when i flash with PDA, PHONE and CSC file . then before flash must be flash with only pit ?
i can use any pit file with any firmware . note-{when i try flash .}
must be need flash pit file single . note-{before flash with PDA, PHONE and CSC file}
not possible PIT,PDA, PHONE and CSC . note-{same time }
i need help for it .
azim bahar said:
when i flash with PDA, PHONE and CSC file . then before flash must be flash with only pit ?
i can use any pit file with any firmware . note-{when i try flash .}
must be need flash pit file single . note-{before flash with PDA, PHONE and CSC file}
not possible PIT,PDA, PHONE and CSC . note-{same time }
i need help for it .
Click to expand...
Click to collapse
There's a good guide in the Overcome thread, their website contains all the files you need, step by step...
And next time you ask questions : 1x is enough... and patience will save you
Related
Hi, im flashing I9000JVJPJ which is 2.2.1 on my galaxy s and it has 3 files: PDA, Phone and Csc. Now i want to know if i should select repartition on ODIN for this file?
Thanks
yes,you should use 512.PIT for repartion
trustsyzaa said:
yes,you should use 512.PIT for repartion
Click to expand...
Click to collapse
So, you mean to say i select 512.PIT, PDA, PHONE, CSC files and repartition and flash the phone?
andrew21 said:
So, you mean to say i select 512.PIT, PDA, PHONE, CSC files and repartition and flash the phone?
Click to expand...
Click to collapse
That depends upon the instructions with the file to flash 3 part yes one part then its PDA .
jje
i download p1000 firmware but no have pit file only .
i can use any p1000 pit file with any p1000 firmware ?
if i try flash it 1st i need flash with pit file . 2nd need again flash with PDA, PHONE and CSC .
i need help & Answers about pit file .
Hi guys
need to return phone to stock O2 UK rom.
my internal sdcard is dead. but need to get rid of any root/flashing
found an O2 UK rom on samfirmware (I9000XWJVH_O2UJV3_BWJV2), but it only contains 1 file... jvh_jv3_jv2.tar
how do i flash 1 file with odin? im confused?
normally its pda, modem, csc, pit....
The same way you found the stock firmware.
go to the flashguide and download the guide for you're phone.
Flash the one file in the PDA option of Odin. If there is a pit file then flash with the pit file & repartition checked. If no pit file then flash with repartition unchecked.
If unsure find instructions on SamMobile as mentioned above.
ok cheers
it just confused me with 1 file.
Hi all! Need help: i update firmware for my SG Note from stock GB 2.3.6 to stock 4.0.3 Indian , now i cant write any symbols cuz then i try phone show me "null" . USSD *#1234# - CSC Unknown. How i can fix it? Cant find anywhere CSC SER region.
Thx for help!
sry for english )
How did you update? PC Odin? If so then the CSC would be inside that zip, it's the cache.img, flash it with PC Odin and it should solve your null issue
rename the tar.md5 to tar then open in winrar or 7 zip etc and get the cache image
ie N7000DDLP8_N7000ODDLP5_N7000DDLP4_HOME.tar
matius44 said:
How did you update? PC Odin? If so then the CSC would be inside that zip, it's the cache.img, flash it with PC Odin and it should solve your null issue
Click to expand...
Click to collapse
Yep by Odin 1.87. i already tried flash cache.img but Odin wants *.tar files and dosnt support *.img (or iam doing something wrong) . Btw, how flash CRC correct by PDA or by CSC field?
Shurey said:
Yep by Odin 1.87. i already tried flash cache.img but Odin wants *.tar files and dosnt support *.img (or iam doing something wrong) . Btw, how flash CRC correct by PDA or by CSC field?
Click to expand...
Click to collapse
Try with Mobile Odin, I believe it supports .img file since it has a cache field..
Copy the cache.img file to your sd card, open Mobile Odin and tap on cache and then navigate to where you copied the cache.img file. It should read it without issues
EDIT: Do you have root? Obviously you need root to use Mobile Odin but seeing you flashed a stock ROM I doubt you have root..
Try to find any ROM for your country that is not one file, there should be one that contains multiple .tar files, you'll find CSC.tar there. Sorry not helping very much here
Long story but I need to downgrade my i9000 from CM10 (currently on c-rom bean v2.3) back to stock 2.3.6 and couldnt find anything specific to the i9000 on to how to do it. Can I just get the stock firmware (ie PDA, CSC, Phone) and then flash through Odin? But I read on XDA (http://forum.xda-developers.com/showthread.php?t=1729458) that I may also need PIT and Bootloader? If so, where can I download these files??? Any help greatly appreciated!!!!
blion said:
Long story but I need to downgrade my i9000 from CM10 (currently on c-rom bean v2.3) back to stock 2.3.6 and couldnt find anything specific to the i9000 on to how to do it. Can I just get the stock firmware (ie PDA, CSC, Phone) and then flash through Odin? But I read on XDA (http://forum.xda-developers.com/showthread.php?t=1729458) that I may also need PIT and Bootloader? If so, where can I download these files??? Any help greatly appreciated!!!!
Click to expand...
Click to collapse
You have to download any 3 files stock ROM (I suggest you JVS, as JW versions can damage your IMEI), then select PDA, CSC and Phone
in ODIN. You don't have to have bootloader, as it is already in PDA, and yes, you have to have PIT file, it is usually within archive with ROM.
Just flash it and you're done. For download go to this thread: http://forum.xda-developers.com/showthread.php?t=1837223 and you'll find
there any ROM you want. Hope it will help you.
--
Leszek
twinsen.net said:
You have to download any 3 files stock ROM (I suggest you JVS, as JW versions can damage your IMEI), then select PDA, CSC and Phone
in ODIN. You don't have to have bootloader, as it is already in PDA, and yes, you have to have PIT file, it is usually within archive with ROM.
Just flash it and you're done. For download go to this thread: http://forum.xda-developers.com/showthread.php?t=1837223 and you'll find
there any ROM you want. Hope it will help you.
--
Leszek
Click to expand...
Click to collapse
Thanks for your prompt response. I am looking to go back to stock GB and last time I downloaded them from here (http://forum.xda-developers.com/showthread.php?t=1102881&page=1). I chose XWJW8/XWJW1/VAUJV9/Sbl (CSC: VAU (Vodafone)) as I live in Australia and my provider is Vodafone. But how do I extract the PIT file??
Also out of curiosity, what if I chose the stock rom of another network provider? Does it make a difference??
blion said:
But how do I extract the PIT file??
Also out of curiosity, what if I chose the stock rom of another network provider? Does it make a difference??
Click to expand...
Click to collapse
you cannot extract a PIT File, you can download a 512 PIT file from My Android Collections
If you use telstra , it will not work for vodafone and vice versa as they are branded
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
xsenman said:
you cannot extract a PIT File, you can download a 512 PIT file from My Android Collections
If you use telstra , it will not work for vodafone and vice versa as they are branded
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
Click to expand...
Click to collapse
Ok. So I take the 512 pit file from your link and also the official GB firmware from Ramad's thread. Then flash using Odin with only PIT, PDA, Phone and CSC. Also "re-partition", "Auto reboot" and "F Reset Time" needs to be ticked. Sorry about being so padantic but just wanted to make sure I get the steps right the first time. Thanks!!!
blion said:
Ok. So I take the 512 pit file from your link and also the official GB firmware from Ramad's thread. Then flash using Odin with only PIT, PDA, Phone and CSC. Also "re-partition", "Auto reboot" and "F Reset Time" needs to be ticked. Sorry about being so padantic but just wanted to make sure I get the steps right the first time. Thanks!!!
Click to expand...
Click to collapse
yup, that should do it mate.