Related
hopefully this tutorial will help fpsece be more fun/playable for everyone.
UPDATE: FPSEce configuration-imo this is one of the best set ups for the wing, but see what you come up with. a little tricky but here goes.
1ST to do this i utilize htc home and battery status plugins. i have been playing this emu overclocked to 299 mhz for periods of up to 2hrs. i do not condone this behavior! and don't even suggest it! but, you get the best gameplay out of the emu.
2ND, make sure all running apps are closed except fpsece,with your device in regular portrait mode with htc home on your today screen, open the keyboard on your wing, go to your programs tab on htc home and press the portrait to landscape flip button. if you you do not have that one activated take a sec and swap it out with one of the other buttons it should be worth it. after this your screen will look funny cause your keyboard is out and your screen has flipped back to portrait orientation.perfect!
3RD, navigate to fpsece and open. go to options/misc/display/landscape left.
4Th, go back into options and choose the joypad/assign buttons. now turn the device so you are looking at the keyboard normally. these are my keymaps but feel free to do your own! PAGE UP-TRIANGLE PAGE DOWN-X ARROW LEFT-SQUQRE ARROW RIGHT-CIRCLE A-LEFT S-UP D-RIGHT Z-DOWN Q-L1 W-L2 O-R1 P-R2 START-SPACEBAR SELECT-TAB MENU- CENTER OF DIRECTIONAL PAD on the screen portion of the wing. finally hit ok!
5TH hit the start tab, then iso and finally navigate to your game WHICH SHOULD BE IN ISOS FOLDER ON YOUR STORAGE CARD. this way you can keep many games on your storage card!
pocket iso guide- http://pdai.org/michu/fpsece/ldrguide.html
this will get your game file sizes way down and your memory card less cramped as well as more games will be compatible with fpsece.
Couple Q's
On CPU Type are you on ARMv4 or ARMv5 ?
Misc-> GFX Driver -> GAPI ?
GiZZy said:
Couple Q's
On CPU Type are you on ARMv4 or ARMv5 ?
Misc-> GFX Driver -> GAPI ?
Click to expand...
Click to collapse
my settings are on usa...recompiler...arm v5...GDI...fast boot...but these may or may not be the best. i am still learning the ideal options myself. i think vga is supposed to be the best/fastest but it depends on the type of device. also i know on some games, gran turismo for example,that adjusting the frame skip number does help speed the game. example: if you are getting5 fps set to 1 on options this will bump it up closer to ten. if you have 12 fps bump up to 2 this may get you closer to 20 fps and so on.
I am trying to install FPSEce on my Herald.
Put your Bios (i.e scph1001.bin) in your FpseCE\BIOS directory
Click to expand...
Click to collapse
What bois ?
Niwla said:
I am trying to install FPSEce on my Herald.
What bois ?
Click to expand...
Click to collapse
you will have to locate yours...maybe it will be on google....ps1 bios??
been waiting for this post for a while
what version are u guys messing with
Hey guys this is my first post on this site i just recently got my first PDA, the wing. I have a slim RUU and i was overclocking to about 280 and when the games are loading they are running from 20-60 ftps but during gameplay it drop down to 8-13max, am i doing something wrong, im using the same set up you guys have been discussing here. and when i set frameskip i cant change numbers, its either a check mark or no check mark. any feedback would be great. thank you
JesusLoves said:
Hey guys this is my first post on this site i just recently got my first PDA, the wing. I have a slim RUU and i was overclocking to about 280 and when the games are loading they are running from 20-60 ftps but during gameplay it drop down to 8-13max, am i doing something wrong, im using the same set up you guys have been discussing here. and when i set frameskip i cant change numbers, its either a check mark or no check mark. any feedback would be great. thank you
Click to expand...
Click to collapse
Setup your controller settings. Bind a key to "menu." Then press that key during gameplay, tap options, then adjust the frames from there.
Ok, i have a HTC Heremes, but i thought i'd just ask here, instead of opening a new thread in Hermes section. I get stuck at FPSece screen, no matter how i set up the options, nothing happens. I loaded ps1 bios. And i'm trying to find a tutorial or guide, but can't find any, all of them are mostly about ripping. Any ideas?
try reading this http://forum.xda-developers.com/showthread.php?t=369855&page=8 . also try the link in my sig!
Yea i got a question or 2.
All the ps1 ios' are like 25mb +
How am i susposed to put them on the phone since the phone dont have that much memory, and i cant reach my memorycard through activsync,
also i have dialup *errgg* and downloading iso' that big is a little impossible for my internet connection, is there a site to find iso's 25mb and smaller?
OK, I downloaded the software to play the games but I don't know where to get the games from. People have said they would be around 25mb, but I can only find ones for 350mb+. Please help. I have a Touch Pro 2
Wow, way to raise a thread from the bottom of the sea there...and about a completely different device too boot. Anyways, the games are not going to be 25MB, if they are then they are either demos or homebrew stuff. Most PSX ISOs are AT LEAST 350MB, but can go as large as a CD, IE 680MB or so. You can try to compress these down using that tool in the first post, albeit you will have to search around for it since the original creators website is not around anymore.
Ok, I've spent forever and a day looking this stuff up....so I have everything I need. Now if someone could walk we through getting my isos's to show up in the isos file that would be great! Does anyone know what I'm talking about?
Did you actually download the ISO's? And if you did, you make an ISO folder on your storage card and then transfer the ISO to it.
forgive me if this post is in the wrong section - i'm new to this forum
i've got a problem with my htc p4350 (herald) when using fpsece
i can start fpsece, but when i try to load a .iso file, the screen turns black for about 10 seconds, and after that it just returns to the home screen
i cannot reach any options screen or etc.
i got the right bios copied and trued 3 different files to load
maybe these are just the wrong files?
(in that case, which files should i try, and where can i get these?)
thanx in advance
bram
Hi,
I've loaded SmartGear 1.0.4 onto my Diamond after reading that it's on a few people's "must-have apps" lists. I'm not having the easiest time setting up controls: how do all of you have your Diamond set up for controls for this or any emulators? The "touchscreen" controls don't do anything no matter how I set them in the TS settings, and setting the controls to use the directional keys does not work well at all (the up,down,left,right of the Diamond is NOT conducive to video game play!) Every time I hit the left key it hits the home key.
Is there a way to get the Touchscreen controls to actually work as game controls?
Thanks!
PS: I'm open to suggestions for different emulators too if they work better on Diamond!!
Nevermind, figured it out.
how did you fix this, i had same problem with another emulator?
Please Please Please tell us how you got it to work.
I tried everything and it just doesn't work.
I'm using the (shouldbe) newest v1.0.4 of Smartgear.
I know that no one has been on this thread in forever, but, how did you get it to work period?!?! I have it running roms and everything but it won't recognize ANY buttons, not even hardware... how do you get this to work? Or can you suggest a different emulator? (i've tried pocketsnes and it doesn't work)
Crap, sorry guys, I honestly don't even remember at this point... I took Smartgear off my phone 3 or 4 days later after realizing that the Diamond just isn't the best device for video gaming (other than games that use the G-sensor) due to it's lack of hardware controls. I honestly couldn't tell you what I did since I don't even remember what it looks like anymore!
The only thing I can remember that I had to play with is the video resolution. Make sure yours is set to "Fit2Win*" (the one WITH the *, not the one without!!)
Hey i know people have gotten fpsece (wm playstation emulator if you didnt know) to work on the diamond and other wm.1 phones and i was wondering if anyones actually gotten it to run on the fuze ive been trying for like a week to get it to work and cant seem to find any help anywhere so if anyone could help me out or knows it wont work please tell me.
just copy your roms directly in the fpsece folder, not in the iso folder. where the exe is situated. worked for me but i say that the games are not that playable
ive tried that it still doesnt work
Victory!!!!!!!!! so stupid i should of tried this before i put it on the sd card thinking it would still work so i through fpsece on my phone memory and the games on the sd ant it works. awesome.
TGCLEAR said:
Victory!!!!!!!!! so stupid i should of tried this before i put it on the sd card thinking it would still work so i through fpsece on my phone memory and the games on the sd ant it works. awesome.
Click to expand...
Click to collapse
Not sure why, but I can run off the sd card no problem. Again not very playable with the roms i've tried.
JM33 said:
Not sure why, but I can run off the sd card no problem. Again not very playable with the roms i've tried.
Click to expand...
Click to collapse
same here. Anyone know why the site is down? I was hoping 1.0 would hit today since it will allow faster fps for games. Rumor is 1.0 is finally finished but there will be a pay to use version too..
its been down for 2 days now... i dont know how much longer i can keep hitting the refresh button
bios...
alot of people have problems with fpsce be cause they dont select a bios. if you go to ppcwarez.org-game releases- find fpsce 9.6-a couple of post down a guy posted a zip with like 8 different bios. just extract those into the bios folder. run the emulator goto choose bios. i always select the spch1001. it was recomended to work with almost any game. people haveing problems with fps need to mess with the settings. and frameskipi always set it on 2. hope this helps people. i gotta TP and i run it all off my sd card.
ya ive got it to run halfway decent if its really slow try at least throwing the emulator on your phones memory and theirs not much way getting around using the storage card for the games i got it to run on average around 30fps but im playing ff7 and when the battle starts and ends it drops to like 7 its not that bad when i set the frame skip to at least 3 but everytime i hit a wrong button it screw up so i started using the keyboard in landscape but i dont know how to turn the sound off or change the frame skip if anyone knows how please tell me.
oh and the sites back up
landscape
well you gotta map the buttons, and also i set the menue button to enter on the fuze keyboard. once you get into the menue it brings up the on screen keyboard that fills the screen. from there you can go into options to change frameskip and disable the audio, also exit the emulator or continue back to the game. 1.0 will be out soon and ill buy that ****! theres a bluetooth controller mgp 100or something like that just google bluetooth gamepad and you should find it. its cool cuz it cradles your phone and the buttons are laid out like playstation. all games on the 1.0 have a significant boost in fps. caint wait!!
thanks i figured it out after i posted that but when i open the menu sometimes it rotates the screen when im pressing another button and wont let me rotate it back and ya i wish 1.0 was out but i think theyve been saying it was coming out for a long time so i wouldnt get too excited about it.
You guys are getting 30 fps because of your cpu clock speeds wich is 528mhz default, if no2chem developes a overclocking utility wich i think hes about to do in the coming months, htc raphaels and other msm72xx cpu devices will gain huge fps increase, depending on what OC tables he can come up with, and also if a working gpu plugin that supports openGL ES is ever release that will give a even greater fps incrase overall , so if this two are release the msm7xxx devices will most likely be the best phones for fpsece.
And btw im going to buy a touch pro soon so il be join you guys pretty soon.
Regards
Rafyvitto
i just installed fpse 0.09.5 and when i try to load a rom the program close by itself and of course dont load the game any help?
who has had, the download ... further disassemble themselves
lo ini configured for MiTAC Mio A701 (as an example)
Code:
[FPSE]
DisclaimerAgree=1
LastGPU=gpusoftdx.dll
LastSPU=spusoft.dll
LastJOY0=joy0pse.dll
LastJOY1=joy1key.dll
LastCD=cdrimage.dll
LastPAR=parnull.dll
CDCountry=2
UseOtherMDEC=on
CDUseCache=off
CDCacheSize=16384
CDStreamSpeed=100
CpuMode=on
CpuMode2=off
ShowGenCode=off
AutoSpeed=on
MDEC_bw=off
DisableEngines=off
DisableLogo=off
EnableHLE=on
EmuConsole=on
UseSubQ=on
CacheSubQ=off
BiosName=SCPH1001.BIN
MemCard1=card1.mcd
MemCard2=card2.mcd
ArmCoreV5=on
ArmCoreMMX=on
UseSerial=off
ComPort=COM2
Verbose=off
Disasm=off
Debugger=off
EnablePCDRV=off
PCDRV_RO=off
ShowFPS=on
CDDA2SPU=off
HideMouseCur=off
RunSPUsync=off
SmartChnRead=off
EnableDatel=off
IgnoreCdErrs=on
[PocketPC]
Onscreen_DownRight=1
Onscreen_Down=0
Onscreen_DownLeft=0
Onscreen_UpRight=0
Onscreen_Up=0
Onscreen_UpLeft=0
ForceVGA=off
ForceGDI=off
EnableLFB=off
GFXDRV=2
Orientation=0
FpsCount=on
EnableSound=on
Stretch_x=240
Stretch_y=180
Start_y=10
SoundVolume=10
Guncon=0
SPU_IRQ=0
Main_Volume=4
Da_Volume=0
Xa_Volume=0
Isos_PATH=\Storage Card\FpseCE\ISOS
[JOY0KEY]
Up=38
Down=40
Left=37
Right=39
Start=197
Select=198
Triangle=114
Quadrangle=196
Circle=195
Cross=13
L1=0
L2=115
R1=118
R2=117
GunA=193
GunB=196
Device=0
Switch=8
An1Up=89
An1Down=66
An1Left=71
An1Right=72
An1Action=86
An2Up=73
An2Down=77
An2Left=74
An2Right=75
An2Action=78
[GPUSOFT]
UseDD=0
Fullscreen=0
AlwaysCenter=1
Scanlines=0
hiddenlines=0
[JOY1KEY]
Up=38
Down=40
Left=37
Right=39
Start=112
Select=113
Triangle=69
Quadrangle=83
Circle=68
Cross=88
L1=81
L2=87
R1=82
R2=84
Device=0
Switch=8
An1Up=89
An1Down=66
An1Left=71
An1n1Right=72
An1Action=86
An2Up=73
An2Down=77
An2Left=74
An2Right=75
An2Action=78
[SPUWAVE]
DeviceID=0
SampleRate=11025
[SPUPeops]
UseXA=1
Volume=1
XAPitch=0
UseTimer=0
SPUIRQWait=1
DebugMode=0
RecordMode=0
UseReverb=0
UseInterpolation=0
DisStereo=0
UseDBufI
holy sh*t, is this 1.0???
URBANUTS said:
F-P-S-E-C-E alpha1... enjoy!!!
not support samsung processor
download
Click to expand...
Click to collapse
any tips for gettin this to work on Touch Pro, when I open the app it goes right to the "select iso" window, and when I click on an iso it crashes.
URBANUTS said:
F-P-S-E-C-E alpha1... enjoy!!!
not support samsung processor
download
Click to expand...
Click to collapse
That is most likely fake as no Alpha version of FPSEce was released today. Plus, you only have one post which reduces your credibility to nothing.
Agent Blair said:
That is most likely fake as no Alpha version of FPSEce was released today. Plus, you only have one post which reduces your credibility to nothing.
Click to expand...
Click to collapse
this is not feke and stolen FPSECE ... from 13.1.2009
I got it to work, but how do you exit? I assigned a button to menu but I still can't get out of it without soft reseting
so ive searched and searched and havnt found a good answere on this site or on thiers.
ive got a ton of older games like minkey island and kings quest that i should be able to play on myfuze but for some reason i cannot get scummvm to work at all. could someone who has used it and knows what to do please help me out, i get to the scummvm menu once and it lets me find games but then it starts for 2 sec then goes back to windows like nothing has happened and then will not start up again... 13.1 version
so i downloaded an older version of scummvm... it turns on the game starts but the screen is upside down and the keyboard doesnt work
You will have to play around with the options, I don't remember the exact settings I use but I had the same problem as you.
this link may help you as well.
http://forums.scummvm.org/viewtopic.php?t=936
thank you very much... i cant wait ive got soo many games to play over again
My settings.
So these are my settings on my touch pro. I've beat monkey island 1 and 2 with no problems yet.
GFX
--------
Graphics mode- 2x SAI
Render mode - default
Full Screen mode- enabled
and of course on how to put the games on your phone just go to that link and read the forum, it is real specific.
i have scummvm running perfect with this games: monkey island 1,2,3 full throttle, the dig, sam and max, beneath a steel sky aaand i think day of the tentacle works ... strangley i cannot make simon the sorccerer work ...
Can any1 plz tell me the steps on how to get morphgear to work properly, cuz i have been trying but i can't get it to work right
install morphgear and morph module, you know.(morph module is the one to apply each Emulator- SNES, Genesis, GBA, etc.. )
find ROMs (may be .zip or .nes , etc...)
Don't forget to work with the setting a little bit.
general setting - click raw frame buffer for display, rotate the screen as you wish.
each module setting - set the control key as you like, enable sound (but some games it is too noisy), set speed by adjust frame skip
this should do fine! enjoy!
thank u so much, i'm doing it ight now and looking for roms hope it works
1. turn off sound will make it better
2. to play, slide the phone first then run application and assign button - it is funny that some buttons are totally opposite what its supposed to be!
3. some rom work, some 60/60 frame rate, some lower - pokemon, and some not working due to inefficient memory
vietdoan20062006
thanx for ur reply, how is sliding the phone first will make any diffrence? the problem i faced was remapping keys it was really annoying that i only assigned keys for only one rom, and what do u mean by some 60/60 frame rate, some lower plz explain. thanx
The morphgear is for free and the morph modules are not? or is there a site with free morph modules?
sorry to bring up a month old thread, but im having the same issue. i thought morphgear was free. does anybody have a workaround or a a free solution?