I want to flash rc 3.1 on my sgs which is currently on darkyrom 10.2. after reading multiple threads n posts i found this tutorial by Totallydubbed : youtube.com/watch?v=NBBeennHTEA
it is recommended to install cm 7.1 first as ics have some issues with darkcore kernel, plz can anyone guide me how can i install rc 3.1 instead as in this tutorial there is fugumod which i cannot find for rc 3.1
plz tell me the necessary steps to install firstly cm7.1 over darkyrom n then ics rc 3.1 over cm7.1.
Thanks
Man here is the link:http://androidadvices.com/samsung-galaxy-gt-i9000-steps-install-ics-android-403-build-15-firmware/
moix088 said:
I want to flash rc 3.1 on my sgs which is currently on darkyrom 10.2. after reading multiple threads n posts i found this tutorial by Totallydubbed : youtube.com/watch?v=NBBeennHTEA
it is recommended to install cm 7.1 first as ics have some issues with darkcore kernel, plz can anyone guide me how can i install rc 3.1 instead as in this tutorial there is fugumod which i cannot find for rc 3.1
plz tell me the necessary steps to install firstly cm7.1 over darkyrom n then ics rc 3.1 over cm7.1.
Thanks
Click to expand...
Click to collapse
Follow this video guide for flashing RC3.1
Thanks.. i have seen the tutorials i have few more questions, is it safe flashing from JVQ 2.3.4, to cm 7.1 and then to rc3.1, are there any chances of having a bricked phone n also, if i make a backup from recovery can i restore my darkyrom as it was before flashing? Thanks
Sent from my GT-I9000 using Tapatalk
There's always a chance you'll end up with a bricked phone, but if you do it like on the tut, that chance is very small
moix088 said:
Thanks.. i have seen the tutorials i have few more questions, is it safe flashing from JVQ 2.3.4, to cm 7.1 and then to rc3.1, are there any chances of having a bricked phone n also, if i make a backup from recovery can i restore my darkyrom as it was before flashing? Thanks
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Go directly from ur JVQ to ICSSGS 3.1,do a full wipe,then flash. No worries
Thanks, i have read darkcore kernal have some issues with ics
Sent from my GT-I9000 using Tapatalk
moix088 said:
Thanks, i have read darkcore kernal have some issues with ics
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I haven't heard about those issues but if you've read it then don't take a chance. First flash CM7(i was running nightly 181 for a month and it's very stable). Then flash ICSSGS3.1
Hi every body ..
I have Note with ICS 4.0.3 Android system , and it's so slow !!
can you help me and advise me with a best Rom and Kernel for this version .
you better start reading the threads. what may be fast for me will be slow for you.
im on stock LPA with Gl-note kernel extreme on LPT modem.
try cleanote ics from development section.
good luck.
Sent from my GT-P1010 using xda app-developers app
midoo90 said:
Hi every body ..
I have Note with ICS 4.0.3 Android system , and it's so slow !!
can you help me and advise me with a best Rom and Kernel for this version .
Click to expand...
Click to collapse
This is the best kernel in town that is GN. http://forum.xda-developers.com/showthread.php?t=1749863
About the rom, it really depends on your taste. Cleanote is stock look custom rom. Me, my rom is modded lite alba by elishadow.
Hi. I would like to try a couple of modems cause my signal quality is not the best now in comparison with what I had previously.
The questions is: I'm on RocketMIUI v6 and I do not understand what category this ROM can be included in. Is it sammy based or not ?
If I got it right, I can flash any modem for GB and ICS under ANY rom (sammy or cm based) right ?
But what about RocketMIUI ? Is it something special ? Can I flash any modem under this rom ?
Thanks !
xserene said:
Hi. I would like to try a couple of modems cause my signal quality is not the best now in comparison with what I had previously.
The questions is: I'm on RocketMIUI v6 and I do not understand what category this ROM can be included in. Is it sammy based or not ?
If I got it right, I can flash any modem for GB and ICS under ANY rom (sammy or cm based) right ?
But what about RocketMIUI ? Is it something special ? Can I flash any modem under this rom ?
Thanks !
Click to expand...
Click to collapse
Rocket miui is sammy based you can flash any modem.
Sent from my GT-N7000 using xda app-developers app
xserene said:
Hi. I would like to try a couple of modems cause my signal quality is not the best now in comparison with what I had previously.
The questions is: I'm on RocketMIUI v6 and I do not understand what category this ROM can be included in. Is it sammy based or not ?
If I got it right, I can flash any modem for GB and ICS under ANY rom (sammy or cm based) right ?
But what about RocketMIUI ? Is it something special ? Can I flash any modem under this rom ?
Thanks !
Click to expand...
Click to collapse
You can flash any modem. This is an excellent guide from rgreat - http://forum.xda-developers.com/showthread.php?t=1645202
I hope this helps. Please hit THANKS if it did.
Alba Donzo said:
You can flash any modem. This is an excellent guide from rgreat - http://forum.xda-developers.com/showthread.php?t=1645202
I hope this helps. Please hit THANKS if it did.
Click to expand...
Click to collapse
Thanks ! I'll check it
hi guy's....
i'm new here..
& i'm new in custom roms & kernals
my questions is..
first i want to test the new rom PARANOIDANDROID 2.99 betaNINE.9+
but wich rom is the latest one..?
" pa_n7000-2.99-25GEN2013-095411.zip "
or .. " pa_n7000-2.99-23GEN2013-160034.zip "
and my second question is..
i'm on cyanogenmod 9 (ICS 4.0.4)
if i want to install " PARANOIDANDROID 1.6a "
can i install it without change my kernal.. or without flash a gingerbread rom????
cuz i won't change my kernal..
regardz.... peace
AW: [Q] questions about ParanoidAndroid roms
take the newest one from 25th.
If you install a new Rom this will install a new kernel.
But you can install your wish kernel later - if it is a kernel working with the Rom you chose.
Sent from my GT-N7000 using xda premium
Moved thread to Q&A. Op, if your thread title has "[Q]" or "question" or the body is is a question, it belongs in Q&A
thx a looot.. but u mean that i can flash the " PARANOIDANDROID 1.6a " form cyanognemod 9 (4.0.4) without change my kernal or flash a gingerbread rom????
AW: [Q] questions about ParanoidAndroid roms
No, I didn't say that.
And you always should follow the installation instructions of the specific Rom. So please read there.
Sent from my GT-N7000 using xda premium
mr.pc91 said:
thx a looot.. but u mean that i can flash the " PARANOIDANDROID 1.6a " form cyanognemod 9 (4.0.4) without change my kernal or flash a gingerbread rom????
Click to expand...
Click to collapse
Also, please do not try the paranoid android 2.99 ROM if you are new. It is very much in beta stage and is not stable like the other custom ROMs.
Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
Click to expand...
Click to collapse
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
Edit: ops I just saw you're not Italian
Click to expand...
Click to collapse
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
ThaiDai said:
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
Click to expand...
Click to collapse
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Thanks
Bad-Pixel said:
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for the answer ! I just installed successfully the Italian version of JB !
PD: No, i'm from Buenos Aires, But i'm an Italian Citizen, i have double citizenship...
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I will keep that in mind... But i want to install CM10.1 in mi N7000, my cousin(he has a Galaxy S3 with Philz 4.88.5 and CM10.1) he recommended it to me... I really want the performance/interface given by CyanoGen Mod...
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
Click to expand...
Click to collapse
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Really? Maybe i read wrong ! But there is written that Philz 4.88.5 supports CM10.1 and GT-N7000...
Read This thread http://forum.xda-developers.com/showthread.php?t=2002953
Someone in http://www.Taringa.net recommended me to use Crash Rom with Philz kernel ! And not only one person did that !
What Do You Think? I'm very confused about Android(Kernel/Rom/Recovery)...
PD: I really miss my iPod Touch 4g ! iOS it's heaven for me hahahaha
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
But dude, that topic is about the galaxy s3 (i9300) and talking about a custom recovery (with few words, the menu from where you install new roms or wipe your note) and not about a kernel. Plus, Dev Crash left our note community some months ago, and his last rom is a jb leak rom Samsung, so I don't recommend you to install it. It's too much old now. Btw, if you wanna some advice about all this story (kernel recovery and other maybe) I advice you to:
First search for some already opened thread, and if you will not any answer to your questions, open a new thread
Sent from my GT-N7000 using xda premium
Auch ! Sorry man ! I had a confusion !
But if you read the Thread there says that it's compatible with N7000... So, i can install Philz 4.88.5 Recovery on my Note !
Reading in the web i found a tutorial of the CM10.1 Official for N7000, i think i will use this ROM in my Note ! What do you think? Any advice?
In the page of CM i found the tutorial... I can't put the link here...
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
Click to expand...
Click to collapse
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
nokiamodeln91 said:
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
Click to expand...
Click to collapse
I said Philz Recovery... With CM10.1 ROM and Kernel !
which Philz recovery are you referring to ? Temp one?
nokiamodeln91 said:
which Philz recovery are you referring to ? Temp one?
Click to expand...
Click to collapse
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
MarianoQT said:
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
Click to expand...
Click to collapse
Dont you read? Phil touch recovery + stock kernel is only for touchwiz rom a.k.a stock rom. No cm9 no cm10 or cm10.1. If im not mistaken speedmod kernel is using phil recovery but no touch features it also for stock touchwiz rom. Correct if im wrong
Sent from my GT-N7000 using xda premium
struk in boot
Bad-Pixel said:
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
altanole said:
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
Click to expand...
Click to collapse
Ok resolved
I installed philzkernal matching to my rom via Odin and now is all fine
Sent from my GT-N7000 using xda app-developers app