Bootloop Problem after flashing stock rom via SP TOOL - Lenovo A7000 Questions & Answers

I tried flashing stock rom in my lenovo A7000a with lollipop version via SP Flash tool but it stuck in bootloop. Then i installed twrp recovery and root it and flash a custom rom "Androim 7" by thinking that it will solve my problem but it didn't. It still get stuck in bootloop. When it get first boot up in custom rom, for first time bootanimation get change a littel and then it get stuck again and every time i flash stock rom or custom rom it get stuck at bootanimation.

Did u enable da/dl with all checksum in spft?if not u must reflash it again with stock rom after enabling them in spft thats it ????????.???? :highfive:
Hit thanks if i helped

Yes, I have checked da dl all checksum in option->download

Then possible it maybe the problem with the stock rom/scatter that u used.try downloading another stock rom with its scatter.it may help

aswinp222 said:
Then possible it maybe the problem with the stock rom/scatter that u used.try downloading another stock rom with its scatter.it may help
Click to expand...
Click to collapse
I did try it by download another stock rom from *Flashing Stock Rom Via SP Flash Tool[Lenovo A7000] by*PrashantRana
But it gets into bootloop.

If bootanimation appears,dont worry just wait for long time.try rebooting with battery replacement etc:both stock and androium takes a hell lot of time to boot for first time.or else you may try flashing CM roms or the nexus MM minimal ported by myself.the wont take much time to boot up :cheers

aswinp222 said:
If bootanimation appears,dont worry just wait for long time.try rebooting with battery replacement etc:both stock and androium takes a hell lot of time to boot for first time.or else you may try flashing CM roms or the nexus MM minimal ported by myself.the wont take much time to boot up :cheers
Click to expand...
Click to collapse
I did as you said above and i downloaded cm13 and istalled it but it didnt work. I have uploaded a video see it. For first time i installed cm13 it goes to cm13 boot animation but in another boot it didnt go to cm13 boot animation. I have provided a video. Have a look.

In fact your phone is a7000a or is it a7000 plus?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
Which are the fields that you wiped before flashing the rom?
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
In spft which option did u chose?download only/firmware upgrade/format all???

aswinp222 said:
In fact your phone is a7000a or is it a7000 plus?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
Which are the fields that you wiped before flashing the rom?
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
In spft which option did u chose?download only/firmware upgrade/format all???
Click to expand...
Click to collapse
Both are same. A7000a is the model number and Lenovo A7000 Plus is official name of the Device.
I have tried two methods.
1st Method.
First I flash stock rom then I wipe data/cache/dalvik-cache.
2nd Method
I did same as above in this method but I wipe data/system/cache/dalvik-cache.
I have tried two method
1. Dowload only
2. Firware Upgrade
Third method format all didnt didnt work.
It shows some error.

A7000 and a7000plus are not the same.they got different architecture and kernel.a7000 got a 1.5ghz cpu whereas a7000plus got 1.5ghz,resembling to k3note.make sure you flash the proper firmware.choose firmware upgrade in spft.also i recomment flashing recovery only after first boot.if bootanimation appears it is likely to boot.

aswinp222 said:
A7000 and a7000plus are not the same.they got different architecture and kernel.a7000 got a 1.5ghz cpu whereas a7000plus got 1.5ghz,resembling to k3note.make sure you flash the proper firmware.choose firmware upgrade in spft.also i recomment flashing recovery only after first boot.if bootanimation appears it is likely to boot.
Click to expand...
Click to collapse
Heyy, i got boot up but It again gets reboot and and then its goes to loop. I think the problem is in Cpu Governer. So is there a way to fix cpu frequency?

just ttry flashing daredevil kernel.it got some patches for the same i hope.but i dont think that it helps.give out a try though.

aswinp222 said:
just ttry flashing daredevil kernel.it got some patches for the same i hope.but i dont think that it helps.give out a try though.
Click to expand...
Click to collapse
But the kernel is for marshmallow and my phone has lollipop
Does it wok with Cm13

Related

[Q] need help in slimkat rom

hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
harishke said:
hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
Click to expand...
Click to collapse
what i normally do using philz recovery
1) wipe data ( complete wipe to install a new rom)
2) flash slimkat rom
3) flash slim gapps
4) as im having as c6902, i need to flash modules of c6902, hence, flash the modules provided in the monx thread in Xperia Z1 android development
5) flash superuser zip to gain root access later on
6) reboot
Hey
[/COLOR]
harishke said:
hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
Click to expand...
Click to collapse
you have to download this file: https://drive.google.com/file/d/0B_3SvSLy59OXUTUweFJpWjYwd1E/edit?usp=sharing
then flash it.
Exact problem. Give This zip a try. Also can you explain what is This file do???
---------- Post added at 04:57 PM ---------- Previous post was at 04:24 PM ----------
stoan123 said:
[/COLOR]
you have to download this file: https://drive.google.com/file/d/0B_3SvSLy59OXUTUweFJpWjYwd1E/edit?usp=sharing
then flash it.
Click to expand...
Click to collapse
Working. thanks bro
Sent from my z1 on slimkat rc2
a
jobangill99 said:
Exact problem. Give This zip a try. Also can you explain what is This file do???
---------- Post added at 04:57 PM ---------- Previous post was at 04:24 PM ----------
Working. thanks bro
Sent from my z1 on slimkat rc2
Click to expand...
Click to collapse
there're diferent between c6903 and c6902. i think that is modem
you can read more detail from thread
thanks a ton guys finally it worked by flashing modem and was able to use the rom:good:

[Q] S3 Mini Telus - Custom Recovery Problems

I recently got an S3 Mini and I wanted to install cyanogenmod on it. I have experience because I have cyanogenmod on my S4 and TWRP custom recovery.
After I use Odin to flash the TWRP custom recovery to the phone, whenever I try to boot into recovery the screen just freezes and these lines and green film start to appear on the screen.
I have uploaded the picture of the phone trying to boot into recovery
Can someone please help me?
Thanks
McMahonus4 said:
I recently got an S3 Mini and I wanted to install cyanogenmod on it. I have experience because I have cyanogenmod on my S4 and TWRP custom recovery.
After I use Odin to flash the TWRP custom recovery to the phone, whenever I try to boot into recovery the screen just freezes and these lines and green film start to appear on the screen.
I have uploaded the picture of the phone trying to boot into recovery
Can someone please help me?
Thanks
Click to expand...
Click to collapse
Did you flashed TWRP from maclaw?
---------- Post added at 08:19 PM ---------- Previous post was at 07:57 PM ----------
Which model is this phone, it's not a GT-I8910 right?
Clostry said:
Did you flashed TWRP from maclaw?
---------- Post added at 08:19 PM ---------- Previous post was at 07:57 PM ----------
Which model is this phone, it's not a GT-I8910 right?
Click to expand...
Click to collapse
you're right, it can't be a I8190. Look at where the camera is (right top side). On the original it's on the left top side
koragg97 said:
you're right, it can't be a I8190. Look at where the camera is (right top side). On the original it's on the left top side
Click to expand...
Click to collapse
The photo is not clear but the camera seems where it should be to me
Just telus is a canadian company, this made me think it could be a sm-g730...
Clostry said:
The photo is not clear but the camera seems where it should be to me
Just telus is a canadian company, this made me think it could be a sm-g730...
Click to expand...
Click to collapse
There's literalyl 390248230948023948 variants of the S3 mini, fairly certain it is the SM-G730 confirm it on the model or in settings. Maclaw's recovery or any other recovery is not compatible with your phone, and as far as I know your phone does not have a recovery yet hence why it bootloops. You need to revert back to stock: forum.xda-developers.com/attachment.php?attachmentid=2530506&d=1390328847 and all shall be well. There's no active development on your phone as far as I know but do give this thread a visit: http://forum.xda-developers.com/showthread.php?t=2469413&page=11
So can it be that I'm flashing the wrong twrp file? Because I'm flashing the wrong region?? Any suggestions on how to fix this issue and get it working?
McMahonus4 said:
So can it be that I'm flashing the wrong twrp file? Because I'm flashing the wrong region?? Any suggestions on how to fix this issue and get it working?
Click to expand...
Click to collapse
It's because there is no TWRP for your device, there are no TWRP or CWM builds for the TELUS S3 MINI the ATT&T S3 MINI and the VERIZON S3 MINI.(as far as I know) Only solution is to compile it yourself, and that's quite involved but there are numerous guides out there.
I see.... Thanks anyways, I may try to compile my own, if I do get it working I will upload it here
McMahonus4 said:
I see.... Thanks anyways, I may try to compile my own, if I do get it working I will upload it here
Click to expand...
Click to collapse
http://xda-university.com/as-a-developer/porting-clockworkmod-recovery-to-a-new-device
http://www.koushikdutta.com/2010/10/porting-clockwork-recovery-to-new.html
TWRP is easier to compile after you got a working CWM recovery, as you only need to add in a couple of TWRP flags.
You need to run ubuntu natively or through virtual machine (VMWare, etc) and download the CM source code which may take a while depending on your internet speed (it's quite large about 15gb i think or so )
The same thing happened to me when I tried to install CWM for my s3 mini sm-g730w8( this is the Canadian version for telus) Boot into download mode (VOL DOWN+HOME+POWER) then just choose reboot device and it should be okay. If it still doesn't work then boot into download mode and then flash the stock rom via odin. Also regarding the custom recovery for our phone, even if you did port a working custom recovery the works for our phone, you won't be able to install it because our bootloader is locked; which is also why your screen turned green after trying to boot into your custom recovery. I found 2 possible solutions for flashing scripts and mods: kn0x0ut Toolbox http://forum.xda-developers.com/showthread.php?t=2550120 and Flash Gordon http://forum.xda-developers.com/showthread.php?t=2250555 I haven't been able to try them yet but I think kn0x0ut toolbox is more reliable. I hope this helped

[Q] Not able to install custom recovery in Xperai SP 4.3 .205 Root & BL unlocked

Hi,
I am using Xperia SP, C5302, with Android version: 4.3 and Firmware: 12.1.A.205. I want to install CyanogenMod 11 in my mobile.
Going though different tips and tricks, I was able to root my phone, as well as unlock the bootloader. However, I'm unable to install a custom recovery. It is advised everywhere not to proceed with installing any custom ROM without installing custom recovery.
Currently not able to install CWM recovery in my phone. Also when I tried to boot my phone into recovery, it is not working. Is it because there are no custom recovery installed?
If anyone can tell me how to install the custom recovery in my system, will be very helpful. I've tried installing ROM Manager from Play Store, but it is unable to recognize my device. Also Quick Boot app from Play Store is not able to boot into recovery mode. Also tried using Flashtool and fastboot, not working either. :crying:
Right now, I'm not able to proceed with installing CM11 ROM in my Xperia because I'm afraid I will not be able to boot into recovery mode and hence will not be able to complete the installation and ultimately end up with a bricked phone.
Any help will be greatly appreciated..!!
Regards,
~Ayan
here the link: http://forum.xda-developers.com/showthread.php?t=2649923
but if you want to install a rom (on UBL) this is not mandatory to use recovery before bcoz before flahing the rom u have to flash the boot.img of that rom and it contains recovery... so it is good when u are on a UBL...
or just flash a kernel that have recovery
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
psss... after installing recovery take nandroid backup of current rom..... if will help you when you encounter a bootloop
Nevermind...
deathviper said:
here the link: http://forum.xda-developers.com/showthread.php?t=2649923
but if you want to install a rom (on UBL) this is not mandatory to use recovery before bcoz before flahing the rom u have to flash the boot.img of that rom and it contains recovery... so it is good when u are on a UBL...
or just flash a kernel that have recovery
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
psss... after installing recovery take nandroid backup of current rom..... if will help you when you encounter a bootloop
Click to expand...
Click to collapse
Thanks deathviper. Followed the instructions and got it installed. Also completed installing CM11 ROM in my Xperia. The link was very helpful. I also followed this link: http://www.teamandroid.com/2014/03/...11-xperia-sp-c5302-c5303-kitkat-custom-rom/2/ to install CM11 ROM in my Xperia SP.
Thanks again..!!
rbertoche said:
I've allways thought that a locked bootloader would break your boot to a non-stock kernel. I think I read it from doomlord.
Now I wonder if it only blocks fastboot...
Recently I saw a post about CM10.2 working on locked devices... Now you're saying the same, maybe it started working lately somehow...
Though... Sure you saw that work?
I'm about to relock my device and take my chances, should get to it
Update: You may not want to test something for the first time... This one is tested: http://forum.xda-developers.com/showthread.php?t=2649923
It's a much longer way. To start with you must get root and CWM recovery on 4.1.2, only to get ROOT on 4.3.
Click to expand...
Click to collapse
i was talking bout ubl.... not lbl
Oh... I got it all wrong =p sorry
Sent from my C5303 using XDA Free mobile app
rbertoche said:
Oh... I got it all wrong =p sorry
Sent from my C5303 using XDA Free mobile app
Click to expand...
Click to collapse
no prb.... always try to clear your thought and others tooo...
deathviper said:
no prb.... always try to clear your thought and others tooo...
Click to expand...
Click to collapse
I flashed my xperia sp ( same firmware ) to candy5 using the same method . But I did not flash Gapps in one go . After booting the new ROM everything works fine but I am unable to get into recovery now( remains stuck in sony logo) . I used Rashr , the CWM SP too which I used it when my phone was on stock ROM . Left without essential Gaaps . Please help .
you can do this
Download xperia recovery manager from play store

Galaxy Note 5 SM-N920T Stock ROM wiped with TWRP Custom ROM not working. Need Help?

Hello People of XDA..
I am unable to flash any rom to my note 5..
Device: Samsung Galaxy Note 5 SM-N920T (T-Mobile)
Status:
TWRP Flashed and Working
Download Mode Working.
Detected by Odin3_v3.10.7
It was rooted before i wiped everything.
( I had some problem in the display and after reading online I thought of flashing a custom ROM hoping that might solve problem. I suddenly got a green line in my display.. someone suggested it could be a software issue.. and some googling showed it occured in some samsung devices... so i thought of wiping off everything and trying a custom rom...)
I Wiped:
Dalvik/ART Cache
System
Data
Internal Storage
Cache
Then it restarted and stuck on the Samsung Logo..
Then Tried to Install This ROM: Hyperdrive RLS5
Step by Step as advised in the forum.
but it stucks at the Black Screen after Samsung Logo..
Then I Tried This T-Mobile Galaxy Note 5 SM-N920T to Stock 5.1.1 Lollipop Firmware using Odin3_v3.10.7 but it Fails
Odin3 Screenshot http://i.imgur.com/7efYkPl.png
Please Tell me any Rom which can work ....I just need to fix this phone with any Rom..
Is there any kernal missing or something? i am unable to understand about kernals...
I bought this phone for aboutt 475 USD with hard earned money, used only a week i really feel depressed please if anyone could help me solve this problem... Thanks in Advance..
Download stock firmware from Sammobile flash it via Odin
---------- Post added at 03:09 AM ---------- Previous post was at 03:02 AM ----------
Try flashing marshmallow firmware and see if pass and never wipe internal storage
---------- Post added at 03:14 AM ---------- Previous post was at 03:09 AM ----------
https://www.androidfilehost.com/?fid=24651442761498722
Try this rom
---------- Post added at 03:18 AM ---------- Previous post was at 03:14 AM ----------
Flash rom go through aroma settings then click finish but don't reboot flash this kernel http://arter97.com/browse/exynos7420/kernel/21.1/n920tw8/arter97-kernel-n920tw8-21.1.zip and boot
Zenngn said:
Download stock firmware from Sammobile flash it via Odin
Try flashing marshmallow firmware and see if pass and never wipe internal storage
Try this rom
Flash rom go through aroma settings then click finish but don't reboot flash this kernel
Click to expand...
Click to collapse
Okay Bro I Try All of this and let you know
[/COLOR]Flash rom go through aroma settings then click finish but don't reboot flash this kernel arter97 . com/browse/ exynos7420/ kernel/ 21.1/ n920tw8/ arter97-kernel- n920tw8- 21.1. zip .......... and boot
Click to expand...
Click to collapse
Can anyone help me with this part of the solution dont reboot and flash kernal...
after flashing SICK AS HELL ROM Am I suppose "not" to reboot from TWRP and go back and copy arter97 kernal in my phone and flash it and then reboot?
_______________________________________
One more then ... when i flashed the Hyperdrive Rom... I remember reading .. "there was no kernal found or something" in the end of installation.... is that is what is causing problem?
empowercb said:
Can anyone help me with this part of the solution dont reboot and flash kernal...
after flashing SICK AS HELL ROM Am I suppose "not" to reboot from TWRP and go back and copy arter97 kernal in my phone and flash it and then reboot?
_______________________________________
One more then ... when i flashed the Hyperdrive Rom... I remember reading .. "there was no kernal found or something" in the end of installation.... is that is what is causing problem?
Click to expand...
Click to collapse
Yup, there was no kernel installed with your rom and you erupted the old one...flash stock modified, arter 21, or latest available skyhigh kernel and you'll boot...OR find a custom rom pkg that includes a kernel...
Sent from my SM-N920T using Tapatalk

Too much battery drain

Im tried all roms. All kernals but still battery draining too fast on my spic mi 498h
Me tooo... i think batterty is dead
I really don't understand how or why but unfortunately my phone Micromax AQ4501 (ANDROID ONE) which was rooted in January 2017 by using Android one toolkit available at XDA , and since then I was using custom rom and many time I had changed it and recently I had installed Magisk while installing the rom via Custom Recovery Twrp 2.8.5 which was available with the Android One Toolkit but when after sometime when I decided to change my rom from Lineage 6.0.1 to AOSP and this time I actually forgot to wipe up and then straight away while installing first the error came that due to insufficient storage I can't install then when I did factory reset on TWRP it said can mount system, data....Etc.(can see image (
https://drive.google.com/folderview?id=1J1FqJdcJAuga75oUzkPnDc6_5sWU5h-b )) and said that the factory reset failed, then when I researched Youtube about this I got to know that I should format but this also gave me the same result so I really request to please suggest me a solution....
I think your flash memory is dead, a common problem with this phone .
Solution??
MihaiSG said:
I think your flash memory is dead, a common problem with this phone .
Click to expand...
Click to collapse
So no solution.....sir please I really want the device to get fixed as you see the twrp recovery is loading.....
---------- Post added at 02:59 PM ---------- Previous post was at 02:47 PM ----------
MihaiSG said:
I think your flash memory is dead, a common problem with this phone .
Click to expand...
Click to collapse
One thing more that earlier when this problem occurred in the mount option the system was ticked but after seeing some YouTube videos I had tried to repair the system partion but changing and rechanging it after which the tick which was present on system also vanished in the mount option as like others and cant it be problem with the version of twrp and then how can I install new version of twrp recovery... Sir please I really want the solution please see as you are Pro.......

Categories

Resources