Hi, im flashing I9000JVJPJ which is 2.2.1 on my galaxy s and it has 3 files: PDA, Phone and Csc. Now i want to know if i should select repartition on ODIN for this file?
Thanks
yes,you should use 512.PIT for repartion
trustsyzaa said:
yes,you should use 512.PIT for repartion
Click to expand...
Click to collapse
So, you mean to say i select 512.PIT, PDA, PHONE, CSC files and repartition and flash the phone?
andrew21 said:
So, you mean to say i select 512.PIT, PDA, PHONE, CSC files and repartition and flash the phone?
Click to expand...
Click to collapse
That depends upon the instructions with the file to flash 3 part yes one part then its PDA .
jje
Related
Hi, I got the JPY ROM from the thread in the general discussion, and any time i have tried to flash it onto my phone, the phone refuses to start properly. It just vibrates a couple of times and black screens.
I am using Odin 1.3 and PIT 512 for this as it says on SamFirmware.com.
Is this the ROM not working properly, or me doing something wrong?
Mate did you click repartition in odin?If you did then you SHOULDNT!!!!
Try to get in to recovery mod with the 3 button combo and make a factory reset if yo had NOT clicked repartition.
In case had HAD clicked repartition in Odin then i guess you ll have to download a foul stock firmware and flash it.Meaning a firmeare that has Modem and CSC files aswell and not only PDA file...
I'm just about to flash XXJPY and I was just wondering, do I have to unroot 'before' flashing the single file (pda) XXJPY or can I leave it as is..?? Does it make any difference..??
Thanks
tackygr said:
Mate did you click repartition in odin?If you did then you SHOULDNT!!!!
Try to get in to recovery mod with the 3 button combo and make a factory reset if yo had NOT clicked repartition.
In case had HAD clicked repartition in Odin then i guess you ll have to download a foul stock firmware and flash it.Meaning a firmeare that has Modem and CSC files aswell and not only PDA file...
Click to expand...
Click to collapse
haha, thanks mate, i forgot to try that, i'll give it a go later.
topcat888 said:
I'm just about to flash XXJPY and I was just wondering, do I have to unroot 'before' flashing the single file (pda) XXJPY or can I leave it as is..?? Does it make any difference..??
Thanks
Click to expand...
Click to collapse
nah you dont need to have it rooted to flash JPY.
I believe the JPY file in the general forum is just an upgrade / high level package which is why you dont tick repartition. Usually look for posts by Richthofen- hes the dude who converts it to mid level packages so you can couple it with a CSC and modem.
hi there same thing happened to me i updated this thru samsung kies im stock at black screen would factory reset make my phone work again? i need help please please please
dopeee said:
nah you dont need to have it rooted to flash JPY.
I believe the JPY file in the general forum is just an upgrade / high level package which is why you dont tick repartition. Usually look for posts by Richthofen- hes the dude who converts it to mid level packages so you can couple it with a CSC and modem.
Click to expand...
Click to collapse
I am already rooted so should I un-root before flashing or just leave it rooted..???
And also have SGS Battery Icon Mod installed, again does this have to be un-installed before flash or not..??
Can someone post a link to the right ROM that I can use to update using ODIN that will not result in existing data lost ? The one that I downloaded is a single tar file (Size - 298,890KB) that contains these files. If this is the right file, do i just specify the tar file in the PDA and uncheck repartition ?
modem.bin
param.lfs
zimage
cache.rfs
factoryfs.rfs
Guys
I installed CM 7 successfully on my SGS using instructions here
http://www.galaxyroot.com/rom-cyanogenmod-7-for-galaxy-s-non-official/
It installed perfectly but i m not having signal. So i flashed back original JPY using ODin but phone is stuck on galaxy logo. Please advice on how to revert to original ROM?
Thanks
did you use PIT and check REPARTITION when you flashed back to JPY ??
azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
No as i have one file only JPY_JPY_JPY.tar
azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
As per Odin tutorial i select Pit and repartition only when i have 3 files. Can you please advice where can i get 3 files as i have one file only from samfirmware?
My I9000 is international and factory unlocked....
right well were gunna need a 3 file firmware in order to use PIT. bear with me whilst i have a look for one.
probably samfirmare.com ?
yeah just been looking on there they all seem to be 1 file
Yes samfirmware.com has 1 files only.
Are you sure if i flash with 3 files and select repartition then it will solve my problem?
install another firmware like jpjpa with 3 files and then flash xxjpy on it
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Will kies be of any help if i put phone in download mode and attach it with kies?
well im looking at a site that says do re partition with 1 file but its not recommended. http://androidadvices.com/update-samsung-galaxy-s-gt-i9000-to-froyo-xxjpy-2-2-1/
re partition should fix the problem,
zeeshee said:
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Click to expand...
Click to collapse
WOOHOO !!!! you found it lol been searching for that with no luck. if XDA says it will work.... it will work lol i have faith in XDA
How to get three files as it is only 1 exe file?
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
azzledazzle said:
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
Click to expand...
Click to collapse
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
zeeshee said:
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
Click to expand...
Click to collapse
i dont know try renaming it. im downloading it myself now so i can see whats going on
ok its self ecxtrating file..
it gave me following 2 files only
CODE_I9000XXJPU.tar.md5
MODEM_I9000XXJPU.tar.md5
Are these phone and CSC for oDin? What about PDA?
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
azzledazzle said:
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
Click to expand...
Click to collapse
Thanks. Odin is updating now.. Hope it works once done.
This may be a dumb question, and I've looked around the forums, but can't find an answer.
I've downloaded KC1 for my Galaxy S, and the file I downloaded is I9000UGKC1_homebinary.tar
I looked inside the tar file and there is cache.rfs, factoryfs.rfs, modem.bin, param.lfs, etc
How do I flash these with Odin?
Thanks
what is the file used for? is it a modem? kernel ?
Well, I downloaded the firmware file for KC1 for the i9000 from samfirmware.com
I was wondering how to upgrade my phone to that, but it only had the one TAR file (and not the PHONE, PDA and MODEM files that other firmwares have).
So i'm not sure how I'm suppose to flash it.
oh!
well you place the file in the PDA tab in odin, and flash away (while repartition is UNCHECKED)
As per the instructions on Samfirmware in regard to flashing with odin .
jje
suppressor said:
oh!
well you place the file in the PDA tab in odin, and flash away (while repartition is UNCHECKED)
Click to expand...
Click to collapse
Thank You! I got stuck on that single file as well.
What if I am on Stock ICS and want to go to stock GB, Should I use pit file + 3 .tar files for Odin?
Especially pit file... What I mean, Do I need to re-partiiton?
ardicli2000 said:
What if I am on Stock ICS and want to go to stock GB, Should I use pit file + 3 .tar files for Odin?
Especially pit file... What I mean, Do I need to re-partiiton?
Click to expand...
Click to collapse
No, you don't use a pit file.
ardicli2000 said:
What if I am on Stock ICS and want to go to stock GB, Should I use pit file + 3 .tar files for Odin?
Especially pit file... What I mean, Do I need to re-partiiton?
Click to expand...
Click to collapse
Reboot into download mode
Connect your phone to pc
Select the downloaded file under PDA tab
Start flash
Phone will reboot
After phone started
Now disconnect the cable.
Reboot into recovery
Wipe cache/dalvik
Reboot system.
Sent from my GT-N7000 using xda app-developers app
Long story but I need to downgrade my i9000 from CM10 (currently on c-rom bean v2.3) back to stock 2.3.6 and couldnt find anything specific to the i9000 on to how to do it. Can I just get the stock firmware (ie PDA, CSC, Phone) and then flash through Odin? But I read on XDA (http://forum.xda-developers.com/showthread.php?t=1729458) that I may also need PIT and Bootloader? If so, where can I download these files??? Any help greatly appreciated!!!!
blion said:
Long story but I need to downgrade my i9000 from CM10 (currently on c-rom bean v2.3) back to stock 2.3.6 and couldnt find anything specific to the i9000 on to how to do it. Can I just get the stock firmware (ie PDA, CSC, Phone) and then flash through Odin? But I read on XDA (http://forum.xda-developers.com/showthread.php?t=1729458) that I may also need PIT and Bootloader? If so, where can I download these files??? Any help greatly appreciated!!!!
Click to expand...
Click to collapse
You have to download any 3 files stock ROM (I suggest you JVS, as JW versions can damage your IMEI), then select PDA, CSC and Phone
in ODIN. You don't have to have bootloader, as it is already in PDA, and yes, you have to have PIT file, it is usually within archive with ROM.
Just flash it and you're done. For download go to this thread: http://forum.xda-developers.com/showthread.php?t=1837223 and you'll find
there any ROM you want. Hope it will help you.
--
Leszek
twinsen.net said:
You have to download any 3 files stock ROM (I suggest you JVS, as JW versions can damage your IMEI), then select PDA, CSC and Phone
in ODIN. You don't have to have bootloader, as it is already in PDA, and yes, you have to have PIT file, it is usually within archive with ROM.
Just flash it and you're done. For download go to this thread: http://forum.xda-developers.com/showthread.php?t=1837223 and you'll find
there any ROM you want. Hope it will help you.
--
Leszek
Click to expand...
Click to collapse
Thanks for your prompt response. I am looking to go back to stock GB and last time I downloaded them from here (http://forum.xda-developers.com/showthread.php?t=1102881&page=1). I chose XWJW8/XWJW1/VAUJV9/Sbl (CSC: VAU (Vodafone)) as I live in Australia and my provider is Vodafone. But how do I extract the PIT file??
Also out of curiosity, what if I chose the stock rom of another network provider? Does it make a difference??
blion said:
But how do I extract the PIT file??
Also out of curiosity, what if I chose the stock rom of another network provider? Does it make a difference??
Click to expand...
Click to collapse
you cannot extract a PIT File, you can download a 512 PIT file from My Android Collections
If you use telstra , it will not work for vodafone and vice versa as they are branded
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
xsenman said:
you cannot extract a PIT File, you can download a 512 PIT file from My Android Collections
If you use telstra , it will not work for vodafone and vice versa as they are branded
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
Click to expand...
Click to collapse
Ok. So I take the 512 pit file from your link and also the official GB firmware from Ramad's thread. Then flash using Odin with only PIT, PDA, Phone and CSC. Also "re-partition", "Auto reboot" and "F Reset Time" needs to be ticked. Sorry about being so padantic but just wanted to make sure I get the steps right the first time. Thanks!!!
blion said:
Ok. So I take the 512 pit file from your link and also the official GB firmware from Ramad's thread. Then flash using Odin with only PIT, PDA, Phone and CSC. Also "re-partition", "Auto reboot" and "F Reset Time" needs to be ticked. Sorry about being so padantic but just wanted to make sure I get the steps right the first time. Thanks!!!
Click to expand...
Click to collapse
yup, that should do it mate.