Hello, i got a question.
I have a dutch Galaxy Note running 4.0.3(bought it at mediamarket) which i wanted to root.
my question is, is it possible to root the galaxy the same way american people root their phone? (i'm dutch)
If so, what is the best/fastest ROM?
My baseband version is N7000XXLPT
Kernelversion:
3.0.15-N7000XXLPY-CL474507
[email protected] #3
SMP PREEMPT (date)
Buildnumber:
IML74K.XXLPY
Im quite new to rooting, so be nice
Welcome to XDA.
Before you root and start flashing kernels and roms read this thread http://forum.xda-developers.com/showthread.php?t=1633938
To root your phone....
http://forum.xda-developers.com/showthread.php?t=1647148
---------- Post added at 08:31 PM ---------- Previous post was at 08:25 PM ----------
DAFUQ kernel, SpeedMod 3-3 kernel, Franco Kernel R3 and above, CF-Root 5.6 (not older versions of CF Root ONLY 5.6 )
and Kernel used in Official CyanogenMod and Roms based on it and all known Gingerbread kernels are Safe kernels.
Before you play with recovery, flash roms, restore backups, perform factory reset make sure you are always on Safe Kernels.
And please post questions in Q&A.
Moved To Q&A
Please post questions in the Q&A section. Also take note of xda rule 3. Post only using a clear subject and message.
You're most likely to receive a helpful answer to your question if you use a short subject title that describes your problem and a message that explains in detail what your problem is and what you've tried to solve it.
Just having a [Q] as subject, is not going to help get you question answered.
I may be asking well known silly question, sorry for that.
I want to install PA so i want to root stock OS GB 2.3.6 with XWJW7, but i could not find correct CF-Root to install via ODIN,
kindly help me by providing link for correct CF-Root i should flash, OR any prerooted GB ROM for GT-I9000.
Also as i want to install PA, please let me know, do i need to flash any kernal for safety after rooting and before flashing Paranoid Android JB.
You can use cf-root jw4 kernel is compatible for jw7.
misacek said:
You can use cf-root jw4 kernel is compatible for jw7.
Click to expand...
Click to collapse
Thanks but can you please give me link of it? it would be great, still thanks for help and instant reply..
Here is everything you need.
http://forum.xda-developers.com/showthread.php?t=788108
jeet.chaudhari said:
Thanks but can you please give me link of it? it would be great, still thanks for help and instant reply..
Click to expand...
Click to collapse
I found this one
March 2012 / Android 2.3.6 / JW4 / Value Pack build:
CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip
but as you can see it is CF-Root-XX_JW4
and i have XW_JW7
so JW4 is ok but What about XX and XW? does it matter? or i should flash this one only?
Following the root cf-kernel for kernel semaphore recommend cwm and flash.
http://forum.xda-developers.com/showthread.php?t=1112908
But if you want ics or JB, read the threads on the forum.
---------- Post added at 10:26 PM ---------- Previous post was at 10:19 PM ----------
jeet.chaudhari said:
I found this one
March 2012 / Android 2.3.6 / JW4 / Value Pack build:
CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip
but as you can see it is CF-Root-XX_JW4
and i have XW_JW7
so JW4 is ok but What about XX and XW? does it matter? or i should flash this one only?
Click to expand...
Click to collapse
Yes, it was not my problem.
misacek said:
Following the root cf-kernel for kernel semaphore recommend cwm and flash.
http://forum.xda-developers.com/showthread.php?t=1112908
But if you want ics or JB, read the threads on the forum.
Click to expand...
Click to collapse
I want to go for JB CM10 so will Semaphore 2.7.4 work or the CF-Root I mentioned before? and sorry but i could not find, it semaphore is for ICS or JB, So which should i select?
You do not even jw7, just as jw4, root atd.here?
http://hellybean.site11.com/download.html
http://forum.xda-developers.com/showthread.php?t=1775169
---------- Post added at 10:38 PM ---------- Previous post was at 10:36 PM ----------
misacek said:
You do not even jw7, just as jw4, root atd.here?
http://hellybean.site11.com/download.html
http://forum.xda-developers.com/showthread.php?t=1775169
Click to expand...
Click to collapse
Study the everything here.
http://forum.xda-developers.com/showthread.php?t=1775169
http://hellybean.site11.com/download.html
Help choosing Cf-Root version for Galaxy S2
Though I have posted here many years ago, please treat me as a newbie now.
I have a Samasung Galaxy S2 w/ Android 2.3.4. I would like to add Cf-Root so that I can manually upgrade to the newest available version of Android.
1. My kernel version is 2.6.35.7-I9100 XXKH3-CL479037.
I see there are two KH versions of Cf-Root:
"XX_OXA_KH3: Untested (by me) (thx to robbielicious for the stock kernel)
XX_XEU_KH4: Tested"
Which one is better for my phone? Is there any advantage in using the KH4 which was tested by the maker, over the exact match KH3, not tested?
2. Could you please provide a link (to a reliable download site) for the latest android version? The sites that were in the original post appears to have been shut down.
CqN said:
I have a Samasung Galaxy S2 .
Click to expand...
Click to collapse
man, you just woke up an 1 year old thread on the wrong forum, this is i9000 forum, not S2, . just use device search engine to locate it.
Check this out! Links to useful Guides and " Banned " Documentaries
LOL
i dont know about rooting plz. help me guys to update my note. i want to update from ICS to jelly bean...
plz. ANYONE help me step by step ...
i dnt know about kernals..
but i have odin in my lappy nd want to install very usfull and lastest and greatest ROM's ....
plz plz plz plz plz plz .....my galxy note is very very slow...rply ASAP guys...
thank you
Gurjanthabib1 said:
i dont know about rooting plz. help me guys to update my note. i want to update from ICS to jelly bean...
plz. ANYONE help me step by step ...
i dnt know about kernals..
but i have odin in my lappy nd want to install very usfull and lastest and greatest ROM's ....
plz plz plz plz plz plz .....my galxy note is very very slow...rply ASAP guys...
thank you
Click to expand...
Click to collapse
All you have to do is first flash PhilZ kernel for your current rom. This kernel has solved brickbug, have a new CWM6 built in, and it is rooted.
Tutorial and download links is here in original thread for PhilZ kernel:
http://forum.xda-developers.com/showthread.php?t=1901191
When you flash PhilZ kernel, you are ready to flash Custom JB roms, which is far better then the "stock" leaked one, in my opinnion.
These "stock" leaked which you can find in android developement thread is flashable through PC Odin... if you want to try that one.
Choose a rom which suit your needs from Android Developement thread, read OP for instruction how to flash, and after that if you have a question, ask here
good luck:good:
thank you
djoni_gitara said:
All you have to do is first flash PhilZ kernel for your current rom. This kernel has solved brickbug, have a new CWM6 built in, and it is rooted.
Tutorial and download links is here in original thread for PhilZ kernel:
http://forum.xda-developers.com/showthread.php?t=1901191
When you flash PhilZ kernel, you are ready to flash Custom JB roms, which is far better then the "stock" leaked one, in my opinnion.
These "stock" leaked which you can find in android developement thread is flashable through PC Odin... if you want to try that one.
Choose a rom which suit your needs from Android Developement thread, read OP for instruction how to flash, and after that if you have a question, ask here
good luck:good:
Click to expand...
Click to collapse
hey brother firstly thank u so very much for ur great reply...but this i dnt know how to flash philz kernel....???? actuly i dnt know about rooting...m new to android...
can u tell me step by step...if u have some time for me bro...thank u
If you don't know about rooting, then don't. You can upgrade to JB using PC odin. Do you know how to flash using Odin?
---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------
http://forum.xda-developers.com/showthread.php?t=1424997
This thread has the info how to use odin and samfirmware.com has the download file
..
nokiamodeln91 said:
If you don't know about rooting, then don't. You can upgrade to JB using PC odin. Do you know how to flash using Odin?
---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------
http://forum.xda-developers.com/showthread.php?t=1424997
This thread has the info how to use odin and samfirmware.com has the download file
Click to expand...
Click to collapse
actuly bro i have odin my pc ..i had galaxy s2 berfore ..i tried to root that ..but tht time i tried from tutorial ..but then my phone showed yellow tringle in start of screen...but i got superuser in the main menu screen...
this time i want to do safely ..
so help me coz i want to update my phone naw....plz help
These are baby steps... you dont need to be an expert
Go to system> about phone> and there you can find info on which rom you are now, write it here or take a screen shot and post it here.
there you will find on which rom you are... then download matching philz kernel for ex. ddlr6, ddlr9 etc...
but first write here what you have in "about phone"
when you download it, flash it through stock recovery, then reboot device...
I dont have enough time now, must go in town right now, christmas is cooming
nokiamodeln91 will help you:silly: he is an expert :laugh:
I will back later...
oo
djoni_gitara said:
These are baby steps... you dont need to be an expert
Go to system> about phone> and there you can find info on which rom you are now, write it here or take a screen shot and post it here.
there you will find on which rom you are... then download matching philz kernel for ex. ddlr6, ddlr9 etc...
but first write here what you have in "about phone"
when you download it, flash it through stock recovery, then reboot device...
I dont have enough time now, must go in town right now, christmas is cooming
nokiamodeln91 will help you:silly: he is an expert :laugh:
I will back later...
Click to expand...
Click to collapse
android.v =4.0.4
baseband v. n7000DDLR1
kernel version = 3.0.15-1163394
build number IMM76D.DDLRB
nokiamodeln91 said:
If you don't know about rooting, then don't. You can upgrade to JB using PC odin. Do you know how to flash using Odin?
---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------
http://forum.xda-developers.com/showthread.php?t=1424997
This thread has the info how to use odin and samfirmware.com has the download file
Click to expand...
Click to collapse
help plzzzzzzzz
Gurjanthabib1 said:
android.v =4.0.4
baseband v. n7000DDLR1
kernel version = 3.0.15-1163394
build number IMM76D.DDLRB
Click to expand...
Click to collapse
If it is correct you need DDLRB philz kernel
here is download link:
http://www.mediafire.com/?1aib6jvsb8ya5s6
here are the instructions how to flash
http://forum.xda-developers.com/showpost.php?p=31911682&postcount=3
read a first lines or if you are lazy to read read here (you have two choices how you want flash, from stock recovery- no yelllow triangle or pc-odin - with yellow triangle, here it is a first and for me better option):
-Download xxx-signed.zip kernel matching your ROM (from the link above)
-Put the previously downloaded xxx-signed.zip file on your external sd card
-Boot into stock recovery (volume up+home+power)
-Select "apply update from external storage".
-Now select the xxx-signed.zip file you copied in previous step
-choose reboot
-You are rooted + new PhilZ-cwm6 kernel with CWM6
After that you are ready and safe to rock
Find a rom which suits your need, read and follow instructions in devs thread and thats it
Thnxxx..browser.. But I wanna ask the if I rooted by your way.. Will my warranty void for the phone... Or it will gone for forever....????
Sent from my GT-N7000 using xda app-developers app
rooting anyway will void the warranty, but you can always unroot by flashing the stock rom
I had a problem with Philz Kernel.
It didn't went to deep sleep. Sony battery was drained sooner then hydracore kernel.
Any thoughts on that?
Sent from my GT-N7000 using xda app-developers app
Philz is a stock samsung kernel, if you have problems on that, you need to check for wakelocks and apps sync
nokiamodeln91 said:
Philz is a stock samsung kernel, if you have problems on that, you need to check for wakelocks and apps sync
Click to expand...
Click to collapse
Is it a stock kernel? You sure about that?
Sent from my GT-N7000 using xda app-developers app
Yeah, but safe patched and CWM included
nokiamodeln91 said:
Yeah, but safe patched and CWM included
Click to expand...
Click to collapse
Well still have no idea why it wont go to deep sleep... do you know how to check that, when I flashed it with Hydracore all worked well, just flashed and it worked. what would you do?
Brother I wanna know after uprooting my fon can I get back my warranty coz my fon is brand new juz 25 day old... Or I should wait for officially jb launch...
Wt say????
Sent from my GT-N7000 using xda app-developers app
Nokiamodeln91,
Well i have been trying to get answer to my question already but as i posted on wrong section i am not getting answers..i have same kernel version...i have rooted using exynosabuse...now i would like to know if i can flash jeally bean using odin from the link that u mentioned or should i flash ddlr9...i dont Know abt rooting much but i was reading about busybox n subox(dont rember tat one) how should i check if i have that n is it necessary before flasing ny of those firmwares...
Sent from my GT-N7000 using xda app-developers app
from odin you can install the JB rom even on non rooted phone.. so yes yoy can
---------- Post added at 06:38 PM ---------- Previous post was at 06:38 PM ----------
Gurjanthabib1 said:
Brother I wanna know after uprooting my fon can I get back my warranty coz my fon is brand new juz 25 day old... Or I should wait for officially jb launch...
Wt say????
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
you should unroot for getting warranty
delacius said:
Well still have no idea why it wont go to deep sleep... do you know how to check that, when I flashed it with Hydracore all worked well, just flashed and it worked. what would you do?
Click to expand...
Click to collapse
If HydraCore kernel works better, why you want Philz kernel? HydraCore kernel is great kernel, i realy miss it in JB.
You can check if your phone goes into deep sleep in many way, simple way is go into settings>battery> then touch a battery graph on top of the screen, here you can check Screen on and awake state. If you notice when your screen is of that the phone was awake (blue bar) then something is causing wake locks.
You can confirm that with CpuSpy app...
And if you want to know what is causing that awake state, install BetterBatteryStats, it will give you detailed information
Hi guys,
hope I am putting this question in the right area. I basically wanted to ask if it would be possible to root my HTC one, then NOT flash a new ROM, but only flash a new kernel. As I want to remain on stock, but get features like sweep2wake and DoubleTap2Wake; and maybe some features to help assist battery life.
Thanks in advance guys.
SirObi said:
Hi guys,
hope I am putting this question in the right area. I basically wanted to ask if it would be possible to root my HTC one, then NOT flash a new ROM, but only flash a new kernel. As I want to remain on stock, but get features like sweep2wake and DoubleTap2Wake; and maybe some features to help assist battery life.
Thanks in advance guys.
Click to expand...
Click to collapse
Yes it is. Unlock the bootloader, then flash a custom recovery, flash superuser ZIP and a custom kernel through it.
There is threads here how to root
Unlock bootloader first
Then download custom recovery TWRP
flash recovery and then flash kernel.
Easy as that.
Sent from my HTC One using Tapatalk
---------- Post added at 11:43 AM ---------- Previous post was at 11:42 AM ----------
Some recoverys even root phone auto...
Sent from my HTC One using Tapatalk
Thanks a lot guys, I think I'll take the plunge sometime today after I do some more reading here. I'll let you know how I get on
Hi folks,
Selling my S6 and want to put it back on stock recovery and firmware so that the buyer can get OTA updates. I'm currently rooted with TWRP and a 5.0.1 custom ROM. What's the easiest way to do this?
TIA.
Same as always you just flash the stock 5.0.1 .tar file or 5.1.1 ojc firmware There's links for it in xda.
If you have never used Odin on a pc there's also how to guide.
Please search first before asking Odin flashing guide is about the oldest and most basic topic ever discussed in xda
---------- Post added at 05:29 PM ---------- Previous post was at 05:26 PM ----------
Look in General section
Faq,important info ,sticky Roll-up.
There's links and how-to guide