Onemsomic's ics port usb problem - Galaxy S I9000 Q&A, Help & Troubleshooting

I cant connect to odin or mass storage, i cant flash new firmwares HELP!!!!!!

xXcRazycRackeRXx said:
I cant connect to odin or mass storage, i cant flash new firmwares HELP!!!!!!
Click to expand...
Click to collapse
You already tried to mount USB mode from CWM? Combo three buttons (Vol + + home + power) -> Mounts & Storage -> USB Storage mount when you get there and connect the USB cable.

nope i need stock drivers because i formatted computer and i didnt have stock rom now i cant install them

xXcRazycRackeRXx said:
nope i need stock drivers because i formatted computer and i didnt have stock rom now i cant install them
Click to expand...
Click to collapse
If you format the computer and do not have the drivers that is the reason of why Odin and your OS does not recognize your phone. You need to install the drivers. I think you don't need have a stock rom, so you just install Kies or seek only the drivers.

still nothing i installed drivers

xXcRazycRackeRXx said:
still nothing i installed drivers
Click to expand...
Click to collapse
If you have win7, don't forget to run odin "as administrator"

my computer doesnt detect sgs... my usb cable is now just a charger

bazsano1 said:
If you have win7, don't forget to run odin "as administrator"
Click to expand...
Click to collapse
and i flashed cm7 still nothing

Have you installed the latest USB device driver? http://depositfiles.com/files/8x8mgthyk

the nexus S drivers?

xXcRazycRackeRXx said:
and i flashed cm7 still nothing
Click to expand...
Click to collapse
Cm7 = usb-drivers from Android SDK
Will also give you adb.
http://developer.android.com/sdk/index.html
Install this, connect phone, update unrecognised usb device browsing to SDK folder (tick search in sub-folder)

gigeaky said:
the nexus S drivers?
Click to expand...
Click to collapse
I got them from android sdk but still nothing

O-T said:
Cm7 = usb-drivers from Android SDK
Will also give you adb.
http://developer.android.com/sdk/index.html
Install this, connect phone, update unrecognised usb device browsing to SDK folder (tick search in sub-folder)
Click to expand...
Click to collapse
I cant find "unrecognised device" in device manager

on my first ics tries i had a problem with usb because debugging via usb was enabled on my phone, as soon as it was switched off, everything was ok

Related

[HELP!!] Odin cant recognize my phone at download mode!!!

I was trying to flash rom,
after i get into download mode,
then i set up the odin n plug in the usb,
but odin didnt have any response (the id:com supposed to be yellow right?)
does anyone of u know how to fix it?
normalife said:
I was trying to flash rom,
after i get into download mode,
then i set up the odin n plug in the usb,
but odin didnt have any response (the id:com supposed to be yellow right?)
does anyone of u know how to fix it?
Click to expand...
Click to collapse
Does kies reconize phone? maybe a driver issue? usb debugging enabled? Have you had any probs before with odin? What version of odin? Maybe update it..
And another thing make sure you plug usb directly into pc not usb hub and with original usb cable.
tragusman said:
Does kies reconize phone? maybe a driver issue? usb debugging enabled? Have you had any probs before with odin? What version of odin? Maybe update it..
And another thing make sure you plug usb directly into pc not usb hub and with original usb cable.
Click to expand...
Click to collapse
Thanks for yr reply,
i already enable debugging, and plug the usb directly.
and the odin version is v1.70, i guess its the latest one.
actually it couldnt connect either with kies and my computer after i turn on the usb (the orange android logo on screen), both on my vista and xp..
normalife said:
Thanks for yr reply,
i already enable debugging, and plug the usb directly.
and the odin version is v1.70, i guess its the latest one.
actually it couldnt connect either with kies and my computer after i turn on the usb (the orange android logo on screen), both on my vista and xp..
Click to expand...
Click to collapse
Then, you should first install the USB drivers for your phone. It is not possible to connect to your phone neither through KIES or ODIN unless you install the drivers first.
rajuki said:
Then, you should first install the USB drivers for your phone. It is not possible to connect to your phone neither through KIES or ODIN unless you install the drivers first.
Click to expand...
Click to collapse
how should i install the drive? the computer should be install it automatically, isnt it? i just google that and download a software call samsung pc studio but it still cant search my phone..
normalife said:
how should i install the drive? the computer should be install it automatically, isnt it? i just google that and download a software call samsung pc studio but it still cant search my phone..
Click to expand...
Click to collapse
Try these http://graveyard.hu/SAMSUNG_USB_Driv...Phones_x86.zip
I hope you are running a 32 bit version of windows.

[Q] I`ve got a situation ...pls help !

Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !
Cocutzul said:
Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !
Click to expand...
Click to collapse
Try to use different usb port on pc. To pull out, push in cable in usb port while phone is in download mode and Odin is started. Try another usb cable.
P.S. what did you do that you got non booting system?
Sent from my GT-I9070 using Tapatalk
Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all
Cocutzul said:
Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all
Click to expand...
Click to collapse
Is recognised by Odin?
If it is, then reflash stock!
highmage said:
Is recognised by Odin?
If it is, then reflash stock!
Click to expand...
Click to collapse
Nop
Cocutzul said:
Nop
Click to expand...
Click to collapse
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Do you have any PC activity when you get to Recovery? I read that it just has black screen, but it is functional. Maybe ADB shell is working, so you can flash CoCore over it.
You can try to install this on PC: http://forum.xda-developers.com/showthread.php?t=2105707
There you have adb shell, and with some commands you can install kernel. After that you can reboot to Recovery again and you will have working Recovery (but still non booting system). Next step is to download some JB stock based ROM and to push it to sd card (you can use that Total commnader in link I gave you). After that just install ROM and it should work.
I am at work now, so I can't help you in details.
shut_down said:
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Click to expand...
Click to collapse
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .
Cocutzul said:
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .
Click to expand...
Click to collapse
Read rest of my post, I change it.
If you can't handle it - find someone that has more knowlage in Android to help you (that can do it for you).
Uninstall Kies if you have reinstalled it and remove any samsung drivers, do a registry clean on Windows with CCleaner (you can find it with Google), reboot pc then install this usb drivers, reboot again and try if now the phone in download mode is recognized on Odin (firstly powen on in download mode then connect to usb)

bootloop htc one after installing rom

hi, I my phone is in a bootloop after I installed android revelution HD
there are a lot of forums about this problem but not many about the htc one.
There is only one difference my pc won´t reconize my htc so I can´t erase the cache.
please help what should I do.
Can you enter fastboot or recovery?
LarsRosenberg said:
hi, I my phone is in a bootloop after I installed android revelution HD
there are a lot of forums about this problem but not many about the htc one.
There is only one difference my pc won´t reconize my htc so I can´t erase the cache.
please help what should I do.
Click to expand...
Click to collapse
try to change your PC or use another system, then re-install RUU after erase cache
if not, go to Recovery mode, Erase and Wipe, re-install Ruu
hope this help you
Sindroid said:
Can you enter fastboot or recovery?
Click to expand...
Click to collapse
I can enger fastboot but my pc says there is an error 43.
I can't go to recovery because when I go there hè shows the screen of the recovery And than he just reboot itself.
moha_moha20106 said:
try to change your PC or use another system, then re-install RUU after erase cache
if not, go to Recovery mode, Erase and Wipe, re-install Ruu
hope this help you
Click to expand...
Click to collapse
I have tried on 3 different computers they all don't reconize it.
I also tried to manually put a recovery on my phone but I just can't get the computers to reconize it.
LarsRosenberg said:
I have tried on 3 different computers they all don't reconize it.
I also tried to manually put a recovery on my phone but I just can't get the computers to reconize it.
Click to expand...
Click to collapse
read these tips first about your USB errors, then find the correct HTC driver, maybe your driver is corrupted
you can re-install HTCSync or search for updates
be sure your PC had latest Drivers too
http://answers.microsoft.com/en-us/...cognised/6a2a5531-8b80-4798-9aa6-ee2dcb705c7f
http://pcsupport.about.com/od/errorc/a/code-43-error.htm
moha_moha20106 said:
read these tips first about your USB errors, then find the correct HTC driver, maybe your driver is corrupted
you can re-install HTCSync or search for updates
be sure your PC had latest Drivers too
I just did all this and it still won't reconize it. It is weird because when I connect the phone to my pc it gives a sound and when I disconnect the phone my computer will also give a sound. So the computer sees the phone he just won't reconize it
Click to expand...
Click to collapse
USB driver is still your key.
LarsRosenberg said:
moha_moha20106 said:
read these tips first about your USB errors, then find the correct HTC driver, maybe your driver is corrupted
you can re-install HTCSync or search for updates
be sure your PC had latest Drivers too
I just did all this and it still won't reconize it. It is weird because when I connect the phone to my pc it gives a sound and when I disconnect the phone my computer will also give a sound. So the computer sees the phone he just won't reconize it
Click to expand...
Click to collapse
From what I could read, the only way into the phonr now for you is the fastboot. You are able to get into fastboot. So theoritically you could flash a custom recovery again and save your phone, provided your computer recognises the phone.
So, I beleieve there is no point in trying to look for a diifrent PC. Your PC should be fine. Make sure you are connecting the phone to USB 2.0 port and not to a 3.0 port. Use the standard USB cable that comes with the phone and not any cable. Uninstall all HTC software inluding drivers and wipe your computer clean using something like Ccleaner. Restart. Download and install latest HTC Sync Manager. Dwnload latest SDK package (64 or 32 bit depending on your PC). Use the latest fastboot/adb files to ping your phone and see if it works. If it works, then I beileve you know how to flash a custom recovery. Please keep us posted on your progress.
Click to expand...
Click to collapse
harihacker said:
LarsRosenberg said:
From what I could read, the only way into the phonr now for you is the fastboot. You are able to get into fastboot. So theoritically you could flash a custom recovery again and save your phone, provided your computer recognises the phone.
So, I beleieve there is no point in trying to look for a diifrent PC. Your PC should be fine. Make sure you are connecting the phone to USB 2.0 port and not to a 3.0 port. Use the standard USB cable that comes with the phone and not any cable. Uninstall all HTC software inluding drivers and wipe your computer clean using something like Ccleaner. Restart. Download and install latest HTC Sync Manager. Dwnload latest SDK package (64 or 32 bit depending on your PC). Use the latest fastboot/adb files to ping your phone and see if it works. If it works, then I beileve you know how to flash a custom recovery. Please keep us posted on your progress.
Click to expand...
Click to collapse
Can you please tell me where I can find the latest fastboot/abd and skd package can find and if I have them what should I do?
Click to expand...
Click to collapse
LarsRosenberg said:
harihacker said:
Can you please tell me where I can find the latest fastboot/abd and skd package can find and if I have them what should I do?
Click to expand...
Click to collapse
this is ADB files , be sure to extract it in folder (e.x ADB files) in your System partition (e.x C:\)
hope these files help you
Click to expand...
Click to collapse
this is HTC Driver if you can't find it Ver. 4.10.0.001.exe, i think the latest one
Right click>Run as Administrator
http://www.mediafire.com/download/3mywbswsomwkih2/HTC+Driver+4.10.0.001.exe
moha_moha20106 said:
this is HTC Driver if you can't find it Ver. 4.10.0.001.exe, i think the latest one
Right click>Run as Administrator
http://www.mediafire.com/download/3mywbswsomwkih2/HTC+Driver+4.10.0.001.exe
Click to expand...
Click to collapse
Thank you!
can you please tell me what to do from the beginning because I don't really know how you use abd and how I manually flash a recovery.
btw I really appreciate all the help!
LarsRosenberg said:
Thank you!
can you please tell me what to do from the beginning because I don't really know how you use abd and how I manually flash a recovery.
btw I really appreciate all the help!
Click to expand...
Click to collapse
First uninstall all mobile/phone softwares in your PC Like Mobogenie, samsung Kies, etc
restart your system, install HTC Driver (right click>Run as Admin.)
open HTCSync>Help>check for updates
copy extracted ADB.zip folder to your System partition (e.x C: \ )
restart again, connect your phone on pootloader (hold Vol. Down+power >press power once)
you must be connected to your pc as well
can you click Thanks
Thanks..
moha_moha20106 said:
LarsRosenberg said:
this is ADB files , be sure to extract it in folder (e.x ADB files) in your System partition (e.x C:\)
hope these files help you
Click to expand...
Click to collapse
Thanks..:good:
Click to expand...
Click to collapse
moha_moha20106 said:
First uninstall all mobile/phone softwares in your PC Like Mobogenie, samsung Kies, etc
restart your system, install HTC Driver (right click>Run as Admin.)
open HTCSync>Help>check for updates
copy extracted ADB.zip folder to your System partition (e.x C: \ )
restart again, connect your phone on pootloader (hold Vol. Down+power >press power once)
you must be connected to your pc as well
can you click Thanks
Click to expand...
Click to collapse
Bad news I idd all this 2 times and it didn't work....
When I want to erase the cache hè just says waiting for device
LarsRosenberg said:
Bad news I idd all this 2 times and it didn't work....
When I want to erase the cache hè just says waiting for device
Click to expand...
Click to collapse
can you check FAQ #2 in this guide , read carefully, step by step
maybe same problem
Hey i have got a very similiar problem tried to load the new androidhd 62 kitkat on my the phone with the wrong custom recovery.
now i am stuck in bootscreen.
I can enter bootloader and fastboot. can´t enter cwm recovery fails everytime and restarts.
when i am in bootscreeen phone will be recognised but the big problem is when i am in fastboot the drivers seem not to work anymore so phone wont be recognised and can´t get anything going. I entered the device manager when i am in bootscreen the driver is working when in fastboot there is a ? at the driver and not really responding .
what can i do?

[Q] Nexus 6 not recognized by pc after been fully wiped out

Hi guys
Really need urgent help on this one
I wanted to update my nexus 6 to latest5.0.1.
Usually i flash factory images but this time i tried to sideload. This is what i did.
I wanted to factory reset my phone and wipe everything and then side load. so i used TWRP and wiped by mistake the android OS. Now im left with nothing but twrp which also deleted my recovery file.
Now i can access my bootloader and twrp.
My main problem is that when i plug my phone to my pc it does not recognize it and i tried every possible way suggested by NRT tool to update my driver and no luck?
When i plug it to the pc it charges and i get baloon message that pc did not recognized the device.
Im using original cable.
Any help is really appreciated
Thanks
if your pc can recognize your device in fastboot mode then you can go this thread
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
fethi2 said:
if your pc can recognize your device in fastboot mode then you can go this thread
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Click to expand...
Click to collapse
As i said earlier my pc wont recognize my device.
Some said that my motherboard could be damaged is it true?
try the universal adb driver http://adbdriver.com/
you can try this one too.
Najeeb Al Busaidi said:
As i said earlier my pc wont recognize my device.
Some said that my motherboard could be damaged is it true?
Click to expand...
Click to collapse
simms22 said:
try the universal adb driver http://adbdriver.com/
Click to expand...
Click to collapse
Najeeb Al Busaidi said:
As i said earlier my pc wont recognize my device.
Some said that my motherboard could be damaged is it true?
Click to expand...
Click to collapse
If mother board was damaged, you were not able to enter in bootloader Try installing universal driver as other suggested above or install motorola's driver
Najeeb Al Busaidi said:
As i said earlier my pc wont recognize my device.
Some said that my motherboard could be damaged is it true?
Click to expand...
Click to collapse
Enable usb debugging in developer options on the phone, then choose either the drivers posted above or the Google usb drivers from the sdk. Choose to install the drivers manualy in device manager when connected to the pc.
gee2012 said:
Enable usb debugging in developer options on the phone, then choose either the drivers posted above or the Google usb drivers from the sdk. Choose to install the drivers manualy in device manager when connected to the pc.
Click to expand...
Click to collapse
Debugging is both impossible and useless.
Can't set USB debugging if android is not installed. USB debugging only works in android anyway. It has no affect on bootloader or recovery
rootSU said:
Debugging is both impossible and useless.
Can't set USB debugging if android is not installed. USB debugging only works in android anyway. It has no affect on bootloader or recovery
Click to expand...
Click to collapse
Oke thanks, never to old to learn
gee2012 said:
Oke thanks, never to old to learn
Click to expand...
Click to collapse
99.99999999 .... % of the issue is USB Drivers on the PC in question.
I'd uninstall, then reinstall, or try the universal ones.
Try on another PC if available, once seen you can get it back.
fethi2 said:
if your pc can recognize your device in fastboot mode then you can go this thread
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Click to expand...
Click to collapse
My pc cant recognize the phone while in fastboot
Hi guys
Check the attachment
And let me know if u found the problem.

Nexus 6 wont detect MTP USB but charges fine

Anyone with the same issue ? I am stuck at the bootloader since I wiped out my system image I can get to the recovery but I don't have a way to transfer new ROM since phone wont detect USB (MTP).
I didn't have any image backed to restore to. Tried OTG cable/USB nothing worked
What are my options ?
rocco24 said:
Anyone with the same issue ? I am stuck at the bootloader since I wiped out my system image I can get to the recovery but I don't have a way to transfer new ROM since phone wont detect USB (MTP).
I didn't have any image backed to restore to. Tried OTG cable/USB nothing worked
What are my options ?
Click to expand...
Click to collapse
Hi... Is data mounted and MTP enabled in TWRP?
Is your phone detected while in bootloader?
Try: fastboot devices
If phone is recognized, download stock firmware of your choice and flash it...
5.1 said:
Hi... Is data mounted and MTP enabled in TWRP?
Is your phone detected while in bootloader?
Try: fastboot devices
If phone is recognized, download stock firmware of your choice and flash it...
Click to expand...
Click to collapse
MTP is enabled but phone is not detected at all
I can access the terminal in recovery mode but it doesn't support ftp command to download any firmware.
I guess I am doomed
rocco24 said:
MTP is enabled but phone is not detected at all
I can access the terminal in recovery mode but it doesn't support ftp command to download any firmware.
I guess I am doomed
Click to expand...
Click to collapse
Wait... I don't get it...
Are you stuck in recovery? Or bootloader?
Also you can't use ftp commands either in bootloader or recovery... I suggest you start by reading this thread to learn a few basics about Android commands and how-to :
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
5.1 said:
Wait... I don't get it...
Are you stuck in recovery? Or bootloader?
Also you can't use ftp commands either in bootloader or recovery... I suggest you start by reading this thread to learn a few basics about Android commands and how-to :
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Click to expand...
Click to collapse
Sorry to confuse you I can get to the bootloader and the recovery no problem but when I try to reboot to the system it kept saying no OS installed. I don't have any ROM installed and I can't use USB cable since phone won't detect it. So I am stuck at back-end.
rocco24 said:
Sorry to confuse you I can get to the bootloader and the recovery no problem but when I try to reboot to the system it kept saying no OS installed. I don't have any ROM installed and I can't use USB cable since phone won't detect it. So I am stuck at back-end.
Click to expand...
Click to collapse
So...
What operating system is installed on your computer?
Did you already install adb/fastboot drivers?
In device manager, while being in bootloader, is your phone detected when you plug your USB cable?
Did you try different cables, USB ports?
5.1 said:
So...
What operating system is installed on your computer?
Did you already install adb/fastboot drivers?
In device manager, while being in bootloader, is your phone detected when you plug your USB cable?
Did you try different cables, USB ports?
Click to expand...
Click to collapse
I tried different cables/PCs nothing worked. I think my phone USB port is defected but what confuses me more is that it can be charged just fine but no USB connectivity
It is still under warranty but not sure if it will be honored since I have the bootloader unlocked.
rocco24 said:
Sorry to confuse you I can get to the bootloader and the recovery no problem but when I try to reboot to the system it kept saying no OS installed. I don't have any ROM installed and I can't use USB cable since phone won't detect it. So I am stuck at back-end.
Click to expand...
Click to collapse
Nothing happens in device manager when.you plug your phone? Even not recognized as an unknown device?
5.1 said:
Nothing happens in device manager when.you plug your phone? Even not recognized as an unknown device?
Click to expand...
Click to collapse
Nothing like said it is dead. I have another nexus 6 can connect easily to the PC I am pretty sure it is a phone issue.
Well, if you're 100℅ sure the USB port is damaged, there's nothing else than a repair that could bring your phone back to life... Good luck..!
5.1 said:
Well, if you're 100℅ sure the USB port is damaged, there's nothing else than a repair that could bring your phone back to life... Good luck..!
Click to expand...
Click to collapse
thanks for your time and help.
So the nexus 6 gets old now, may just check to clean your port
coremania said:
So the nexus 6 gets old now, may just check to clean your port
Click to expand...
Click to collapse
Tried that already it didn't work
Might be a driver problem.
Connect it your windows pc and check the Device Manager if it is detected as "Android" device. If so uninstall it and disconnect and reconnect it to the pc. Let windows install the MTP drivers.
aliinbox said:
Might be a driver problem.
Connect it your windows pc and check the Device Manager if it is detected as "Android" device. If so uninstall it and disconnect and reconnect it to the pc. Let windows install the MTP drivers.
Click to expand...
Click to collapse
This has already been discussed if you read the "few" previous posts ... Device isn't detected at all...

Categories

Resources