CRT Off animation for EL30 - Epic 4G Themes

Since I couldn't find one, I decided to make it and share!
Flashing with ClockworkMod 5.0.2.7. I've only tested this on my own stock / BML / EL30 Epic, and MTD EL30 SleeperRom - I don't get any system crashes unlike the EI22 one I tried before. Make a nandroid backup just in case, and wipe your Dalvik cache after flashing, but this should work on odexed and deodexed roms just fine. Be sure to push thanks, Thanks!
Updated for FC09 here:
http://forum.xda-developers.com/showthread.php?t=1664881

Thanks,
I was trying to do the same thing. I've never cooked up a rom, but it really didn't seem too difficult. As far as I could tell all I had to do was decompile the framework-res.apk, modify one line of code, recompile, and reinstall. Every step was a pain, and I never got it to boot. Glad you got did this.
If you feel like posting the steps you used I'd be interested to see where I went wrong.

harwood0808 (thanks for testing & pushing the Thanks button!) installed this on MTD EL30 SleeperRom and it worked just fine - cool! I figured it would, but you know what happens to people that assume, heh.

poit said:
Thanks,
I was trying to do the same thing. I've never cooked up a rom, but it really didn't seem too difficult. As far as I could tell all I had to do was decompile the framework-res.apk, modify one line of code, recompile, and reinstall. Every step was a pain, and I never got it to boot. Glad you got did this.
If you feel like posting the steps you used I'd be interested to see where I went wrong.
Click to expand...
Click to collapse
That is mostly what I did using this guide as a reference point:
http://www.freeyourandroid.com/guide/enable-crt-animation
I'm on a Mac, and spend most of my time in Terminal, so once I saw what was required it wasn't too difficult - the most time consuming part was everything else.

If I flash this will it undo all the custom theme icons and such?

radugb said:
If I flash this will it undo all the custom theme icons and such?
Click to expand...
Click to collapse
Yes
Sent from my SPH-D700 using Tapatalk

hmm, doing this made my phone reboot non-stop D:
what could of gone wrong.?

baped said:
hmm, doing this made my phone reboot non-stop D:
what could of gone wrong.?
Click to expand...
Click to collapse
Yikes, what rom are you running, is it MTD or BML, is it odexed or deodexed, stock, TouchWiz based or CM7 based? What other mods have you flashed?

ss4rob said:
Yikes, what rom are you running, is it MTD or BML, is it odexed or deodexed, stock, TouchWiz based or CM7 based? What other mods have you flashed?
Click to expand...
Click to collapse
I have currently no roms or anything just stock for the moment,(got a fresh phone again) guessing it will only work with a rom for now huh

baped said:
I have currently no roms or anything just stock for the moment,(got a fresh phone again) guessing it will only work with a rom for now huh
Click to expand...
Click to collapse
I'm straight up rooted stock with CWM 5.0.2.7 - no problems here. Did you clear your Dalvik cache before or after you flashed this zip? Make a Nandroid and try again, making sure to clear Dalvik cache before flashing (FYI, I cleared Dalvik cache after flashing and had no problems) . Good luck!

I used acs, I did clear my dalvik before installing, :l
Sent from my SPH-D700 using XDA App

i got an issue, i flashed the zip in cwm and wiped dalvik booted the phone and i noticed my notification bar was gone, crt off is working just notification and status are gone
stock rooted,deodexed,bml,el30

Tried everything on the thread, tried wiping dalvik before and after flashing I tried new downloads and repeating the step and I still can't get it to work. I'm stock rooted deoxed and using MTD. Any suggestions?!

Please forget what I said ^^^ I forgot to mount system and when I did everything worked thanks for the animation!
Sent from my MTD Epic using xda premium

baped said:
I used acs, I did clear my dalvik before installing, :l
Click to expand...
Click to collapse
I guess the ACS rom has something conflicting with this stock framework-res - my apologies for it not working for you. :-/
regie2k3 said:
i got an issue, i flashed the zip in cwm and wiped dalvik booted the phone and i noticed my notification bar was gone, crt off is working just notification and status are gone
stock rooted,deodexed,bml,el30
Click to expand...
Click to collapse
Try flashing again - since this mod works on SleeperRom which is deodexed, it should work on your stock deodexed rom as well. Good luck.

I have a question, can the CRT effect be colored? Red, blue, etc?
thanks for the work.

sneezy316 said:
I have a question, can the CRT effect be colored? Red, blue, etc?
thanks for the work.
Click to expand...
Click to collapse
You can change the color of the over scroll glow and the status bar, but I don't think you can change the color of the CRT off animation, or at least not the way I'm doing it. That would be cool though, make it burn-in green, heh.

I updated this for stock FC09 here:
http://forum.xda-developers.com/showthread.php?t=1664881
I'll update the OP as well.

Related

[BOOT] Android Scribble Boot Animation/Shutdown - Edify/Amend

*UPDATE 2/2/11* Added flashable shutdown animation. See bottom of OP.
Credit to Gla'DOS for original animation.
Requirements:
- Any ROM with a kernel that supports custom boot animations (Bonsai4All, ViperROM, etc)
- Ability to boot into ClockWorkMod Recovery (any version) and flash a .zip file
What is it?
- I modified the original animation, removed the light flare, and added loading status indicators under the animation.
- Increased playback length with repeating loading status indicators.
PREVIEW
Instructions:
- Download .zip to SD Card
- Flash in CWM (all versions of CWM supported)
DOWNLOAD
2/2/11: Added shutdown animation
DOWNLOAD
Nice.............
ecooce said:
Nice.............
Click to expand...
Click to collapse
So you got it to flash? (received email notification of your original reply)
Sent from my Bonzai'd Epic 4g.
Thanks for this! Nice
love this!! .. would it be possible to get a shutdown animation too? cause there's one here http://forum.xda-developers.com/showpost.php?p=10926995&postcount=4 but it's not compatible with cwm3, nor does it have your customizations which I love.
Thanks
BlackPearl890 said:
love this!! .. would it be possible to get a shutdown animation too? cause there's one here http://forum.xda-developers.com/showpost.php?p=10926995&postcount=4 but it's not compatible with cwm3, nor does it have your customizations which I love.
Thanks
Click to expand...
Click to collapse
Thanks for reminding me! I had originally intended to do just that, but completely spaced it. I've attached it here and updated the OP. Certain kernel limitations forced me to shorten the sequence.
leatherneck6017 said:
Thanks for reminding me! I had originally intended to do just that, but completely spaced it. I've attached it here and updated the OP. Certain kernel limitations forced me to shorten the sequence.
Click to expand...
Click to collapse
Nice! I'll flash now & let you know how it works thnx!
Sent from my Epic4G using Tapatalk
shutdown works perfect! love it!! thanks!!!
why am I dumb?
I can't ever get any of these to work...I install custom ROM's and widget mod's through CWM3 all the time, and boot ani's just never seem to work. I'm running Viper ROM now. I've downloaded the .zip, boot into recovery, choose install .zip, go to the file, install it....system says, it was installed properly, reboot..same boot screen as before.
what am I missing?
UPDATE: The shutdown loaded correctly, and it's awesome....still having issues with the bootup though. harumph.
This worked, but then I started getting a bunch of FC's. Then I ran ROM Manager permissions fix and it got rid of most of the FC's except for google framework which is very important. I have no idea how this could have caused these issues. But after restoring my nandroid backup (Thank God I backed up!) everything was back to normal.
DeeODoubleD said:
This worked, but then I started getting a bunch of FC's. Then I ran ROM Manager permissions fix and it got rid of most of the FC's except for google framework which is very important. I have no idea how this could have caused these issues. But after restoring my nandroid backup (Thank God I backed up!) everything was back to normal.
Click to expand...
Click to collapse
what is ROM Manager permissions fix?? and also nandroid??
I use titanium backup and also backup with CWM..something I should be doing differently?
narddawg314 said:
what is ROM Manager permissions fix?? and also nandroid??
I use titanium backup and also backup with CWM..something I should be doing differently?
Click to expand...
Click to collapse
When you three-finger-boot into ClockworkMod recovery there's a backup/restore and it's called nandroid backup. It works very well backing up everything on your phone system/data/settings, everything.
The custom ROM I have came with the ROM Manager apk (which is run on the phone). It has an option to fix permissions which corrects the file permissions of all of your apps and data for root access in case permissions get corrupted. Sometimes when you install a new mod/zip the file permissions either get corrupted or are not given (I'm no dev, so I don't know the specifics). If you get a lot of ForceCloses this will fix them in most cases.
I don't know exactly what happened, but I'm 99% sure it was from installing this shutdown animation and after restoring (again through CWM3) it works fine now.
Hope that helped.
I booted into CWM right after posting that and found the fix permissions option you were talking about. I had already been performing the nandroid backups, but didn't know they were called that. Thanks for the quick response!
I'm still not able to get the boot animation to work though. The power down worked, and it's pretty cool....anybody got any ideas?
Good looking out bro, This animation always stayed in my Moment as a back up cause I liked it so much.
maybe this...?
could it be because my kernel is 2.6.32.9?
narddawg314 said:
could it be because my kernel is 2.6.32.9?
Click to expand...
Click to collapse
That's the same kernel I'm on. Should work just fine, perhaps there is some conflict with the new ViperROM? Haven't tested it on that ROM since I first released this. I know they have lots of modifications, even to the kernel I believe.
narddawg314 said:
I booted into CWM right after posting that and found the fix permissions option you were talking about. I had already been performing the nandroid backups, but didn't know they were called that. Thanks for the quick response!
I'm still not able to get the boot animation to work though. The power down worked, and it's pretty cool....anybody got any ideas?
Click to expand...
Click to collapse
You need to have a kernel that supports boot animation chnges. Mammon was the one who did this for 2.1, I believe he was the one who did it for 2.2 as. Well.
Sent from Carl Sagan through the Cosmos
leatherneck6017 said:
That's the same kernel I'm on. Should work just fine, perhaps there is some conflict with the new ViperROM? Haven't tested it on that ROM since I first released this. I know they have lots of modifications, even to the kernel I believe.
Click to expand...
Click to collapse
I'm running VIPERrom 3.0.2
thomasskull666 said:
You need to have a kernel that supports boot animation chnges. Mammon was the one who did this for 2.1, I believe he was the one who did it for 2.2 as. Well.
Sent from Carl Sagan through the Cosmos
Click to expand...
Click to collapse
Kernel's are confusing to me..how do I flash a compatible one onto my phone?
BlackPearl890 said:
love this!! .. would it be possible to get a shutdown animation too? cause there's one here http://forum.xda-developers.com/showpost.php?p=10926995&postcount=4 but it's not compatible with cwm3, nor does it have your customizations which I love.
Thanks
Click to expand...
Click to collapse
hey quick question. i am running the same rom as you (SyndicateROM Frozen 1.0.2)and when i flashed this i hae random things fc on me as soon as i get into the phone. like mms and email. any ideas ?

After booting aospCMod 2.3.2

So for the past two days I've been trying to flash the new AOSP Gingerbread ROM, but although I follow everything straight from the wiki it always seems to get stuck on the HTC screen after the last reboot. Help me please!
EDIT: So I somehow got the rom to boot last night using RA recovery but after loading up a notice says Setup Wizard not being able to respond...etc, etc. Also after booting my home, call, and search buttons don't work at all. not even for other roms. PLEASE HELP!
020211 So after following instructions from this post: http://forum.xda-developers.com/showpost.php?p=11078749&postcount=4860 i was finally able to boot CM7 fully and without problems. If you're having problems with booting aosp's gingerbread rom just use this guy's instructions (at the bottom) and you should be good to go.
Make sure u install manually through clockworkmod mod first format boot system data and cache then install the rom let it boot then reboot and install gapps without wiping and reboot then you should be good I'm using the normal clockworkmod 2.5.2 and it works great
Sent from my HTC Hero CDMA using XDA App
okay thanks! ill try that and get back to you.
so no luck at booting. i'm still stuck at the HTC Boot screen.
i tried also and still no luck .. i hate this
to anybody having problems flashing GB, try these steps EXACTLY:
1) use clockwork 2.5.0.1 and follow the wipe/format process in the wiki
2) flash the rom then gapps
3) FLASH A CAPPED 691 KERNEL
This seems to be a continued issue, and I think it is because some phones can't handle high clock speeds like 768. The recovery currently posted by aosp (cwm 3.0.0.5) is overclocked and therefore will not boot, same with the kernel in the rom. Report back here if it works, I have already updated the wiki to advise people of this. Good Luck.
So i tried it again with the capped kernel and it still didn't work. also tried it without firerat's MOD but still a no go.
I'm upgrading aosp 2.3.2 rom from nightly build #188. Before flashing aosp rom plesae try to wipe everything like data, dalvik-cache, battery and rotate status. BTW, I'm using RA-Recovery not ClockworkMod.
i installed it after the standard wipes and thats it and its working just fine at 768 on my hero200. didnt have any issues and im loving the rom, but i am having one issue. this link is to my issue in q and a. if you can help feel free to hop on my thread and reply. other than that, i juast wanted to say this rom is great!
sai5o4 said:
So i tried it again with the capped kernel and it still didn't work. also tried it without firerat's MOD but still a no go.
Click to expand...
Click to collapse
Did you also flash a capped recovery?
sent from my hero, which no longer sucks ass
il Duce said:
Did you also flash a capped recovery?
sent from my hero, which no longer sucks ass
Click to expand...
Click to collapse
I agree with that. He should try a recovery that's not overclocked.
Root-Hack-Mod-Always™
Yeah I'm using clockwork 2.5.0.1.
sai5o4 said:
Yeah I'm using clockwork 2.5.0.1.
Click to expand...
Click to collapse
Well, I hate to say it but you must be missing a step somewhere. FYI in the OP for gingerbread the cwm3.0.0.5 is now capped at 691, so try that one again. Wipe both wipe options, go to mounts and format boot,system,data,cache, then gn into advanced wipe dalvik twice. Flash the rom,gapps,deca #43 capped 691 kernel, reboot. The first boot should take a while so be patient. Report back here if you can't get it, and I would recommend going into the live help room (aospbot IRC) which in the OP for GB. Good luck.
So still no luck. But I'm determined to somehow fix this no matter how many times I try!
Sent from my HERO200 using XDA App
sai5o4 said:
So still no luck. But I'm determined to somehow fix this no matter how many times I try!
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
I think you should back up your sd card and then format it in your pc. Then start all over. From the recovery on down. Skip any mods till you get booted up. Like keyboards and boot screens etc. And try the capped cwm recovery. Hope it helps good luck
Something.About.Me.You.Dont
Like.Its.Cool.I.Understand.AWAH
Still no luck on booting aospCMod. Like they say no two heroes are the same. But that doesn't mean I'm still not going to try again and again and again (xinfinity).
got it to boot but...
so i somehow got it to boot using ra-recovery but right as i loads it says the setup wizard has unexpetedly stopped processing. any help?
sai5o4 said:
020211 So after following instructions from this post: http://forum.xda-developers.com/showpost.php?p=11078749&postcount=4860 i was finally able to boot CM7 fully and without problems. If you're having problems with booting aosp's gingerbread rom just use this guy's instructions (at the bottom) and you should be good to go.
Click to expand...
Click to collapse
Glad I could help man! Glad to see you got it worked out!
There's a readme in the Aosp 2.3.2 OP. It's right under the files, labeled README. I think it would help if anyone having trouble actually reads through this. skipping steps causes problems.
also, Factory reset skips over the /system partition. I recommend wiping /system partition if you're coming from another rom, or if you are decided to start fresh. You have to go into the partitions menu to actually format the /system partition.
mtran2988 said:
You have to go into the partitions menu to actually format the /system partition.
Click to expand...
Click to collapse
This is true if you use CWM (which I do not ) but if you fastboot wipe all the partitions you will have no issues w/ RA as the OP discovered once he used the instructions that I posted.
touble with vvm
uh not quite sure if this is rite place to post this but looked better than the rest, so i got the rom running fine and it is wonderful improvement to my what use to be my wifes stock hero. Only problem is with the visual voice mail, i copied it from the stock hero before flashing, than after flashing copied it back, it works in the sense that i can see the voicemail in the app and even the voicemail to text works, but 2 things are wrong, 1 is i cant clear voicemail notification in the status bar without rebooting phone, and now she gets a text from a 9069 that tells her phone has recieved a voicemail, found a work around for the second one i blocked the number using blacklist so the text dont come thru nomore, but how i can i fix the fact that the only way to clear the voicemail notification is to reboot the phone? Any help, comments or suggestions would be greatly appreciated. Or is there somewhere i can dl the latest sprint vvm app?? or are they device specific. Thank you in advance for any help

Black SCREEN!! please help

hi guys
in my case i have got a droid xt862 i did one click sbf and then i updated 5.7.906 ((Blur_Version.5.6.890.XT862.Verizon.en.US)) and installed safestrap 2.10 after rooting
1) now inside safestrap i first go to the menu and enable it
2) then i wipe data, cache partition and dalvik
3) i installed KEXEC-cm-9-20121006-UNOFFICIAL-solana rom
4) i restarted
5) i get black screen
i tried and tried searched and searched wipe before and after etc combinations with different roms safestrap version please help i dunno where i am going wrong
also after sbf the chinese solana xt883 rom not flashing through rsd lite
vthl said:
hi guys
in my case i have got a droid xt862 i did one click sbf and then i updated 5.7.906 ((Blur_Version.5.6.890.XT862.Verizon.en.US)) and installed safestrap 2.10 after rooting
1) now inside safestrap i first go to the menu and enable it
2) then i wipe data, cache partition and dalvik
3) i installed KEXEC-cm-9-20121006-UNOFFICIAL-solana rom
4) i restarted
5) i get black screen
i tried and tried searched and searched wipe before and after etc combinations with different roms safestrap version please help i dunno where i am going wrong
also after sbf the chinese solana xt883 rom not flashing through rsd lite
Click to expand...
Click to collapse
As I recall, the latest KEXEC roms do not work on Safestrap 2.10, it requires Safestrap 3.x which hasn't been released yet. For now, I'd say grab an older version, or settle with a current GB rom for now and watch development.
Skreelink said:
As I recall, the latest KEXEC roms do not work on Safestrap 2.10, it requires Safestrap 3.x which hasn't been released yet. For now, I'd say grab an older version, or settle with a current GB rom for now and watch development.
Click to expand...
Click to collapse
and what about the wiping procedure i mean before and after?
can you pls link me a rom that will work with 2.10
vthl said:
and what about the wiping procedure i mean before and after?
can you pls link me a rom that will work with 2.10
Click to expand...
Click to collapse
Wiping before or after does not make any difference (though I always do it after flashing the ROM.) Wipe data/factory reset also wipes the cache partition, and, of course, Dalvik cache, so those two wipes are redundant. Any ROM that doesn't start after a wipe data/factory reset has a problem with the ROM, not with how many times that you wipe data.
I would frankly wait on CM9 or CM10 builds until Hashcode gets the new Safestrap working on the D3. There are plenty of ROMs that will work - Maverick, Steel Droid (the GB version is more feature-complete), Liberty, Bionic. You can find them here, but it might be easier at droidforums.net: http://www.droidforums.net/forum/droid-3-roms/
doogald said:
Wiping before or after does not make any difference (though I always do it after flashing the ROM.) Wipe data/factory reset also wipes the cache partition, and, of course, Dalvik cache, so those two wipes are redundant. Any ROM that doesn't start after a wipe data/factory reset has a problem with the ROM, not with how many times that you wipe data.
I would frankly wait on CM9 or CM10 builds until Hashcode gets the new Safestrap working on the D3. There are plenty of ROMs that will work - Maverick, Steel Droid (the GB version is more feature-complete), Liberty, Bionic. You can find them here, but it might be easier at droidforums.net: http://www.droidforums.net/forum/droid-3-roms/
Click to expand...
Click to collapse
thanks i tried maverick rom 4.5 ((D3-MavROM-4.5)) its 157mb file but no hope it has the same problem with 2.10 do you have idea why?
vthl said:
thanks i tried maverick rom 4.5 ((D3-MavROM-4.5)) its 157mb file but no hope it has the same problem with 2.10 do you have idea why?
Click to expand...
Click to collapse
I would try MavRom 4.0 (4.5 has a battery drain problem with the overclock script), this is what I use + GSM unlock, in safestrap do a factory reset/data wipe before and after flash (I only do it once, but it's always recommended to wipe up to three times).
Skreelink said:
I would try MavRom 4.0 (4.5 has a battery drain problem with the overclock script), this is what I use + GSM unlock, in safestrap do a factory reset/data wipe before and after flash (I only do it once, but it's always recommended to wipe up to three times).
Click to expand...
Click to collapse
Well I have same issue every single time I get black screen. Does these ROM support both network CDMA and GSM same as like XT883 ?
NIGHTMARE- said:
Well I have same issue every single time I get black screen. Does these ROM support both network CDMA and GSM same as like XT883 ?
Click to expand...
Click to collapse
I use the XT883 radio with MavROM 4.0 AND Kexec CM10, works grand except in JB, the signal indicator is broken, I use a Network Monitor widget for a good signal meter.
If you install Safestrap, enable safe-boot and reboot, it will boot a black screen, since it has no rom to boot into. After enabling safe-boot, flash a rom, Gapps, wipe data/factory reset, then reboot. Although you can also just grab SafeStrap 3.05 now, which is a lot easier to swap between roms for testing.
Skreelink said:
I use the XT883 radio with MavROM 4.0 AND Kexec CM10, works grand except in JB, the signal indicator is broken, I use a Network Monitor widget for a good signal meter.
If you install Safestrap, enable safe-boot and reboot, it will boot a black screen, since it has no rom to boot into. After enabling safe-boot, flash a rom, Gapps, wipe data/factory reset, then reboot. Although you can also just grab SafeStrap 3.05 now, which is a lot easier to swap between roms for testing.
Click to expand...
Click to collapse
Actually dhacker29 has been working on the signal strength bars and at on the 10/18 build it works for me on the 883 radio.
MrObvious said:
Actually dhacker29 has been working on the signal strength bars and at on the 10/18 build it works for me on the 883 radio.
Click to expand...
Click to collapse
10/18 is the one I'm using with the XT883 radio, signal bars are stuck at 1, under status, signal strength is bogus.
Did you use my build.prop I posted a while back? I know it works for a fact because I have 4 bars now.
Sent from my XT862 using xda app-developers app
MrObvious said:
Did you use my build.prop I posted a while back? I know it works for a fact because I have 4 bars now.
Sent from my XT862 using xda app-developers app
Click to expand...
Click to collapse
Should be, yes... you could repost here so I could verify, would be nice.
EDIT: Mwuahaha, I edited the current build.prop (the one that came with 10-18) to work with XT883 and got the signal bars working.
Try that. Also make sure you uncheck both boxes under Mobile Networks for Verizon stuff.
MrObvious said:
Try that. Also make sure you uncheck both boxes under Mobile Networks for Verizon stuff.
Click to expand...
Click to collapse
Thanks, but I already fixed it. Decided to do some meddling with the current build.prop from the zip and whatnot on my own.
Skreelink said:
Thanks, but I already fixed it. Decided to do some meddling with the current build.prop from the zip and whatnot on my own.
Click to expand...
Click to collapse
Good to hear!
Skreelink said:
I use the XT883 radio with MavROM 4.0 AND Kexec CM10, works grand except in JB, the signal indicator is broken, I use a Network Monitor widget for a good signal meter.
If you install Safestrap, enable safe-boot and reboot, it will boot a black screen, since it has no rom to boot into. After enabling safe-boot, flash a rom, Gapps, wipe data/factory reset, then reboot. Although you can also just grab SafeStrap 3.05 now, which is a lot easier to swap between roms for testing.
Click to expand...
Click to collapse
bro last i checked with 2.10 and i did just as you said (without enabling it would be no sense to install rom & i know that)..... but i still got the Black screen @ the time ......thou i have to test the same with the new 3.05 but i hardly think that would make a difference
Please help
Ok, I need HELP. Please be kind as I am not nearly as inteligent as the rest of you and this is my first post, but I can follow directions well (so my wife says).
I purchased a Droid 3 with black screen. Phone powers on and I can hear it going through the boot process. Lights on the bottom 4 buttons light up, computer recognizes phone when plugged in. I think someone has tried unsuccesfully to flash phone or mod it in some way causing the black screen. I have downloaded the files to restore phone to stock state. NOW my dilema..... I can't see the screen to get the phone into ap fastboot so I can do the restore. I have rooted several phones and even unbricked many phones (all with the help of those much smarter than me and their directions). So if someone could give me the very detailed steps to get phone into ap fastboot without the ability to see the screen I think I can fix it (I hope!)
Thanks in advance.
swinter said:
Ok, I need HELP. Please be kind as I am not nearly as inteligent as the rest of you and this is my first post, but I can follow directions well (so my wife says).
I purchased a Droid 3 with black screen. Phone powers on and I can hear it going through the boot process. Lights on the bottom 4 buttons light up, computer recognizes phone when plugged in. I think someone has tried unsuccesfully to flash phone or mod it in some way causing the black screen. I have downloaded the files to restore phone to stock state. NOW my dilema..... I can't see the screen to get the phone into ap fastboot so I can do the restore. I have rooted several phones and even unbricked many phones (all with the help of those much smarter than me and their directions). So if someone could give me the very detailed steps to get phone into ap fastboot without the ability to see the screen I think I can fix it (I hope!)
Thanks in advance.
Click to expand...
Click to collapse
Could be the flex cable..

ForceROM & OUDHS are Fantastic!

I'm a newbie here, my 1st post so unable to post in the ForceROM thread. I have very little experience. On my last phone Photon 4G I only rooted so I could use the Wifi Tether app. The ForceROM is absolutely perfect for my needs, even in its 1st version. The included mods 4in1 restart menu and the Hotspot Mod are extremely useful! I have been rocking this ROM for the last 2 days without any issues! I love that it keeps the functionality of TW (I actually like TW and its notifications and menu bar with quick access to settings used everyday) and the S4 while removing all the unwanted Bloatware. I was easily able to follow the instructions given in the OUDHS thread to flash recovery via Odin then root via OUDHS recovery followed by flashing the ForceRom zip via recovery. There were only a few apps I wanted to install for which Unknownforce provided download links for all apps removed from Stock, which I was able to install via the system/apps directory. Great work here! You guys are great. Thanks!
ForceRom Flashing
Kingmdm said:
I'm a newbie here, my 1st post so unable to post in the ForceROM thread. I have very little experience. On my last phone Photon 4G I only rooted so I could use the Wifi Tether app. The ForceROM is absolutely perfect for my needs, even in its 1st version. The included mods 4in1 restart menu and the Hotspot Mod are extremely useful! I have been rocking this ROM for the last 2 days without any issues! I love that it keeps the functionality of TW (I actually like TW and its notifications and menu bar with quick access to settings used everyday) and the S4 while removing all the unwanted Bloatware. I was easily able to follow the instructions given in the OUDHS thread to flash recovery via Odin then root via OUDHS recovery followed by flashing the ForceRom zip via recovery. There were only a few apps I wanted to install for which Unknownforce provided download links for all apps removed from Stock, which I was able to install via the system/apps directory. Great work here! You guys are great. Thanks!
Click to expand...
Click to collapse
Noob question here as well... mind if i ask you before you flash the ForceRom, did you wipe data cache etc? but in what order.
Trying to figure this out before i continue
Thanks
juniorr7710 said:
Noob question here as well... mind if i ask you before you flash the ForceRom, did you wipe data cache etc? but in what order.
Trying to figure this out before i continue
Thanks
Click to expand...
Click to collapse
Yeah when you flash new roms, you will most likely ALWAYS wipe Data, Cache, Delvik Cache [In this order] then flash ROM, Gapps, ect
Once I have flashed the rom I wipe data and cache again just because im used to doing that but I doubt you have to, reboot and you should be good
blacknet101 said:
Yeah when you flash new roms, you will most likely ALWAYS wipe Data, Cache, Delvik Cache [In this order] then flash ROM, Gapps, ect
Once I have flashed the rom I wipe data and cache again just because im used to doing that but I doubt you have to, reboot and you should be good
Click to expand...
Click to collapse
do i also have to do a system restore/wipe?
juniorr7710 said:
do i also have to do a system restore/wipe?
Click to expand...
Click to collapse
umm yeah i always do it just in case
i backup everything on my phone to my computer just to be on the safe side
theres a wipe script up now, it will do everything for you and the oudhs recovery is my fav even over cwm! <3 i think cuz my fav color is grey lol and ya the forcerom is grate!
I've been using the ForceROM 1.0 for a while now and really like it too. When I first rooted the stock rom, I tried to get rid of a lot of bloat and some of it I couldn't. So I was glad to see it already done using ForceROM.
The only problem I have is the voicemail. It always says it's trying to verify my account but it never can. Anyone else having this issue?
hm no i am not having that issue at all, if you use sprint update the prl then the profile
mysticjp said:
hm no i am not having that issue at all, if you use sprint update the prl then the profile
Click to expand...
Click to collapse
Well this didn't seem to work. When I open the voicemail app, it sits there about 1 minute then finally gives me this error:
Communication with the Voicemail-to-Text server has timed out. We will continue to verify your Voicemail-to-Text account status in the background.
Voicemail service will not be interrupted while we verify the account status.
Also, when I check for updates in voicemail app, it errors out saying "General failure. Please try again at a later time."
Maybe I will try clearing cache and dalvik cache.
call sprint =) im not sure if u have to be subscribed to it or not
id wipe and reflash your setup ive never had a prob with the voicemail program its either something to do with your rom setup or its sprint

CPL1 Firmware/ Rom Stock Plus

CPL1 Stock Plus Rom​
I would just like to share an enhanced version of stock note 4 with the only "foreign" app being the grace InCallUI mainly because I have yet to locate a guide on how to make all the buttons layout correctly and there is also very minor cosmetic changes (removed words from lock screen and extended the drop-down panel to go all the way across the screen). All features and modifications were done by me using guides from @Kamy, @ikrom, @jovy23, @asc1977, @EMSpilot, @tdunham, @daxgirl, @tkari4, @Hani K., @Misterxtc and the InCallUI ported by @Albe95. Last but certainly not least, all this was made possible with @ASSAYYED's great rom kitchen and @Ticklefish's Tickle my Android.
FEATURES
Stock kernel
Rooted
Busybox
Zip-Aligned
Deodexed
Toolbox Enabled
Flashlight in notification panel
5-way Reboot
Native Tethering
Loud Volume Warning Disabled
Brought back "once and always" buttons
Call Recording Enabled
6 in the Hotseat Launcher
TW Swipe Left Shortcut
Viper4Android - credits to @viper520
Vol up to turn on flashlight
Signatures Disabled
Write to Ext. Sd with Tibu
4 way Multi window
All apps Multi Window
CPL1 Safe Firmware Upgrade
Partial Firmware courtesy of @Misterxtc
Link to Full Firmware
ROM LINK
HERE
Flash this as well for viper- Viper SUpolicy
1.
Thank you Kevin!
Does Odin "CPL1 Safe Firmware Upgrade" include the modem?
1Xfan said:
Thank you Kevin!
Does Odin "CPL1 Safe Firmware Upgrade" include the modem?
Click to expand...
Click to collapse
Yes, the firmware includes everything except recovery and aboot. Also a few things I forgot to mention, the switch to turn on volume up for flashlight is in the display settings and to set the apps for toolbox you just long press on the toolbox icon (when activated) and then drag it up to the edit section at the top of the screen. Sorry guys I'm terrible at writing the info and summary for these roms but hopefully I can get it figured out one day.
kevintm78 said:
Yes, the firmware includes everything except recovery and aboot. Also a few things I forgot to mention, the switch to turn on volume up for flashlight is in the display settings and to set the apps for toolbox you just long press on the toolbox icon (when activated) and then drag it up to the edit section at the top of the screen. Sorry guys I'm terrible at writing the info and summary for these roms but hopefully I can get it figured out one day.
Click to expand...
Click to collapse
I understand. Please clarify for me...
I'm on pj2 unlocked/rooted. I want to stay unlocked/rooted. Do I flash the "partial".zip, or Odin the "full" ? :fingers-crossed:
When I read through hsbdr's post's, I must have 5 or six tabs open
I prefer instructions simple, and retail and Dev posts/instructions separate from each other. As well as return to "unrooted" or "keep root" posts. Many have accidentally locked their BL as a result. There is no reason to include a "return to stock-locked" link in with a custom rooted ROM post/links. Uhg
Thank you for keeping it simple for us, and all your work!
1Xfan said:
I understand. Thanks for clarifying :fingers-crossed:
When I read through hsbdr's post's, I must have 5 or six tabs open
I prefer instructions simple, and retail and Dev instructions separate!
Click to expand...
Click to collapse
Yeah it does get a little confusing. That's the main reason I just posted my own link just to make sure I'm not linking to the wrong thing. Fun fact while testing all this out, I was able to flash pj2 roms while I was on the cpl1 firmware and everything worked. I just tested one rom but it seems like once you upgrade your firmware you may not have to downgrade again if you want to go back to another rom.
kevintm78 said:
Yeah it does get a little confusing. That's the main reason I just posted my own link just to make sure I'm not linking to the wrong thing. Fun fact while testing all this out, I was able to flash pj2 roms while I was on the cpl1 firmware and everything worked. I just tested one rom but it seems like once you upgrade your firmware you may not have to downgrade again if you want to go back to another rom.
Click to expand...
Click to collapse
oooh really! So probably there is nothing new in the upgrade only that it's un-downgradable:silly:
1Xfan said:
oooh really! So probably there is nothing new in the upgrade only that it's un-downgradable:silly:
Click to expand...
Click to collapse
The first couple times I tested a firmware that I made, I was terrified of locking my bl. I flashed the one I posted and then tested for downgrade and all is good, but it doesn't seem to be necessary to downgrade again. As far as differences between them the only thing I noticed was more security stuff and some different bloatware.
Forgive me...
So the "full firmware link" (download file name: "cpl1_tar_32bit_ext4") doesn't include the recovery and aboot files(?)
1Xfan said:
Forgive me...
So the "full firmware"> link doesn't include the recovery and aboot files(?)
Click to expand...
Click to collapse
That's correct. If you flash it and let it boot you'll have your custom recovery, unlocked bootloader, no root, no busybox, cpl1 modem/kernel, and odexed system. That way if someone wants pure stock they can just flash the supersu file and your set.
She's running great for me! I installed xposed and oscar kernel and it's stable as a rock! Any chance of the additional grace apps - email, contacts, etc? Great work man!
CrazyCram said:
She's running great for me! I installed xposed and oscar kernel and it's stable as a rock! Any chance of the additional grace apps - email, contacts, etc? Great work man!
Click to expand...
Click to collapse
I just tried the email zip at this post and it worked. When I get off work I'll test those others. They all should work but if you don't want to be the guinnie pig I can do it.
So oscar works? I thought it might need an update but that's good to know.
Yes, Oscar 13 works great. I'll give the grace apps a try - thanks again!
kevintm78 said:
I just tried the email zip at this post and it worked. When I get off work I'll test those others. They all should work but if you don't want to be the guinnie pig I can do it.
So oscar works? I thought it might need an update but that's good to know.
Click to expand...
Click to collapse
For some reason after flashing grace email, I see high battery usage for email 19-30%. Tried clearing data but still see the drain. Am I missing something?
sam298 said:
For some reason after flashing grace email, I see high battery usage for email 19-30%. Tried clearing data but still see the drain. Am I missing something?
Click to expand...
Click to collapse
Honestly, I only use that app when testing it and I haven't noticed any battery drain, but I can't say I've ever checked either. I wonder if it just needs to settle in. Maybe someone that uses it more can chime in to see if it's an issue for everyone. If you want to, see if after a while it goes back to normal range and if it doesn't try to get a log and we can see what we can come up with.
Hello @kevintm78. Need a little help. I just odin'd the full firmware and now my phone won't boot. I get unfortunately System UI has stopped. I was on CPJ1 before I did this. Should I just try to restore a backup? Thanks
dhplap said:
Hello @kevintm78. Need a little help. I just odin'd the full firmware and now my phone won't boot. I get unfortunately System UI has stopped. I was on CPJ1 before I did this. Should I just try to restore a backup? Thanks
Click to expand...
Click to collapse
If Odin completed it should have at least updated your firmware. If that's the case you could just go ahead and flash the rom. All the files from the full firmware get overwritten anyway. Just make sure you do a complete wipe (everything but your sd/Ext sd) and you should be good to go.
kevintm78 said:
If Odin completed it should have at least updated your firmware. If that's the case you could just go ahead and flash the rom. All the files from the full firmware get overwritten anyway. Just make sure you do a complete wipe (everything but your sd/Ext sd) and you should be good to go.
Click to expand...
Click to collapse
Thank you. Yes I just restored a backup just fine and it's also showing my baseband is now CPL1. Now I'm going to flash your rom so I can have stock whenever I want it. Thank you for your time and help. And for the upgrade.
@kevintm78...thank you for this. I had lost 4g somewhere in all my flashing. I tried reflashing partial firmware and even restoring backups wouldnt give me 4g again.I was getting ready to go through the entire lock, unlock, root process again when I found this thread. I downloaded the full firmware in the op, flashed with flashfire, rebooted into recovery, wiped dalvik, data, cache, and rebooted system. I now have 4g back. I made a nandroid of stock, and then clean flashed LOS and still have 4g. So thankful to you!!
gcounts said:
@kevintm78...thank you for this. I had lost 4g somewhere in all my flashing. I tried reflashing partial firmware and even restoring backups wouldnt give me 4g again.I was getting ready to go through the entire lock, unlock, root process again when I found this thread. I downloaded the full firmware in the op, flashed with flashfire, rebooted into recovery, wiped dalvik, data, cache, and rebooted system. I now have 4g back. I made a nandroid of stock, and then clean flashed LOS and still have 4g. So thankful to you!!
Click to expand...
Click to collapse
Yeah man, I'm a bit of a flashaholic too and was having the same issues a while back when experimenting with data fixes and thought that I fried my sim card. Like you I tried the partial first but the only thing that got my 4g back was flashing a full stock firmware. :good:

Categories

Resources