Database Develop

How to Flash Onecosmic`s ICS over Darkyrom 10.2 ee

I am a complete noob in installing roms and kernels, previously my phone was rooted n darkyrom installed by my friend. I need help how to install the ICS rom by onecosmic, any help will be appreciated. Thanks

moix088 said:
I am a complete noob in installing roms and kernels, previously my phone was rooted n darkyrom installed by my friend. I need help how to install the ICS rom by onecosmic, any help will be appreciated. Thanks
Click to expand...
Click to collapse
You can follow this Video Guide for flashing Onecosmic's ICS 4.0.3 RC1

Should i flash to cm 7.1 first?

moix088 said:
Should i flash to cm 7.1 first?
Click to expand...
Click to collapse
That is better...

I was also comming from Darky's ROM.
First I flashed miui mint berry (
HTML:
http://forum.xda-developers.com/showthread.php?t=1350763
), worked without any problems.
Just make sure you follow steps exactly as described in their threads (wipe, install, wipe.... just READ).
Good luck and happy flashing!

Here is a video tutorial done by totallydubbedhd the credits go to him. You should follow the same steps but with the rc1 file instead of beta 1.
http://www.youtube.com/watch?v=NBBeennHTEA

Cyanogen RC5.6 and LilGUpdater

ciao,
I updated at cyanogen RC5.6 (my phone info confirms) but if I run Lilgupdater it still says there is the same update I had already installed.
can someone try if lilgupdater says something different?

same thing for me. The link is the same, so I assume it's the same file. squad will fix it.
I have another q regarding 5.6:
Is it me? Or is it way choppier than 5.5?
5.5 was so smooth and fast.

I also get this, but it's only minor. And I haven't noticed any lag.
Sent from my GT-S5570 using XDA

Its already fix master squad fix it
Sent from my GT-S5570 using xda premium

I have flash Emanon V5 (2.3.6), if I want to flash CyanogenMod 7.2.0 RC5.6, do I need to flash to GINGERBREAD 2.3.4 or proceed flashing CyanogenMod 7.2.0 RC5.6??

sufi37 said:
I have flash Emanon V5 (2.3.6), if I want to flash CyanogenMod 7.2.0 RC5.6, do I need to flash to GINGERBREAD 2.3.4 or proceed flashing CyanogenMod 7.2.0 RC5.6??
Click to expand...
Click to collapse
I really don't know for sure...
I've flashed from 2.3.6 to cyano 5.5
to be sure flash two times first 2.3.4 then cyano or open a new thread and ask again

sufi37 said:
I have flash Emanon V5 (2.3.6), if I want to flash CyanogenMod 7.2.0 RC5.6, do I need to flash to GINGERBREAD 2.3.4 or proceed flashing CyanogenMod 7.2.0 RC5.6??
Click to expand...
Click to collapse
no. u dont need to reflash gingerbread. i installed this rom straight from emanon v4. u only need cwm recovery use squadzones lilg one.

New to S.. Wanna flash

Guys, recently bought galaxy S i9000 with froyo
Now i wanna switch of a ICS rom which is stable and bugless with ofcourse battery life..
So how can i upgrade.
Plz guide
Sent from my GT-I9000 using XDA.

You will want to root your phone first, look in i9000 General on how to do that.
Then, look in the i9000 Development forum for an ICS ROM and follow instructions.

I think you need GB bootloaders first. Best is to upgrade with kies to GB->root->flash ICS.

Go to chainfire kernel thread in development section.there you will get all the steps to root your phone.Then go to ics ROM of your choice i would recommend CM9 or team nyx...open the thread you will get the info how to flash...you will have to flash twice...and it's done
Sent from my GT-I9000 using XDA

Okay i will update first to GB via kies and then root it and with CWM i will flash custom ICS, correct step ?

Yes it is
Sent from my GT-I9000 using xda premium

any suggestion for better baseband and good ics with battery backup?

Complete Guide
Go to this thread
http://forum.xda-developers.com/showthread.php?t=788108
Download the respective kernel according to your firmware.
Flash the kernel with odin
Now choose the ICS rom of your choice i would recommend CM9 ,Tiger(new but worthy.)Download the rom from the thread .Put the zip in internal storage .
Wipe.Flash the zip via CWM .Wipe.Then flash the zip again .
You can go this thread :
http://forum.xda-developers.com/showthread.php?t=1699154
Hit the thanks button if i helped you .
GT-I9000
Team Nyx RC5.
Semaphore 1.2.2.s
AUCKF1 Modem.

help about mtd roms and non mtd rom

Hello people of xda
I am really lost here, about mtd roms and non mtd roms
so I know that mtd is a partion scheme which is used in ics roms.
but my question is : I am running overcome with overcome kernel but lately I have been thinking to upgrade to ics(aokp rom) or JB(cm10) so can i upgrade without having to restock and if i upgraded to ics can upgrade to JB without restocking??
and if i do a restock would i lose the unlocked bootloader ??
p.s: i got the tab from my friend and he told me that he already installed cm9 but before that he did a restock then he installed overcome
THx for help

Yes, you can upgrade to ics without restocking.
Yes, from ics you can upgrade to JB without restocking.
No, from GB onward no locked boot loader. That us froyo issue.
Edit: he is right.
To return to GB you need restocking.
Sent from my GT-I9300 using xda app-developers app

priyana said:
Yes, you can upgrade to ics without restocking.
Yes, from ics you can upgrade to JB without restocking.
No, from GB onward no locked boot loader. That us froyo issue.
Edit: he is right.
To return to GB you need restocking.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
well thx bro , so what i have got that if i am on overcome and want to update jelly bean or ics i dont need to rstok(it worked i updated to aokp without any problem) bur niw if i want to upgrade jb is it safe??
and if iwanted to go back to overcome is it safe or need a restok
and thx for helping
sorry i am a noob

u can go for jb directly over aokp bt for overcome now u need to restock.
Sent from my GT-P1000 using xda app-developers app

Perhaps we didn't make it clear. Overcome is GB based.
And all GB rom are non-mtd.
From mtd to non-mtd , always requires restock with repartition in Odin.
Sent from my GT-I9300 using xda app-developers app

Thank you guys for helping now I have got it

plz sorry irrelavant but help i installed cm9 RC1 p1 and found the above problems are they common? or is there any update.zip to fix these so that i can flash it through CWM..
or any better rom with these functioning is available...
if yes, can i directly flash the rom using CWM....by factory rese,clearing cache partirtion,dalvik clear.
and wt abt this mdt/non mdt things...wts "overcome".... in noob terms plz?

sagargiet said:
plz sorry irrelavant but help i installed cm9 RC1 p1 and found the above problems are they common? or is there any update.zip to fix these so that i can flash it through CWM..
or any better rom with these functioning is available...
if yes, can i directly flash the rom using CWM....by factory rese,clearing cache partirtion,dalvik clear.
and wt abt this mdt/non mdt things...wts "overcome".... in noob terms plz?
Click to expand...
Click to collapse
Don't know what you are talking about as "above problem".
CM9 RC1 has no update.zip, it is as it is and I heard of no issue.
now. MTD and BML (samsung's partition scheme aka NON-MTD) are partition tables.
That is a specs of how a piece of disk should be sliced up and how to describe the slices.
You only need to know that CM9 and AOKP ROM uses MTD partition while all Gingerbread ROM for our device uses BML (NON-MTD).
When you flash ICS the first time, your partition will be converted to MTD.
To convert back to BML you need to use Odin/Heimdall with stock ROM that has pit file and you need to select to repartition the device.
Overcome ROM is a famous GB ROM modded by Team Overcome.
http://www.teamovercome.net
"Overcome method" of restocking refers to the set of downloads and guide that Team Overcome recommends to people to correctly restock their device.
It is, in my opinion, the best way to ensure you have no problem install ICS.
I am now recommending you to do that and see if you have problem in CM9
So
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
Please note:
- you want to restock using GB-stock-safe and the Odin included in the package
- you then flash overcome kernel 4.0 tar using Odin
- you don't need to wait for the robotic voice to complete the ext4 conversion, just force reboot to recovery and use the recovery to flash ICS from sdcard.
- you need to flash ICS twice because round one converts to MTD and reboot
- you need to flash gapps after you flash ICS

Thanks for all the pain u have taken replying me. I faced problems like camera doesn't work at all.force closes. couldn't find external micro SD card So. My question is that if I want to flash any ice from can I directly do it through CWM ie by clearing caches and instlalling from zip.
And can u plz give me the link of cm9rc1 from link which u said u didn't have any prob...and to apply this or any other ics based rom or jb rom what's the procedure.
PS: I donot want to come back to GB (restock) but just wanted a stable ics.
Sent from my GT-P1000 using xda app-developers app

I am not using CM9 RC1, so no, actually I said "I heard of no issue".
About restocking. I still recommend it.
You already come this far and manage to install CM9 RC1.
Others has no problem but you have.
Maybe restocking will clear the problem.

So u want me to come back to gb..OK I have seen that procedure, but what if wanted to flash other ics roms like aokp. Should I restock and then flash???
Sent from my GT-P1000 using xda app-developers app

actually, frankly speaking there should be no need to restock.
I just don't know why you face so much issue with CM9.
Yeah, try AOKP by Stimpz0r. I am using it myself.
Place the aokp build #40 and gapps in external sd.
Do the three wipes, (data, cache, dalvik).
Then flash aokp, then gapps.
Good luck.

So how ur experience
Btw can u give me the link??? Of aokp stable build
Sent from my GT-P1000 using xda app-developers app

Very stable.
For me everything works.
Go to
http://forum.xda-developers.com/showthread.php?t=1523174
look for the DOWNLOADS section

[Q] rom and kernel

** MOD EDIT: Thread closed at OP request **
hi guys
i'm new user of the galaxy s1 so my question is what's the best rom to use the stable version of cyanogenmod 9.1 or last nightly cm 10?
and what's the best kernel to use?
thanks in advance

midomad said:
hi guys
i'm new user of the galaxy s1 so my question is what's the best rom to use the stable version of cyanogenmod 9.1 or last nightly cm 10?
and what's the best kernel to use?
thanks in advance
Click to expand...
Click to collapse
Hmm. A lot of threads to read in the development section for you there are. Answers you will find.
-
But as I am kind:
I think the best beginner roms with great benefit are darkys roms. But since u have to flash cm9 to flash darkys v11 black, you can also stay with cm9.
I think the stable 9.1 is a good choice with either semaphore 1.3.0 kernel or devils 1.0.3 kernel.
Cm10 is still too unstable for me, but I am sure there are other opinions.
Sent from my GT-I9000 using xda app-developers app

moriansafas said:
Hmm. A lot of threads to read in the development section for you there are. Answers you will find.
-
But as I am kind:
I think the best beginner roms with great benefit are darkys roms. But since u have to flash cm9 to flash darkys v11 black, you can also stay with cm9.
I think the stable 9.1 is a good choice with either semaphore 1.3.0 kernel or devils 1.0.3 kernel.
Cm10 is still too unstable for me, but I am sure there are other opinions.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
thank you
now that i have instaled cm stable 9.1
is there any script to flash or kernel?
and what about memory do i need to install any script?

midomad said:
thank you
now that i have instaled cm stable 9.1
is there any script to flash or kernel?
and what about memory do i need to install any script?
Click to expand...
Click to collapse
In CM, you are flashing kernels, modems, mods - via CMW (flash zip from sdcard).
I think ICS - based roms don't need any memory tweaks.

midomad said:
thank you
now that i have instaled cm stable 9.1
is there any script to flash or kernel?
and what about memory do i need to install any script?
Click to expand...
Click to collapse
CM9.1's stock kernel works well.
IMHO If you're not looking for specific tweaks, you don't need to flash a different kernel.

what's about memory(storage)?
do i need to install anything to expand it?

midomad said:
what's about memory(storage)?
do i need to install anything to expand it?
Click to expand...
Click to collapse
Storage is physical memory. You have to buy a external microSD card or delete apps to get more.
If you are talking about ram: there are tweaks in the kernels mentioned above.
Sent from my GT-I9000 using xda app-developers app

Hi guys,
I'm running on CyanogenMod 9.1.
Which kernel i can use to overclock CPU? Is siyah kernel compatible with CM9??
Please help.