. Will my phone can be updated to ICS once Samsung officially provides upgrade to ICS for Galaxy Note?
3. I tried SetCPU, the phone became very hot, when I over clocked and it just hang. I brought it back to normal.
4. What are all the other useful, important things we can do after root, other than installing Titanium Backup etc.
Click to expand...
Click to collapse
So just follow what chasmodo have advised you.
dr.ketan said:
I have read your post y'day, but have not replied b'coz, i was waiting for input.
As you have describe method is not safe, It will give you raise flash counter
here is review of one user from thread you have mentioned.
So just follow what chasmodo have advised you.
Click to expand...
Click to collapse
Thanks for all the input really appreciated, will let ya know how i go on the weekend when i have some time to do it
chasmodo said:
Looks like you're the only guy in the whole wide world with the exotic N7000BDULB3 GB, mate.
https://www.google.com/search?client=opera&rls=en&q=N7000BDULB3&sourceid=opera&ie=utf-8&oe=utf-8
Anyway, you can always flash and root and older Rom, then upgrade to whatever you want whilst keeping your root. Here's a little guide to downgrading and rooting I wrote some time ago, hope it helps.
You'll have a rooted KK9 rom after you're done. Then you can download any new GB version (LC1 is the latest) from here and flash it with Mobile Odin, with Everroot and Inject Superuser options ticked. That will keep your root.
Good luck.
Click to expand...
Click to collapse
This might be a stupid question chasmodo so bare with me.
With the KKA firmware when extracted I get the 2 files like you said the .tar.md5 and the dll file.
In odin do i just select the .tar.md5 file under the pda option? or do i have to put the dll file in an option as well.
mattybxda said:
In odin do i just select the .tar.md5 file under the pda option? or do i have to put the dll file in an option as well.
Click to expand...
Click to collapse
Just load .tar.md5 in PDA and you're good to go.
chasmodo said:
Just load .tar.md5 in PDA and you're good to go.
Click to expand...
Click to collapse
Just tried it and it FAILED please help?
mattybxda said:
Just tried it and it FAILED please help?
Click to expand...
Click to collapse
Ok so Im trying to flash to the new UK firmware now and see if it loads up if it does i will try replace the kernel to get root that way and report back.
mattybxda said:
Ok so Im trying to flash to the new UK firmware now and see if it loads up if it does i will try replace the kernel to get root that way and report back.
Click to expand...
Click to collapse
Didnt work guys , any ideas on what i can do now.
dr.ketan said:
I have read your post y'day, but have not replied b'coz, i was waiting for input.
As you have describe method is not safe, It will give you raise flash counter
here is review of one user from thread you have mentioned.
So just follow what chasmodo have advised you.
Click to expand...
Click to collapse
Hi dr ketan
Have you got any advice for me im stuck atm, my downgrade didnt work :'( it fails at the kernel part is there away around this?
mattybxda said:
Hi dr ketan
Have you got any advice for me im stuck atm, my downgrade didnt work :'( it fails at the kernel part is there away around this?
Click to expand...
Click to collapse
Do you have Sammy drivers installed on your PC? This is important. From Dr Ketan's guide:
"Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly."
chasmodo said:
Do you have Sammy drivers installed on your PC? This is important. From Dr Ketan's guide:
"Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly."
Click to expand...
Click to collapse
Yeh i have kies on the computer, all was working when i was using kies before.
I
'm tried a different firmware version now so once it downloads i hope it works fingers crossed anyways. If that doesnt any more ideas?
mattybxda said:
Yeh i have kies on the computer, all was working when i was using kies before.
I
'm tried a different firmware version now so once it downloads i hope it works fingers crossed anyways. If that doesnt any more ideas?
Click to expand...
Click to collapse
Yeah...try a different PC Odin version if it fails again.
chasmodo said:
Yeah...try a different PC Odin version if it fails again.
Click to expand...
Click to collapse
Thanks I will try that now I think i am also going to try uninstalling Kies then reinstalling it just as a per-caution. Will let ya know how i go.
mattybxda said:
Thanks I will try that now I think i am also going to try uninstalling Kies then reinstalling it just as a per-caution. Will let ya know how i go.
Click to expand...
Click to collapse
Also make sure that Kies is not running when you are PC Odining (ctrl+alt+del+end process).
chasmodo said:
Also make sure that Kies is not running when you are PC Odining (ctrl+alt+del+end process).
Click to expand...
Click to collapse
Thanks for the tip before about the process seemed to get further now.
Problem now it seems to be getting stuck at setup connection in odin?
the set that seems to be stuck is the setupconnection... should i just close odin and re-try?
mattybxda said:
Thanks for the tip before about the process seemed to get further now.
Problem now it seems to be getting stuck at setup connection in odin?
the set that seems to be stuck is the setupconnection... should i just close odin and re-try?
Click to expand...
Click to collapse
Did you start Odin first, then plug your Note into USB slot? Does Odin show the yellow field with the COM number in it?
chasmodo said:
Did you start Odin first, then plug your Note into USB slot? Does Odin show the yellow field with the COM number in it?
Click to expand...
Click to collapse
I have got the yellow com box wich on my computer says com4.
using odin v1.87 instead odin 1.85 like before.
using the firmware like u suggested to downgrade too as well.
seem to fail when it goes to boot.ini and the kernel section just fails there?
Think I should try flash a kernel or something?
mattybxda said:
I have got the yellow com box wich on my computer says com4.
using odin v1.87 instead odin 1.85 like before.
using the firmware like u suggested to downgrade too as well.
seem to fail when it goes to boot.ini and the kernel section just fails there?
Think I should try flash a kernel or something?
Click to expand...
Click to collapse
Don't know what else to suggest at this point. I'd leave it as it is and wait for Dr. Ketan to bail you out.
@Dr. Ketan:
Mum, help us, we're stuck here!
I hope some one can help. I have never seen anything like this. I have an 8.9 GT-P7310 and its acting very strange. I have tried to Odin anything I can from stock ICS to custom recovery to stock honeycomb and stock recovery. Everything, I repeat everything fails. It looks like it will go and fails everytime. In this case I would look at it as a brick with the firmware upgrade failure message but no. All I have to do is boot it into recovery reset and it turns on. I just cant do anything :crying: Also the tab flickers red whenever I make a selection but I am out of ideas here..
I have a new Sam cable and tried all Usb ports
Make sure to turn off all the developer options. Sounds like you have USB debugging and 'Screen Flash' turned on ... at least.
boscorama said:
Make sure to turn off all the developer options. Sounds like you have USB debugging and 'Screen Flash' turned on ... at least.
Click to expand...
Click to collapse
Thanks for the quick reply.. Ill check it right now and report back
Edit: Odin still fails
I feel like it has a corrupted bootloader or so,
how to circumvent this?
well maybe if you use the pit file to repartition the tablet then install a boot loader from an old and complete stock honeycomb would make a difference.
you can check sammobile for a stock complete honey comb and check additional downloads for a PDF to describe how to flash using ODIN and another link to the 7300 and 7310 pit file to repartition.
after all I am not sure, but I am rather giving a shot, so you might wait for a more experienced senior user who can figure it out straight
prince93 said:
I feel like it has a corrupted bootloader or so,
how to circumvent this?
well maybe if you use the pit file to repartition the tablet then install a boot loader from an old and complete stock honeycomb would make a difference.
you can check sammobile for a stock complete honey comb and check additional downloads for a PDF to describe how to flash using ODIN and another link to the 7300 and 7310 pit file to repartition.
after all I am not sure, but I am rather giving a shot, so you might wait for a more experienced senior user who can figure it out straight
Click to expand...
Click to collapse
I felt like I needed the pit file but wasn't sure. I will look for it but doubt that I will find. If you know where to get the pit file please get me the link. I appreciate it.
Edit: Can I just pull the pit file from a stock ROM
ReEdit: I think I found what I need. Ill report back.
addictedhacks said:
I felt like I needed the pit file but wasn't sure. I will look for it but doubt that I will find. If you know where to get the pit file please get me the link. I appreciate it.
Edit: Can I just pull the pit file from a stock ROM
ReEdit: I think I found what I need. Ill report back.
Click to expand...
Click to collapse
you can find the pit file at samfirmware if you search for the tab in "firmware and files"
But I'm really not sure of this. I'm just thinking with you, so my advice is to wait some time for a senior member who can help you without guessing, because they may render the tablet unusable, so it might be abit dangerous to go for these guesses right now .
prince93 said:
you can find the pit file at samfirmware if you search for the tab in "firmware and files"
But I'm really not sure of this. I'm just thinking with you, so my advice is to wait some time for a senior member who can help you without guessing, because they may render the tablet unusable, so it might be abit dangerous to go for these guesses right now .
Click to expand...
Click to collapse
Ok now i am screwed tablet stuck in download.
Doesnt work with the pit file either.
Have you flashed the pit file with repartition ticked?
Also after repartitoning, have you flashed the bootloader of stock honeycomb then flashed a stock honeycomb for your tablet? (@ PDA & CSC)?
Sent from my GT-P7300 using xda app-developers app
prince93 said:
Have you flashed the pit file with repartition ticked?
Also after repartitoning, have you flashed the bootloader of stock honeycomb then flashed a stock honeycomb for your tablet? (@ PDA & CSC)?
Sent from my GT-P7300 using xda app-developers app
Click to expand...
Click to collapse
I did... There is only one and only one thing that will flash successfully and thats the pit. Nothing else will flash.
addictedhacks said:
I did... There is only one and only one thing that will flash successfully and thats the pit. Nothing else will flash.
Click to expand...
Click to collapse
Have you checked the service manual for changing the software for the tablet on samfirmware?
I read that after you flash the pit file, you should remove the battery then connect to odin and flash the bootloader, PDA, CSC files from a previous complete stock.
Please read the service manual carefully from samfirmware to check the steps accuratley.
Sent from my GT-P7300 using xda app-developers app
prince93 said:
Have you checked the service manual for changing the software for the tablet on samfirmware?
I read that after you flash the pit file, you should remove the battery then connect to odin and flash the bootloader, PDA, CSC files from a previous complete stock.
Please read the service manual carefully from samfirmware to check the steps accuratley.
Sent from my GT-P7300 using xda app-developers app
Click to expand...
Click to collapse
Yea I tried that just now. No luck... I am going to read the instructions but I am sure I have done everything correctly.
Edit: I am doing everything correctly. Only the Pit will flash successfully. Since I have flashed the pit I have lost my stock recovery. Before I used to just factory reset and turn it back on now I cant..
Help me out guys i really need save my phone.
i have been trying to update my 2.3.6 to 4.3 (Jellybean) through Odin since I always got some weird stopping at 69% on Kies, but i seemed to fail on odin, Odin was failing to do it so i tried other odin ver and got stuck on the ''NAND Write Start'' thing, i exited odin and then tried something else i'm very stupid so i used a pit for the wrong version of my android to..help in whatever it was i dont remember, together with the ROM.
i didn't check if my phone was aleadry bricked after i force closed odin in patching in the first time so i don't know the root of the problem.
and i don't know if this is Soft or full brick but i get stuck at Firmware Upgrade encountered a issue, Kies does not help in it when i type the cellphone info into that option, it gives me a error so no way through kies. i didn't do any way yet to try to save it i'm really unsure what to do i checked really a bunch of different posts so its really confusing, i really get in panic when stuff like this happens so forgive me, i hope anyone can help in somehow, also, if better i need to save it in a way without having to wipe my stuff because most of my apps data are in the phone, but i dont mind if theres no other way than using wiping in one of the steps.
i don't really know how to follow if you link me over a thread so its better if you post the explanation here.
Icarusu said:
Help me out guys i really need save my phone.
i have been trying to update my 2.3.6 to 4.3 (Jellybean) through Odin since I always got some weird stopping at 69% on Kies, but i seemed to fail on odin, Odin was failing to do it so i tried other odin ver and got stuck on the ''NAND Write Start'' thing, i exited odin and then tried something else i'm very stupid so i used a pit for the wrong version of my android to..help in whatever it was i dont remember, together with the ROM.
i didn't check if my phone was aleadry bricked after i force closed odin in patching in the first time so i don't know the root of the problem.
and i don't know if this is Soft or full brick but i get stuck at Firmware Upgrade encountered a issue, Kies does not help in it when i type the cellphone info into that option, it gives me a error so no way through kies. i didn't do any way yet to try to save it i'm really unsure what to do i checked really a bunch of different posts so its really confusing, i really get in panic when stuff like this happens so forgive me, i hope anyone can help in somehow, also, if better i need to save it in a way without having to wipe my stuff because most of my apps data are in the phone, but i dont mind if theres no other way than using wiping in one of the steps.
i don't really know how to follow if you link me over a thread so its better if you post the explanation here.
Click to expand...
Click to collapse
if better i need to save it in a way without having to wipe my stuff
Click to expand...
Click to collapse
You must do factory reset when you go from GB to JB. That is why you get a bootloop probably.
So to make it short situations is like this:
1. You had problem with Kies
2. Tried with Odin and got force close of odin in Windows?
3. Retry with Kies with same ending
So what Windows do you use? Do you use 8? I read some had problem with Odin and 8.x. Did you use Odin 3.0.x?
shut_down said:
You must do factory reset when you go from GB to JB. That is why you get a bootloop probably.
So to make it short situations is like this:
1. You had problem with Kies
2. Tried with Odin and got force close of odin in Windows?
3. Retry with Kies with same ending
So what Windows do you use? Do you use 8? I read some had problem with Odin and 8.x. Did you use Odin 3.0.x?
Click to expand...
Click to collapse
Yeah, forced closed odin 2 times, kies like stopped and disconnected everything on 69% leaving only the android on downloading screen but that didnt brick it, i use windows 7, odin 3.09 only gave me fails so i used 3.07 where it got stuck on nand thing.
also, any ways to backup things even though the thing is bricked? i can go to download mode fine and i think i can go into recovery too (never tried it on this phone)
Icarusu said:
Yeah, forced closed odin 2 times, kies like stopped and disconnected everything on 69% leaving only the android on downloading screen but that didnt brick it, i use windows 7, odin 3.09 only gave me fails so i used 3.07 where it got stuck on nand thing.
also, any ways to backup things even though the thing is bricked? i can go to download mode fine and i think i can go into recovery too (never tried it on this phone)
Click to expand...
Click to collapse
Your internal data (on internal SD) will be there, but Factory reset will delete your apps and its data.
Or try to flash GB with ODIN and see what happens.
shut_down said:
Your internal data (on internal SD) will be there, but Factory reset will delete your apps and its data.
Or try to flash GB with ODIN and see what happens.
Click to expand...
Click to collapse
ehh give me a tutorial of what to do to unbrick it. i really need unbrick it. its a soft brick or full brick?
Icarusu said:
ehh give me a tutorial of what to do to unbrick it. i really need unbrick it. its a soft brick or full brick?
Click to expand...
Click to collapse
It is probably soft, you can go to Odin. Way to unbrick it is to flash stock firmware with Odin - like you did. Find GB firmware and flash it with odin like you did.
http://forum.xda-developers.com/showthread.php?t=1985398
If your phone is I9070 then use firmware for I9070, if it is I9070P use I9070P firmware. If you miss this you will hardbrick phone, and not be able to use Download mode.
And do not use Hong Kong firmware.
sammobile.com and samsung-updates.com are sites where you can find firmwares.
You were on custom ROM when you did update with Kies?
shut_down said:
It is probably soft, you can go to Odin. Way to unbrick it is to flash stock firmware with Odin - like you did. Find GB firmware and flash it with odin like you did.
http://forum.xda-developers.com/showthread.php?t=1985398
If your phone is I9070 then use firmware for I9070, if it is I9070P use I9070P firmware. If you miss this you will hardbrick phone, and not be able to use Download mode.
And do not use Hong Kong firmware.
sammobile.com and samsung-updates.com are sites where you can find firmwares.
You were on custom ROM when you did update with Kies?
Click to expand...
Click to collapse
no i wasnt
also
any of those are of my region does it matter? will i get stuck in nando writing if i try this with a GB firmware?
Icarusu said:
no i wasnt
also
any of those are of my region does it matter? will i get stuck in nando writing if i try this with a GB firmware?
Click to expand...
Click to collapse
Use region next to you, I am using Italian and I am from Serbia. I do not know if you will get nand write error, you should not get it in first place. Maybe something is wrong with it...
shut_down said:
Use region next to you, I am using Italian and I am from Serbia. I do not know if you will get nand write error, you should not get it in first place. Maybe something is wrong with it...
Click to expand...
Click to collapse
Hm, alright i'll use one firmware
but what if i get the nand thing and has to force close odin again? will i get fullbrick?
Icarusu said:
Hm, alright i'll use one firmware
but what if i get the nand thing and has to force close odin again? will i get fullbrick?
Click to expand...
Click to collapse
I am not 100% sure about that. Maybe try other ODIN versions. But I used 3.0.7 without problem. Search for nand write problem to see what is it about.
P.S. Redownlaod firmware maybe, is it the same size as shown on the page when you started download?
shut_down said:
I am not 100% sure about that. Maybe try other ODIN versions. But I used 3.0.7 without problem. Search for nand write problem to see what is it about.
P.S. Redownlaod firmware maybe, is it the same size as shown on the page when you started download?
Click to expand...
Click to collapse
Yeah um it was, as i said Odin 3.09 only failed while 3.07 got stuck in nando. isnt there someone that knows about that nando thing? i readed alot but i dont think i can really find a good answer.
alright so, downloaded a 2.3.6 firmware, i download which odin? i do need download that ''odin tools'' from that link you linked me ? because it has a very old ver of odin but skipping that it has a PIT file that i dont really know what it is for.
Icarusu said:
Yeah um it was, as i said Odin 3.09 only failed while 3.07 got stuck in nando. isnt there someone that knows about that nando thing? i readed alot but i dont think i can really find a good answer.
alright so, downloaded a 2.3.6 firmware, i download which odin? i do need download that ''odin tools'' from that link you linked me ? because it has a very old ver of odin but skipping that it has a PIT file that i dont really know what it is for.
Click to expand...
Click to collapse
Sorry, use this for downgrade: http://forum.xda-developers.com/showthread.php?t=2195673
I think no matter what Odin. I used 3.07 without any problems so far.
shut_down said:
Sorry, use this for downgrade: http://forum.xda-developers.com/showthread.php?t=2195673
I think no matter what Odin. I used 3.07 without any problems so far.
Click to expand...
Click to collapse
downgrade? i was updating from 2.3.6 to Jelly bean when i bricked. i dont know if i even got to jelly bean when i bricked.
jumping to a downgrade subject of sudden is abit weird..i was just going flash it with the same version of my android and see if it would work.
do i need really to folow that method or i can keep going and flash it how you told me to?
Icarusu said:
downgrade? i was updating from 2.3.6 to Jelly bean when i bricked. i dont know if i even got to jelly bean when i bricked.
jumping to a downgrade subject of sudden is abit weird..i was just going flash it with the same version of my android and see if it would work.
do i need really to folow that method or i can keep going and flash it how you told me to?
Click to expand...
Click to collapse
Follow the whole procedure from that thread. Except the part of 16GB version, if you do not have one.
shut_down said:
Follow the whole procedure from that thread. Except the part of 16GB version, if you do not have one.
Click to expand...
Click to collapse
alright i'll do it just tell me if theres any way to backup my storage from my soft bricked cellphone because some of my stuff was in the internal storage.
Icarusu said:
alright i'll do it just tell me if theres any way to backup my storage from my soft bricked cellphone because some of my stuff was in the internal storage.
Click to expand...
Click to collapse
I am not sure if that method formats internal storage. And if you get adb shell you could do it with command or with total commander with adb plugin (for that go to my profile, to all threads I started and you will see one about it).
shut_down said:
I am not sure if that method formats internal storage. And if you get adb shell you could do it with command or with total commander with adb plugin (for that go to my profile, to all threads I started and you will see one about it).
Click to expand...
Click to collapse
mm tried adb well it dont detect it since its bricked it only turns off android to the firmware upgrade screen thing. well i'll use the method now. wish me luck
shut_down said:
I am not sure if that method formats internal storage. And if you get adb shell you could do it with command or with total commander with adb plugin (for that go to my profile, to all threads I started and you will see one about it).
Click to expand...
Click to collapse
Oh, well it worked, thanks.
still, its all gone now but i can install each app again, there wasn't much important things that i lost.
well since its normal again but without nothing, when i decide to try update it again which way you would recommend me off? i mean, a really good one that isnt by Kies?
Icarusu said:
Oh, well it worked, thanks.
still, its all gone now but i can install each app again, there wasn't much important things that i lost.
well since its normal again but without nothing, when i decide to try update it again which way you would recommend me off? i mean, a really good one that isnt by Kies?
Click to expand...
Click to collapse
Odin. Like you did now, just with JB firmware for your I9070 model (P or non P, if you miss that you will hard brick, for example if you flash P firmware on non P phone, and otherwise).
Just follow this http://forum.xda-developers.com/showthread.php?t=1985398
Simple as - put firmware in PDA, hit flash. And check if you have unchecked/checked as it is written there.
Probably Kies was the problem, because that nand write error. He messed up, and now this fixed it.
shut_down said:
Odin. Like you did now, just with JB firmware for your I9070 model (P or non P, if you miss that you will hard brick, for example if you flash P firmware on non P phone, and otherwise).
Just follow this http://forum.xda-developers.com/showthread.php?t=1985398
Simple as - put firmware in PDA, hit flash. And check if you have unchecked/checked as it is written there.
Probably Kies was the problem, because that nand write error. He messed up, and now this fixed it.
Click to expand...
Click to collapse
mmm. alright so i should get the jelly bean firmware from that website then use it on odin as its listed. should i use the odin listed in that thread or any ver. will do? any region will work?