Hey guys.. it's me again..
With a little question..
i've searched for a solution and i found nothin unfortunately ..
Maybe it's me .. i don't know ..
Anywhore..
couple of months ago i unlocked the bootloader.. and i flashed A kernel ..
and did that over and over again.. last week .. i flashed Alfs.. i had some problems and bricks but i went through em easily thanks for Paul1989
But now.. i'm trying to flash nAa 08b ..
and unfortunately the flasher won't detect the phone ..
i know how to flash as i said before ..
i tried to do it on another laptop ... but nah ..
same problem ..
won't detect the phone ..
so i'm stuck at: connect the usb while holding the back button..
That's it ..
Hope u guys have some ideas ..
Thanks..
Cheers :
EDIT: i had a Problem with mounting the Phone to the pc.. but i solved it by installing the "Void" fix .. cause i have *alfs*
after that .. i could mount the phone..
so i thought now i can flash it ..
but .. NAH .. again .. it did NOT detect the phone :/
Plug your phone onto pc with battery out,hold the back button,then when youre holding it put the battery back in. Hope i helped
Sent from my GT-I5800 using xda premium
DeHuMaNiZeD said:
Plug your phone onto pc with battery out,hold the back button,then when youre holding it put the battery back in. Hope i helped
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
i Did that couple of minutes ago ..
it Did not work out ..
What a failure
Hmm...i dont know...****...
Sent from my GT-I5800 using xda premium
nAa Kernel?
Well... let us try to diagnose the horse the other way around ...
When you connect the X8 in Flash Mode does Windows show the device as "SEMC Flash Device" in the Device Manager OR is it some "SEMC HSUSB Device" without a driver (yellow exclamation mark) OR isn't it recognized at all?
- If it's correctly recognized as SEMC Flash Device then Flashtool should be able to recognize the phone (assuming you're doing everything right).
- If it's mis-identified as "SEMC HSUSB Device" look around in the Forums - there's a modded Android driver that resolves this problem (this happens with one of the custom kernels ... I fail to remember if it happens with nAa or Alfs).
EDIT: Seems the misdetection only happens by chance with Alfs, but in case you experience that problem see this post.
- If it's not recognized at all ... check you're keeping the back button pressed while connecting the X8 to the PC until it's being recognized - check your USB cable - try another USB port - check your System for possible virii infections.
B.Jay said:
nAa Kernel?
Well... let us try to diagnose the horse the other way around ...
When you connect the X8 in Flash Mode does Windows show the device as "SEMC Flash Device" in the Device Manager OR is it some "SEMC HSUSB Device" without a driver (yellow exclamation mark) OR isn't it recognized at all?
- If it's correctly recognized as SEMC Flash Device then Flashtool should be able to recognize the phone (assuming you're doing everything right).
- If it's mis-identified as "SEMC HSUSB Device" look around in the Forums - there's a modded Android driver that resolves this problem (this happens with one of the custom kernels ... I fail to remember if it happens with nAa or Alfs).
EDIT: Seems the misdetection only happens by chance with Alfs, but in case you experience that problem see this post.
- If it's not recognized at all ... check you're keeping the back button pressed while connecting the X8 to the PC until it's being recognized - check your USB cable - try another USB port - check your System for possible virii infections.
Click to expand...
Click to collapse
B.jay
unfortunately .. it isn't recognized at all..
and believe me i'm 100% sure Im doing everything right ..
now i have downloaded the file u've given me ..
let's see the results
Thanks
EDIT: What am i supposed to do with that file??
i thought it's a driver i can install.. but apparently.. it isn't..
Thanks in advance..
EDIT2: I already have alfs .. and i want to install nAa ..
And i have a detection problem .. i never had before using alfs ..
i guess you know that already.. said that just to clarify ..
DeHuMaNiZeD said:
Hmm...i dont know...****...
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
Lol.. it's alright
Sira. said:
Lol.. it's alright
Click to expand...
Click to collapse
Get the newes flashtool and reinstall flash drivers(They come bundled with flashtool)
It will work...worked for me.
yes ar .. flashtool
bogdan_mihai554 said:
Get the newes flashtool and reinstall flash drivers(They come bundled with flashtool)
It will work...worked for me.
Click to expand...
Click to collapse
And where can i find that flashtool?? there are plenty of flashtools in this Forum...
Am not gonna risk it, you know..
Link it up if u could
Thanks
EDIT: i have found the flashtools here http://forum.xda-developers.com/showthread.php?t=920746 ..
But how in the hell am i supposed to know which one is a proper flashtool for my x8??
EDIT2: Hold on a sec.. is that a flashtool???? It ends with FTF.. Not with EXE..
Damn am confused ..
linyaunam said:
yes ar .. flashtool
Click to expand...
Click to collapse
Wait.. What?
what do u see in the device manger ?
keep the device manager open when connecting the phone
and see if there is a blink (refreshing) in there - for detecting a new device
what do u see on the phone .. does it enter boot mode
if all is right on the phone side .. but still no response on the pc side (no new device yellow mark or blink) check your usb cable
amu_cpln said:
what do u see in the device manger ?
keep the device manager open when connecting the phone
and see if there is a blink (refreshing) in there - for detecting a new device
what do u see on the phone .. does it enter boot mode
if all is right on the phone side .. but still no response on the pc side (no new device yellow mark or blink) check your usb cable
Click to expand...
Click to collapse
What device manager?????
excuse me man .. but i never heard of that.. or maybe i did .. in another way???
Also, as i said.. i've tried another laptop.. The same thing happened..
Did NOT detect the phone..
and i have to tell you that the device LED lights up Green.. that's boot mode i guess
But i don't know what's the god damn problem..
Sira. said:
What device manager?????
excuse me man .. but i never heard of that.. or maybe i did .. in another way???
Click to expand...
Click to collapse
The device manager is a list of hardware devices connected to the PC (in Windows)
If you are using windows .. type devmgmt.msc in the run prompt and the device manager shall open
Sira. said:
What device manager?????
Also, as i said.. i've tried another laptop.. The same thing happened..
Did NOT detect the phone..
Click to expand...
Click to collapse
that what makes me doubt your USB cable .. do u have another cable .. or another phone to test if this cable is working well
Sira. said:
What device manager?????
and i have to tell you that the device LED lights up Green.. that's boot mode i guess
But i don't know what's the god damn problem..
Click to expand...
Click to collapse
It will show up on the phone screen when it enters bootloader
amu_cpln said:
The device manager is a list of hardware devices connected to the PC (in Windows)
If you are using windows .. type devmgmt.msc in the run prompt and the device manager shall open
that what makes me doubt your USB cable .. do u have another cable .. or another phone to test if this cable is working well
It will show up on the phone screen when it enters bootloader
Click to expand...
Click to collapse
Ooooohh that device manager ..
Alright .. okay
And yah i do have another USB cable .. i will test it right away ..
..
uhh okay .. sorry i missed up...
Wait for updates .. i will now test another USB cable
amu_cpln said:
The device manager is a list of hardware devices connected to the PC (in Windows)
If you are using windows .. type devmgmt.msc in the run prompt and the device manager shall open
that what makes me doubt your USB cable .. do u have another cable .. or another phone to test if this cable is working well
It will show up on the phone screen when it enters bootloader
Click to expand...
Click to collapse
Alright.. i have some updates ..
i brought another USB cable..
opened the device manager..
And connected the device in flash mode..
so i found in the SEMS USB FLASH .. has an explanation mark on it..
Alright okay .. i uninstalled it.. connected the phone again..
so it installs the drivers again..
then after like one second.. it tells me that the device was not installed...
I don't know why..
Then again..
With the SEMC USB FLASH with the explanation mark...
Duh..
flash with x10flashtool .. enter bootloader andtflash it
_____________________________________
Samsung Galaxy Ace
CM7 7.2 Deodexed
zimage kernel + v6 supercharger + turboboost
oktavianno said:
flash with x10flashtool .. enter bootloader andtflash it
_____________________________________
Samsung Galaxy Ace
CM7 7.2 Deodexed
zimage kernel + v6 supercharger + turboboost
Click to expand...
Click to collapse
Dude.. the flasher won't detect the phone..
Sira. said:
Alright.. i have some updates ..
i brought another USB cable..
opened the device manager..
And connected the device in flash mode..
so i found in the SEMS USB FLASH .. has an explanation mark on it..
Alright okay .. i uninstalled it.. connected the phone again..
so it installs the drivers again..
then after like one second.. it tells me that the device was not installed...
I don't know why..
Then again..
With the SEMC USB FLASH with the explanation mark...
Duh..
Click to expand...
Click to collapse
yes the exclamation mark says that you donot have proper drivers
search and install the latest drivers for your phone .. shouldnt have taht exclamation mark
the drivers should also come with your flash tool .. in the drivers folder ..
you can right click in device manager select update driver .. and point to teh drivers in your flashtool ..
if you dont have a copy .. search for new drivers elsewhere and install
Dude,how did you flashed the alfs kernel?
Sent from my E15i using Tapatalk
Related
As the title says guys, i cant put my x8 to flashmode ... when Im pressing the back button , and im pluging in my phone to computer , the Green flashmode diod its not appearing ... a also cant connect my x8 to computer even though i installed latest PCC. Yes i did full wipe and also install another ROM but it doesnot help Really guys please help me with my problem because im running out of ideas what to do ..
Did You install drivers from Flashtool folder?
And - does Your x8 recognize the charger? Cause maybe USB port is damaged.
i did install Gordon's Gate..
Well when i plug in the cable my x8 is charging ..
i also tried to connect my brother x8 to the computer but the same thing happens , i cant enter flashmode and i cant see my sdcard ..
oh yea i forgot to add that the same cable its working on my other computer but not working on this one ;(
You have to keep the back button pressed and then plug the usb cable, and release the button when green light appears...
Maybe this helps!
sidkota said:
You have to keep the back button pressed and then plug the usb cable, and release the button when green light appears...
Maybe this helps!
Click to expand...
Click to collapse
yes thats exactlly what im doing , yesterday it was working perfectly but now it does not . But the key is that the green light its not appearing.I don't know what is the cause of that.
Sounds like something terrible!
Can't the x8 be flashed while in recovery mode? Once this happened to my tab, it wasn't going to flash mode, luckily it flashed in recovery(cwm) mode also!
sidkota said:
Sounds like something terrible!
Can't the x8 be flashed while in recovery mode? Once this happened to my tab, it wasn't going to flash mode, luckily it flashed in recovery(cwm) mode also!
Click to expand...
Click to collapse
OK thanks i will try this one thanks you know now i just want to flash to stock so i can see if the connection with computer will work or not
EDIT: its not working unfortunately
Did You try to reset Your PC? On my PC sometimes USB ports doesn't work, but after rebooting computer everything is working
Bolussimo said:
Did You try to reset Your PC? On my PC sometimes USB ports doesn't work, but after rebooting computer everything is working
Click to expand...
Click to collapse
i did 3 times
proadi96 said:
OK thanks i will try this one thanks you know now i just want to flash to stock so i can see if the connection with computer will work or not
EDIT: its not working unfortunately
Click to expand...
Click to collapse
try bootloader mode also!
---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------
and as u mentioned earliep that it is working on your other pc, try deleting the drivers and the device too, from the device manager, use the show hidden devices option, find ur x8, and delete the drivers! Then try again!
sidkota said:
try bootloader mode also!
---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------
and as u mentioned earliep that it is working on your other pc, try deleting the drivers and the device too, from the device manager, use the show hidden devices option, find ur x8, and delete the drivers! Then try again!
Click to expand...
Click to collapse
OK i tried to look for the drivers but as far as i can see they are not there.Hey does PCC still installs the drivers automatically? because some time ago i remember it was , it was actually saying ''installing drivers'' or something like this , but now i downloaded the newest version and there is only install bar , not any other as it was in previous versions ... maybe thats the cause that i dont have proper drivers?
I have this problem too week ago. I tried to connect and disconnect the usb. Didnt work. When i checked again, usb port on my computer didnt mount my usb cable correctly.
thanks for the thanks......
Sent by my sexy orange W8 using XDA app...................
Thats actually what i do step-by-step :
1.Plug in cable to my computer
2.Then Plug in cable to my phone
3.In this moment there should pop up notification that says that the phone is connected with computer , and it asks if you want to share sd card or something like this
4.But unfortunately id does not pop up and my computer does not recognize the phone
5.Help...
proadi96 said:
Thats actually what i do step-by-step :
1.Plug in cable to my computer
2.Then Plug in cable to my phone
3.In this moment there should pop up notification that says that the phone is connected with computer , and it asks if you want to share sd card or something like this
4.But unfortunately id does not pop up and my computer does not recognize the phone
5.Help...
Click to expand...
Click to collapse
Hi proadi, try to remove all drivers of USB remembered devices using USB-View, and then, plug it again and see what happens.
The program is attached on the msg.
PS: Remove all the remembered drivers instead of only the SEMC or such thing
Cheers,
b1s
Pull out all usb connect to pc, uninstall all usb port driver , from system manager, restart pc. plug in you phone.
Sent from my thumb using my eyes
biscoitu said:
Hi proadi, try to remove all drivers of USB remembered devices using USB-View, and then, plug it again and see what happens.
The program is attached on the msg.
PS: Remove all the remembered drivers instead of only the SEMC or such thing
Cheers,
b1s
Click to expand...
Click to collapse
everything is falling apart because it stopped working even on my laptop ;/ I removed all the drivers by the program you provided , Now i will restart my PC and see if its working or not
and PS. I dont have original cable for my x8 ! But it was working and now its not ..
When i connected my mi410 to my lattop, the notification keep showing 'usb device not recognize'.
But, if i connected other set of mi410, the problem doesn't occured.
is it something happened to my phone?
is there any one could help?
P/S: i've already installed the correct usb driver on my lattop and it could recognize mi300 & other mi410.
tell me which are the roms you are using on each of your device ( on other mi410 too ) ???
also which OS on your laptop ????
don't forget to Hit Thanks bro
install SUT LR flashing tool.It have USB drivers of our phone packaged with the software.It will help you .
dude please uninstall drivers ... restart lappy and install again .... check if this work ...
also if possible provide more details like are you on stock ROM or any custom ...which OS is with your lappy and anything more if you want to share
ezio2 said:
tell me which are the roms you are using on each of your device ( on other mi410 too ) ???
also which OS on your laptop ????
don't forget to Hit Thanks bro
Click to expand...
Click to collapse
my mi410 is on Edowar CM7 latest update (27/3). the other 2 set i tried is on Sharp Rom & also Edowar CM7
My lattop is running Windows 7 Ultimate.
vivekb said:
dude please uninstall drivers ... restart lappy and install again .... check if this work ...
also if possible provide more details like are you on stock ROM or any custom ...which OS is with your lappy and anything more if you want to share
Click to expand...
Click to collapse
my mi410 is on Edowar CM7 latest update (27/3).
My lattop is running Windows 7 Ultimate.
i've already tried to unistall the drivers & reinstall for couple times. still same, and ONLY my device was not recognize.
Eric1665 said:
my mi410 is on Edowar CM7 latest update (27/3).
My lattop is running Windows 7 Ultimate.
i've already tried to unistall the drivers & reinstall for couple times. still same, and ONLY my device was not recognize.
Click to expand...
Click to collapse
seems to be a hardware problem with your cell maybe :cyclops:
ezio2 said:
seems to be a hardware problem with your cell maybe :cyclops:
Click to expand...
Click to collapse
what the.......argh..
is there anyway to solve it or flash back to stock rom?
Eric1665 said:
what the.......argh..
is there anyway to solve it or flash back to stock rom?
Click to expand...
Click to collapse
You can always use SUT LR 1.8.2 to flashback stock rom...
JUst put cell in Download mode using Vol UP + Power
open SUT from programs list
connect using usb cable ( while in Download Mode )
if it recognizes the phone Use Erase all User Data option
Hit Next button and wait for process to finish
it will take around 2 minutes..
Then you ll be on Stock os..
Hope i have helped you .. Don't forget to HIt Thanks
ezio2 said:
You can always use SUT LR 1.8.2 to flashback stock rom...
JUst put cell in Download mode using Vol UP + Power
open SUT from programs list
connect using usb cable ( while in Download Mode )
if it recognizes the phone Use Erase all User Data option
Hit Next button and wait for process to finish
it will take around 2 minutes..
Then you ll be on Stock os..
Hope i have helped you .. Don't forget to HIt Thanks
Click to expand...
Click to collapse
i've tried it for times. it doesnt work
the device is still not recognize.
i think i have to send it to the service centre..
Eric1665 said:
i've tried it for times. it doesnt work
the device is still not recognize.
i think i have to send it to the service centre..
Click to expand...
Click to collapse
Problem with your Windows / SUT installation...go to device manager and delete all device relevant USB controllers and other devices showing anything as "Qualcomm".
Uninstall SUT.
Restart windows, connect device and let it install the drivers first. Install SUT, install should go through without any issues and without prompting any error messages, in other words it should be complete uninterrupted install. Connect device and check if you see "a phone is connected"
Try with SUT 1.7 version also. Let us know if you still have any problems
Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
what exactly did you do? write all the steps
Ok I think it works now, I needed to switch to MSC mode Thanks anyway
well, the phone needs to be turned off
+ drivers installed,lpl
Sent from my E15i using xda premium
+ holding back button while connecting USB
Is it important how did i send this?
Tommolo said:
Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
Click to expand...
Click to collapse
intall latest drivers and hold back button then connect to the computer....................
if still don't recognize, go to device manager and check there,
I think you don't:laugh: turn on debugging
yeah!
you forget to turn on your debugging!
mark :
allow non market apps
android debugging
install all drivers
x8driver
flashtool\driver
gordons gates
Help.
here is my problem i got the flashtool because i want to downgrade my xperia pro and it connects it detects my device but once i put it into the fastboot to flash it back to its original state it just shows the little pop up that says to connect it to fastboot mode and i do it on the phone the little blue light turns on and stuff but it doesn't recognize it on the flashtool the usb debugging is on and the unknown sources is on as well i want to downgrade the phone because since i upgraded it doesn't let me watch movies on my phone from the internet and i want to root it to if anyone can help it will be much appreciated. thanks :crying:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Awesome!
nag xperia said:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Click to expand...
Click to collapse
Doing this now. Makes Sense! Thank you
phnxme7 said:
Doing this now. Makes Sense! Thank you
Click to expand...
Click to collapse
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
ariadelvana said:
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
Click to expand...
Click to collapse
make sure if your flash tool not corrupt, disable firewall or antivirus..
install all driver and check your phone
Milandas01 said:
Hello friend, please pay your attention. I'm try to root my canvas hd using sp flash tool. Everything is alright but when I connect my device it's only shows searching. Not detect i also install or uninstall x86 driver hundred times. But problem is same. what is the problem i can't understand :'(
Please please please help
Thank in advance :'(
Click to expand...
Click to collapse
Wrong forum
pooped from my rooted a$$
in s1 tool i pressed identify and then i plugged my usb cable but it is not detecting my phone
ashthegamer said:
in s1 tool i pressed identify and then i plugged my usb cable but it is not detecting my phone
Click to expand...
Click to collapse
did you enter in flashmode by holding back button while connecting
ashthegamer said:
in s1 tool i pressed identify and then i plugged my usb cable but it is not detecting my phone
Click to expand...
Click to collapse
Connect it in flash mode
sent from my W8 using client-server technology
drivers installed?
antivirus disabled
Nothinng mentioned
sent from my W8 using client-server technology
pcc installed?
signature under repair
stamatis said:
drivers installed?
Click to expand...
Click to collapse
yes i have installed drivers and disabled antivirus too ,i was holding back button it is showing green light
ashthegamer said:
yes i have installed drivers and disabled antivirus too ,i was holding back button it is showing green light
Click to expand...
Click to collapse
gordons gate installed???
fotak-x said:
gordons gate installed???
Click to expand...
Click to collapse
i have installed but i m not sure it was the right one. wen i m using flashtool it is showing an error
"ERROR - Drivers need to be installed for connected device.
ERROR - You can find them in the drivers folder of Flashtool."
i have installed that drivers serveral times but it is not showing.....
ashthegamer said:
i have installed but i m not sure it was the right one.. can u pls give me the link of it...
Click to expand...
Click to collapse
It may be in your flashtools folder
Go to flashtools installation folder/drivers now u should see it... & its the right one
- maybe you should plug while your device is turned on?+usb debugging enabled (don't laugh! I just can't remember it)
sent using" ultimate - ics - standard"
Do you have PC Companion? It should have necessary drivers for the phone and also install gordon's gate from the setup file in the drivers folder.If its not working then search the web for it you will get the latest drivers for download.
jay-z-s said:
It may be in your flashtools folder
Go to flashtools installation folder/drivers now u should see it... & its the right one
- maybe you should plug while your device is turned on?+usb debugging enabled (don't laugh! I just can't remember it)
sent using" ultimate - ics - standard"
Click to expand...
Click to collapse
i am getting this error
ashthegamer said:
i am getting this error
Click to expand...
Click to collapse
Sorry, I didn't unlocked with cmd & never used it.
I had problem with recognizing my device too ,Gordons gate solved my issue
I simply used flash tools & unlocked by clicking some buttons (& s1tools for making sure its unlockable)
sent using" ultimate - ics - standard"
Try different method then. Use flash tool
Sent from my X8 using xda app-developers app
My z3compact became a brick. I can't turn on it . When I connect to computer , I can't use flashtool to flash a rom because "usb debug off"appear . When I use pc companion to repair , it can't detect my phone though I enter the volume- for a long time . When my phone connect to flashtool , the red led can turn on for several seconds ,then it turn off ,green led never turn on! When I plug in , nothing happen . I don't know how to deal with my phone .Can someone help me?
liam gao said:
My z3compact became a brick. I can't turn on it . When I connect to computer , I can't use flashtool to flash a rom because "usb debug off"appear . When I use pc companion to repair , it can't detect my phone though I enter the volume- for a long time . When my phone connect to flashtool , the red led can turn on for several seconds ,then it turn off ,green led never turn on! When I plug in , nothing happen . I don't know how to deal with my phone .Can someone help me?
Click to expand...
Click to collapse
Did u shut the device down? With volume up and power button pressing at the same time till its vibrate?
Sent from my Xperia Z2 using XDA-Developers mobile app
Yes , I shut down my phone as you mentioned, the device vibrated for 3 times , then I connect it to my pc , pc companion can't detect it ,flashtool only appear device connected but usb debug off .
liam gao said:
Yes , I shut down my phone as you mentioned, the device vibrated for 3 times , then I connect it to my pc , pc companion can't detect it ,flashtool only appear device connected but usb debug off .
Click to expand...
Click to collapse
Did u get it into fastboot mode?
Sent from my Xperia Z2 using XDA-Developers mobile app
der-cyanoge said:
Did u get it into fastboot mode?
Click to expand...
Click to collapse
no? I can't , screen is totally dark ,never light , I can't enter fastboot and recovery.mode:crying:
liam gao said:
no? I can't , screen is totally dark ,never light , I can't enter fastboot and recovery.mode:crying:
Click to expand...
Click to collapse
So u dont need a light for fastboot so just make the phone of by pressing power and volume up button than wait 5sec then u just hold the vol. Up button and connect ur phone with the PC
Sent from my Xperia Z2 using XDA-Developers mobile app
der-cyanoge said:
So u dont need a light for fastboot so just make the phone of by pressing power and volume up button than wait 5sec then u just hold the vol. Up button and connect ur phone with the PC
Click to expand...
Click to collapse
I tried for several times , failed.... Now I plug in the battery . I hope the screen can light on
der-cyanoge said:
So u dont need a light for fastboot so just make the phone of by pressing power and volume up button than wait 5sec then u just hold the vol. Up button and connect ur phone with the PC
Click to expand...
Click to collapse
Though I hold vol.+ and power ,device vibrated ,but nothing happen.
Dont press power button for fastboot mode just do power of if its vibrate 3 times than your phone is off OK? Next step is connect ur USB cable to PC than press only the vol up button !!!!!! not the power button!!!!!! and then connect ur phone with the USB cable so then just make fastboot flash bootimage Form a Rom of your choice vor stock firmware
Sent from my Xperia Z2 using XDA-Developers mobile app
der-cyanoge said:
Dont press power button for fastboot mode just do power of if its vibrate 3 times than your phone is off OK? Next step is connect ur USB cable to PC than press only the vol up button !!!!!! not the power button!!!!!! and then connect ur phone with the USB cable so then just make fastboot flash bootimage Form a Rom of your choice vor stock firmware
Sent from my Xperia Z2 using XDA-Developers mobile app
Click to expand...
Click to collapse
After I press vol+ and connect to pc , the led become red then turn off ,flashtool still appear device connected but usb debug off. I heard that only the led turn into green from red then the flashtool can flash a rom , but now ,only red led .
Oh damn did u try alsovolume down ?
Sent from my Xperia Z2 using XDA-Developers mobile app
der-cyanoge said:
Oh damn did u try alsovolume down ?
Click to expand...
Click to collapse
sure,still nothing happen.
liam gao said:
sure,still nothing happen.
Click to expand...
Click to collapse
So how did u brickd ur device ? Maybe i can find a solution
Sent from my Xperia Z2 using XDA-Developers mobile app
der-cyanoge said:
So how did u brickd ur device ? Maybe i can find a solution
Click to expand...
Click to collapse
At first ,I flashed a wrong rom , the device can't stop rebooting , then I want to save the device,I use flashtool to flash an offical rom(I flashed the d8853 rom ,my device is SO-02g)after I flashed,totally brick......
liam gao said:
At first ,I flashed a wrong rom , the device can't stop rebooting , then I want to save the device,I use flashtool to flash an offical rom(I flashed the d8853 rom ,my device is SO-02g)after I flashed,totally brick......
Click to expand...
Click to collapse
Oh man thats hard but i dont think it is posiblle to destroy ur bootloader in Android so im searching for a solution
Sent from my Xperia Z2 using XDA-Developers mobile app
liam gao said:
At first ,I flashed a wrong rom , the device can't stop rebooting , then I want to save the device,I use flashtool to flash an offical rom(I flashed the d8853 rom ,my device is SO-02g)after I flashed,totally brick......
Click to expand...
Click to collapse
Have you tried the hard reset button?
Under the flap next to where the sim goes, is a tiny hole. You need a pin to press and reset.
Edit: Do you have ADB installed? Have you installed the Sony drivers. on your PC?
You also need to run the exe in the Drivers folder within Flashtool, to make sure you have correct flashomde drivers available. Installing these drivers is very difficult in Windows 10 and it require restarting the machine in safe mode, and going into the advanced settings to disable driver signature checking, this how to video is for windows 8, but you'll get the idea
All of those need to be in place before flashtool will work.
Does it go into flashmode? Make sure it's turned off, start flashtool on your pc, then hold the volume down while plugging in the usb cable. If flashtool recognises it then you can follow bilboa1's great guide. You will probably have to start from scratch, old firmware, root exploit, recovery etc etc.
Didgesteve said:
Have you tried the hard reset button?
Under the flap next to where the sim goes, is a tiny hole. You need a pin to press and reset.
Edit: Do you have ADB installed? Have you installed the Sony drivers. on your PC?
You also need to run the exe in the Drivers folder within Flashtool, to make sure you have correct flashomde drivers available. Installing these drivers is very difficult in Windows 10 and it require restarting the machine in safe mode, and going into the advanced settings to disable driver signature checking, this how to video is for windows 8, but you'll get the idea
All of those need to be in place before flashtool will work.
Does it go into flashmode? Make sure it's turned off, start flashtool on your pc, then hold the volume down while plugging in the usb cable. If flashtool recognises it then you can follow bilboa1's great guide. You will probably have to start from scratch, old firmware, root exploit, recovery etc etc.
Click to expand...
Click to collapse
I installed all the drivers correctly , hard reset yellow does nothing. Now I use window7 to save my phone , I have found sth. useful. The device cpu send sth. about QHSUSB_BULK driver . Which means the the most basic software had lost. Now I am searching for the device bootloader .
der-cyanoge said:
Oh man thats hard but i dont think it is posiblle to destroy ur bootloader in Android so im searching for a resolution
Click to expand...
Click to collapse
I think bootloader must be wrong.Today ,when I connected to pc . The information QHSUSB_BULK driver need to install appeared,which means the basicest software in my phone had lost.
liam gao said:
I think bootloader must be wrong.Today ,when I connected to pc . The information QHSUSB_BULK driver need to install appeared,which means the basicest software in my phone had lost.
Click to expand...
Click to collapse
Thread here lists installing QHSUSB driver, worth a go perhaps?
There is a thread dedicated to rescuing hardbrick devices
liam gao said:
My z3compact became a brick. I can't turn on it . When I connect to computer , I can't use flashtool to flash a rom because "usb debug off"appear . When I use pc companion to repair , it can't detect my phone though I enter the volume- for a long time . When my phone connect to flashtool , the red led can turn on for several seconds ,then it turn off ,green led never turn on! When I plug in , nothing happen . I don't know how to deal with my phone .Can someone help me?
Click to expand...
Click to collapse
Exactly the same happened to me this morning. I had not time so I left it and came back at midday. After trying to reset it many times it finally turned on (maybe 15 min trying), but the USB port completely died... Then I notices son humidity in the two cameras crystals. The phone was working great, I even play asphalt 8 for 20 min and nothing wrong happened. I've just sent it to repair. Tech guy told my that maybe the motherboard is compromised.
The only thing I can surely tell you is keep trying, it worked for me.