Hi guys
need to return phone to stock O2 UK rom.
my internal sdcard is dead. but need to get rid of any root/flashing
found an O2 UK rom on samfirmware (I9000XWJVH_O2UJV3_BWJV2), but it only contains 1 file... jvh_jv3_jv2.tar
how do i flash 1 file with odin? im confused?
normally its pda, modem, csc, pit....
The same way you found the stock firmware.
go to the flashguide and download the guide for you're phone.
Flash the one file in the PDA option of Odin. If there is a pit file then flash with the pit file & repartition checked. If no pit file then flash with repartition unchecked.
If unsure find instructions on SamMobile as mentioned above.
ok cheers
it just confused me with 1 file.
Related
i have updated to DDJp6 via kies, now what i need to know is if i want to reflash the same firmware with odin..
there is one tar file named JP6_JP5_U_JP2, should i put the file in just pda or PDA,PHONE AND CSc all at a time together and then flash?
Use 813.pit and use the file in PDA only with Repartition unticked.
ok ill be rooting soon. what i also need to know is, if i root using clockworkmod, can i flash back to this firmware with odin?
This may be a dumb question, and I've looked around the forums, but can't find an answer.
I've downloaded KC1 for my Galaxy S, and the file I downloaded is I9000UGKC1_homebinary.tar
I looked inside the tar file and there is cache.rfs, factoryfs.rfs, modem.bin, param.lfs, etc
How do I flash these with Odin?
Thanks
what is the file used for? is it a modem? kernel ?
Well, I downloaded the firmware file for KC1 for the i9000 from samfirmware.com
I was wondering how to upgrade my phone to that, but it only had the one TAR file (and not the PHONE, PDA and MODEM files that other firmwares have).
So i'm not sure how I'm suppose to flash it.
oh!
well you place the file in the PDA tab in odin, and flash away (while repartition is UNCHECKED)
As per the instructions on Samfirmware in regard to flashing with odin .
jje
suppressor said:
oh!
well you place the file in the PDA tab in odin, and flash away (while repartition is UNCHECKED)
Click to expand...
Click to collapse
Thank You! I got stuck on that single file as well.
I've flashed onto my galaxy s 2.3.5 JVS firmware and im trying to flash onto that the official t-mobile firmware. i downloaded it off sam mobile website and the only file it gave was the pda. I flashed it onto my phone but it kept boot looping. im now going to try flashing it through mobile odin as the computer version caused the boot loop.
the file is JV9_JV7_JVO.tar
Does this flash need a pit file or just the pda?
thanks
You only need a .pit file if you have 3 files in your firmware pack and have repartition ticked in Odin.
Long story but I need to downgrade my i9000 from CM10 (currently on c-rom bean v2.3) back to stock 2.3.6 and couldnt find anything specific to the i9000 on to how to do it. Can I just get the stock firmware (ie PDA, CSC, Phone) and then flash through Odin? But I read on XDA (http://forum.xda-developers.com/showthread.php?t=1729458) that I may also need PIT and Bootloader? If so, where can I download these files??? Any help greatly appreciated!!!!
blion said:
Long story but I need to downgrade my i9000 from CM10 (currently on c-rom bean v2.3) back to stock 2.3.6 and couldnt find anything specific to the i9000 on to how to do it. Can I just get the stock firmware (ie PDA, CSC, Phone) and then flash through Odin? But I read on XDA (http://forum.xda-developers.com/showthread.php?t=1729458) that I may also need PIT and Bootloader? If so, where can I download these files??? Any help greatly appreciated!!!!
Click to expand...
Click to collapse
You have to download any 3 files stock ROM (I suggest you JVS, as JW versions can damage your IMEI), then select PDA, CSC and Phone
in ODIN. You don't have to have bootloader, as it is already in PDA, and yes, you have to have PIT file, it is usually within archive with ROM.
Just flash it and you're done. For download go to this thread: http://forum.xda-developers.com/showthread.php?t=1837223 and you'll find
there any ROM you want. Hope it will help you.
--
Leszek
twinsen.net said:
You have to download any 3 files stock ROM (I suggest you JVS, as JW versions can damage your IMEI), then select PDA, CSC and Phone
in ODIN. You don't have to have bootloader, as it is already in PDA, and yes, you have to have PIT file, it is usually within archive with ROM.
Just flash it and you're done. For download go to this thread: http://forum.xda-developers.com/showthread.php?t=1837223 and you'll find
there any ROM you want. Hope it will help you.
--
Leszek
Click to expand...
Click to collapse
Thanks for your prompt response. I am looking to go back to stock GB and last time I downloaded them from here (http://forum.xda-developers.com/showthread.php?t=1102881&page=1). I chose XWJW8/XWJW1/VAUJV9/Sbl (CSC: VAU (Vodafone)) as I live in Australia and my provider is Vodafone. But how do I extract the PIT file??
Also out of curiosity, what if I chose the stock rom of another network provider? Does it make a difference??
blion said:
But how do I extract the PIT file??
Also out of curiosity, what if I chose the stock rom of another network provider? Does it make a difference??
Click to expand...
Click to collapse
you cannot extract a PIT File, you can download a 512 PIT file from My Android Collections
If you use telstra , it will not work for vodafone and vice versa as they are branded
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
xsenman said:
you cannot extract a PIT File, you can download a 512 PIT file from My Android Collections
If you use telstra , it will not work for vodafone and vice versa as they are branded
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
Click to expand...
Click to collapse
Ok. So I take the 512 pit file from your link and also the official GB firmware from Ramad's thread. Then flash using Odin with only PIT, PDA, Phone and CSC. Also "re-partition", "Auto reboot" and "F Reset Time" needs to be ticked. Sorry about being so padantic but just wanted to make sure I get the steps right the first time. Thanks!!!
blion said:
Ok. So I take the 512 pit file from your link and also the official GB firmware from Ramad's thread. Then flash using Odin with only PIT, PDA, Phone and CSC. Also "re-partition", "Auto reboot" and "F Reset Time" needs to be ticked. Sorry about being so padantic but just wanted to make sure I get the steps right the first time. Thanks!!!
Click to expand...
Click to collapse
yup, that should do it mate.
Hi
I am having a little bit of trouble going back to stock. I currently run the latest cm10 nightly, which repartitions your phone, right? So i want to go back to stock, but am confused. I have a 803 pit file which i believe i need to flash. Now the firmware package i have (from sammobile.com, correct one for my region) is all one tar file. Does not contain files that odin can flash, so in which one (pda, boot, modem etc.) do i need to put that file? It contains a load of .bin and .rfs files. Also, reading this guide: http://forum.xda-developers.com/showthread.php?p=7152078#post7152078 it tells me not to flash the pit with the one package file i have, so what is the exact procedure?
Thanks in adavnce!
The package you have is the PDA if is only one don't insert a pit and don't tick repartition,only put the file In the pda
Inviato dal mio GT-I9000 con Tapatalk 2
race55 said:
Hi
I am having a little bit of trouble going back to stock. I currently run the latest cm10 nightly, which repartitions your phone, right? So i want to go back to stock, but am confused. I have a 803 pit file which i believe i need to flash. Now the firmware package i have (from sammobile.com, correct one for my region) is all one tar file. Does not contain files that odin can flash, so in which one (pda, boot, modem etc.) do i need to put that file? It contains a load of .bin and .rfs files. Also, reading this guide: http://forum.xda-developers.com/showthread.php?p=7152078#post7152078 it tells me not to flash the pit with the one package file i have, so what is the exact procedure?
Thanks in adavnce!
Click to expand...
Click to collapse
If you have one file .tar choose it on bootloader and select auto reboot and f.reset time.:good: