Well I'm running cm9 0.5 and I got six axis to work and it connects yet none of the controls work and I got profiles from the right place the only buttons that work are the anolog and the up and down left and right buttons anyway to fix this?
Anyone Know???/
I had the same problem would love to know.
Sent from my cm_tenderloin using xda premium
Assuming you're talking about touch profiles, the first thing to check is whether any touches are being sent by the app. The best way to do this is to download 'Touch Test' or similar from the market, connect the controller and activate the touch profile, then run 'Touch Test' and press some buttons on the controller. If any output shows up, it's likely that the profile you're using has been configured for a different control scheme or a device with a different resolution. If no output shows up let me know and I'll see if I can come up with some more possibilities!
^Do what this blessed man says. He is the developer!
Just came in from work I'm going to give this a shot in a few minutes. Will post the results. Thanks for the help.
Sent from my cm_tenderloin using xda premium
Hey, i got an even worse problem.. once i use any button on my sixaxis whilst using the active touch profile my phone stops recognizing any touch input and i have to reboot it in order to use it..
currently running cm9 on sgs2
Tried out the touch test and its working. Thanks a lot bro!
Sent from my cm_tenderloin using xda premium
i got some news to add:
i enabled the touch indicator of the android system and whenever i touched a button or moved a stick, the sixaxis app seamed to permanently simulate a touch on the screen. that must be the reason for the touchscreen freeze. on the newest cm9 (02012012) i managed to unfreeze it by multitouching around that permanent dot.
if anyone has a solution, plz let me know.
though its not that bad for me since i just wanted to test the active touch profile, bc im getting my transformer prime soon (and afaik there are no issues with sixaxis) i think this occurs on many ppl using cm9 on sgs2, asking for help!
Related
Ok so i am trying to determine what my problem is.. here are the symptoms. When i try and end a call i sometimes have to press multiple times or deliberately press and hold the end button and sometimes it doesn't respond pretty much at all. Also i am using go launcher and when i press icons that are in the dock bar they have the same issues. I also have similar issues when i text it's really annoying so is anyone else have similar issues?
Sent from my VS910 4G using XDA App
Same here. I've noticed that to hang up it takes a deliberate double tap. Also, the screen will sometimes become inoperable requiring a reboot. This has happened three times since first getting it. One note if that out happened twice stock, and once with decrapped 1.1
Any body else seen this?
Sent from my VS910 4G using XDA Premium App
I haven't seen it anywhere else, but I have seen the double tap on the end button to end a call. Seems to happen frequently. A "feature?"
Either way, it's annoying.
Running Go Launcher as well.
To me, it seems like it takes the screen a really long time to wake up from being off, in all cases - for example, dial voicemail and put the phone to your ear. When you get the prompt to put in your PIN, take it away and the screen comes on, try to punch the dialpad button immediately and it just won't work. I tried it as I was writing this and had to triple tap the button.
Same thing with the lockscreen (still on the stock lockscreen for now). The screen will wake up and it takes a second or two to even start to register finger swipes. It's really annoying...
Speaking of phone lockup, I received a call a few days ago and the phone froze - I couldn't answer the call, or do anything, all the while the phone just kept ringing. Had to pull the battery. I'm still on the stock ROM.
Me too! I had a call and it froze. Battery pull as well. Also, forgot to mention I am using open home launcher.
Sent from my VS910 4G using XDA Premium App
Yep it's a bug either in LG's function to turn on and off the screen in Android, or the kernel drivers that enable/disable the touchscreen. There is about a 1 second delay to it.
I discovered this lovely bug while porting the AOSP lockscreen mod.
I'll run some more tests to see whether it's an android bug or a kernel bug. I'm betting it's android (something like the screen being turned on before the touch controller has had time to reinitialize itself, or something more complicated like a race condition of some kind...)
Either way, with cm7 around the corner, I don't think it's that big of a bug
thecubed said:
Either way, with cm7 around the corner, I don't think it's that big of a bug
Click to expand...
Click to collapse
Errrr Are you sure the Revo is getting CyanogenMod 7? Where did you hear this and more importantly when will we get it?
AndroidCraig said:
Errrr Are you sure the Revo is getting CyanogenMod 7? Where did you hear this and more importantly when will we get it?
Click to expand...
Click to collapse
Since he is the one working on getting it ported over, I think he has the best idea, and the only rule of cm is no asking for etas ;-)
Sent from my VS910 4G using XDA Premium App
Hi togeter,
didnt found something related to the issue, that the latest Nightliys #56 no headset button commands accept.
is there a solution?
Thanks a lot
What exactly doesnt work? If you can see the headset icon, but get no sound, try to start music without headset plugged in, then plug it in. Did the trick for me, if any other issue, pls explain more precise, what you mean...
Sent from my LG-P970 using Tapatalk
Sound works, i can hear everything but the button volume, next.... didnt work
Sent from my LG-P970 using XDA App
The headset button Never worked...
Sent from my LG-P970
I tryed some apps from market wich emulate the headset button commands but without success. Did anybody found a solution to use this buttons?
Sent from my LG-P970 using XDA App
Nobody cares for that button, even the G button doesn't work for anything as default, maybe you can look in the keyboard file (forgot what is the name) and assign it from there, but that is more risky as involves know how code and stuff like that.
Sent from my LG-P970
It's not that difficult, just check this site here http://forum.xda-developers.com/showthread.php?t=695936 and then change the settings with the ones, we already have got, it's somewhere in system/usr/, dont remember the exact path... Just check out the files in there, one of them should be similar to the one in the thread i posted above
Hi ppl. I recently encountered this problem and Hv searched a lot but couldn't find a proper solution.
I pulled my Ph out of my pocket and had the pocket sensor app installed back then and the phone was getting locked and unlocked but I couldn't bypass the lock screen since the touch screen wouldn't respond. I could see everything else on the notification bar working like the gprs arrows and I even got a call when this happened but couldn't pick the call up too. The only way I could get out of it was to take the battery out. Now its been happening often and I heard the emmc chip gets fried if u keep taking the battery out when the Ph is on. Anyone else facing a similar problem??
I am rooted on 2.3.5
Sent from my HTC Incredible S using XDA
FCArsenal said:
Hi ppl. I recently encountered this problem and Hv searched a lot but couldn't find a proper solution.
I pulled my Ph out of my pocket and had the pocket sensor app installed back then and the phone was getting locked and unlocked but I couldn't bypass the lock screen since the touch screen wouldn't respond. I could see everything else on the notification bar working like the gprs arrows and I even got a call when this happened but couldn't pick the call up too. The only way I could get out of it was to take the battery out. Now its been happening often and I heard the emmc chip gets fried if u keep taking the battery out when the Ph is on. Anyone else facing a similar problem??
I am rooted on 2.3.5
Sent from my HTC Incredible S using XDA
Click to expand...
Click to collapse
Did u try to lock n unlock it via the on/off button on top when it not responding?..
Sent from my HTC Incredible S using xda premium
I had major problems when I was on 2.3.3 stock unrooted.
I had a lot of crap on it so maybe that was the problem.
Are you on a custom rom? If youre not, I would probably try a gingerbread custom rom and see if it still happens.
Also if you are scared of taking the battery out, you can hold power+vol down+vol up at the same time for a few seconds, and it will reboot
Try not to use that apps. See whether the same thing happen again or not.
Sent from my HTC Incredible S
Yes McIero. I tried the power button but it doesn't help. TX anyway
Sent from my HTC Incredible S using XDA
FCArsenal said:
Yes McIero. I tried the power button but it doesn't help. TX anyway
@marcj338 yeah am on the rooted 2.3.3 rom. Did u Hv similar problems with this rom?? It happens sometimes but when it does it really gets annoying grrr. Am waiting for ics to come out n hopefully it will fix it.
Sent from my HTC Incredible S using XDA
Click to expand...
Click to collapse
Sent from my HTC Incredible S using XDA
FCArsenal said:
Sent from my HTC Incredible S using XDA
Click to expand...
Click to collapse
Have you tried a factory reset?
I had it on unrooted stock optus rom.
I would change to a more optimised rom like ARHD or something
@nonverbose
I don't think it is that big of an issue for a factory reset but it happened again today and was fine after a few mins. Would you come to know what is causing this if I sent some kind of an error log or something. If yes pl tell me what I need to send. @marcj338
Does ARHD have internet pass through? I use my office network to download big games,etc so I need the feature. Hows ARHD better than the stock anyway?
Sent from my HTC Incredible S using XDA
FCArsenal said:
Does ARHD have internet pass through? I use my office network to download big games,etc so I need the feature. Hows ARHD better than the stock anyway?
Click to expand...
Click to collapse
Not sure about the internet pass through because I have never tried to use it so I dont know if its there
It is much smoother, Ive played with stock 3.0 and it lags and is a bit choppy
When I used ARHD, I found it a LOT smoother than stock, it has better battery life, and it more optimised. Even with OC is lasts longer. I would have kept it, but I didn't like the look of stock 3.0 compared to runnymede ports
FCArsenal said:
@nonverbose
I don't think it is that big of an issue for a factory reset but it happened again today and was fine after a few mins. Would you come to know what is causing this if I sent some kind of an error log or something. If yes pl tell me what I need to send. @marcj338
Does ARHD have internet pass through? I use my office network to download big games,etc so I need the feature. Hows ARHD better than the stock anyway?
Sent from my HTC Incredible S using XDA
Click to expand...
Click to collapse
The reason I suggested a factory reset is because I think you're experiencing major lag spikes, possibly due to background running tasks. Does it always happen when you have this pocket sensor app activated?
@markj338
I wanted to try out ARHD for a while but was unimpressed by CM so I thought of sticking to stock but later when I checked my friends Ph and saw the difference I wanted to go for it but now I think am gonna wait for ics cos I heard it's very stable. TX for ur time though! Appreciate it ..
@nonverbose
I think it's the pocket sensor but am not sure. I try out various combinations to get outta it. Sometimes I think its the go locker but I noticed 1 thing for sure ....it happens when it's really hot outside and the battery heats up too. Am trying to give as much info as possible!!
Sent from my HTC Incredible S using XDA
Wow.....everytime I try to determine the problem as to why this is happening I come up with random ideas since noting used to work. Now on my way to work the same thing happened again. It is still not responding and am posting this from my office computer. I could unlock the go lock screen by the vol button which I had configured. I could see the internet pages loading up since I was browsing when it happened suddenly. The auto rotation also works and all buttons like home, menu, search are responding but it just doesnt seem to respond when I touch the screen. I googled it and found there is something called a touch input which might be and issue. I cant do anything to stop and restart the service since the touch doesnt work. Any suggestions?
Uninstall pocket sensor and go locker.
Really ...y do you think they are the problem.
Sent from my HTC Incredible S using XDA
FCArsenal said:
Really ...y do you think they are the problem.
Sent from my HTC Incredible S using XDA
Click to expand...
Click to collapse
You asked for suggestions. Its a process of elimination.
FCArsenal said:
Really ...y do you think they are the problem.
Sent from my HTC Incredible S using XDA
Click to expand...
Click to collapse
Check where exactly is the proximity sensor and make sure nothing is blocking it (dirt) and/or is still exactly where it should be (if you drop a phone it might get dislocated). This would explain sudden unresponsiveness since phone might think it is in call mode (proximity sensor detects presence of your head and disables the screen while you are dialling).
I had go launcher n pocket sensor way before this started happening. I don't think that's the problem. Its something to do with the touch input but can't figure out the cause.
N yeah I remember dropping it once. My SD card is almost full since I got a lotta media n apps. Would buying a new high capacity SD card do the trick? I remember my laptop lagging due to an almost full hard disk ...
Sent from my HTC Incredible S using XDA
It happened again today. I received some bluetooth files and its not responding now. Menu buttons work but the touch is being a *****. It happens so randomly n it not even funny. grrrr
Seems like, few days after changing my usb conector port, my g sensor failed.:thumbdown::banghead: tried everything like format boot, install various roms, factory reset, etc. Now I'm using arhd rom and g senzor still not working. Found an app called rotation locker and I wish to put a shortcut of it on notification bar, so I can have access on it all the time when I want to use landscape mode. Is there any way to do it?
Also, if someone knows a way to fix my g sensor I would apreciate.
Sent from my HTC Incredible S using xda app-developers app
Found rotate app in the market and it's runing in background on nav bar. It's a great temporary solution. Thanx for support.
Sent from my HTC Incredible S using xda app-developers app
Have you tried calibrating your g-sensor? You might have unplugged it when you changed your USB port.
The bubles moves only when I hit calibrate. Do you have any idea where is the sensor? Cause I. 've pluged in everything
Sent from my HTC Incredible S using xda app-developers app
Try to recheck the ribbons, here is the manual
https://dl.dropbox.com/u/68923799/HTC Incredible S Dissassembly - Reassembly.pdf
I've opened the phone once to change the USB port too, but as far as I remember all ribons that you detach should only LCD related, unless when you open it something went wrong. Just recheck with the manual
Thx for the manual. I opened the phone, cleaned it, putted every litle thing togeter and........ Still dead. Nothing works. It's faulty or i am blind.
Sent from my HTC Incredible S using xda app-developers app
Does anyone know what determines whether the softkeys vibrate on touch? Turning volume down to silent doesn't change anything but I've noticed that sometimes there is no vibration and I can't figure out the reason.
Sent from my Xperia Z using Tapatalk
There is an option to turn it off in the sound settings,vibrate on touch.
Sent from my C6602 using xda premium
But there's been many times when I've not been near any settings for a while and I notice the soft keys not vibrating.
Sent from my Xperia Z using Tapatalk
I don't know if it's a software or hardware problem.can you try a factory reset?or repair the phone via pc companion.
Sent from my C6602 using xda premium
Firstly I'll monitor exactly what I'm doing when it next happens. I'm not rooted or unlocked yet so I guess it's nothing I've done (unless it's an app, if that's possible)
Sent from my Xperia Z using Tapatalk
Right, so it's been almost a week. Unfortunately, I'm still having problems with no obvious explanation.
I soft-bricked my phone a few days ago so I've completely reset it. I was under the impression that it was only softkeys and haptic feedback that was being lost but today I'm sure a couple of time I've received messages without vibration (phone was in my lap and I can see the screen turn on but felt nothing).
My friend on his One X told me he often loses softkey feedback and haptics but that a message always brings it back. So until today I was putting it down to Jellybean (there seems to be a lot of S3 users with same issues too). Some S3 user reported that turning battery saving off has brought back feedback but I've not used stamina or anything like that, might there be something enabled by default I want to get rid of?
I kinda want to install CM10.1 to test on 4.2 but I'd need unlocked bootloader and I'm not sure how Amazon feel about that.
The motor seems to be ok... It sounds like a Bee or some paper trapped but from what I read that's normal because it's a thin phone. It's loud too.
When using the Service Tests area it seems to work without fail, but I need to test that after it turns off.
I'm still having this issue and I'm almost certain it must be a hardware fault.
Am I right in thinking that if I run a vibration test in the service menu then no system or app settings should prevent it vibrating?
Sometimes it fails to vibrate even in that test.
Sent from my C6603 using Tapatalk 2