[Q] Help to flash stunner 2 from ultimate jb - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

please how to flash stunner 2 in my n7000 , i'm in ultimate rom v5.1

Ultimate already has a safe kernel. Boot into recovery and go to philz settings and choose clean before new rom install. Once done then install zip and choose the rom.

nokiamodeln91 said:
Ultimate already has a safe kernel. Boot into recovery and go to philz settings and choose clean before new rom install. Once done then install zip and choose the rom.
Click to expand...
Click to collapse
but they say that the phone must to be in cm10 and i tried to install cm10 attached in the rom thread and operation failed "install aborted"

You need to update philz kernel to 3.99 or above. Then it will work.. It's safe to install the rom when you have philz kernel.

nokiamodeln91 said:
You need to update philz kernel to 3.99 or above. Then it will work.. It's safe to install the rom when you have philz kernel.
Click to expand...
Click to collapse
i did as u say they tell operation aborted and tell me that message status 7

Download hydracore, go into recovery flash that (do not reboot) and go to advanced and reboot recovery... once you're in the new recovery do all the necessary wipes and install
https://sourceforge.net/projects/maxfuacm/files/Galaxy Note/MaxFu_HydraCore/n5.JBT/

Eng_sabba7 said:
i did as u say they tell operation aborted and tell me that message status 7
Click to expand...
Click to collapse
Also check the md5 of the downloaded rom. May be that is corrupt

nokiamodeln91 said:
Also check the md5 of the downloaded rom. May be that is corrupt
Click to expand...
Click to collapse
i tried to use another copy of ultimate rom .zip file and putting it in the memory card it work until finish setup rom :victory: put then device restart to recovery screen again i tried to select "reboot system now " put device restart again to recovery !!!!!!!!!!!!!!! wat to do friend

Boot into recovery recovery and do a factory reset. And then reboot.
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
So this time the flash finished well?

nokiamodeln91 said:
Boot into recovery recovery and do a factory reset. And then reboot.
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
So this time the flash finished well?
Click to expand...
Click to collapse
i had select wipe data / factory reset >>> that operation finished then i restart device :crying: put it's show samsung screen then closed or restart then samsung screen then recovery screen again

Eng_sabba7 said:
i had select wipe data / factory reset >>> that operation finished then i restart device :crying: put it's show samsung screen then closed or restart then samsung screen then recovery screen again
Click to expand...
Click to collapse
U are an Indian the best in programming in all the world u must to have a solution

Ok go to recovery again and then to philz settings and choose clean before new rom install. Once that's done. Install the rom again and check.

nokiamodeln91 said:
Ok go to recovery again and then to philz settings and choose clean before new rom install. Once that's done. Install the rom again and check.
Click to expand...
Click to collapse
i did that before >>>> but will try again MANY THANKS FOR UR EFFORTS

Ok let's see what happens.

the same problem i despair <<<<<

Better now put the phone in download mode and flash a stock rom. If you choose ics then do not wipe on stock recovery.

flash by odin ???

???
---------- Post added at 07:54 PM ---------- Previous post was at 07:16 PM ----------
Download a stock rom. Follow this thread
http://forum.xda-developers.com/showthread.php?t=1424997

i mean flash rom using odin program ?

Yes. This way you will get back to factory settings.

Related

[Q] Flashing CM9,1

Well,
I have a Galaxy Note on hands trying to install CM9.1. It was with Official rom ICS 4.0.3. I flashed it without doing the 3 wipes, and after I flashed the rom i tried to wipe data/factory reset. Then the phone would turn off everytime. So, I tought it must be because I didn't flash, then I'm trying to go back to GB, like the tutorial we have in XDA, but I'm stuck at NAND Write Start! Cache.img, and it doesn't proceed, no error messages.
What should I do?
help!
was the 4.0.3 rooted? did you have CWM with kernel or did you use CWM.zip?
nokiamodeln91 said:
was the 4.0.3 rooted? did you have CWM with kernel or did you use CWM.zip?
Click to expand...
Click to collapse
I rooted it first, and after root i used CWM.zip file.
why?
CWM.zip file is known to cause bricks. What kernel where you on? do you remember installing a custom kernel?
---------- Post added at 01:27 AM ---------- Previous post was at 01:26 AM ----------
also it would be good it you can post the screen shot of odin .. how you selected the rom files and where.
nokiamodeln91 said:
CWM.zip file is known to cause bricks. What kernel where you on? do you remember installing a custom kernel?
---------- Post added at 01:27 AM ---------- Previous post was at 01:26 AM ----------
also it would be good it you can post the screen shot of odin .. how you selected the rom files and where.
Click to expand...
Click to collapse
I installed HydraCore 7.0 STD
msedek could be right.. if you can walk us through the procedure on how you tried to install the CM rom.. we could confirm a brick,,
nokiamodeln91 said:
msedek could be right.. if you can walk us through the procedure on how you tried to install the CM rom.. we could confirm a brick,,
Click to expand...
Click to collapse
Well
I was with Official Firmware 4.0.3. Then:
1. Installed Super SU
2. Installed CWM.zip
3. Installed CM9.1
4. Wipe data/factory Reset
5. Auto reboot the device, and styck on boot screen
6. Back to Recovery
6.1 Installed Hydracore 7.0 STD
7. Wipe cache and Wipe Dalwik
8. Tried to wipe Data/factory Reset
9. Auto-reboot and yet locked on boot screen
10 Download Mode
11. trying to install GB official rom and locked in Cache writing.
I need help because it is my boss's phone. I have a galaxy note and because of this procedure that worked fine on mine I did that.
Any help to solve this hard brick?
Anyone? I need help
Really desperate here.
Installing a rom using temp cwm.zip could have done the trick to brick your phone. Anyhow. Could you paste the odin logs.
nokiamodeln91 said:
Installing a rom using temp cwm.zip could have done the trick to brick your phone. Anyhow. Could you paste the odin logs.
Click to expand...
Click to collapse
oh,
I'm not anymore in the PC where I tried Odin. But the logs were pretty usual, stopping at NAND Write Start
like this image
http://forum.xda-developers.com/attachment.php?attachmentid=1224997&stc=1&d=1343392025
And I also tried to install ICS room 4.0.3. That went on till factoryfs.img, then stoped.
Super Brick? Really? How's that possible?
provettirodolfo said:
oh,
I'm not anymore in the PC where I tried Odin. But the logs were pretty usual, stopping at NAND Write Start
like this image
http://forum.xda-developers.com/attachment.php?attachmentid=1224997&stc=1&d=1343392025
And I also tried to install ICS room 4.0.3. That went on till factoryfs.img, then stoped.
Super Brick? Really? How's that possible?
Click to expand...
Click to collapse
The stopping at "factoryfs.img" in combination with using the temporary recovery in cwm.zip is typical for a bricked device.
Please read hg42's thread for checking the bad sectors and for a workaround by repartitioning (this will exclude the bad parts from using it). But first check the eMMC with his method for errors and real confirmation of the brick.
A complete repair is only possible with a replacement of the motherboard by Samsung.

[Q] Unroot help needed :)

Hi.
I have rooted my phone and it has Ultimate JB rom on it ( 4.1.2 ).But the usb port on the bottom of the phone is now broken and i need to take my note to the warranty ( with an original samsung software ) but i dont know any way to unroot without using pc.
I have heard about an app called Mobile Odin and that you can unroot with it but i wanted to ask you guys as you are pros
And if you can unroot with Mobile Odin can you make a short step by step tutorial.
Thanks !
Download a stock rom.
Put it on sd card if you cannot transfer to phone
Open mobile odin. Choose the "open file" option and select the rom you downloaded. It will fill up all partitions. Then flash.
If you choose to install IcS make sure not to wipe after installation.
just flash back ics n untick all from everoot .
u can find video at YouTube too.
nokiamodeln91 said:
Download a stock rom.
Put it on sd card if you cannot transfer to phone
Open mobile odin. Choose the "open file" option and select the rom you downloaded. It will fill up all partitions. Then flash.
If you choose to install IcS make sure not to wipe after installation.
Click to expand...
Click to collapse
But can i install GB then full wipe and update to ics ota ?
Yes.
---------- Post added at 12:19 AM ---------- Previous post was at 12:16 AM ----------
But if ota don't work the you will be stuck with GB non rooted.
nokiamodeln91 said:
Yes.
---------- Post added at 12:19 AM ---------- Previous post was at 12:16 AM ----------
But if ota don't work the you will be stuck with GB non rooted.
Click to expand...
Click to collapse
Ok but if i do a full wipe before unrooting and the only app that i install will be mobile odin will it be fine then ?
(Is it even needed to do a full wipe)
As coming from JB, after installing ics you may need a full wipe.
Latest version of mobile odin has an option of wipe data during installation. So you could try that.
I think you can flash the LC1-OXA with MobileOdin. This rom make a full wipe after installing. Then you can go to the warrantly. No need to put Ics.
Envoyé depuis mon N7000

[Q] need help in slimkat rom

hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
harishke said:
hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
Click to expand...
Click to collapse
what i normally do using philz recovery
1) wipe data ( complete wipe to install a new rom)
2) flash slimkat rom
3) flash slim gapps
4) as im having as c6902, i need to flash modules of c6902, hence, flash the modules provided in the monx thread in Xperia Z1 android development
5) flash superuser zip to gain root access later on
6) reboot
Hey
[/COLOR]
harishke said:
hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
Click to expand...
Click to collapse
you have to download this file: https://drive.google.com/file/d/0B_3SvSLy59OXUTUweFJpWjYwd1E/edit?usp=sharing
then flash it.
Exact problem. Give This zip a try. Also can you explain what is This file do???
---------- Post added at 04:57 PM ---------- Previous post was at 04:24 PM ----------
stoan123 said:
[/COLOR]
you have to download this file: https://drive.google.com/file/d/0B_3SvSLy59OXUTUweFJpWjYwd1E/edit?usp=sharing
then flash it.
Click to expand...
Click to collapse
Working. thanks bro
Sent from my z1 on slimkat rc2
a
jobangill99 said:
Exact problem. Give This zip a try. Also can you explain what is This file do???
---------- Post added at 04:57 PM ---------- Previous post was at 04:24 PM ----------
Working. thanks bro
Sent from my z1 on slimkat rc2
Click to expand...
Click to collapse
there're diferent between c6903 and c6902. i think that is modem
you can read more detail from thread
thanks a ton guys finally it worked by flashing modem and was able to use the rom:good:

[Q] Newly Rooted Note 4 T Mobile help

Hello fellas...just rooted my note 4 using odin. After rooting I tried to install the TWPR flash recovery to no evail. For some reason after downloading the recovery file, when I open it up in odin it get's stuck on the screen ( using my computer). So I cannot install it to my phone....yet. I did download ROM toolbox pro...i do notice there is a recovery option here. Is this the same thing as the TWPR recovery? Do I absolutely need TWPR recovery? really new to this so all and any info will help thanks!
Use an older version of Odin. I'm using 3.04 everyday. Yes you need a custom recovery.
http://forum.xda-developers.com/showthread.php?t=1703998
freshverse said:
Hello fellas...just rooted my note 4 using odin. After rooting I tried to install the TWPR flash recovery to no evail. For some reason after downloading the recovery file, when I open it up in odin it get's stuck on the screen ( using my computer). So I cannot install it to my phone....yet. I did download ROM toolbox pro...i do notice there is a recovery option here. Is this the same thing as the TWPR recovery? Do I absolutely need TWPR recovery? really new to this so all and any info will help thanks!
Click to expand...
Click to collapse
Did you install Chainfire Root before trying to install TWRP. I have a short Odin video on YouTube I made for another member that you can check out. See if it helps you
http://youtu.be/hMOsw0RDeSQ
Remember that this was for a specific member and rom he was installing as far as the Firekat files. The Odin, chain root, and twrp will work for your needs. You might want to update the twrp to 2.8.4.
2.8.1 works fine for me so that what I have installed
lances1027 said:
Did you install Chainfire Root before trying to install TWRP. I have a short Odin video on YouTube I made for another member that you
Remember that this was for a specific member and rom he was installing as far as the Firekat files. The Odin, chain root, and twrp will work for your needs. You might want to update the twrp to 2.8.4.
2.8.1 works fine for me so that what I have installed
Click to expand...
Click to collapse
Yes used odin for chainfire root...i downloaded the recovery file but when i load in odin via pda it says program not responding and I end up having to shut down Odin.
freshverse said:
Yes used odin for chainfire root...i downloaded the recovery file but when i load in odin via pda it says program not responding and I end up having to shut down Odin.
Click to expand...
Click to collapse
make sure your file is a tar file and not an image, if it is good then I would try a different version of Odin as mentioned before. If still no luck I would definitely try a different file location to get the Download or a different version of TWRP. I have files that I know work if you need.
Hope we helped
Also when your loading in the pda slot it takes a minute to populate in the slot sometimes 60 seconds....
That is normal. Sometimes when loading firmware it takes up to 3 minutes or so for the md5 check to be done. Usually root and recovery aren't quite as long but still can take a min.
freshverse said:
Do I absolutely need TWPR recovery?
Click to expand...
Click to collapse
To answer this question, are you planning on flashing ROMs? If not, I wouldn't worry about TWRP. Some people just like to ROOT and be on their way.
lances1027 said:
That is normal. Sometimes when loading firmware it takes up to 3 minutes or so for the md5 check to be done. Usually root and recovery aren't quite as long but still can take a min.
Click to expand...
Click to collapse
Yeah I realized that when I loaded the chainfire file in odin. But after waiting 10 minutes for the recovery file , I figured something was wrong. If you can provide me with the recovery link that would be great. Its for the note 4 t mobile.
What version where you using?
---------- Post added at 07:06 AM ---------- Previous post was at 06:57 AM ----------
Here is 2.8.4
http://www.techerrata.com/file/twrp2/trltetmo/openrecovery-twrp-2.8.4.0-trltetmo.img.tar
And 2.8.1
http://www.techerrata.com/file/twrp2/trltetmo/openrecovery-twrp-2.8.1.1-trltetmo.img.tar
lances1027 said:
What version where you using?
---------- Post added at 07:06 AM ---------- Previous post was at 06:57 AM ----------
Here is 2.8.4
http://www.techerrata.com/file/twrp2/trltetmo/openrecovery-twrp-2.8.4.0-trltetmo.img.tar
And 2.8.1
http://www.techerrata.com/file/twrp2/trltetmo/openrecovery-twrp-2.8.1.1-trltetmo.img.tar
Click to expand...
Click to collapse
okay here is the thing when I try to save this file to my computer it saves it as openrecovery-twrp-2.8.4.0-trltetmo.img ...not openrecovery-twrp-2.8.4.0-trltetmo.img.tar what gives?
That is the problem. Try adding the .tar to the end
lances1027 said:
That is the problem. Try adding the .tar to the end
Click to expand...
Click to collapse
Ok now do I open up this file using winrar before i select it in odin pda ...or select it in odin pda as is?
As is
---------- Post added at 09:27 AM ---------- Previous post was at 08:59 AM ----------
Make sure that after it reboots you turn off your device. Hold volume up, power and the home button at the same time and go into recovery mode and back your device up. Leave what is x'ed off as is but I also back up the modem. Change the location of the back up to be saved to your SD card. Factory wipe, the advanced, checking off dalvik, system, data and cache. DO NOT WIPE INTERNAL or SD card. Reboot your phone. Let it sit for 5 min on the welcome screen then enjoy
---------- Post added at 09:28 AM ---------- Previous post was at 09:27 AM ----------
If you need some good apks and a great couple roms go check out Megas Fire Kat V8. Awesome rom.
If I've helped don't forget to hit the thanks button
lances1027 said:
As is
---------- Post added at 09:27 AM ---------- Previous post was at 08:59 AM ----------
Make sure that after it reboots you turn off your device. Hold volume up, power and the home button at the same time and go into recovery mode and back your device up. Leave what is x'ed off as is but I also back up the modem. Change the location of the back up to be saved to your SD card. Factory wipe, the advanced, checking off dalvik, system, data and cache. DO NOT WIPE INTERNAL or SD card. Reboot your phone. Let it sit for 5 min on the welcome screen then enjoy
---------- Post added at 09:28 AM ---------- Previous post was at 09:27 AM ----------
If you need some good apks and a great couple roms go check out Megas Fire Kat V8. Awesome rom.
If I've helped don't forget to hit the thanks button
Click to expand...
Click to collapse
Okay so I figured out what was wrong..for some reason my winrar program was messing up the .tar file, so I deleted winrar and was able to do the recovery without a problem! Thank you for your help fellas I hit that thanks button as much as I could..lol. Okay so now I think I want to try out a rom but....I don't see any youtube videos of people showing off firekat rom for the note 4...is firekat compatible with the note 4?
Firekat is definitely compatible with the note 4. Here's the thread:
http://forum.xda-developers.com/showthread.php?t=2916463
Screen shot 2
Android_Monsters said:
Screen shot 2
Click to expand...
Click to collapse
okay im about to install firekat....so im in recovery mode now I need to do factory reset correct before I install firekat? Which do I check in advanced ...dalvik cache...system..date...cache..??
I don't always clean install firekat, but mega does recommend it. Cache, Dalvik cache, and data.

Galaxy Note 5 SM-N920T Stock ROM wiped with TWRP Custom ROM not working. Need Help?

Hello People of XDA..
I am unable to flash any rom to my note 5..
Device: Samsung Galaxy Note 5 SM-N920T (T-Mobile)
Status:
TWRP Flashed and Working
Download Mode Working.
Detected by Odin3_v3.10.7
It was rooted before i wiped everything.
( I had some problem in the display and after reading online I thought of flashing a custom ROM hoping that might solve problem. I suddenly got a green line in my display.. someone suggested it could be a software issue.. and some googling showed it occured in some samsung devices... so i thought of wiping off everything and trying a custom rom...)
I Wiped:
Dalvik/ART Cache
System
Data
Internal Storage
Cache
Then it restarted and stuck on the Samsung Logo..
Then Tried to Install This ROM: Hyperdrive RLS5
Step by Step as advised in the forum.
but it stucks at the Black Screen after Samsung Logo..
Then I Tried This T-Mobile Galaxy Note 5 SM-N920T to Stock 5.1.1 Lollipop Firmware using Odin3_v3.10.7 but it Fails
Odin3 Screenshot http://i.imgur.com/7efYkPl.png
Please Tell me any Rom which can work ....I just need to fix this phone with any Rom..
Is there any kernal missing or something? i am unable to understand about kernals...
I bought this phone for aboutt 475 USD with hard earned money, used only a week i really feel depressed please if anyone could help me solve this problem... Thanks in Advance..
Download stock firmware from Sammobile flash it via Odin
---------- Post added at 03:09 AM ---------- Previous post was at 03:02 AM ----------
Try flashing marshmallow firmware and see if pass and never wipe internal storage
---------- Post added at 03:14 AM ---------- Previous post was at 03:09 AM ----------
https://www.androidfilehost.com/?fid=24651442761498722
Try this rom
---------- Post added at 03:18 AM ---------- Previous post was at 03:14 AM ----------
Flash rom go through aroma settings then click finish but don't reboot flash this kernel http://arter97.com/browse/exynos7420/kernel/21.1/n920tw8/arter97-kernel-n920tw8-21.1.zip and boot
Zenngn said:
Download stock firmware from Sammobile flash it via Odin
Try flashing marshmallow firmware and see if pass and never wipe internal storage
Try this rom
Flash rom go through aroma settings then click finish but don't reboot flash this kernel
Click to expand...
Click to collapse
Okay Bro I Try All of this and let you know
[/COLOR]Flash rom go through aroma settings then click finish but don't reboot flash this kernel arter97 . com/browse/ exynos7420/ kernel/ 21.1/ n920tw8/ arter97-kernel- n920tw8- 21.1. zip .......... and boot
Click to expand...
Click to collapse
Can anyone help me with this part of the solution dont reboot and flash kernal...
after flashing SICK AS HELL ROM Am I suppose "not" to reboot from TWRP and go back and copy arter97 kernal in my phone and flash it and then reboot?
_______________________________________
One more then ... when i flashed the Hyperdrive Rom... I remember reading .. "there was no kernal found or something" in the end of installation.... is that is what is causing problem?
empowercb said:
Can anyone help me with this part of the solution dont reboot and flash kernal...
after flashing SICK AS HELL ROM Am I suppose "not" to reboot from TWRP and go back and copy arter97 kernal in my phone and flash it and then reboot?
_______________________________________
One more then ... when i flashed the Hyperdrive Rom... I remember reading .. "there was no kernal found or something" in the end of installation.... is that is what is causing problem?
Click to expand...
Click to collapse
Yup, there was no kernel installed with your rom and you erupted the old one...flash stock modified, arter 21, or latest available skyhigh kernel and you'll boot...OR find a custom rom pkg that includes a kernel...
Sent from my SM-N920T using Tapatalk

Categories

Resources