hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
harishke said:
hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
Click to expand...
Click to collapse
what i normally do using philz recovery
1) wipe data ( complete wipe to install a new rom)
2) flash slimkat rom
3) flash slim gapps
4) as im having as c6902, i need to flash modules of c6902, hence, flash the modules provided in the monx thread in Xperia Z1 android development
5) flash superuser zip to gain root access later on
6) reboot
Hey
[/COLOR]
harishke said:
hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
Click to expand...
Click to collapse
you have to download this file: https://drive.google.com/file/d/0B_3SvSLy59OXUTUweFJpWjYwd1E/edit?usp=sharing
then flash it.
Exact problem. Give This zip a try. Also can you explain what is This file do???
---------- Post added at 04:57 PM ---------- Previous post was at 04:24 PM ----------
stoan123 said:
[/COLOR]
you have to download this file: https://drive.google.com/file/d/0B_3SvSLy59OXUTUweFJpWjYwd1E/edit?usp=sharing
then flash it.
Click to expand...
Click to collapse
Working. thanks bro
Sent from my z1 on slimkat rc2
a
jobangill99 said:
Exact problem. Give This zip a try. Also can you explain what is This file do???
---------- Post added at 04:57 PM ---------- Previous post was at 04:24 PM ----------
Working. thanks bro
Sent from my z1 on slimkat rc2
Click to expand...
Click to collapse
there're diferent between c6903 and c6902. i think that is modem
you can read more detail from thread
thanks a ton guys finally it worked by flashing modem and was able to use the rom:good:
Related
please how to flash stunner 2 in my n7000 , i'm in ultimate rom v5.1
Ultimate already has a safe kernel. Boot into recovery and go to philz settings and choose clean before new rom install. Once done then install zip and choose the rom.
nokiamodeln91 said:
Ultimate already has a safe kernel. Boot into recovery and go to philz settings and choose clean before new rom install. Once done then install zip and choose the rom.
Click to expand...
Click to collapse
but they say that the phone must to be in cm10 and i tried to install cm10 attached in the rom thread and operation failed "install aborted"
You need to update philz kernel to 3.99 or above. Then it will work.. It's safe to install the rom when you have philz kernel.
nokiamodeln91 said:
You need to update philz kernel to 3.99 or above. Then it will work.. It's safe to install the rom when you have philz kernel.
Click to expand...
Click to collapse
i did as u say they tell operation aborted and tell me that message status 7
Download hydracore, go into recovery flash that (do not reboot) and go to advanced and reboot recovery... once you're in the new recovery do all the necessary wipes and install
https://sourceforge.net/projects/maxfuacm/files/Galaxy Note/MaxFu_HydraCore/n5.JBT/
Eng_sabba7 said:
i did as u say they tell operation aborted and tell me that message status 7
Click to expand...
Click to collapse
Also check the md5 of the downloaded rom. May be that is corrupt
nokiamodeln91 said:
Also check the md5 of the downloaded rom. May be that is corrupt
Click to expand...
Click to collapse
i tried to use another copy of ultimate rom .zip file and putting it in the memory card it work until finish setup rom :victory: put then device restart to recovery screen again i tried to select "reboot system now " put device restart again to recovery !!!!!!!!!!!!!!! wat to do friend
Boot into recovery recovery and do a factory reset. And then reboot.
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
So this time the flash finished well?
nokiamodeln91 said:
Boot into recovery recovery and do a factory reset. And then reboot.
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
So this time the flash finished well?
Click to expand...
Click to collapse
i had select wipe data / factory reset >>> that operation finished then i restart device :crying: put it's show samsung screen then closed or restart then samsung screen then recovery screen again
Eng_sabba7 said:
i had select wipe data / factory reset >>> that operation finished then i restart device :crying: put it's show samsung screen then closed or restart then samsung screen then recovery screen again
Click to expand...
Click to collapse
U are an Indian the best in programming in all the world u must to have a solution
Ok go to recovery again and then to philz settings and choose clean before new rom install. Once that's done. Install the rom again and check.
nokiamodeln91 said:
Ok go to recovery again and then to philz settings and choose clean before new rom install. Once that's done. Install the rom again and check.
Click to expand...
Click to collapse
i did that before >>>> but will try again MANY THANKS FOR UR EFFORTS
Ok let's see what happens.
the same problem i despair <<<<<
Better now put the phone in download mode and flash a stock rom. If you choose ics then do not wipe on stock recovery.
flash by odin ???
???
---------- Post added at 07:54 PM ---------- Previous post was at 07:16 PM ----------
Download a stock rom. Follow this thread
http://forum.xda-developers.com/showthread.php?t=1424997
i mean flash rom using odin program ?
Yes. This way you will get back to factory settings.
Hi all,
I know this is not the right area but I'm not able to post in the DEV board...
I'm using i9001 and now I'm on [ROM][JB][4.2.2][JDQ39E] CyanogenMod 10.1 by ADC Team - Release 5 - Kernel 3.4.x
I've also TWRP 2.6.0.0 Recovery on the phone because CWM has a lot of issues.
ROM and TWRP are from this page: http://forum.xda-developers.com/showthread.php?t=2315448
When I try to do a backup with TWRP my screen turns black after some time. The screen turns also black when I disable screen timeout.
Also when I'm in the main menu of TWRP screen goes black after some time.
When screen was turned off I'm not able to return to TWRP. I have to restart the phone.
Three questions:
Does anyone of you have the same issue and maybe solved that?
Does the backup fail when screen is black or is the backup finished in backgroud? Anyone knowing that or knows how to check?
Kind regards
Lukas
lok1411 said:
Hi all,
I know this is not the right area but I'm not able to post in the DEV board...
I'm using i9001 and now I'm on [ROM][JB][4.2.2][JDQ39E] CyanogenMod 10.1 by ADC Team - Release 5 - Kernel 3.4.x
I've also TWRP 2.6.0.0 Recovery on the phone because CWM has a lot of issues.
ROM and TWRP are from this page: http://forum.xda-developers.com/showthread.php?t=2315448
When I try to do a backup with TWRP my screen turns black after some time. The screen turns also black when I disable screen timeout.
Also when I'm in the main menu of TWRP screen goes black after some time.
When screen was turned off I'm not able to return to TWRP. I have to restart the phone.
Three questions:
Does anyone of you have the same issue and maybe solved that?
Does the backup fail when screen is black or is the backup finished in backgroud? Anyone knowing that or knows how to check?
Kind regards
Lukas
Click to expand...
Click to collapse
I had the same issue.
you can fix it by installing another version of twrp.
(I am not allowed to post links)
different twrp versions:
forum.xda-developers.com/showthread.php?t=2129298
Thank you!
which version are you runnung on your I9001
Then I can take the same if you are saying that this is stable
lok1411 said:
Thank you!
which version are you runnung on your I9001
Then I can take the same if you are saying that this is stable
Click to expand...
Click to collapse
my phone is flashed to stock.
I go flash the recovery and i will report you.
---------- Post added at 03:17 PM ---------- Previous post was at 02:39 PM ----------
lok1411 said:
Thank you!
which version are you runnung on your I9001
Then I can take the same if you are saying that this is stable
Click to expand...
Click to collapse
rdrai said:
my phone is flashed to stock.
I go flash the recovery and i will report you.
Click to expand...
Click to collapse
twrp 2.2.1 is stable for me.
you can download it from mediafire.
mediafire.com/download/0ufe8dcv5kkajay/twrp2.2.1-recovery.zip
please report the result back
If it worked please hit the thanks button
Hi,
thanks for your help.
some more questions regarding TWRP.
Acutally I'm running2.6.0.0
Is it possible to "downgrade" to a lower version?
Backups of 2.6.0.0 won't be used in oder versions, right?
How to deploy a downgrade? Can I just do it as an upgrad and install from zip or are there any specials.
Just replacing would work or is it a bricked version which means I have to reinstall CM10.1 and other stuff?
Last: What deffers your build from the http://forum.xda-developers.com/showthread.php?t=2129298 => TWRP => Old releases => [2.2.2.1] [1] ?
Or can this be also used?
To downgrade your recovery, just download the zip-file for twrp 2.2.1 and flash it via recovery. I don't know if your 2.6.0.0-backups will work with 2.2.1, but i would rather say no.
There shouldn't be any differences between the recovery from rdai's link and yours, you can take any of them.
Greetings, käsebr0t
Sent from my GT-I9001 using xda app-developers app
käsebr0t said:
To downgrade your recovery, just download the zip-file for twrp 2.2.1 and flash it via recovery
Click to expand...
Click to collapse
ceese! sorry chears!
You mean boot into TWRP, klick install and choose the 2.2.1 zip and install.
Or what you mean by flash via recovery.
Sorry for the stupid questions.
lok1411 said:
ceese! sorry chears!
You mean boot into TWRP, klick install and choose the 2.2.1 zip and install.
Or what you mean by flash via recovery.
Sorry for the stupid questions.
Click to expand...
Click to collapse
no thanks for me !?!
---------- Post added at 12:01 PM ---------- Previous post was at 11:25 AM ----------
lok1411 said:
ceese! sorry chears!
You mean boot into TWRP, klick install and choose the 2.2.1 zip and install.
Or what you mean by flash via recovery.
Sorry for the stupid questions.
Click to expand...
Click to collapse
twrp 2.2.1 and 2.2.2.1 are different versions, flash 2.2.1 from mediafire as i told.
Yes flash in twrp
Hi
rdrai said:
no thanks for me
Click to expand...
Click to collapse
now thanks to all for answering my stupid nerd questions!
And special thanks to rdrai for your twrp version
just installed your zip and tried to backup afterwards. Was running fine. no black screen or shutdown during backing up. Backup don within 155 secs.
Added your twrp version directly to my folder where I've stored the stable versions for CM10.1 and gaaps. Now you are also in and I have all for a pure, stalbe reset of the phone if needed.
Once more many thanks!
one more question. I added the flag "this post is a question"
Is it possible to somehow set this thread as "solved" ?
lok1411 said:
one more question. I added the flag "this post is a question"
Is it possible to somehow set this thread as "solved" ?
Click to expand...
Click to collapse
Glad to hear your problem is solved. :highfive:
i am also new on xda but i think if you add solved in the threat name then its marked as solved.
Threat title : (SOLVED) Issue with TWRP on I9001:good:
Sorry for bad english i am dutch.
Hi,
I am using Xperia SP, C5302, with Android version: 4.3 and Firmware: 12.1.A.205. I want to install CyanogenMod 11 in my mobile.
Going though different tips and tricks, I was able to root my phone, as well as unlock the bootloader. However, I'm unable to install a custom recovery. It is advised everywhere not to proceed with installing any custom ROM without installing custom recovery.
Currently not able to install CWM recovery in my phone. Also when I tried to boot my phone into recovery, it is not working. Is it because there are no custom recovery installed?
If anyone can tell me how to install the custom recovery in my system, will be very helpful. I've tried installing ROM Manager from Play Store, but it is unable to recognize my device. Also Quick Boot app from Play Store is not able to boot into recovery mode. Also tried using Flashtool and fastboot, not working either. :crying:
Right now, I'm not able to proceed with installing CM11 ROM in my Xperia because I'm afraid I will not be able to boot into recovery mode and hence will not be able to complete the installation and ultimately end up with a bricked phone.
Any help will be greatly appreciated..!!
Regards,
~Ayan
here the link: http://forum.xda-developers.com/showthread.php?t=2649923
but if you want to install a rom (on UBL) this is not mandatory to use recovery before bcoz before flahing the rom u have to flash the boot.img of that rom and it contains recovery... so it is good when u are on a UBL...
or just flash a kernel that have recovery
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
psss... after installing recovery take nandroid backup of current rom..... if will help you when you encounter a bootloop
Nevermind...
deathviper said:
here the link: http://forum.xda-developers.com/showthread.php?t=2649923
but if you want to install a rom (on UBL) this is not mandatory to use recovery before bcoz before flahing the rom u have to flash the boot.img of that rom and it contains recovery... so it is good when u are on a UBL...
or just flash a kernel that have recovery
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
psss... after installing recovery take nandroid backup of current rom..... if will help you when you encounter a bootloop
Click to expand...
Click to collapse
Thanks deathviper. Followed the instructions and got it installed. Also completed installing CM11 ROM in my Xperia. The link was very helpful. I also followed this link: http://www.teamandroid.com/2014/03/...11-xperia-sp-c5302-c5303-kitkat-custom-rom/2/ to install CM11 ROM in my Xperia SP.
Thanks again..!!
rbertoche said:
I've allways thought that a locked bootloader would break your boot to a non-stock kernel. I think I read it from doomlord.
Now I wonder if it only blocks fastboot...
Recently I saw a post about CM10.2 working on locked devices... Now you're saying the same, maybe it started working lately somehow...
Though... Sure you saw that work?
I'm about to relock my device and take my chances, should get to it
Update: You may not want to test something for the first time... This one is tested: http://forum.xda-developers.com/showthread.php?t=2649923
It's a much longer way. To start with you must get root and CWM recovery on 4.1.2, only to get ROOT on 4.3.
Click to expand...
Click to collapse
i was talking bout ubl.... not lbl
Oh... I got it all wrong =p sorry
Sent from my C5303 using XDA Free mobile app
rbertoche said:
Oh... I got it all wrong =p sorry
Sent from my C5303 using XDA Free mobile app
Click to expand...
Click to collapse
no prb.... always try to clear your thought and others tooo...
deathviper said:
no prb.... always try to clear your thought and others tooo...
Click to expand...
Click to collapse
I flashed my xperia sp ( same firmware ) to candy5 using the same method . But I did not flash Gapps in one go . After booting the new ROM everything works fine but I am unable to get into recovery now( remains stuck in sony logo) . I used Rashr , the CWM SP too which I used it when my phone was on stock ROM . Left without essential Gaaps . Please help .
you can do this
Download xperia recovery manager from play store
Hello People of XDA..
I am unable to flash any rom to my note 5..
Device: Samsung Galaxy Note 5 SM-N920T (T-Mobile)
Status:
TWRP Flashed and Working
Download Mode Working.
Detected by Odin3_v3.10.7
It was rooted before i wiped everything.
( I had some problem in the display and after reading online I thought of flashing a custom ROM hoping that might solve problem. I suddenly got a green line in my display.. someone suggested it could be a software issue.. and some googling showed it occured in some samsung devices... so i thought of wiping off everything and trying a custom rom...)
I Wiped:
Dalvik/ART Cache
System
Data
Internal Storage
Cache
Then it restarted and stuck on the Samsung Logo..
Then Tried to Install This ROM: Hyperdrive RLS5
Step by Step as advised in the forum.
but it stucks at the Black Screen after Samsung Logo..
Then I Tried This T-Mobile Galaxy Note 5 SM-N920T to Stock 5.1.1 Lollipop Firmware using Odin3_v3.10.7 but it Fails
Odin3 Screenshot http://i.imgur.com/7efYkPl.png
Please Tell me any Rom which can work ....I just need to fix this phone with any Rom..
Is there any kernal missing or something? i am unable to understand about kernals...
I bought this phone for aboutt 475 USD with hard earned money, used only a week i really feel depressed please if anyone could help me solve this problem... Thanks in Advance..
Download stock firmware from Sammobile flash it via Odin
---------- Post added at 03:09 AM ---------- Previous post was at 03:02 AM ----------
Try flashing marshmallow firmware and see if pass and never wipe internal storage
---------- Post added at 03:14 AM ---------- Previous post was at 03:09 AM ----------
https://www.androidfilehost.com/?fid=24651442761498722
Try this rom
---------- Post added at 03:18 AM ---------- Previous post was at 03:14 AM ----------
Flash rom go through aroma settings then click finish but don't reboot flash this kernel http://arter97.com/browse/exynos7420/kernel/21.1/n920tw8/arter97-kernel-n920tw8-21.1.zip and boot
Zenngn said:
Download stock firmware from Sammobile flash it via Odin
Try flashing marshmallow firmware and see if pass and never wipe internal storage
Try this rom
Flash rom go through aroma settings then click finish but don't reboot flash this kernel
Click to expand...
Click to collapse
Okay Bro I Try All of this and let you know
[/COLOR]Flash rom go through aroma settings then click finish but don't reboot flash this kernel arter97 . com/browse/ exynos7420/ kernel/ 21.1/ n920tw8/ arter97-kernel- n920tw8- 21.1. zip .......... and boot
Click to expand...
Click to collapse
Can anyone help me with this part of the solution dont reboot and flash kernal...
after flashing SICK AS HELL ROM Am I suppose "not" to reboot from TWRP and go back and copy arter97 kernal in my phone and flash it and then reboot?
_______________________________________
One more then ... when i flashed the Hyperdrive Rom... I remember reading .. "there was no kernal found or something" in the end of installation.... is that is what is causing problem?
empowercb said:
Can anyone help me with this part of the solution dont reboot and flash kernal...
after flashing SICK AS HELL ROM Am I suppose "not" to reboot from TWRP and go back and copy arter97 kernal in my phone and flash it and then reboot?
_______________________________________
One more then ... when i flashed the Hyperdrive Rom... I remember reading .. "there was no kernal found or something" in the end of installation.... is that is what is causing problem?
Click to expand...
Click to collapse
Yup, there was no kernel installed with your rom and you erupted the old one...flash stock modified, arter 21, or latest available skyhigh kernel and you'll boot...OR find a custom rom pkg that includes a kernel...
Sent from my SM-N920T using Tapatalk
I tried flashing stock rom in my lenovo A7000a with lollipop version via SP Flash tool but it stuck in bootloop. Then i installed twrp recovery and root it and flash a custom rom "Androim 7" by thinking that it will solve my problem but it didn't. It still get stuck in bootloop. When it get first boot up in custom rom, for first time bootanimation get change a littel and then it get stuck again and every time i flash stock rom or custom rom it get stuck at bootanimation.
Did u enable da/dl with all checksum in spft?if not u must reflash it again with stock rom after enabling them in spft thats it ????????.???? :highfive:
Hit thanks if i helped
Yes, I have checked da dl all checksum in option->download
Then possible it maybe the problem with the stock rom/scatter that u used.try downloading another stock rom with its scatter.it may help
aswinp222 said:
Then possible it maybe the problem with the stock rom/scatter that u used.try downloading another stock rom with its scatter.it may help
Click to expand...
Click to collapse
I did try it by download another stock rom from *Flashing Stock Rom Via SP Flash Tool[Lenovo A7000] by*PrashantRana
But it gets into bootloop.
If bootanimation appears,dont worry just wait for long time.try rebooting with battery replacement etc:both stock and androium takes a hell lot of time to boot for first time.or else you may try flashing CM roms or the nexus MM minimal ported by myself.the wont take much time to boot up :cheers
aswinp222 said:
If bootanimation appears,dont worry just wait for long time.try rebooting with battery replacement etc:both stock and androium takes a hell lot of time to boot for first time.or else you may try flashing CM roms or the nexus MM minimal ported by myself.the wont take much time to boot up :cheers
Click to expand...
Click to collapse
I did as you said above and i downloaded cm13 and istalled it but it didnt work. I have uploaded a video see it. For first time i installed cm13 it goes to cm13 boot animation but in another boot it didnt go to cm13 boot animation. I have provided a video. Have a look.
In fact your phone is a7000a or is it a7000 plus?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
Which are the fields that you wiped before flashing the rom?
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
In spft which option did u chose?download only/firmware upgrade/format all???
aswinp222 said:
In fact your phone is a7000a or is it a7000 plus?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
Which are the fields that you wiped before flashing the rom?
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
In spft which option did u chose?download only/firmware upgrade/format all???
Click to expand...
Click to collapse
Both are same. A7000a is the model number and Lenovo A7000 Plus is official name of the Device.
I have tried two methods.
1st Method.
First I flash stock rom then I wipe data/cache/dalvik-cache.
2nd Method
I did same as above in this method but I wipe data/system/cache/dalvik-cache.
I have tried two method
1. Dowload only
2. Firware Upgrade
Third method format all didnt didnt work.
It shows some error.
A7000 and a7000plus are not the same.they got different architecture and kernel.a7000 got a 1.5ghz cpu whereas a7000plus got 1.5ghz,resembling to k3note.make sure you flash the proper firmware.choose firmware upgrade in spft.also i recomment flashing recovery only after first boot.if bootanimation appears it is likely to boot.
aswinp222 said:
A7000 and a7000plus are not the same.they got different architecture and kernel.a7000 got a 1.5ghz cpu whereas a7000plus got 1.5ghz,resembling to k3note.make sure you flash the proper firmware.choose firmware upgrade in spft.also i recomment flashing recovery only after first boot.if bootanimation appears it is likely to boot.
Click to expand...
Click to collapse
Heyy, i got boot up but It again gets reboot and and then its goes to loop. I think the problem is in Cpu Governer. So is there a way to fix cpu frequency?
just ttry flashing daredevil kernel.it got some patches for the same i hope.but i dont think that it helps.give out a try though.
aswinp222 said:
just ttry flashing daredevil kernel.it got some patches for the same i hope.but i dont think that it helps.give out a try though.
Click to expand...
Click to collapse
But the kernel is for marshmallow and my phone has lollipop
Does it wok with Cm13