Related
Helpme Please My HTC Kais130 (AT&T Tilt) NO RUN , IS DEAD, only power on and ( smart mobility in display black) and no more
helpme please
Hello there, we all understand youre frustration. But for beeing able to assist you everyone need to know what exactly happend here? Where you flashing? Did it fell out of youre pocket? What where you doing last on it and so on. Take 5 minutts or more and provide as much info you can then edit youre post. That is AFTER you have searched and digged trought this board using google aswell for keywords on youre issue.
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
did u try hard reset?
No , i didnt do it, i dont kwon how to do it?
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
I know this is a abiouse question but I have to ask, mate.. You are not running flat on batteries? If you havent flashed youre device, and it wount boot and you got power on it you should check youre waranty on the device. Try to charge it for 10 minuts or so (check that you have charging light on) then try to start it again.
I understand you correctly that you havent HardSPL youre device at all or?
hanster said:
No , i didnt do it, i dont kwon how to do it?
Click to expand...
Click to collapse
u should do a hard reset.
Here is a step by step for u:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Remember after performing a hardreset, u will loose all your data on your phome(not on SDcard).
Kaiser_Resets
Back to Kaiser Wiki
--------------------------------------------------------------------------------
Soft Reset
Using a stylus, press the soft reset button at the bottom of the phone
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
Press and hold both soft keys
Using a stylus, press and hold the soft reset button at the bottom of the phone
Keep all three buttons pressed until the keypad lights turn off and then flash
Release the soft reset button while still pressing the soft keys
Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
Finally, press the green call button to perform the hard reset, or press other key to cancel
Bootloader
Press and hold the Camera button
Using a stylus, press and hold the soft reset button at the bottom of the phone
Release both buttons once the bootloader screen appears
did u do it?
this is my phone
this is my phone where is it the soft key
Press and hold both soft keys
I have currently disabled pics so I cant see the pics of your phone.DOnt u have kaiser?
The soft buttons are the ones next to gren and red phone buttons and above messaging and internet buttons.
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
hanster said:
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
Click to expand...
Click to collapse
just be sure u are doing the hardreset right. Some guys had problems, cause they had big fonger and they were pushing not just the soft buttons but also a buttons that are around them.
Hold these two soft buttons, then stick the stylus to the hole and hold it there antil a white screen appears where is the message shown. Then push the green phine button.
http://www.mediafire.com/?rc3vbcqdtbh
here you go a video
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
hanster said:
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
Click to expand...
Click to collapse
Ok, I have seen the videos. Did u try the reset with the kaiser closed?
I remember a thread with similar problem, will try o find it and post back.
PS: In the first video, u have three hands!!
OK, I found this one:
http://forum.xda-developers.com/showthread.php?t=374388&page=3
Similar problem, does your kaiser reboot continuosly or the screen just flashes.
Your best bet is to read the whole thread, try to learn something about mtty and contact gsleon.
Hi, I am having a problem with my diamond,
he won't start anymore!
When I push the start button the diamond vibrates and then nothing!
No light, no led, blank screen...
What can I do?
HARD Reset dude!
Press Volume up along with the center dPad and reset with the stylus.
ALL THREE OF THEM SIMULTANEOUSLY!
It seams like the diamond is turned on!
But the screen stays blank and the lights are off...
and there is no sound...
I had the problem some times but I managed it.
But now.. It seams like it won't work anymore
Once my screen jsut died. i mean it was on. everything worked, dpad, sound buttons, menu on the screen if i pressed the dpad. EXCEPT the touch function. I couldnt do anything with the touch screen. And of course the dpad jsut isnt enough. I did a hard reset and it worked. But i hate remakign tweaks, software etc That sucked big time. if it happens again. Im gonna throw it out the window (naah)
BlackFear said:
Hi, I am having a problem with my diamond,
he won't start anymore!
When I push the start button the diamond vibrates and then nothing!
No light, no led, blank screen...
What can I do?
Click to expand...
Click to collapse
I've had some similar issues. It happened to me while the phone was charging, so what I had to do was this: I unplugged it, tried to start it (it won't boot), then I plugged it to the PC with the USB cable and tried to start again. After some tries I got it running again, but it seems to be some kind of ROM trouble, which one are you using?
BlackFear said:
Hi, I am having a problem with my diamond,
he won't start anymore!
When I push the start button the diamond vibrates and then nothing!
No light, no led, blank screen...
What can I do?
Click to expand...
Click to collapse
I'm having exactly the same problem! I've tried soft resets, hard resets, pulling the battery and having it plugged into the mains and into my computer. Same thing each time.
I'm also dealing with the same problems.
Contacted HTC for repair....
i tried to upgrade the rom from WM6.1 to dynamics 2.0
i did everything and update successfully.
x1 reboot and went into start up screen saying hard reset on first run,
i tried to hard reset but my "R" dont seems to be working..
so i pressed "space bar" to restart.
after that it cant start up, i tried to hard reset, soft reset, take out battery, nothing seem to work, only a pulse of vibratiion... the screeen remains totally blank.
is my x1 dead?
thanks for the help
B3nGz said:
i tried to upgrade the rom from WM6.1 to dynamics 2.0
i did everything and update successfully.
x1 reboot and went into start up screen saying hard reset on first run,
i tried to hard reset but my "R" dont seems to be working..
so i pressed "space bar" to restart.
after that it cant start up, i tried to hard reset, soft reset, take out battery, nothing seem to work, only a pulse of vibratiion... the screeen remains totally blank.
is my x1 dead?
thanks for the help
Click to expand...
Click to collapse
try to flash that rom again
try to hold two silver keys and push the power button till you see tricoloured screen or try pushing two silver keys and soft reset button with stylus which is located in a tiny hole just stylus sized on the back right side of the phone
i tried 2 silver buttone with the power button and the back hole.
but my screen still remain blanked.
totally nothing.. only a pulse of vibration.
is it possible to be in this stage? will a totally bricked x1 still able to get tri color?
i think u should charge your battery. and then put a kovsimg.nbh file on sd card.
after that install the rom by pressing the volume button down and power button.
px1ilanmy said:
i think u should charge your battery. and then put a kovsimg.nbh file on sd card.
after that install the rom by pressing the volume button down and power button.
Click to expand...
Click to collapse
hi,
i have tried charging the phone,
i tried pressing 2 silver buttons and power button
i tried pressing 2 silver button and stylus poke reset hole for 5 sec
i tried power button with volume down..
nothing works.. its just give a pulse of vibration and a black lighted up screen, nothing else.
anyone please help. =(
you know those leds on the sides of the phone try charging the phone and see if they glow if they do then your screen may be broken or your flex cable has worn off i'll put my money on the flex cable if so then you should order a new one and replace it or take it to a service centre
Info about the way you've got to the trouble looks little... not clear.
i tried to hard reset but my "R" dont seems to be working..
so i pressed "space bar" to restart.
Click to expand...
Click to collapse
How did you press space bar if "R" doesn't work?
Then... If you can get into bootloader mode, you can reflash any rom you like... you have hard-spl installed, have you?
You can use few different combinations to get into bootloader -"power"+"vol-down" OR "power"+"cam button". As you have vibration on the start, I assume your bootloader isn't broken, so you should be able to do these operations.
Charging should work as well, even if you don't see any sign of charging.
bruno_123 said:
you know those leds on the sides of the phone try charging the phone and see if they glow if they do then your screen may be broken or your flex cable has worn off i'll put my money on the flex cable if so then you should order a new one and replace it or take it to a service centre
Click to expand...
Click to collapse
Yeah i can charge,
Led at the side does glow, when i call it will blink and vibrate, but i cant pick up, no buttons is working on the front screen, dont know about th qwerty..
i guess flex is crappy.. but if flex is crappy, the screen will light up but remain blank? the led will glow?
ultrashot said:
Info about the way you've got to the trouble looks little... not clear.
How did you press space bar if "R" doesn't work?
Then... If you can get into bootloader mode, you can reflash any rom you like... you have hard-spl installed, have you?
You can use few different combinations to get into bootloader -"power"+"vol-down" OR "power"+"cam button". As you have vibration on the start, I assume your bootloader isn't broken, so you should be able to do these operations.
Charging should work as well, even if you don't see any sign of charging.
Click to expand...
Click to collapse
thanks for the advise. i will try again! and report in again..
thanks alot bro!
B3nGz said:
i guess flex is crappy.. but if flex is crappy, the screen will light up but remain blank? the led will glow?
Click to expand...
Click to collapse
if you don't see SE logo on the start and backlight is turned on, if you don't see bootloader tricolor... looks really like it is flex (double check - I am not so advanced in hardware repairing).
Yes, leds should glow in that case.
ultrashot said:
Info about the way you've got to the trouble looks little... not clear.
How did you press space bar if "R" doesn't work?
Then... If you can get into bootloader mode, you can reflash any rom you like... you have hard-spl installed, have you?
You can use few different combinations to get into bootloader -"power"+"vol-down" OR "power"+"cam button". As you have vibration on the start, I assume your bootloader isn't broken, so you should be able to do these operations.
Charging should work as well, even if you don't see any sign of charging.
Click to expand...
Click to collapse
Hi the x1 is able to start up already.
surprisingly, for its blank screen, im able to connect and sync on windows centre and load up hardspl.
after that i follow ur instruction on power+camera, it started showing tricolor and rom flash.
thanks for all the help guys.
THANKS!
my bad , sorry for wrong info
The device powers on. The buttons on the side and button work fine. The animations of the OS are working. I have tried a hard reset, soft reset, and standard power on/off. Does this mean I should try replacing the digitizer? Any ideas that I can get done by the end of the week before I go on vacation.
ddelella said:
The device powers on. The buttons on the side and button work fine. The animations of the OS are working. I have tried a hard reset, soft reset, and standard power on/off. Does this mean I should try replacing the digitizer? Any ideas that I can get done by the end of the week before I go on vacation.
Click to expand...
Click to collapse
I think, You need screen calibration
One easy thing to try: Place the palm of your hand on the screen. Hold it there for 10 seconds. See if it works now. Helps if your hands are warm.
I've had the same problem with screen. It helps if you put your palm over the screen but it's only temporary solution. Does anybody know what is the reason for this and what needs to be done/replaced.
Would appreciate any help.
I was checking my whatsapp today and all of a sudden the screen went blank. The power and volume button didnt respond. I then tried a soft reset by holding the power and volume up keys together. I did get upto the motorola logo during power on, then the screen turns off and then turns on again with the moto logo. This happened time and again. I then tried a hard reset using the recovery by pressing the power and volume down. I then pressed factory thinking a factory reset would help, again the screen turned off and i got a blinking led for a few minutes. Now i am a working professional and dont find time to take it to the service centre. Was wondering if any of you could be of help. Thanks.
srprashant2705 said:
I was checking my whatsapp today and all of a sudden the screen went blank. The power and volume button didnt respond. I then tried a soft reset by holding the power and volume up keys together. I did get upto the motorola logo during power on, then the screen turns off and then turns on again with the moto logo. This happened time and again. I then tried a hard reset using the recovery by pressing the power and volume down. I then pressed factory thinking a factory reset would help, again the screen turned off and i got a blinking led for a few minutes. Now i am a working professional and dont find time to take it to the service centre. Was wondering if any of you could be of help. Thanks.
Click to expand...
Click to collapse
Hello there,
MOstly your battery must have drain so just recharge ur battery and try powering it on. If this didnt help please elaborate your problem by telling did u tried doing something such as trying to root or trying to install a custom room.
pritesh.kedar789 said:
Hello there,
MOstly your battery must have drain so just recharge ur battery and try powering it on. If this didnt help please elaborate your problem by telling did u tried doing something such as trying to root or trying to install a custom room.
Click to expand...
Click to collapse
nevermind i gave another shot at factory reset with a calm and composed mind and have managed to get the phone up and running. thanks