Database Develop

[Q] My phone can't flash to stock ROM with smartflash,nvflash.

My phone shut off , when i power on it , have boot loop , can't boot to recovery mode .
I use Smartflash flash phone to stock , but i try with ROM 10a,10b,10c in this link http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
smartflash only show this error :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I change winxp , win7 , change usb COM . Smartflash only show it .
I try flash with nvflash and can't flash .
Now , i wake up the phone , and it only stop add LG logo
Sorry for my bad english .

you should try a few times. Some reported that after some attempts with timeouts the flash succeeded.

I flash rom ( 10a,10b,10c) about 5 times today , and smartflash only show the picture

Try run as admin

U must run under Windwos 7 64k its working .

i try flash with win7 and xp 32bit and 64 bit , but it always say same the picture

titan2912 said:
My phone shut off , when i power on it , have boot loop , can't boot to recovery mode .
I use Smartflash flash phone to stock , but i try with ROM 10a,10b,10c in this link http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
smartflash only show this error :
I change winxp , win7 , change usb COM . Smartflash only show it .
I try flash with nvflash and can't flash .
Now , i wake up the phone , and it only stop add LG logo
Sorry for my bad english .
Click to expand...
Click to collapse
Before u start smartflash, did u remove battery from phone,plugin to pc and press power on together with volume down key to go into firmware upgrade mode?

temasek said:
Before u start smartflash, did u remove battery from phone,plugin to pc and press power on together with volume down key to go into firmware upgrade mode?
Click to expand...
Click to collapse
I remove battery , plug in cable pc to phone , but i only press volume down until phone say firmware upgrade . ( don't press Power )

somebody can help me

Deactivate antivirus protection on your PC. Try to download again stock ROM. Maybe the file is corrupted

See this
http://android.modaco.com/content/l...lash-setup-instructions-drivers-links-active/
I have same the problem , but now its ok by this link ^^ .

raf2k said:
Deactivate antivirus protection on your PC. Try to download again stock ROM. Maybe the file is corrupted
Click to expand...
Click to collapse
My pc don't have antivirus . I download ROM 10a,10b,10c . it still error

medo18 said:
See this
http://android.modaco.com/content/l...lash-setup-instructions-drivers-links-active/
I have same the problem , but now its ok by this link ^^ .
Click to expand...
Click to collapse
I can't flash with Nvflash , after sent file .bin , the windows cloes

Should do that and the screen is black
And
Try to change the place of USB in the computer

Why havnt you tried smartflash??
Sent from my LG-P990 using XDA App

Check his first post you will find that he has.
I'm watching ths thread as I am in the same situation where I can't get a baseband onto my phone, everything else works htough.

4Th partition could be the baseband. Think yall have a badd block on the phone memory!
Sent from my LG-P990 using XDA App

system hangs at the point of finding SEMC Flash Device

1)system hangs at the point of finding SEMC Flash Device !!!
unable to install "SEMC FLASH DRIVE" .need it badly for official software upgrade of my phone se xperia x8 through Sony Ericsson PC Companion 2.0 .
please kindly provide me d/w link of "SEMC FLASH device/DRIVE"!!!
2)is there any way to install update other than through pc companion ???

what are you trying to do? click this for more info

wilbso said:
what are you trying to do? click for more info
Click to expand...
Click to collapse
upgrading os as pc companion said i had upgrade of my os and i click start and followed onscreen instructions and system hanged when it comes to SEMC FLASH DEVICE/DRIVE installation !!!

xperiax856 said:
upgrading os as pc companion said i had upgrade of my os and i click start and followed onscreen instructions and system hanged when it comes to SEMC FLASH DEVICE/DRIVE installation !!!
Click to expand...
Click to collapse
Ummm. What android version were you running on your x8?
Sent from my X8 using XDA App

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
like this then your system is hang ?
just boot on SAFE MODE

xpraken said:
like this then your system is hang ?
Click to expand...
Click to collapse
exactly !!!
just boot on SAFE MODE
Click to expand...
Click to collapse
do u mean do the update process in safe mode ???

yes
then
if u on safe mode
select safe mode with networking to work internet connection
turn off ur phone "DONT CONNECT"
open pc companion > support zone > phone software update > start > repair phone > then follow the instructions > wait for download and connect phone
to connect phone
press back and hold then connect
and feedback if work

i have this on xp too, boot in safe mode and then connect your phone and install driver

xpraken said:
yes
then
if u on safe mode
select safe mode with networking to work internet connection
turn off ur phone "DONT CONNECT"
open pc companion > support zone > phone software update > start > repair phone > then follow the instructions > wait for download and connect phone
to connect phone
press back and hold then connect
and feedback if work
Click to expand...
Click to collapse
This really worked
Thanks a lot for the very useful tip :highfive: :good:

Need help for SHW-M110S

Guys I am in serious trouble here.
I am familiar with the flashing procedures and done it a lot of times with diff Roms.
I tried flashing my phone with Atrix Mod. The phone was hung up in startup display for a long time so i removed the battery and tried to restart.
But the phone would not start and neither am I able to access Recovery or Download mode. The phone is not detected in Odin.
As seen in several threads/advice i tried changing cable/ using diff PC & USB Ports but nothing helped.
The Recovery key combo shows something in Korean which I cannot read. The dowlnoad mode combo shows another korean lettering.
I will attach both for the members.
Please help as to how to restore it. If I can get it detected in Odin I can get it back up & running.
View attachment 2259470
View attachment 2259471
View attachment 2259472

himanish21 said:
Guys I am in serious trouble here.
I am familiar with the flashing procedures and done it a lot of times with diff Roms.
I tried flashing my phone with Atrix Mod. The phone was hung up in startup display for a long time so i removed the battery and tried to restart.
But the phone would not start and neither am I able to access Recovery or Download mode. The phone is not detected in Odin.
As seen in several threads/advice i tried changing cable/ using diff PC & USB Ports but nothing helped.
The Recovery key combo shows something in Korean which I cannot read. The dowlnoad mode combo shows another korean lettering.
I will attach both for the members.
Please help as to how to restore it. If I can get it detected in Odin I can get it back up & running.
View attachment 2259470
View attachment 2259471
View attachment 2259472
Click to expand...
Click to collapse
This is download mode, you shoot restart your computer, remove phone's battery and flash again. open Odin before and plug your device. Window 7 or 8 is recommended.

himanish21 said:
I tried flashing my phone with Atrix Mod.
Click to expand...
Click to collapse
read this and follow it as written.
Download/recovery modes look here under 1) Problem:- Cannot enter Download or Recovery Mode
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

Solved....
Guys thanks a lot for the replies and suggestions.
Finally managed to solve it.
Here is how it happened...
1. Connected phone in download mode...(not detected in Odin)
2. Went to Device manager in Control Panel.
It showed as a unknown device as serial gadget something...
3. Right Clicked on it. No driver was present. Clicked on Update Driver.
4. Windows searched on the net and installed some driver.
5. After driver installation the connected phone was showing as Samsung Modem in USB Connections.
6. And it was detected in Odin....
Rest is all history
http://forum.xda-developers.com/images/smilies/biggrin.gif
Hope it helps someone who is having similar trouble...

[Update][S/W stuck rescue]Ultimate rescue guide

First of all, sorry for my bad english .
After i've spend alot of hours with flash after flash, fail after fail i found an easy way to rescue our Optimus 4x from dead.
You know what i mean when you get stucked with S/W screen, and you can't flash the device in any way. < should work for : 3GQCT : wParam = 2010, lParam = 210 >
Edit 1/4/2015. New method:
< Make a cable like this or buy a USB-Y cable, and try to flash with it >
http://bit.ly/1ImTveS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Why? Because Optimus 4x needs more power for flash. Also, try to play with battery if you are still stucked. How?
Start to flash without battery inside, wait 5-10 seconds after flash starts, put the battery.
If you don't have luck, combine with the old one:
So, what i've done?
1. I've disassemble the phone, till the motherboard.
2. I've disconnected all the connectors, and let only the USB connected.
3. I've hold battry manualy, while start KDZ flash, and BINGO!
See attachments.
4. Hold battery till the end of the flash, and you should get the LOVELY :
Before that, the flash stop at 17 seconds (10%) and i get Error 207 or 210.

okay. i'll try this now.. as a last resort..

confused
take a look at the picture..

Mine phone was start automatically on S/W.
You can let the board and try with it connected. Should work.

well flashed with ics :laugh:
thank you dude :good:
but after i tried to flash v20c latest, it wouldn't flash.. stops at 17 seconds.. error code(207)...
LOG attached..

After a lot of tries finally managed to flash latest v20c(germany). But sadly, that didn't fix anything..

adryyy said:
First of all, sorry for my bad english .
After i've spend alot of hours with flash after flash, fail after fail i found an easy way to rescue our Optimus 4x from dead.
You know what i mean when you get stucked with S/W screen, and you can't flash the device in any way.
So, what i've done?
1. I've disassemble the phone, till the motherboard.
2. I've disconnected all the connectors, and let only the USB connected.
3. I've hold battry manualy, while start KDZ flash, and BINGO!
See attachments.
4. Hold battery till the end of the flash, and you should get the LOVELY :
Before that, the flash stop at 17 seconds (10%) and i get Error 207 or 210.
I'll add images if someone is interested.
Click to expand...
Click to collapse
I suspect the problem comes from the sim holder or antenna(the white cable) , if you still have you phone opens then try to disconnect only one of them and flash normally.
I did have same problem with the signal and magically it's gone... but my wifi lost it MAC.... in that case I just run a script to fake one and it works
anw, I also have the 10% stuck, I used the LGFlashTool2014 (somewhere in the forum, sorry) and did a clean flash V20A with CDMA setting (???) and it passed the 10% error
FYI: link for the tool
Code:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar

I have the same issue, I followed this guide and all others very carefully and still no luck.
Thanks for the effort.:crying:

I've updated the guide. Try it .
New solution will work 90% of time.

i tried to follow this guide with no luck, and without the cable (not quite sure what do you mean with the cable drawing. )the flash still stops at 210. my phone only starts automatically in S/W.

jocrod said:
i tried to follow this guide with no luck, and without the cable (not quite sure what do you mean with the cable drawing. )the flash still stops at 210. my phone only starts automatically in S/W.
Click to expand...
Click to collapse
You should buy a USB Y cable ( http://www.nevacell.com/nevacell/images/UTStarcom/Cable/YC150B/USB_Y_Cable.JPG ) and put one USB in wall plug charger.

same issue
please help me.. my lg seems hang logo.. then i try to flash... same issue.. log 2010

I solved the issue by using the following solution: [Q] How to unbrick? (Stuck at S/W update mode)

hello, i bought this usb y-cable and im still stuck on error 210 i tried almost everything every method and nothing works im always stuck
at s/W update mode and b2cappsetup recognizes my p880 as lge455 and says v20c youre on the newest firmware
do you have another method for me ?
thanks in advance

[STOCK][GUIDE] A3300-GV/G & A3300-HV/H Return To Factory Stock Firmware

Hello everyone,
I am back on working with Lenovo tablets again. Lots of people asking me that how to return after successful or unsuccessful attemps of installing roms especially cyanogen mod series.
If you still insist on using Android 5.1.1 you can go to my thread http://forum.xda-developers.com/showthread.php?t=3267457.
Here is how to return to stock step by step :
First of all here are the links :
A3300-GV/G : http://www.mediafire.com/download/o28ke5y92kxvhui/Stock_GV_Benzersizadam.rar
A3300-HV/H :https://www.mediafire.com/?2rivx6bkg5e4ix6
1) Extract all files to seperate folders.
2) INSTALL DRIVERS (if you didnt install before. and/or if you are using Windows lower version (lower than 8/8.1/10)
If you still need to install drivers in Windows 8/8,1/10 you need to Disable Driver Enforcement please follow this guide :
a. Go To PC Settings
b. Switch over to the “Recovery” section.
c. Then go to Advanced startup
d. You will need to click on the “Restart now” button.
e. Once your Computer has rebooted you will need to choose the Troubleshoot option.
f. Then head into Advanced options.
g. Then Startup Settings.
h. Since we are modifying boot time configuration settings, you will need to restart your computer one last time.
I. Here you will be given a list of startup settings that you can change. The one we are looking for is “Disable driver signature enforcement”. To choose the setting, you will need to press the F7 key.
3) After driver installation run Flash Tool (flash_tool.exe with green icon)
4) Choose scatter loading folder and find your "MT6582_Android_scatter.txt" file from target_bin or rom folder.
5) If you do all settings correct Flash Tool will be look like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6) Power Off your tablet.
7) Put a pin to reset hole and push only for 1-2 seconds then release it. DONT TOUCH ANY BUTTON DONT CONNECT TO PC !
8) Hit download from Flash Tool wait for loading finish.
9) THE MOST IMPORTANT STEP ! Connect your tablet to computer while you are pressing volume up button. Dont release until it starts to flash.
10) Now you can release all buttons it will flash automaticly more less 5-10 minutes. After it finish you will get a green completed circle.
11) Disconnect your tablet from PC and now power up !
12) VOILA ! Your tablet returned to factory software.
I hope it fixes people's brick problem. Tried with my A3300-H and worked perfect !

Hello devs!! Need some help.. I have a a3300GV tablet which was stuck at bootloop few months back. With some research and diu tutorials I learnt that it was bricked and I followed the DIYs and flashed the appropriate ROM using SP Flash tool. It worked and then a few weeks from now, the apps started to crash one by one and it came back to previous stage Dead and bricked.
And now when I connect it to computer via USB it detects the device as MTxxx (something similar to it, which I ignored).
Tried the same DIY of flashing again, but found no luck this time. Can someone suggest a solution for it. Plz :crying:

Will it work when I do it in twrp

What drivers do i need to install for this? Answer me please

where is the previous file ? it is not working . reupload previous files ?

Don't Turkish language

Never Give Up
arun2105 bro never give read my message below that same condition is occurred few months ago even not showing charging like dead but i tried many methods, roms and it works phone gets back . And i think this is rom build number problem like A442_01_2014086 or whathever that are not belongs to our device system as i know u r indian by Bro these china devices are ported from china to india and have some changes in it. So i tried to say u try different methods or google search, youtube videos and also visit topics to related this like mtk device no power solution etc . And also i want that is u know which rom(FULL NAME) u used first time to try same method and also gave me your mail id for conversation my gmail is [email protected]
Read My Sad Story Now:crying:
i recently bricked by lenovo a3300-GV its not booting not vibrating even not showing charging. The same condition has occurred few months ago then i have flashed it with sp tool on window 7 32bit System and its worked. But this time i have Windows 10 64bit when i flashed lenovo a3300-gv mtkxxx_140826 rom after successfully flashed the tab dont showing anything or in same Condition plz Help What was going wrong this time. is 64bit system fault of driver compatibility or i have to flash another version rom suggest me. Please

Działa ale brak języka Polskiego.

Which driver to install the driver enforcement driver??????/ answer me i need my tab back its working but camera is not opennning and whenvere reboted goes to twrp
and i hat it
and plus the themes not working

Hello! I found this tablet while cleaning and wanted to fix it up.
My device is the GV variant but it turns out I installed an HV ROM onto it years ago. I was wondering how to turn it back into a GV rom so that I could use the SIM function.