[Q] Unroot help needed :) - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi.
I have rooted my phone and it has Ultimate JB rom on it ( 4.1.2 ).But the usb port on the bottom of the phone is now broken and i need to take my note to the warranty ( with an original samsung software ) but i dont know any way to unroot without using pc.
I have heard about an app called Mobile Odin and that you can unroot with it but i wanted to ask you guys as you are pros
And if you can unroot with Mobile Odin can you make a short step by step tutorial.
Thanks !

Download a stock rom.
Put it on sd card if you cannot transfer to phone
Open mobile odin. Choose the "open file" option and select the rom you downloaded. It will fill up all partitions. Then flash.
If you choose to install IcS make sure not to wipe after installation.

just flash back ics n untick all from everoot .
u can find video at YouTube too.

nokiamodeln91 said:
Download a stock rom.
Put it on sd card if you cannot transfer to phone
Open mobile odin. Choose the "open file" option and select the rom you downloaded. It will fill up all partitions. Then flash.
If you choose to install IcS make sure not to wipe after installation.
Click to expand...
Click to collapse
But can i install GB then full wipe and update to ics ota ?

Yes.
---------- Post added at 12:19 AM ---------- Previous post was at 12:16 AM ----------
But if ota don't work the you will be stuck with GB non rooted.

nokiamodeln91 said:
Yes.
---------- Post added at 12:19 AM ---------- Previous post was at 12:16 AM ----------
But if ota don't work the you will be stuck with GB non rooted.
Click to expand...
Click to collapse
Ok but if i do a full wipe before unrooting and the only app that i install will be mobile odin will it be fine then ?
(Is it even needed to do a full wipe)

As coming from JB, after installing ics you may need a full wipe.
Latest version of mobile odin has an option of wipe data during installation. So you could try that.

I think you can flash the LC1-OXA with MobileOdin. This rom make a full wipe after installing. Then you can go to the warrantly. No need to put Ics.
Envoyé depuis mon N7000

Related

[Q] Complete wipe/format and reset to stock ROM in preparation of sale

Hi all,
I currently have CleaNote and Notecore 14.1.
But, I just upgraded to the Note 2, so I want to wipe everything on my Note 1 and reinstall the stock ROM to sell it.
Is the best way to do this the following:
1. Go into CWM and format cache, system, and data
2. Select reboot, then take out the battery when it fails to boot. (I don't think you can power off from within CWM...)
3. Put battery back in and reboot into download mode.
4. Flash stock ROM via PC Odin.
From what I understand, I can't do a wipe once I've flashed the stock ROM in case I get the emmc brick bug.
Thanks,
Rich
Personally I would flash a stock GB ROM with mobile Odin setting it to wipe... call it a day
Sent from my GT-N7000 using Tapatalk 2
---------- Post added at 04:28 AM ---------- Previous post was at 04:24 AM ----------
BTW don't forget to manually delete your photos etc first
Sent from my GT-N7000 using Tapatalk 2
Second that, when it comes to internal storage wiping, connect to pc in mass storage mode and manually delete all files within, don't rely on stock format sd card, it quite often leaves files in there.
Sent from my GT-N7000 using xda premium
I did :
1. Format usb storage.
2. Go CWM safe kernel nd wipe evrything.
3. Flash a stock Rom.
4. Connect to pc, and check all my files whether deleted or not.
Finish!
Just a good advice on a good deeds.
If u sell to user, help him/her to flash safe kernel. Take philz, easier to flash.
If u sell to Samsung, no need to flash safe kernel. They will redo ur phone again anyway.
Sent from N8000, from the corner of this rounded earth.

[Q] Flashing CM9,1

Well,
I have a Galaxy Note on hands trying to install CM9.1. It was with Official rom ICS 4.0.3. I flashed it without doing the 3 wipes, and after I flashed the rom i tried to wipe data/factory reset. Then the phone would turn off everytime. So, I tought it must be because I didn't flash, then I'm trying to go back to GB, like the tutorial we have in XDA, but I'm stuck at NAND Write Start! Cache.img, and it doesn't proceed, no error messages.
What should I do?
help!
was the 4.0.3 rooted? did you have CWM with kernel or did you use CWM.zip?
nokiamodeln91 said:
was the 4.0.3 rooted? did you have CWM with kernel or did you use CWM.zip?
Click to expand...
Click to collapse
I rooted it first, and after root i used CWM.zip file.
why?
CWM.zip file is known to cause bricks. What kernel where you on? do you remember installing a custom kernel?
---------- Post added at 01:27 AM ---------- Previous post was at 01:26 AM ----------
also it would be good it you can post the screen shot of odin .. how you selected the rom files and where.
nokiamodeln91 said:
CWM.zip file is known to cause bricks. What kernel where you on? do you remember installing a custom kernel?
---------- Post added at 01:27 AM ---------- Previous post was at 01:26 AM ----------
also it would be good it you can post the screen shot of odin .. how you selected the rom files and where.
Click to expand...
Click to collapse
I installed HydraCore 7.0 STD
msedek could be right.. if you can walk us through the procedure on how you tried to install the CM rom.. we could confirm a brick,,
nokiamodeln91 said:
msedek could be right.. if you can walk us through the procedure on how you tried to install the CM rom.. we could confirm a brick,,
Click to expand...
Click to collapse
Well
I was with Official Firmware 4.0.3. Then:
1. Installed Super SU
2. Installed CWM.zip
3. Installed CM9.1
4. Wipe data/factory Reset
5. Auto reboot the device, and styck on boot screen
6. Back to Recovery
6.1 Installed Hydracore 7.0 STD
7. Wipe cache and Wipe Dalwik
8. Tried to wipe Data/factory Reset
9. Auto-reboot and yet locked on boot screen
10 Download Mode
11. trying to install GB official rom and locked in Cache writing.
I need help because it is my boss's phone. I have a galaxy note and because of this procedure that worked fine on mine I did that.
Any help to solve this hard brick?
Anyone? I need help
Really desperate here.
Installing a rom using temp cwm.zip could have done the trick to brick your phone. Anyhow. Could you paste the odin logs.
nokiamodeln91 said:
Installing a rom using temp cwm.zip could have done the trick to brick your phone. Anyhow. Could you paste the odin logs.
Click to expand...
Click to collapse
oh,
I'm not anymore in the PC where I tried Odin. But the logs were pretty usual, stopping at NAND Write Start
like this image
http://forum.xda-developers.com/attachment.php?attachmentid=1224997&stc=1&d=1343392025
And I also tried to install ICS room 4.0.3. That went on till factoryfs.img, then stoped.
Super Brick? Really? How's that possible?
provettirodolfo said:
oh,
I'm not anymore in the PC where I tried Odin. But the logs were pretty usual, stopping at NAND Write Start
like this image
http://forum.xda-developers.com/attachment.php?attachmentid=1224997&stc=1&d=1343392025
And I also tried to install ICS room 4.0.3. That went on till factoryfs.img, then stoped.
Super Brick? Really? How's that possible?
Click to expand...
Click to collapse
The stopping at "factoryfs.img" in combination with using the temporary recovery in cwm.zip is typical for a bricked device.
Please read hg42's thread for checking the bad sectors and for a workaround by repartitioning (this will exclude the bad parts from using it). But first check the eMMC with his method for errors and real confirmation of the brick.
A complete repair is only possible with a replacement of the motherboard by Samsung.

[Q] Help to flash stunner 2 from ultimate jb

please how to flash stunner 2 in my n7000 , i'm in ultimate rom v5.1
Ultimate already has a safe kernel. Boot into recovery and go to philz settings and choose clean before new rom install. Once done then install zip and choose the rom.
nokiamodeln91 said:
Ultimate already has a safe kernel. Boot into recovery and go to philz settings and choose clean before new rom install. Once done then install zip and choose the rom.
Click to expand...
Click to collapse
but they say that the phone must to be in cm10 and i tried to install cm10 attached in the rom thread and operation failed "install aborted"
You need to update philz kernel to 3.99 or above. Then it will work.. It's safe to install the rom when you have philz kernel.
nokiamodeln91 said:
You need to update philz kernel to 3.99 or above. Then it will work.. It's safe to install the rom when you have philz kernel.
Click to expand...
Click to collapse
i did as u say they tell operation aborted and tell me that message status 7
Download hydracore, go into recovery flash that (do not reboot) and go to advanced and reboot recovery... once you're in the new recovery do all the necessary wipes and install
https://sourceforge.net/projects/maxfuacm/files/Galaxy Note/MaxFu_HydraCore/n5.JBT/
Eng_sabba7 said:
i did as u say they tell operation aborted and tell me that message status 7
Click to expand...
Click to collapse
Also check the md5 of the downloaded rom. May be that is corrupt
nokiamodeln91 said:
Also check the md5 of the downloaded rom. May be that is corrupt
Click to expand...
Click to collapse
i tried to use another copy of ultimate rom .zip file and putting it in the memory card it work until finish setup rom :victory: put then device restart to recovery screen again i tried to select "reboot system now " put device restart again to recovery !!!!!!!!!!!!!!! wat to do friend
Boot into recovery recovery and do a factory reset. And then reboot.
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
So this time the flash finished well?
nokiamodeln91 said:
Boot into recovery recovery and do a factory reset. And then reboot.
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
So this time the flash finished well?
Click to expand...
Click to collapse
i had select wipe data / factory reset >>> that operation finished then i restart device :crying: put it's show samsung screen then closed or restart then samsung screen then recovery screen again
Eng_sabba7 said:
i had select wipe data / factory reset >>> that operation finished then i restart device :crying: put it's show samsung screen then closed or restart then samsung screen then recovery screen again
Click to expand...
Click to collapse
U are an Indian the best in programming in all the world u must to have a solution
Ok go to recovery again and then to philz settings and choose clean before new rom install. Once that's done. Install the rom again and check.
nokiamodeln91 said:
Ok go to recovery again and then to philz settings and choose clean before new rom install. Once that's done. Install the rom again and check.
Click to expand...
Click to collapse
i did that before >>>> but will try again MANY THANKS FOR UR EFFORTS
Ok let's see what happens.
the same problem i despair <<<<<
Better now put the phone in download mode and flash a stock rom. If you choose ics then do not wipe on stock recovery.
flash by odin ???
???
---------- Post added at 07:54 PM ---------- Previous post was at 07:16 PM ----------
Download a stock rom. Follow this thread
http://forum.xda-developers.com/showthread.php?t=1424997
i mean flash rom using odin program ?
Yes. This way you will get back to factory settings.

[ROM][ROOT][i9506] How to FLASH N' ROOT Lollipop Samsung TW

This guide help you to
install the Samsung Lollipop TouchWiz and get the root permissions
on Galaxy S4 GT-I9506​
Do it on your own responsibility! and keep in mind that you will lose your warranty!​
Before you proceed, make sure:
1) You have installed your Samsung Galaxy S4 GT-I9506 USB drivers on your PC (the easiest way is to install Kies)
2) Your S4 should have 70-80% charge remaining.
3) Backup all your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt
4) Make sure that Kies software is not running and disable your antivirus
Download the requirements:
Click on each one for download
-Odin software
-Recovery TWRP "flashable"
-SuperSu "flashable"
-Samsung Lollipop Firmware from SAMMOBILE (only if you have KitKat installed)
WARNING! I FOUND PROBLEMS WITH SOME SAMMOBILE FIRMWARE'S READ BELOW
The Czech Republic - ETL firmware (I9506XXUDOA6_I9506OXXDOA1), has WiFi broken
The Czech Republic (Vodafone) - VDC firmware (I9506XXUDOA6_I9506VFGDOA4), has wrong "Hidden" partition size
If you meet this problems you can download this official firmware from samsung updates site:
Greece - EUR firmware (I9506XXUDOAA_I9506EURDOB1)
BUILD DATE: 30.01.2015
How to install the firmware and root
If you already have the Lollipop firmware installed: Skip to the Step 8
NOTE: I racommend you to do the wipe of cache, dalvik cache, system, data partitions before proceeding,
this to prevent any problems with the apps (through recovery)
Step 1
Unzip the downloaded firmware, you will get a tar.md5 file.
Step 2
Turn OFF you mobile and go to Download Mode by pressing and holding the Power + Volume Down + Home Buttons.
together for few seconds followed by Power button then proceed with volume up.
Step 3
Now open ODIN on your PC and connect your Galaxy S4 to your computer.
Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue (or yellow) and will show the COM port number.
Step 4
Click on PDA (or AP) in Odin and choose the file ".tar.md5"
Step 5
Check "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
Step 6
Click on Start button in ODIN window to start the flashing process. The process will take few minutes to complete.
Step 7
When the installation is completed, you read a "Reset " then a "Pass". your phone will restart (first boot will take a longer time so don't panic)
> Step 8
now you have to do again all steps from Step 2, for flash the TWRP recovery needed for apply the ROOT,
the only difference is when you arrive on Step 4 you must have to choose the TWRP Recovery ".tar.md5" downloaded file
Step 9
Turn OFF you mobile and go to Recovery Mode by pressing and holding the Power + Volume Up + Home Buttons.
Step 10
Connect the mobile with USB and copy the "UPDATE-SuperSU-v2.45.zip" in the SD
Step 11
Click on the "INSTALL" button, select "UPDATE-SuperSU-v2.45.zip", and swipe to flash. After this reboot
Finish! Enjoy!
----------------------------------------------------------------------------------------------------------------------------​
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat the procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Make sure the antivirus is disabled
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install the USB driver.
- Try another computer.
Titanium Backup does not recognize the root:
- Install Titanium Backup version 7.0+
Titanium Backup does not recognize external SD:
- Install SDFix app for applying the missing external SD card permissions
Thanks to samersh72 for the inspiration to create the guide​
Thx for this guide! What about Knox value after manual flash?
Envoyé de mon LG-V500 en utilisant Tapatalk
byanou69 said:
Thx for this guide! What about Knox value after manual flash?
Envoyé de mon LG-V500 en utilisant Tapatalk
Click to expand...
Click to collapse
After flash the warranty Knox is rightly marked,
that's becouse i wrote that you lose the warranty,
but this happens anyway if you perform unauthorized flash...
General Information:
CastagnaIT and my GT-I9506 devices are originally from ETL CSC... so Czech Republic firmware.
We found that the original ETL firmware has broken WiFi, and we discover that flashing the cache partition of Vodafone firmware has solved the issue... this is the reason we provide here an already fixed firmware.
Probably with newer updates it will be automatically solved, but for now this fix is working perfectly.
I dirty flashed the modified firmware file directly over my TW 4.4.2 installation, and I saw the phone has correctly get the update without any loosing of apps or datas... so my installation is exactly equivalent to a normal Sammy update.
Thanks for the attention.
German Vodafone have also broken WiFi...
The German rom seemed to work for me, no issues.
The German rom seemed to work for me, no issues.
Flash procedure check...
Developer.WL said:
German Vodafone have also broken WiFi...
Click to expand...
Click to collapse
Drady said:
The German rom seemed to work for me, no issues.
Click to expand...
Click to collapse
Hi,
I have a doubt... let me explain.
When you flashed with Odin, the correct procedure I think is this one.
1) After flash complete the phone must restart automatically
2) at the first boot, the recovery must be automatically activated and a flash of a cached element must appear
3) after this recovery flash, the phone reboot automatically and finally start with rom initialization
I think that for @Drady this has happened, and I think also that for @Developer.WL this has not happened.
This recovery flash is the culprit (probably) that give as result the wifi working.
I saw this, because I prepared a modded firmware with removed the recovery.img, so my Odin flash has not installed the stock recovery, leaving twrp as recovery.
After my flash, the phone was just shutdown (no reboot). Remembering that recovery flash was also done for previous KK firmware, I switched on the phone by pressing the buttons Vol-up + Power + Home, and my phone has booted into twrp and has flashed the missing cache part, than the phone auto-rebooted correctly and the system is working as it must.
My suggestion to @Developer.WL, is to reflash the firmware, taking care that at the first boot the phone must go to recovery (flash is about a couple of seconds) and after this must reboot into the rom...
Please let us know if this solve the wifi issue.
Thanks for cooperation.
AFAIK you should turn off device before enter download mode and then flash Czech version, this will let you to replace old modem with new one.
kornelius1982 said:
AFAIK you should turn off device before enter download mode and then flash Czech version, this will let you to replace old modem with new one.
Click to expand...
Click to collapse
Yes, the download mode must be enabled from phone off status with buttons procedure (Vol-Down + Power + Home).
The fixed firmware is finally ready for download!
5.0
I am curious to try the official 5.0 even though i am waiting for the Nordic Countries(NEE) Release , ill just see if the WI-FI on German version works till than ..
Arter97 aosp kernel
Is it possible to flash this kernel (link below) on this latest Official lollipop samsung release for i9506 ?
http://forum.xda-developers.com/showthread.php?t=2691648
---------- Post added at 05:41 PM ---------- Previous post was at 05:00 PM ----------
I have the answer : i9506 not supported for the moment by these kernels
Your fixed ROM's link is dead. MediaFire says "Dangerous File Blocked". Please upload it to another cloud.
boggy27 said:
I am curious to try the official 5.0 even though i am waiting for the Nordic Countries(NEE) Release , ill just see if the WI-FI on German version works till than ..
Click to expand...
Click to collapse
For your information, official 5.0.1 NEE has been released...
---------- Post added at 09:24 PM ---------- Previous post was at 09:10 PM ----------
yazsers said:
Is it possible to flash this kernel (link below) on this latest Official lollipop samsung release for i9506 ?
http://forum.xda-developers.com/showthread.php?t=2691648
---------- Post added at 05:41 PM ---------- Previous post was at 05:00 PM ----------
I have the answer : i9506 not supported for the moment by these kernels
Click to expand...
Click to collapse
Absolutely NOT!!! Arter kernel is AOSP based, Official Lollipop is TW...
---------- Post added at 09:32 PM ---------- Previous post was at 09:24 PM ----------
ShaneDiNozzo said:
Your fixed ROM's link is dead. MediaFire says "Dangerous File Blocked". Please upload it to another cloud.
Click to expand...
Click to collapse
Thanks for the head-up... already requested to Mediafire to remove the block on download... file is safe, not dangerous...
how to debloat after root? using root explorer how can i do?
smeroni68 said:
For your information, official 5.0.1 NEE has been released...
---------- Post added at 09:24 PM ---------- Previous post was at 09:10 PM ----------
Thank you! It has been released just today , that is great ! And thx for this helpfull post!
Click to expand...
Click to collapse
sibellius said:
how to debloat after root? using root explorer how can i do?
Click to expand...
Click to collapse
At this moment there is no way I tried root uninstall, TB and uninstall without any result.
I think we have to wait for updates
i don't fix glonass on this NEE version....
I have LineageOS 13, TWRP and I want to ROOT my i9506. As I understand, I can't ROOT it on LineageOS 13 - I have to install official ROM, ROOT it, and then install LineageOS again, yes?

z3 compact possibly bricked, newbie with tons of questions.

Not sure if someone has the patience for a newbie here but it's my last hope. got this phone from a reliable source he bought it new tried to unlock the bootloader and screwed up in the middle of the process. I have no idea how fix it as far as what software I ned and how ot use it and which to steps to take. I tried all options in the power plus volume recovery mode, non work, here is what I get:
http://i57.tinypic.com/2d0ngqs.jpg
http://i57.tinypic.com/2v1klqw.jpg
http://i61.tinypic.com/x0s67q.jpg
http://i60.tinypic.com/xoe5oo.jpg
http://i60.tinypic.com/5vn0i0.jpg
http://i57.tinypic.com/mkhfrq.jpg
http://i57.tinypic.com/208enbo.jpg
http://i57.tinypic.com/28ckhh4.jpg
http://i60.tinypic.com/x1alqq.jpg
http://i57.tinypic.com/2dc8n12.jpg
http://i59.tinypic.com/15cd9gg.jpg
http://i57.tinypic.com/mmqu0z.jpg
http://i61.tinypic.com/2vn45mq.jpg
http://i62.tinypic.com/2h2mkhi.jpg
http://i57.tinypic.com/25aj6n9.jpg
http://i60.tinypic.com/2en8g9z.jpg
Any ideas?
Cheers
It looks like you have a custom recovery and need to flash a ROM. Try downloading a ROM from XDA and flashing it. You need to put the ROM on an SD card and flash it using the menu options.
scitech09 said:
It looks like you have a custom recovery and need to flash a ROM. Try downloading a ROM from XDA and flashing it. You need to put the ROM on an SD card and flash it using the menu options.
Click to expand...
Click to collapse
don't have a sd card, can I do this with my mac somehow and usb connected to the phone?
also where do I download the rom and how do I flash it with what software?
Look in the XDA Developers forum under "Xperia Z3 Compact Android Development". You will find various ROMs in the discussions as well as links for downloading them. The ROMs well be large ZIP files. Transfer them to the phone using a tool called ADB. You can install this on a Mac and transfer the ZIP via a USB cable.
---------- Post added at 11:25 PM ---------- Previous post was at 11:24 PM ----------
Google's ADB and Mac for installation instructions.
---------- Post added at 11:28 PM ---------- Previous post was at 11:25 PM ----------
Once the ZIP file is on the phone, boot into recovery mode and select "Install ZIP". Then select the ZIP file that you transferred.
So u have cwm, thats good for now.
Download a Rom u want to flash. For example a Stock kitkat Rom.then use the cwm sideload Option to copy it to ur internal storage. When this is done wipe System,Cache &dalvik Cache. Do NOT wipe the internal storage.then flash the zip u Put in via sideload and reboot. If u done all correct System should Boot.
I think I wiped it I know I tried to clean everything and pressed every option, not sure, where is the link for the stock kitkat rom, there are so many pages and links I can't find it.
basti2909 said:
So u have cwm, thats good for now.
Download a Rom u want to flash. For example a Stock kitkat Rom.then use the cwm sideload Option to copy it to ur internal storage. When this is done wipe System,Cache &dalvik Cache. Do NOT wipe the internal storage.then flash the zip u Put in via sideload and reboot. If u done all correct System should Boot.
Click to expand...
Click to collapse
ua101 said:
I think I wiped it I know I tried to clean everything and pressed every option, not sure, where is the link for the stock kitkat rom, there are so many pages and links I can't find it.
Click to expand...
Click to collapse
You have a custom recovery...you cannot therefore flash a stock rom.
Download a custom rom. Place it on your sd card, and flash it from recovery.

Categories

Resources