I am looking at a phone for a friend of mine. It's a original Droid. It will not boot to the OS, it just sits at the M logo for hours and hours. I have got it into recovery mode by powering on and holding up on the D pad. I then used RSD Lite to reflash VZW_A855_FRG01B_QSC6085BP_C_01.43.01P_SW_UPDATE_01 to it. It says it finished and passed, but still sits at the M logo. Any ideas?
::tap tap tap:: Is this thing on?
Guess not. Thanks for all the help. Sure am glad I own an iPhone.
can you try with another custom rom?
So i hope someone responds to this.
My og Droid is stuck at the M logo. i can get into bootloader and Clockworkmod revoery mode, but i cant actually boot into the OS.
So when i first got it a few days ago, i did a factory reset. I then rooted it, which worked, and then installed rom manager. i made a back up twice to be sure, then tried to flash to Kfazz's Jellybean ROM. It said success, but after that i was in a boot loop. I read on how to fix this, but adb wont find the device until it is in the OS, so i popped out the battery and restored from my backup, but now it just stays at the M logo. Any help would be greatly appreciated.
Thanks in advance
The M logo is the bootloader's logo. Since the droid has unlocked bootloader it is possible that something messed it up.
Can you restore the stock bootloader?
Erovia said:
The M logo is the bootloader's logo. Since the droid has unlocked bootloader it is possible that something messed it up.
Can you restore the stock bootloader?
Click to expand...
Click to collapse
Is it? I hit up on the d-pad and that says bootloader on it. You may be right as i am new to ths and will try that out after i eat. Thank you for the quick reply!
---------- Post added at 06:30 PM ---------- Previous post was at 06:22 PM ----------
BradlyeG said:
Is it? I hit up on the d-pad and that says bootloader on it. You may be right as i am new to ths and will try that out after i eat. Thank you for the quick reply!
Click to expand...
Click to collapse
So i tried it and im not actually sure how to reset the bootloader. Thanks again and any help is always apprecieated.
Go into recovery and wipe data, cache, and dalvik cache. Then try and boot it up. If that fails download a new rom wipe everything above again, then flash the new rom, the m logo is not the bootloader nothin u did had anything with the bootloader. I have this problem once in a when flashin a kernel or new rom
Sent from my Droid using xda premium
WillisD said:
Go into recovery and wipe data, cache, and dalvik cache. Then try and boot it up. If that fails download a new rom wipe everything above again, then flash the new rom, the m logo is not the bootloader nothin u did had anything with the bootloader. I have this problem once in a when flashin a kernel or new rom
Sent from my Droid using xda premium
Click to expand...
Click to collapse
Thank you so much for the info. Wiping all the above did not work, so i am going to flash to a new rom. Thanks again!!
---------- Post added at 09:20 PM ---------- Previous post was at 09:15 PM ----------
BradlyeG said:
Thank you so much for the info. Wiping all the above did not work, so i am going to flash to a new rom. Thanks again!!
Click to expand...
Click to collapse
Holy hedgehogs it freakin worked!!!!!!!!!!!!!!!!!!! At least i think. It got past the m logo and is doong some weird boot animation
just wipe everything before before flashing new rom cm7 is pretty stable, and there is steel droid thats still active
---------- Post added at 09:23 PM ---------- Previous post was at 09:20 PM ----------
if you made it to the boot animation then you should be good, just let me know
WillisD said:
just wipe everything before before flashing new rom cm7 is pretty stable, and there is steel droid thats still active
---------- Post added at 09:23 PM ---------- Previous post was at 09:20 PM ----------
if you made it to the boot animation then you should be good, just let me know
Click to expand...
Click to collapse
I actuLly used CM9, but i cant get the touch screen or touch buttons to work. I may just have to use a different build, or roll back to an ealier cm build.
Related
Okay, so last day I was trying to get the CM9 on my galaxy note. Got the CWM and the CM9 Flashable Zip. Installed the cm9 through CWM, but after boot, phone gets hanged when I do anything. I don't want to lose my phone! Tell me the solution please!
Sagar Deshpande said:
Okay, so last day I was trying to get the CM9 on my galaxy note. Got the CWM and the CM9 Flashable Zip. Installed the cm9 through CWM, but after boot, phone gets hanged when I do anything. I don't want to lose my phone! Tell me the solution please!
Click to expand...
Click to collapse
Did you wiped cache/dalvik/data after flashing it in recovery ?
Of course, I did. the phone boots alright, but hangs up right away in few seconds, after notification area says "Preparing SDCARD".
Sagar Deshpande said:
Okay, so last day I was trying to get the CM9 on my galaxy note. Got the CWM and the CM9 Flashable Zip. Installed the cm9 through CWM, but after boot, phone gets hanged when I do anything. I don't want to lose my phone! Tell me the solution please!
Click to expand...
Click to collapse
what rom were you on?
on what does it hang? boot, activation, etc...
---------- Post added at 08:51 PM ---------- Previous post was at 08:50 PM ----------
Sagar Deshpande said:
Of course, I did. the phone boots alright, but hangs up right away in few seconds, after notification area says "Preparing SDCARD".
Click to expand...
Click to collapse
flash it again, something went wrong probably...
mahboob2t said:
what rom were you on?
on what does it hang? boot, activation, etc...
---------- Post added at 08:51 PM ---------- Previous post was at 08:50 PM ----------
flash it again, something went wrong probably...
Click to expand...
Click to collapse
boot is okay, I reach the home screen ( lock screen sometimes ) but Doing anything just hangs it itself. I'm now trying to roll back to stock via odin. Reflashed the cm9 multiple times with absolutely no use. Complimentarily, I wiped data / cache / dalvik /batt. stats everytime.
I hope u have flashed gapps also during the installation.and if it is not working and it is a pain now so go back to pre-rooted gb rom from the signature of sahil sir.then re-flash cm9.
Sent from my GT-N7000 using xda app-developers app
:cyclops:Thank you all guys! Seems like I found solution! My phone was hardbricked due to emmc bug... it costed samsung too much to gimme a new mobo!
Sagar Deshpande said:
:cyclops:Thank you all guys! Seems like I found solution! My phone was hardbricked due to emmc bug... it costed samsung too much to gimme a new mobo!
Click to expand...
Click to collapse
Did Samsung take the phone, and replace the mobo no questions asked? Or did they charge you for the mobo?
Did you try to flash from stock ICS?
No. They Didnot charge me.
I may have waded in over my head and need help back. Curious to checkout the jellybean AOKP build. I flashed my Tab 8.9 LTE (SGH-i957) via odin. Now I'm stranded with it. Stupidly I didn't have Clockwork Mod recovery BEFORE doing this so I have no backup of my Honeycomb.
My i957 appears to be in a boot loop replaying the Android animation. I can boot from into Jelly Bean via CWM 5.5.0.4 recovery which I installed AFTER my initial JB flash.
I've tried reflashing the [ROM][3.2]Contingency ROM 3.2 numerous times as per http://forum.xda-developers.com/showthread.php?t=1658243
Odin goes through the motions as expected, but it never boots past the Android animation. When shut off the green battery animation appears when plugged in as normal. I can boot into recovery and download modes of course.
I'm stuck on how to proceed. Is ClockworkMod Recovery complicating this? Can I switch to a stock recovery mode?
I've been picking through the forums. Trying this and that, but no success.
I'm using Windows XP. Kies will recognize a device but won't connect. Odin seems to be fine. I've used it before to root it and my previous Tab.
mfortner said:
I may have waded in over my head and need help back. Curious to checkout the jellybean AOKP build. I flashed my Tab 8.9 LTE (SGH-i957) via odin. Now I'm stranded with it. Stupidly I didn't have Clockwork Mod recovery BEFORE doing this so I have no backup of my Honeycomb.
My i957 appears to be in a boot loop replaying the Android animation. I can boot from into Jelly Bean via CWM 5.5.0.4 recovery which I installed AFTER my initial JB flash.
I've tried reflashing the [ROM][3.2]Contingency ROM 3.2 numerous times as per http://forum.xda-developers.com/showthread.php?t=1658243
Odin goes through the motions as expected, but it never boots past the Android animation. When shut off the green battery animation appears when plugged in as normal. I can boot into recovery and download modes of course.
I'm stuck on how to proceed. Is ClockworkMod Recovery complicating this? Can I switch to a stock recovery mode?
I've been picking through the forums. Trying this and that, but no success.
I'm using Windows XP. Kies will recognize a device but won't connect. Odin seems to be fine. I've used it before to root it and my previous Tab.
Click to expand...
Click to collapse
Flash your stock rom from sammobile.com
Sent from my SGH-I727 using xda premium
orlandoxpolice said:
Flash your stock rom from sammobile.com
Sent from my SGH-I727 using xda premium
Click to expand...
Click to collapse
After flashing that ROM, AT&T's Rethink Possible logo animation is looping at boot. What am I missing?
mfortner said:
After flashing that ROM, AT&T's Rethink Possible logo animation is looping at boot. What am I missing?
Click to expand...
Click to collapse
Sometimes first boot takes a long time. You are putting the stock rom in the pda slot right?
Other option is to let the battery drain
Sent from my SGH-I727 using xda premium
orlandoxpolice said:
Sometimes first boot takes a long time. You are putting the stock rom in the pda slot right?
Other option is to let the battery drain
Click to expand...
Click to collapse
Thanks for the advice. Yes in the PDA slot without a doubt. I drained the battery - even pressing the power button until it stopped vibrating.
After a brief partial charge. I rebooted. Still no luck.
mfortner said:
Thanks for the advice. Yes in the PDA slot without a doubt. I drained the battery - even pressing the power button until it stopped vibrating.
After a brief partial charge. I rebooted. Still no luck.
Click to expand...
Click to collapse
Odin to stock should be a pristine image of the tablet I don't get why that wouldn't work. Can you flash twrp?
Sent from my SGH-I727 using xda premium
---------- Post added at 08:39 AM ---------- Previous post was at 08:37 AM ----------
Also when you boot into recovery after odin flash of stock which recovery do you see?
Sent from my SGH-I727 using xda premium
orlandoxpolice said:
Odin to stock should be a pristine image of the tablet I don't get why that wouldn't work. Can you flash twrp?
---------- Post added at 08:39 AM ---------- Previous post was at 08:37 AM ----------
[/COLOR]Also when you boot into recovery after odin flash of stock which recovery do you see?
Click to expand...
Click to collapse
I flashed TWRP. Still the loop in normal boot. In recovery boot TWRP was successful flashed over CWM recovery. I tried flashing the stock ROM again. No change. I guess I asked for it. I'd be the first to say I'm in over my head, but I've never had issues before- all the way to my fun times with Maemo and my Nokia N800 & N810.
Is there another step for me? I suppose I could try on another PC, but Odin appears to working normally. I was able to successfully flash TWRP so I'm thinking that not going to help.
mfortner said:
I flashed TWRP. Still the loop in normal boot. In recovery boot TWRP was successful flashed over CWM recovery. I tried flashing the stock ROM again. No change. I guess I asked for it. I'd be the first to say I'm in over my head, but I've never had issues before- all the way to my fun times with Maemo and my Nokia N800 & N810.
Is there another step for me? I suppose I could try on another PC, but Odin appears to working normally. I was able to successfully flash TWRP so I'm thinking that not going to help.
Click to expand...
Click to collapse
after you flash your stock rom in odin which recovery do you see? you should see stock 3e recovery.
orlandoxpolice said:
after you flash your stock rom in odin which recovery do you see? you should see stock 3e recovery.
Click to expand...
Click to collapse
Yes I see that now in recovery mode. Rebooting from here still gives the AT&T loop.
What should I do else should I do from here to proceed? Reset? Wipe partition?
mfortner said:
Yes I see that now in recovery mode. Rebooting from here still gives the AT&T loop.
What should I do else should I do from here to proceed? Reset? Wipe partition?
Click to expand...
Click to collapse
If you see the 3e recovery that means odin worked. You have the i957 or the R, M, or D version?
Sent from my SGH-I727 using xda premium
---------- Post added at 12:21 PM ---------- Previous post was at 12:20 PM ----------
Do not mess with partitions
Sent from my SGH-I727 using xda premium
Duplicate. See below.
orlandoxpolice said:
If you see the 3e recovery that means odin worked. You have the i957 or the R, M, or D version?
---------- Post added at 12:21 PM ---------- Previous post was at 12:20 PM ----------
Do not mess with partitions
Click to expand...
Click to collapse
It has SGH-i957 on the rear, on the download mode screen and that how its always recognized by Google and by Kies (when it works). Its a U.S. AT&T LTE device. I've tried flashing again the ROM from Sammobile, but it still loops. Sigh.
It's BACK! A testament to never giving up and help from orlandoxpolice! In 3e I reset it and it rebooted.Honeycomb never looked so good.
Glad you fixed it. I was confused because odin to stock usually fixes everything.
Cheers
Sent from my SGH-I727 using xda premium
Hey fellas, i'm desperate cos i've bricked my friend's droid 3 (XT860) while trying to flash cyanogen mod 10.1 to it.
I do not remember which version it was but i'm almost sure it was a 5.2.420 - Android 2.3.5.
I rooted the phone and flashed clockworkmod recovery using Rom Manager, wiped both data and cache, installed cyanogenmod 10.1 and gapps, and wiped data and cache again. After rebooting, the phone was stucked on the 'Dual Core' logo. I can go into recovery but i no longer have clockworkmod installed nor can i try to reinstall the ROM again.
After trying some stock flashing and getting a boot failure error message, im now with this AP Fastboot Flash Mode (S) (Boot Failure) Screen.
Could anyone please help me? It's my friend phone!
I'm sorry about my english.
Thank you for your time!
You can restore/unbrick it to the stock ROM, which will allow you to start over from a clean slate. I suggest using Safestrap instead of CWM/Rom Manager.
psouza4[dot]com/droid3/unbrick[dot]htm
EDIT: Refer to post #4 below.
StrelokPDA said:
You can restore/unbrick it to the stock ROM, which will allow you to start over from a clean slate. I suggest using Safestrap instead of CWM/Rom Manager.
psouza4[dot]com/droid3/unbrick[dot]htm
Click to expand...
Click to collapse
I wouldn't use that on a XT860
Sent from my XT862 using Tapatalk
sd_shadow said:
I wouldn't use that on a XT860
Sent from my XT862 using Tapatalk
Click to expand...
Click to collapse
Unhelpful response is unhelpful. Though you have some good info in your signature:
Looks like you want to flash to the first ROM here: http://sbf.droid-developers.org/phone.php?device=21
Flashing instruction here: https://docs.google.com/document/d/...10GSijVrg/edit?pli=1#bookmark=id.rvj235ud4nkd
StrelokPDA said:
Do you have a better idea? Is the XT862 ROM going to brick his already bricked phone? Or give him a chance to boot it, and start with a somewhat working system (even if the radio etc. might not work correctly)... I don't claim to be a smart phone guru, but your response isn't very helpful.
Click to expand...
Click to collapse
download Motorola Milestone 3 (XT860) firmware (.XML)
from http://sbf.droid-developers.org/phone.php?device=21
flash with rsd lite following Flash xml recovery files (Stock Rom) with RSD Lite
---------- Post added at 09:24 PM ---------- Previous post was at 09:17 PM ----------
or download Motorola Milestone 3 (XT860) firmware (.XML)
from http://sbf.droid-developers.org/phone.php?device=21
flash with moto-fastboot.exe
---------- Post added at 09:31 PM ---------- Previous post was at 09:24 PM ----------
more in my List
sd_shadow's [Collection] of Links For: Milestone 3 (XT860, XT861, XT860, ME863)
I tried flashing stock rom in my lenovo A7000a with lollipop version via SP Flash tool but it stuck in bootloop. Then i installed twrp recovery and root it and flash a custom rom "Androim 7" by thinking that it will solve my problem but it didn't. It still get stuck in bootloop. When it get first boot up in custom rom, for first time bootanimation get change a littel and then it get stuck again and every time i flash stock rom or custom rom it get stuck at bootanimation.
Did u enable da/dl with all checksum in spft?if not u must reflash it again with stock rom after enabling them in spft thats it ????????.???? :highfive:
Hit thanks if i helped
Yes, I have checked da dl all checksum in option->download
Then possible it maybe the problem with the stock rom/scatter that u used.try downloading another stock rom with its scatter.it may help
aswinp222 said:
Then possible it maybe the problem with the stock rom/scatter that u used.try downloading another stock rom with its scatter.it may help
Click to expand...
Click to collapse
I did try it by download another stock rom from *Flashing Stock Rom Via SP Flash Tool[Lenovo A7000] by*PrashantRana
But it gets into bootloop.
If bootanimation appears,dont worry just wait for long time.try rebooting with battery replacement etc:both stock and androium takes a hell lot of time to boot for first time.or else you may try flashing CM roms or the nexus MM minimal ported by myself.the wont take much time to boot up :cheers
aswinp222 said:
If bootanimation appears,dont worry just wait for long time.try rebooting with battery replacement etc:both stock and androium takes a hell lot of time to boot for first time.or else you may try flashing CM roms or the nexus MM minimal ported by myself.the wont take much time to boot up :cheers
Click to expand...
Click to collapse
I did as you said above and i downloaded cm13 and istalled it but it didnt work. I have uploaded a video see it. For first time i installed cm13 it goes to cm13 boot animation but in another boot it didnt go to cm13 boot animation. I have provided a video. Have a look.
In fact your phone is a7000a or is it a7000 plus?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
Which are the fields that you wiped before flashing the rom?
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
In spft which option did u chose?download only/firmware upgrade/format all???
aswinp222 said:
In fact your phone is a7000a or is it a7000 plus?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
Which are the fields that you wiped before flashing the rom?
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
In spft which option did u chose?download only/firmware upgrade/format all???
Click to expand...
Click to collapse
Both are same. A7000a is the model number and Lenovo A7000 Plus is official name of the Device.
I have tried two methods.
1st Method.
First I flash stock rom then I wipe data/cache/dalvik-cache.
2nd Method
I did same as above in this method but I wipe data/system/cache/dalvik-cache.
I have tried two method
1. Dowload only
2. Firware Upgrade
Third method format all didnt didnt work.
It shows some error.
A7000 and a7000plus are not the same.they got different architecture and kernel.a7000 got a 1.5ghz cpu whereas a7000plus got 1.5ghz,resembling to k3note.make sure you flash the proper firmware.choose firmware upgrade in spft.also i recomment flashing recovery only after first boot.if bootanimation appears it is likely to boot.
aswinp222 said:
A7000 and a7000plus are not the same.they got different architecture and kernel.a7000 got a 1.5ghz cpu whereas a7000plus got 1.5ghz,resembling to k3note.make sure you flash the proper firmware.choose firmware upgrade in spft.also i recomment flashing recovery only after first boot.if bootanimation appears it is likely to boot.
Click to expand...
Click to collapse
Heyy, i got boot up but It again gets reboot and and then its goes to loop. I think the problem is in Cpu Governer. So is there a way to fix cpu frequency?
just ttry flashing daredevil kernel.it got some patches for the same i hope.but i dont think that it helps.give out a try though.
aswinp222 said:
just ttry flashing daredevil kernel.it got some patches for the same i hope.but i dont think that it helps.give out a try though.
Click to expand...
Click to collapse
But the kernel is for marshmallow and my phone has lollipop
Does it wok with Cm13
After I rooted my phone I decided to install a ROM in it. I Found MIUI 7 for the phone and with some instructions it told me to wipe the phone data, use custom recovery and install the .zip and it should be fine. but it went into a boot loop and never booted up. Then I went to download My-ROM v3.3 and still did not work. then I realised it needed the original EMUI to work.
So now I'm stuck here. its been 3 days and my phone still isn't working. my recovery is TWRP.
ImJustChew said:
After I rooted my phone I decided to install a ROM in it. I Found MIUI 7 for the phone and with some instructions it told me to wipe the phone data, use custom recovery and install the .zip and it should be fine. but it went into a boot loop and never booted up. Then I went to download My-ROM v3.3 and still did not work. then I realised it needed the original EMUI to work.
So now I'm stuck here. its been 3 days and my phone still isn't working. my recovery is TWRP.
Click to expand...
Click to collapse
What was the last official version that you were running? Give us as much information as possible.
milan-xda said:
what was the last official version that you were running? Give us as much information as possible.
Click to expand...
Click to collapse
emui 2.3 (b133sp01)
ImJustChew said:
emui 2.3 (b133sp01)
Click to expand...
Click to collapse
That explains why MyRom didn't work. Ok, do you have official UPDATE.APP (B133) on your PC?
No
ImJustChew said:
No
Click to expand...
Click to collapse
I'll dig on the internet later and post a link for you to download.
https://mega.nz/#!RptkFSCa!2y8Ti2qL7ROldNAUZTqecaCUJ03FFWaClD_Hp4Zwuvc
---------- Post added at 03:55 PM ---------- Previous post was at 03:50 PM ----------
Or this one
http://download-c.huawei.com/download/downloadCenter?downloadId=30342&version=54004&siteCode=at