Database Develop

Help...ODIN won't recognize phone in download mode

I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???

Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?

Daneshm90 said:
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Click to expand...
Click to collapse
Yes..."SAMSUNG USB composite Device" comes up with an error. Device status shows, "This deveice cannot start. (Code 10)"

Nexus S Drivers?
Maybe u can try with Nexus S Drivers.
U can donwload from developer.android.com/sdk/win-usb.html

Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.

hamsterkiller said:
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
Click to expand...
Click to collapse
This did it! Thanks.

hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice

jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
do you have the kies drivers installed? and is kies not running (inc. shut down tray agent?
try another usb port, that was a problem I had, Odin is picky with good or bad usb ports...

jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=961956
Sent from my GT-I9000 using XDA App

SamHaLeKe:
So i tried this, but it doesnt help. I still have in device manager something wrong.
When I'm trying Update Driver Software, windows cant found right driver...
Is it possible, that I something f*ct up at last flash? Before it everything works fine. When I flashed first time, i forgot the *.pit file - odin wrote "failed" - I tried it again, but correctly - everything was ok - I fashed kernel - after that in CMW I Instaled *.zip file with Juwe's ROM 4.3.1 and my phone reboot in landscape mode... and i cant change it to normal mode.
I tried factory reset from phone - there are some red lines with this: tsf format failed on dev/block/mmcblk0p2, but when i go to CWM mode through (volUP+home button+on/of button) and i did a factory reset there - is it without red lines. Somebody ask me if i tried reflash - so i am here with my "driver problem"

hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie

toxic1 said:
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
Click to expand...
Click to collapse
Noooooo, not reinstall that bloath ware, just the NEW drivers!
Sent from my GT-I9000 using XDA App

lol ok then just drivers then

I know this may sound dumb, but make sure you are using a compatible cable.. i.e. does data transfer, I bough a replacment cable months ago for my damaged one under the impression it did data because I could connect and transfer to USB (I know this is data)... but kies would not recognize the phone.. I ended up buying a real replacement. Problem solved.

I think, that my biggest problem is cannot connect to kies and odin...
i am in the end... so cabel is the same, i used it when i flashed befor - as i said my problem is in phone, not in drivers or cabels. Is here something to do flash without this drivers?

can you confirm there is no issue with your USB ports on your computer? just seems odd it wont recognize your phone in download mode... you are placing it in download mode when using odin right?

I just did a flash with mine to a stock rom,
Same problem, I can get to DL mode, but it does not recognize,
When I am in the standard Tab OS, with USB as mass storage, I can see if fine.
Odd how it just happened as well. I'd like to follow this thread see where it goes.
*edit reinstalling drivers does not resolve the issue,
- have not tried installing keis again yet though,
- also Odin recognizes it in Recovery Mode
*edit again - sorry guys, didnt realize i was in the i9000 forum, hit this on a google search and replied

I can go to the download mode throught 3-buttons combo - but odin recognize my phone - the same thing is in kies - it's vicious circle - i hope flash help me - but I cant do it, because i cant connect to odin

Unfortunatly I am out of help... I thin kyou may need someone who knows ADB and the phones system internals if ODIn won't recognize your phone in Donload mode... I have had my phone in several bad situations(Fried internalsd/bootloaders) but download mode would always connect me to ODIN..
Last try, try different versions of odin, 1.3 - 1.8 apparently it can be testy with different versions of windows.

Try the drivers & Odin 1.83 from my signature. Works all the time.

I want to update via Kies, but can not connect

I have a Bell SGS. I updated it once from 2.1 to 2.2...now I'd like to update to 2.3.
My computer/Kies will NOT see my phone. I've done some searching, but I literally have no idea what I'm doing. I've done a factory reset on my phone hoping that would help...it didn't. I've re-installed Kies...no dice. Tried re-installing the drivers via Kies...nothing.
Any suggestions would be appreciated. Someone willing to help me step by step via e-mail would be even better.

60+ views and not a single suggestion?
I don't understand why my PC can't see my phone AT ALL.

Honestly, your best bet is to use Odin and flash the Bell UGKG3 (2.3.3) build.
You can download Odin and the Bell UGKG3 build here:
http://forum.xda-developers.com/showthread.php?t=1102881&page=1
Search for i9000m (that's what the Bell SGS is) and you'll find the UGKG3 download.
Instructions for using Odin are also on that same page.

Last time my phone was not recognized it was a broken USB cable

If your update from 2.1 to 2.2 was an unofficial update, keis will not see the phone again, unless you flash back to the official 2.1.
Once you have done that, Keis should then recognise your phone and offer you the latest Bell update.
Hope that this helps.

Geryatrix said:
If your update from 2.1 to 2.2 was an unofficial update, keis will not see the phone again, unless you flash back to the official 2.1.
Once you have done that, Keis should then recognise your phone and offer you the latest Bell update.
Hope that this helps.
Click to expand...
Click to collapse
My update from 2.1 from 2.2 was done through Kies.
Black Rose said:
Honestly, your best bet is to use Odin and flash the Bell UGKG3 (2.3.3) build.
You can download Odin and the Bell UGKG3 build here:
http://forum.xda-developers.com/showthread.php?t=1102881&page=1
Search for i9000m (that's what the Bell SGS is) and you'll find the UGKG3 download.
Instructions for using Odin are also on that same page.
Click to expand...
Click to collapse
Okay, I downloaded Odin 1.85. I found and downloaded the KG3 files, then extracted them. I got Odin all setup, put my phone in to download mode, connected it to the PC...Odin never detects the device.
TheAshaman said:
Last time my phone was not recognized it was a broken USB cable
Click to expand...
Click to collapse
After doing the above, I tried a different USB cable in a different port.
Any other suggestions guys?

First, test to make sure the usb cable works, ie, see if you can connect in mass storage mode.
Secondly, reinstall kies so that the usb drivers are installed properly.

disclaimernotice said:
First, test to make sure the usb cable works, ie, see if you can connect in mass storage mode.
Secondly, reinstall kies so that the usb drivers are installed properly.
Click to expand...
Click to collapse
As per my first post, I can NOT get my PC to see my phone.
I just tried plugging it in to another computer here at work. I'm using TW launcher, USB Setting = Ask on Connection...no dice. When I plugged in the cable, I chose mass storage, and the MTP starts...it says that it's connected to the computer...but the computer doesn't see it. Both computers are running XP.

first make sure that you have USB DEBUGING in settings/applications/development
if this will not help
-unplug phone from usb
-uninstall kies, reboot pc
-REDOWNLOAD kies and install it
-once again now make sure you do not have USB DEBUGING ticked in settings/applications/development
-make sure you have your pc setup to download drivers if neded from windows update servers
-connect phone to pc and let it install all divers it will ask for
-make sure your phone is setup to have "Samsung Kies" in settings/comunication/usb settings
-disconnect phone
-open kies and let it update (sometimes downloaded from www version of kies aint latest)
-you can and maybe should download usb drivers for samsung phones from this thread and install them
[Driver] [31.10.2011] SAMSUNG USB Drivers for Mobile Phones +LATEST UPDATED VERSION+
when everything is setted up, instlled, up to date and kies is loaded
connect your phone
and now saay what is exaactly happening after you followed those points exaact and you connect phone
---------- Post added at 07:52 PM ---------- Previous post was at 07:49 PM ----------
is there any sound from PHONE when connecting usb?
is there any sound from PC when connecting usb?
what is happening on statusbat when you connect usb?
what is happening at kies window when you connect the phone ?
what is happening at phone display when you connect the phone ?

What is kies? ^^

-unplug phone from usb
-uninstall kies, reboot pc
-REDOWNLOAD kies and install it
-once again now make sure you do not have USB DEBUGING ticked in settings/applications/development
-make sure you have your pc setup to download drivers if neded from windows update servers
-connect phone to pc and let it install all divers it will ask for
-make sure your phone is setup to have "Samsung Kies" in settings/comunication/usb settings
-disconnect phone
-open kies and let it update (sometimes downloaded from www version of kies aint latest)
Click to expand...
Click to collapse
I've done most of this a few times. The bolded section I'm not sure how to check. I've downloaded the drivers a couple times too...but am not sure I'm installing them 100% correctly.
is there any sound from PHONE when connecting usb?
No, but I have my phone set to silent...ALWAYS. It DOES vibrate though to indicate it is plugged in.
is there any sound from PC when connecting usb?
No.
what is happening on statusbat when you connect usb?
I assume you mean the battery status indicator in the notification bar? It shows that the battery is charging.
what is happening at kies window when you connect the phone?
Nothing...literally.
what is happening at phone display when you connect the phone?
Because I have "USB Setting" set to "Ask On Connection," a menu pops up with three options: Samsung Kies; Media Player; Mass Storage. None of the options seem to do anything. Even with USB set to "Samsung Kies," nothing happens.
Click to expand...
Click to collapse

Sometimes my computer also fails to recognize the phone. What i do is restart the computer/restart the phone/try again later.
Make sure your Kies is updated.
Try on another computer.
Last option: Give it to Samsung Service Center. They will mostly do it for free or for a very minimal fee.

do this http://forum.xda-developers.com/showthread.php?t=1379650
just ignore the portions for ICS

Thanks for the suggestion. I've downloaded all the files. I've also done a factory reset as well as formatted the internal memory card. As far as I can tell, my phone is as close to stock as it possible could be.
I can NOT connect my phone to ANY computer. I've tried four different computers now. Tried installing the USB drivers on one of them...nothing.
I'm starting to think that I have a hardware issue. The phone recognizes that it's connected to a PC though...so I'm not 100% convinced.

Okay...so there has been a new development.
I grabbed another phone (Samsung I997R), and tried it using the same cable and same USB port, and it recognized the phone instantly. Was able to enable Mass Storage and see everything on the phone.
So, that being said, does anyone know why my I9000M won't be seen?

You have already tried everything you could, so new just goto the Samsung Service Center and ask them what the problem is.
Sent from my GT-I9000 using XDA App

Yeah, I'll have to do that I think.
I tried plugging it in to a laptop running Linux last night...still no dice. My buddies SGS2 was recognized immediately.
I toured over to the Bell store last night for ****s and giggles, and the Samsung rep happened to be there. Dude didn't really know anything though...said he's only been on the job for a couple months. Plugged it in to the PC at the store...same deal.

I assume your phone charges OK when using the wall wart or plugged into a PC?

Yup...charges perfectly fine. The phone even recognizes when it's hooked to a computer (launches whichever USB mode is selected). It's just NOT being seen by any computer I plug it in to...but other phones are recognized using the exact same equipment (i.e. USB cable, computer, port, etc. are all the same).

Is it rooted? A guy i work with said kies wouldn't recognize it after rooting his.

[Q] Odin doesn't recognize phone

I have the latest samsung drivers installed, the phone is detected by Odin when it is on, but Odin doesn't detect it when the phone is in download mode?
If anyone can help or give any advice, thank you in advance.

Ja_guor said:
I have the latest samsung drivers installed, the phone is detected by Odin when it is on, but Odin doesn't detect it when the phone is in download mode?
If anyone can help or give any advice, thank you in advance.
Click to expand...
Click to collapse
From what I can remember, when you put the phone in download mode and connect it using usb, it tries to install another driver on your pc.. was that successfully installed?
or you can remove the samsung drivers and then reinstall them and try doing the whole process again.

I uninstalled and reinstalled the samsung driver, but odin still doesn't recognize the phone when connected by USB.
I remember multiple drivers being installed when I first connected the phone, but I'm not sure if any of them were when I connected the phone in download mode. How would I check the drivers for this or uninstall/reinstall them?

Ja_guor said:
I uninstalled and reinstalled the samsung driver, but odin still doesn't recognize the phone when connected by USB.
I remember multiple drivers being installed when I first connected the phone, but I'm not sure if any of them were when I connected the phone in download mode. How would I check the drivers for this or uninstall/reinstall them?
Click to expand...
Click to collapse
you could check in device manager of your windows for any devices for which drivers have not been installed..
should be just the drivers problem as odin recognizes when your phone is on

The only driver that seems to show up for when the phone is connected is "USB Mass Storage" device, which i uninstalled and reinstalled but odin and zadig of heimdall still don't detect as they should.
Do I have to have the USB settings of the phone in any particular mode?

Driver Source
Did you install drivers separately or along with Kies?
I had the same issue a few days back and this solved it:
1. Uninstalling all Samsung (and Google) USB drivers
2. Uninstall Kies
3. Download and run "uninstall kies" (search on the Forum/Google for UnistallKies.zip/ UninstallKies.exe)
4. Download and install latest Kies
5. Put phone in download mode AND THEN connect to PC.
See if that solves it.

Something I found....
If you have Kies on your computer, make sure it's not running in the background. Go to the Task Manager > Processes and remove it. From memory, there are two Kies apps running in the background.
Once they've stopped proceessing, try the download mode, Odin thing again.
Babe
Hmmm... not typing fast enough.... And yes, make sure your phone is in USB mode, USB debugging enabled and from memory?...... I think you have to have the non-market apps (Unknown Sources) box ticked

Ja_guor said:
The only driver that seems to show up for when the phone is connected is "USB Mass Storage" device, which i uninstalled and reinstalled but odin and zadig of heimdall still don't detect as they should.
Do I have to have the USB settings of the phone in any particular mode?
Click to expand...
Click to collapse
you have enabled usb debugging right?

Well I'm trying on another computer now, which did not have any of the drivers installed initially. I installed the latest samsung drivers WITHOUT Kies, and installed the drivers that come when the phone is connected in download mode.
Odin, both versions 1.85 and 1.3, does not detect the phone at all either on this other computer.

Oh gosh...nevermind, turns out I was in recovery mode and not download mode. Thank you for all your help though!

Ja_guor said:
Oh gosh...nevermind, turns out I was in recovery mode and not download mode. Thank you for all your help though!
Click to expand...
Click to collapse
lol..

ishangoyal said:
From what I can remember, when you put the phone in download mode and connect it using usb, it tries to install another driver on your pc.. was that successfully installed?
or you can remove the samsung drivers and then reinstall them and try doing the whole process again.
Click to expand...
Click to collapse
the driver that it tries to install fails in download mode ... i tried to reinstall drivers but it still shows the ! sign in device manager .. and shows the device as MSM7x27 .
on normal usb mode there is no issue and shows the driver as samsung ....
---------- Post added at 02:51 PM ---------- Previous post was at 02:42 PM ----------
ishangoyal said:
From what I can remember, when you put the phone in download mode and connect it using usb, it tries to install another driver on your pc.. was that successfully installed?
or you can remove the samsung drivers and then reinstall them and try doing the whole process again.
Click to expand...
Click to collapse
hi, i am facing this issue ...driver doesnt install correctly when in download mode ... tried to update ..reinstall drivers but still no use ..
in device manager it shows as msm7
running windows 8
after a uninstall and reinstall and a new usb wire it shows unrecognized device with !

connexion usb don't work but "mtp connected"

Hello everyone,
Here the problem, I just acquired a Galaxy note and I can not connect to my Windows 8 PC (or windows 7) . Whether with or without kies.
In the device manager I have "unknown device"
I also tried odin mode and recovery of origin, but no way to install the drivers.
The galaxy shows in the bar notif "mtp connected" ( the smartphone is charging)
It is version 2.3.6. stock not root with kernel: [email protected]#2
did someone have an idea?
thank you in advance for your help.
Sorry for my english, i'm french.

U can set it in Settings > USB
But since u are using GingerBread, ur device might not be able to detect the usb port as more than charging port. This is very unlikely but it can happen..
And do Enable USB Debugging..

i have tried but it doesn't work too

uninstall kies and drivers reboot the pc. then download
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
and install it without the phone connected. connect the phone and see what happens.. when you connect the phone, there will be notification of drivers being installed in the system tray of pc. click on it and you will see what is installed and what is failing.

Change ur usb cable to another usb port. This happened to me last time when I tried to flash new rom via odin. Everything is fine but the odin didn't detected it. b4 do that remember to install ur GN driver.
Sent from my GT-N7000 using xda app-developers app

i have tried to reinstall drivers but always the same problem "windows can't install the device...)
i have tried use 3 diferents usb cable too... no result
I would like change the rom (to see if it was the probleme) but it's impossible without root. And the phone don't propose upgrade OTA...

There could be a problem with the usb port itself. You could try to clean it and test again.

i have do this but no result...

tony_the_unik said:
i have do this but no result...
Click to expand...
Click to collapse
Then it could be your mini USB cable. Try another cable.
Edit: Sorry, accidentally misread something. You tried 3 usb cables. My bad.
Click to expand...
Click to collapse

[Q] I`ve got a situation ...pls help !

Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !

Cocutzul said:
Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !
Click to expand...
Click to collapse
Try to use different usb port on pc. To pull out, push in cable in usb port while phone is in download mode and Odin is started. Try another usb cable.
P.S. what did you do that you got non booting system?
Sent from my GT-I9070 using Tapatalk

Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all

Cocutzul said:
Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all
Click to expand...
Click to collapse
Is recognised by Odin?
If it is, then reflash stock!

highmage said:
Is recognised by Odin?
If it is, then reflash stock!
Click to expand...
Click to collapse
Nop

Cocutzul said:
Nop
Click to expand...
Click to collapse
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Do you have any PC activity when you get to Recovery? I read that it just has black screen, but it is functional. Maybe ADB shell is working, so you can flash CoCore over it.
You can try to install this on PC: http://forum.xda-developers.com/showthread.php?t=2105707
There you have adb shell, and with some commands you can install kernel. After that you can reboot to Recovery again and you will have working Recovery (but still non booting system). Next step is to download some JB stock based ROM and to push it to sd card (you can use that Total commnader in link I gave you). After that just install ROM and it should work.
I am at work now, so I can't help you in details.

shut_down said:
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Click to expand...
Click to collapse
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .

Cocutzul said:
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .
Click to expand...
Click to collapse
Read rest of my post, I change it.
If you can't handle it - find someone that has more knowlage in Android to help you (that can do it for you).

Uninstall Kies if you have reinstalled it and remove any samsung drivers, do a registry clean on Windows with CCleaner (you can find it with Google), reboot pc then install this usb drivers, reboot again and try if now the phone in download mode is recognized on Odin (firstly powen on in download mode then connect to usb)