1)system hangs at the point of finding SEMC Flash Device !!!
unable to install "SEMC FLASH DRIVE" .need it badly for official software upgrade of my phone se xperia x8 through Sony Ericsson PC Companion 2.0 .
please kindly provide me d/w link of "SEMC FLASH device/DRIVE"!!!
2)is there any way to install update other than through pc companion ???
what are you trying to do? click this for more info
wilbso said:
what are you trying to do? click for more info
Click to expand...
Click to collapse
upgrading os as pc companion said i had upgrade of my os and i click start and followed onscreen instructions and system hanged when it comes to SEMC FLASH DEVICE/DRIVE installation !!!
xperiax856 said:
upgrading os as pc companion said i had upgrade of my os and i click start and followed onscreen instructions and system hanged when it comes to SEMC FLASH DEVICE/DRIVE installation !!!
Click to expand...
Click to collapse
Ummm. What android version were you running on your x8?
Sent from my X8 using XDA App
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
like this then your system is hang ?
just boot on SAFE MODE
xpraken said:
like this then your system is hang ?
Click to expand...
Click to collapse
exactly !!!
just boot on SAFE MODE
Click to expand...
Click to collapse
do u mean do the update process in safe mode ???
yes
then
if u on safe mode
select safe mode with networking to work internet connection
turn off ur phone "DONT CONNECT"
open pc companion > support zone > phone software update > start > repair phone > then follow the instructions > wait for download and connect phone
to connect phone
press back and hold then connect
and feedback if work
i have this on xp too, boot in safe mode and then connect your phone and install driver
xpraken said:
yes
then
if u on safe mode
select safe mode with networking to work internet connection
turn off ur phone "DONT CONNECT"
open pc companion > support zone > phone software update > start > repair phone > then follow the instructions > wait for download and connect phone
to connect phone
press back and hold then connect
and feedback if work
Click to expand...
Click to collapse
This really worked
Thanks a lot for the very useful tip :highfive: :good:
Related
My phone shut off , when i power on it , have boot loop , can't boot to recovery mode .
I use Smartflash flash phone to stock , but i try with ROM 10a,10b,10c in this link http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
smartflash only show this error :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I change winxp , win7 , change usb COM . Smartflash only show it .
I try flash with nvflash and can't flash .
Now , i wake up the phone , and it only stop add LG logo
Sorry for my bad english .
you should try a few times. Some reported that after some attempts with timeouts the flash succeeded.
I flash rom ( 10a,10b,10c) about 5 times today , and smartflash only show the picture
Try run as admin
U must run under Windwos 7 64k its working .
i try flash with win7 and xp 32bit and 64 bit , but it always say same the picture
titan2912 said:
My phone shut off , when i power on it , have boot loop , can't boot to recovery mode .
I use Smartflash flash phone to stock , but i try with ROM 10a,10b,10c in this link http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
smartflash only show this error :
I change winxp , win7 , change usb COM . Smartflash only show it .
I try flash with nvflash and can't flash .
Now , i wake up the phone , and it only stop add LG logo
Sorry for my bad english .
Click to expand...
Click to collapse
Before u start smartflash, did u remove battery from phone,plugin to pc and press power on together with volume down key to go into firmware upgrade mode?
temasek said:
Before u start smartflash, did u remove battery from phone,plugin to pc and press power on together with volume down key to go into firmware upgrade mode?
Click to expand...
Click to collapse
I remove battery , plug in cable pc to phone , but i only press volume down until phone say firmware upgrade . ( don't press Power )
somebody can help me
Deactivate antivirus protection on your PC. Try to download again stock ROM. Maybe the file is corrupted
See this
http://android.modaco.com/content/l...lash-setup-instructions-drivers-links-active/
I have same the problem , but now its ok by this link ^^ .
raf2k said:
Deactivate antivirus protection on your PC. Try to download again stock ROM. Maybe the file is corrupted
Click to expand...
Click to collapse
My pc don't have antivirus . I download ROM 10a,10b,10c . it still error
medo18 said:
See this
http://android.modaco.com/content/l...lash-setup-instructions-drivers-links-active/
I have same the problem , but now its ok by this link ^^ .
Click to expand...
Click to collapse
I can't flash with Nvflash , after sent file .bin , the windows cloes
Should do that and the screen is black
And
Try to change the place of USB in the computer
Why havnt you tried smartflash??
Sent from my LG-P990 using XDA App
Check his first post you will find that he has.
I'm watching ths thread as I am in the same situation where I can't get a baseband onto my phone, everything else works htough.
4Th partition could be the baseband. Think yall have a badd block on the phone memory!
Sent from my LG-P990 using XDA App
On Sony's site, it says to install the android_winusb.inf-file after holding the volume up and inserting the USB but when I do that, Windows says it couldn't install the driver, and then the phones blue LED turns orange. Someone mentioned I need to install the Flashtool drivers first but I can't find it, can someone help?
EDIT: I managed to find the flashtool drivers and I installed it, and still, when I try to install the driver for fastboot, it says it wasn't able to. What do I do?
This is what happens when I try to install the drivers through device manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try to get the proper drivers with PC companion. After getting the right drivers you will be able to proceed unlocking your phone.
Sent with Tapatalk
eawert said:
Try to get the proper drivers with PC companion. After getting the right drivers you will be able to proceed unlocking your phone.
Sent with Tapatalk
Click to expand...
Click to collapse
So install PC companion > Flashtool drivers > Fastboot?
I tried installing PC Companion and even after, when I tried to install the android_winusb.inf-file it shows the same thing as I mentioned above
EDIT;
Okay, so I think I managed to figure it out, incase someone else has this problem, here's what I did;
Download Flashtool, go to C:\Flashtool\drivers, click the exe file to install the drivers, when it asks what drivers to install choose the "Xperia TX" and the "Fastboot" drivers. Then, press the volume up button and insert the USB and it'll say the fastboot drivers installed correctly and then you can proceed with unlocking your bootloader!
trojan92 said:
EDIT;
Okay, so I think I managed to figure it out, incase someone else has this problem, here's what I did;
Download Flashtool, go to C:\Flashtool\drivers, click the exe file to install the drivers, when it asks what drivers to install choose the "Xperia TX" and the "Fastboot" drivers. Then, press the volume up button and insert the USB and it'll say the fastboot drivers installed correctly and then you can proceed with unlocking your bootloader!
Click to expand...
Click to collapse
This worked for me!
I Have Glaxy Tab P1000, installed cm10.1 in it..
i tried to restock my tab with odin and battery ran out in the middle of flashing...
now the state of tab is
it shows phone-computer link screen.. only when i am charging it MOstly It keeps on blinking
removing the charger would turn off the screen imidiately.. 1 in 50 times it stays and can be connected to computer but it wont get recognized by pc
tried to use one click unbrick and odin..( pc just dont show any device connected)
i just cant power on the tab without a charger.. no matter how many keys combinations and time durations.. :/
all i can see is the screen i am posting below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try to boot to download mode (after reinstalling the drivers)
Reflash firmware you are looking for via kies or odin. I ADVISE to look for stock firmware, before flashing any custom roms.
Sent from my tab
nirvana97 said:
Try to boot to download mode (after reinstalling the drivers)
Reflash firmware you are looking for via kies or odin. I ADVISE to look for stock firmware, before flashing any custom roms.
Sent from my tab
Click to expand...
Click to collapse
I am not able to put it into download mode.. the most i can do is just wait for it to stop blinking and quickly put usb into pc... but any software niether oneclick unroot nor odin would show any sign of connection of new device!!
pushkardua said:
I am not able to put it into download mode.. the most i can do is just wait for it to stop blinking and quickly put usb into pc... but any software niether oneclick unroot nor odin would show any sign of connection of new device!!
Click to expand...
Click to collapse
The drivers are probably not installed, or need to be reinstalled.
First, you should try using the zadig.exe driver installer that comes with the Heimdall bundle (just Heimdall, not OneClickUnbrick). Plug in the Tab, Click Options -> List All Devices, then click Samsung USB Composite Device and install the driver. That should most likely make it detectable by OneClickUnbrick.
If that doesn't work, try downloading the Samsung USB Driver for Mobile Phones or Samsung Kies to install the needed drivers.
Finally, you can try getting the drivers to install automatically by plugging in the Tab, then going to your Windows system tray, right-clicking Safely Remove Hardware and opening Devices and Printers. From there, you should try to find your Tab's device listing (it's usually Samsung USB Composite Device), right-click it, and select Remove Device. Then unplug the Tab and plug it in again.
the kdz file method did not work in my cellphone
This was how i recover my cellphone from the bootloop i hope it will be usefull to other people .
-Launch the lg mobile support tool
-Install usb driver lg-p880
- conect the usb cable and press down volume at the same time you will enter in s/w upgradre
- go to software actualization in the lg tool support
- press emergency and recovery mode
- is going to ask you the imei of your cellphone so write down before and have it ready to do this step hit check press ok
- in model search lg p880
- it will open the actualization windows
Is going to make an analis of the pc
- then is going to start the download of the software 566 mb .
Later it will desscompress the file and it will start the actualization then you just have to wait to reach 100 % of the instalation you cellphone should be now reboot and start like before of the bootloop problem you will have all you cellphone information intact you will loose root access nothing else
Press thank if this help you
Sorry my english is not the best
Sent from my LG-P880 using xda app-developers app
alexromanc28 said:
the kdz file method did not work in my cellphone
This was how i recover my cellphone from the bootloop i hope it will be usefull to other people .
-Launch the lg mobile support tool
-Install usb driver lg-p880
- conect the usb cable and press down volume at the same time you will enter in s/w upgradre
- go to software actualization in the lg tool support
- press emergency and recovery mode
- is going to ask you the imei of your cellphone so write down before and have it ready to do this step hit check press ok
- in model search lg p880
- it will open the actualization windows
Is going to make an analis of the pc
- then is going to start the download of the software 566 mb .
Later it will desscompress the file and it will start the actualization then you just have to wait to reach 100 % of the instalation you cellphone should be now reboot and start like before of the bootloop problem you will have all you cellphone information intact you will loose root access nothing else
Press thank if this help you
Sorry my english is not the best
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Phone still bootloops. Actually it made it bootloop
Thank you very much, tried all methods but only this restored my p880 from a bad bootloop
u are working in lg support center ? this is just a guide to use the lg support tool. lmao
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the volume down button was broken and got bootloop when restoring a rom..I cant access to recovery or even software mode..is there other ways to access recovery tru cmd or whatnot?
lg 4x hd
alexromanc28 said:
the kdz file method did not work in my cellphone
This was how i recover my cellphone from the bootloop i hope it will be usefull to other people .
-Launch the lg mobile support tool
-Install usb driver lg-p880
- conect the usb cable and press down volume at the same time you will enter in s/w upgradre
- go to software actualization in the lg tool support
- press emergency and recovery mode
- is going to ask you the imei of your cellphone so write down before and have it ready to do this step hit check press ok
- in model search lg p880
- it will open the actualization windows
Is going to make an analis of the pc
- then is going to start the download of the software 566 mb .
Later it will desscompress the file and it will start the actualization then you just have to wait to reach 100 % of the instalation you cellphone should be now reboot and start like before of the bootloop problem you will have all you cellphone information intact you will loose root access nothing else
Press thank if this help you
Sorry my english is not the best
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Well 3rd step does not work for me lol....FML ... Nothing happens when do it, and yes all drivers are installed including adb...any ideas?
Guys I am in serious trouble here.
I am familiar with the flashing procedures and done it a lot of times with diff Roms.
I tried flashing my phone with Atrix Mod. The phone was hung up in startup display for a long time so i removed the battery and tried to restart.
But the phone would not start and neither am I able to access Recovery or Download mode. The phone is not detected in Odin.
As seen in several threads/advice i tried changing cable/ using diff PC & USB Ports but nothing helped.
The Recovery key combo shows something in Korean which I cannot read. The dowlnoad mode combo shows another korean lettering.
I will attach both for the members.
Please help as to how to restore it. If I can get it detected in Odin I can get it back up & running.
View attachment 2259470
View attachment 2259471
View attachment 2259472
himanish21 said:
Guys I am in serious trouble here.
I am familiar with the flashing procedures and done it a lot of times with diff Roms.
I tried flashing my phone with Atrix Mod. The phone was hung up in startup display for a long time so i removed the battery and tried to restart.
But the phone would not start and neither am I able to access Recovery or Download mode. The phone is not detected in Odin.
As seen in several threads/advice i tried changing cable/ using diff PC & USB Ports but nothing helped.
The Recovery key combo shows something in Korean which I cannot read. The dowlnoad mode combo shows another korean lettering.
I will attach both for the members.
Please help as to how to restore it. If I can get it detected in Odin I can get it back up & running.
View attachment 2259470
View attachment 2259471
View attachment 2259472
Click to expand...
Click to collapse
This is download mode, you shoot restart your computer, remove phone's battery and flash again. open Odin before and plug your device. Window 7 or 8 is recommended.
himanish21 said:
I tried flashing my phone with Atrix Mod.
Click to expand...
Click to collapse
read this and follow it as written.
Download/recovery modes look here under 1) Problem:- Cannot enter Download or Recovery Mode
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Solved....
Guys thanks a lot for the replies and suggestions.
Finally managed to solve it.
Here is how it happened...
1. Connected phone in download mode...(not detected in Odin)
2. Went to Device manager in Control Panel.
It showed as a unknown device as serial gadget something...
3. Right Clicked on it. No driver was present. Clicked on Update Driver.
4. Windows searched on the net and installed some driver.
5. After driver installation the connected phone was showing as Samsung Modem in USB Connections.
6. And it was detected in Odin....
Rest is all history
http://forum.xda-developers.com/images/smilies/biggrin.gif
Hope it helps someone who is having similar trouble...