nAa kernel problem - XPERIA X8 Q&A, Help & Troubleshooting

With nAa kernel on any rom my wifi does¸t work.
Now i am using gingerxperiaray v04 with nAa 10 kernel and also not work.
When i try to turn on my wifi it is not scanning and after 30 seconds wifi by itself turns off and when i wont go to properties or mannual scan it gives me force close.
Any help will be good.

do full wipe and try again!

lorionl said:
do full wipe and try again!
Click to expand...
Click to collapse
I've tried few times but nothing happened

Did you restore anything using TitaniumBackup or anything else?

lorionl said:
Did you restore anything using TitaniumBackup or anything else?
Click to expand...
Click to collapse
what is difference?

Hellboy880 said:
what is difference?
Click to expand...
Click to collapse
if you restore WLAN-Settings with TB it might lead to problems

TB did that, i solved it

another problem for me
after flashing nAa kernel then try to flash MiniCM7-2.1.9-shakira
it bootloops, sometimes it stuck at nAa kernel logo.

Related

[Q] Stuck at kernel logo. Nothing is working.

Good afternoon,
I'm sorry i'm creating a new thread about an old subject, but i just can't get my X8 to work with custom kernel+rom. I've searched the forum for the same issue but none of the solutions described worked. Until this moment i had to use PCC to flash my smartphone back to normal about 10 times and it's starting to get very annoying. I've followed the devs instructions on all procedures thoroughly, rooting, bootlader unlock, flashing kernel and installing ROM, and it always gets stuck on the kernel logo wether is it before or after flashing the rom (unless i press the back button). To this moment, i've tried nAa-14 and alfs v09 kernel, GingerDX and Zaraki roms, followed guides step by step. I'm a newbie in the smartphones area but not when it comes to computers. Throughout my 'voyage' i had a number of bumps i had to overcome, like having the installation aborted (bad) error when trying to install a rom, which i solved by downloading the zip directly to the SDcard like described here in the forums. GGdrivers are installed, and so are the SE USB drivers, phone is recognized by PCC with no problems.
I honestly have no idea what might be wrong, and as i said, i've done a search before creating a new thread but nothing helped, or maybe i'm just missing a tiny detail. I would really like the help since this is my first smartphone and i would like to play with my new toy!
Thanks and sorry for any inconvenience.
EDIT: I forgot something. In the kernel installation guide is requested that after flashing it, to check in the phone settings if everything is ok. I can't even boot the phone after flashing the kernel (gets stuck on kernel logo) which means my problem is related to something previous to it? Maybe bootlock? I'm pretty sure i'm doing what's required.
Appreciate the fast answer.
I get stuck on the logo wether is it before or after flashing the rom. The only way i don't get stuck is to press the back button to boot into cwm.
Yes i've tried to wipe after and before, and it didn't work. And these were the only roms and kernels i've tried.
There's no problem with hardbricking my device by the way, 11w03.
I'll have to get out for a while, but i will come back later to check all the answers, this is a priority for me at the moment
emaz1ng said:
Appreciate the fast answer.
I get stuck on the logo wether is it before or after flashing the rom. The only way i don't get stuck is to press the back button to boot into cwm.
Yes i've tried to wipe after and before, and it didn't work. And these were the only roms and kernels i've tried.
There's no problem with hardbricking my device by the way, 11w03.
I'll have to get out for a while, but i will come back later to check all the answers, this is a priority for me at the moment
Click to expand...
Click to collapse
Don't full wipe two times,either before or after,you can see this at the rom thread.
One basic detail that many forget is that you must have baseband that lasts to 15,so it would be like this xxx015
Sent from my X8 using xda premium
I didnt full wipe when trying gingerdx, as you said its not requested, only wiped with zaraki. I can confirm my baseband is xxxx015.
Sent from my E15i using xda app-developers app
emaz1ng said:
I didnt full wipe when trying gingerdx, as you said its not requested, only wiped with zaraki. I can confirm my baseband is xxxx015.
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
You have to full wipe,don't full wipe two times,gingerdx needs full wipe before installing the rom....
Sent from my X8 using xda premium
I tried again using the correct wiping method for gingerdx and it still freezes on kernel logo. the weird thing is that it freezes the first time it boots after flashing the kernel, meaning it has nothing to do with the rom, right? and maybe even not related to the kernel itself. i'm completely clueless about this, i wish i had a friend who could do it for me, because i can't detect anything done wrong.
What version of cwm are you using?
Sent from my X8 using xda premium
i'm not quite sure what's the version of cwm since it installs itself along with nAa-14 kernel, but i think it was v5.0.2.8
IAmNice said:
I think its the cwm that comes with the kernel.
For the OP. No idea what to do. You have a weird problem
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
please don't destroy my hopes of having a working custom rom on my phone jokes aside, i get your point, but doesn't it seem not logical that i'm the only one who can't get it to work? it's weird enough i can't boot my phone after flashing the kernel....
i could post a video, sure, but it's pretty straightforward. after i flash the kernel, unplug the phone from PC and boot it up, IF i don't boot into cwm, it will freeze on the kernel logo, making it impossible to even check the phone settings as requested in gingerdx thread. AFTER i install the rom and reboot the phone, it will still show the kernel logo and freeze again (if i understand correctly this is not supposed to happen, what's supposed to show on the screen after the rom is installed are the normal SE logos.)
So, summing up. Flash kernel, turn phone on, freezes on kernel logo if i don't use back button to go into cwm. If i enter cwm, install rom from sdcard, reboot, it shows the kernel logo and freezes if i don't use back button again.
Don't know if it helps but the only way to turn the phone off when it freezes is removing the battery. Sometimes after placing the battery again it will automatically turn on.
Dunno what's wrong,why don't you try with stock kernel and gdx,or why don't you try different rom(yea neither gdx nor gzr)
Sent from my X8 using xda premium
you mean formatting partitions after flashing the kernel or before? i assume there's an option for it under cwm?
stamatis16 said:
Dunno what's wrong,why don't you try with stock kernel and gdx,or why don't you try different rom(yea neither gdx nor gzr)
Sent from my X8 using xda premium
Click to expand...
Click to collapse
sure i can try other roms, but the fact that it freezes before installing the rom seems to point towards another problem?
the phone was bought in 2nd hand by the way, maybe there's something that could have happen before it got to me?
You have to format the partitions after flashing the kernel. In CWM recovery, go to 'mounts and storage' and format all the partitions except /sdcard.
feherneoh said:
Try to format all of the partitions (yes, ALL of them), then install ROM again.
After installation turn off the phone, take out the card, then turn phone on.
I hope it will work.
Click to expand...
Click to collapse
Lajbymester said:
You have to format the partitions after flashing the kernel. In CWM recovery, go to 'mounts and storage' and format all the partitions except /sdcard.
Click to expand...
Click to collapse
Just did it and the same thing happened. Flashed nAa-14, booted into cwm, full wipe, full cache wipe, wiped all the partitions but sdcard, installed rom, rebooted and it froze on the logo. Tried again with removing the sdcard and turning the phone on, froze on logo. Flashing it back to stock using PCC atm
By the way, it didn't let me format sd/ext.
Have you tryed with older version of naa? Naa 14 is buggy, naa 11 is the best
Sent from my p970 using xda premium
emaz1ng said:
Just did it and the same thing happened. Flashed nAa-14, booted into cwm, full wipe, full cache wipe, wiped all the partitions but sdcard, installed rom, rebooted and it froze on the logo. Tried again with removing the sdcard and turning the phone on, froze on logo. Flashing it back to stock using PCC atm
By the way, it didn't let me format sd/ext.
Click to expand...
Click to collapse
Try some other roms like minicm7. Do it in this order
Flash the kernel
Boot to cwm
Format system,data,cache
Fullwipe/Factory reset
Install Rom
Reboot
....wait .....
I do this every time i install a new rom..
Make sure The rom you have downloaded belongs to x8..
ElmirBuljubasic said:
Have you tryed with older version of naa? Naa 14 is buggy, naa 11 is the best
Sent from my p970 using xda premium
Click to expand...
Click to collapse
I will do that right away. I will also download a few others roms (and respective kernels) and try them all out. Only one thing, I was going to download MiniCM10 and i saw this in its post: "MiniCM10 is an unofficial port of CyanogenMod 10 for the SEMC msm7x27 devices." What does it mean 'for the SEMC msm7x27 devices'? Is it related to bootload unlock? Because i get Setool2 Certificate instead of SEMC. Does this make my problem a little easier?
EDIT: Ok, i've just tried ICZaraki+nAa-04-ics, minicm10+nAa-jb, gingerdx/gingerzaraki+nAa 11, and guess what, none worked.... We have to start thinking this is not related with the kernel or rom maybe? Any suggestions? When i tried the nAa-11 kernel, when i booted up the phone a white led popped up instead of a green one. I'm not worried if this takes a whole month to fix, i'm up for any suggestions and ideas of any kind, just throw them at me.
emaz1ng said:
I will do that right away. I will also download a few others roms (and respective kernels) and try them all out. Only one thing, I was going to download MiniCM10 and i saw this in its post: "MiniCM10 is an unofficial port of CyanogenMod 10 for the SEMC msm7x27 devices." What does it mean 'for the SEMC msm7x27 devices'? Is it related to bootload unlock? Because i get Setool2 Certificate instead of SEMC. Does this make my problem a little easier?
EDIT: Ok, i've just tried ICZaraki+nAa-04-ics, minicm10+nAa-jb, gingerdx/gingerzaraki+nAa 11, and guess what, none worked.... We have to start thinking this is not related with the kernel or rom maybe? Any suggestions? When i tried the nAa-11 kernel, when i booted up the phone a white led popped up instead of a green one. I'm not worried if this takes a whole month to fix, i'm up for any suggestions and ideas of any kind, just throw them at me.
Click to expand...
Click to collapse
This happen with alfs too? Have you followed all istructions to unlock bootloader?
Ah please..provide logcat! Big devs like rohin,eet, etc maybe can help you with logcat
ElmirBuljubasic said:
This happen with alfs too? Have you followed all istructions to unlock bootloader?
Ah please..provide logcat! Big devs like rohin,eet, etc maybe can help you with logcat
Click to expand...
Click to collapse
Yep, happens with all the kernels i've used, nAa-11/14, nAa JB, ICS, etc....
Googled logcat, i understand its use, but how do you want me to use it?
Yes, bootload is unlocked, i have the "r". Or is there any chance that even with the "r" it's still locked? Anyway, i followed the guides with no problem.
emaz1ng said:
Yep, happens with all the kernels i've used, nAa-11/14, nAa JB, ICS, etc....
Googled logcat, i understand its use, but how do you want me to use it?
Yes, bootload is unlocked, i have the "r". Or is there any chance that even with the "r" it's still locked? Anyway, i followed the guides with no problem.
Click to expand...
Click to collapse
you can try to use my automated tool at my siggy. Just upload the logs at here and the devs will do their jobs
wcypierre said:
you can try to use my automated tool at my siggy. Just upload the logs at here and the devs will do their jobs
Click to expand...
Click to collapse
am i supposed to specify a device (device id?) or just log all and upload them here?

GingerDX v030 stuck at splash screen

I searched a lot in all threads to find a similar question or just an answer to my problem.
To start I have to tell you that I already had the v029 installed with the stock kernel and everything was fine.
Then I wanted to check some other roms and if they fit me better. So i got it from the begining. Wiped everything and installed the stock eclair with PCC. Unlocked the bootloader through a very usefull guide found here and flashed the latest nAa kernel. Then I downloaded the MiniCM9 3.0.5 Rom and installed it succesfully.
Everything is working fine but I wanted to go back to GingerDX. So I did a factory reset/wiped everything downloaded the rom for the nAa kernel and installed it. It said that it was successfuly installed. But when I try to boot my phone It stucks on the GingerDX splash screen with the animation and doing nothing. No keys working. I removed the battery to shut down, install the CM9 rom again and everything's fine.
Can you please tell what am I doing wrong? Thanks in advance.
Toumpeki said:
I searched a lot in all threads to find a similar question or just an answer to my problem.
To start I have to tell you that I already had the v029 installed with the stock kernel and everything was fine.
Then I wanted to check some other roms and if they fit me better. So i got it from the begining. Wiped everything and installed the stock eclair with PCC. Unlocked the bootloader through a very usefull guide found here and flashed the latest nAa kernel. Then I downloaded the MiniCM9 3.0.5 Rom and installed it succesfully.
Everything is working fine but I wanted to go back to GingerDX. So I did a factory reset/wiped everything downloaded the rom for the nAa kernel and installed it. It said that it was successfuly installed. But when I try to boot my phone It stucks on the GingerDX splash screen with the animation and doing nothing. No keys working. I removed the battery to shut down, install the CM9 rom again and everything's fine.
Can you please tell what am I doing wrong? Thanks in advance.
Click to expand...
Click to collapse
Wipe cache & dalvik cache while before installing
Sent from my X8 using xda app-developers app
I did and it's stuck again. I waited for 10 minutes before I closed it.
Does the kernel for CM9 supports gb?
Sent from my X8 using xda app-developers app
Wipe cache
dalvik cache
and fix permision
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Toumpeki said:
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Click to expand...
Click to collapse
There is a thanks button...
Press it
Sent from my X8 using xda app-developers app
Toumpeki said:
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Click to expand...
Click to collapse
Any luck? I just installed the kernel on the link you posted and have the exact same problem. The boot screen stays on the splash animation. It's been there for more than 15 minutes and the animation itself is slow as hell.
Hi there..
When we switch between GB and JB kernels we must format /system /data and /cache when we flash the new kernel.
Yes, I flashed the kernel in the link and then the gingerdx rom. I did the wipe in data/cache/dalvik cache and everything else that is needed.
The only thing that occured was a problem in the format during the installation. I formated it manually before the install and it was ok.
Sent from my X8 using xda app-developers app GingerDX
sacoplastico said:
Any luck? I just installed the kernel on the link you posted and have the exact same problem. The boot screen stays on the splash animation. It's been there for more than 15 minutes and the animation itself is slow as hell.
Click to expand...
Click to collapse
Full wipe before installing.
Yes..
there must be a problem with wiping...
You might have forgot to full wipe..
Thank you everybody, I finally managed to get GingerDX running. Wiping everything actually worked.
Still took ages to boot but it is finally on!
Maybe u need naa ics kernel.
Sent from my iXperiA 8s using xda app-developers app
erulsza said:
Maybe u need naa ics kernel.
Sent from my iXperiA 8s using xda app-developers app
Click to expand...
Click to collapse
No, you cant flash gb roms with ics kernels.

[Q] LiteCM 10 wont boot!?

i followed the instructions, flashes the kernel, install from zipcard.. and so on (im not a noob) but it wont load.. im stuck at Google animation.
I tried reinstalling, deleting cache, dalvic and so on.. but i cant get it to boot!!
anyone having the same issue??
pls respond.:crying:
do you have format /system /data and /cache?
Flash the kernel again.
Format /system,data,cache
Do factory reset/wipe data
Wipe cache partition, and dalvik cache.
After this flash the rom. :thumbup:
cdeox8 said:
Format /system,data,cache
Flash the kernel again.
Do factory reset/wipe data
Wipe cache partition, and dalvik cache.
After this flash the rom. :thumbup:
Click to expand...
Click to collapse
That should be enough.
Oh and make sure the ROM installs properly i.e. it's not a bad download.
JB
Having the same issue but it's bootlooping at nAa kernel logo, please help, i followed the instructions correctly, tried the solutions you posted, but still no luck...
It shouldn't bootloop at the kernel logo. If the ROM isn't installed properly, it should boot into CWM. Try reflashing kernel and ROM.
Alchemist32 said:
Having the same issue but it's bootlooping at nAa kernel logo, please help, i followed the instructions correctly, tried the solutions you posted, but still no luck...
Click to expand...
Click to collapse
are you using the correct kernel? it shouldn't bootloop. like sgt.meow said it should go to cwm if anything's wrong.
Seems like my phone doesn't accept any custom ROM, i tried flashing GingerCMX with Alps (wiped everything before doing that), tried reflashing kernel, roms, several times and its just not working, my xperia x8 is xxx29 (the sticker under the battery), rooted, unlocked BL and no luck... :'(
Alchemist32 said:
Seems like my phone doesn't accept any custom ROM, i tried flashing GingerCMX with Alps (wiped everything before doing that), tried reflashing kernel, roms, several times and its just not working, my xperia x8 is xxx29 (the sticker under the battery), rooted, unlocked BL and no luck... :'(
Click to expand...
Click to collapse
Did u flash the LibSensor patch?
Sent from my GT-I9100 using xda premium
Titan9119 said:
Did u flash the LibSensor patch?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
that's not really required.
cascabel said:
that's not really required.
Click to expand...
Click to collapse
For Alfs, yes.
Sent from my GT-I9100 using xda premium
Titan9119 said:
For Alfs, yes.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i've used alfs for a couple of roms without that patch. no bootloops or any major bug.
@Titan9119
That libsensor patch is something required at ROM level i.e. after the device has booted up. And even without it, the device would be functional like @cascabel said.
I have the same problem.
I have kernel 2.0.32.61-nAa-06. I cleared the caches as required, flashed the kernel through flashtool and then flashed [ROM] | LiteCM10 | v1.0 | 09/07/2013 | JB 4.1.2 | nAa-06-kernel.
After flashing, I did a system reboot. The phone starts with the nAa kernel logo and then blacks out only to restart on the same. I've left it for a while and it keeps up the exercise. I can initiate the recovery with the back button. But nothing I've done has made a difference. Including repeated flashing.
There were no errors during the installations.
If anyone can help, I'd be most grateful.
aahd81 said:
I have the same problem.
I have kernel 2.0.32.61-nAa-06. I cleared the caches as required, flashed the kernel through flashtool and then flashed [ROM] | LiteCM10 | v1.0 | 09/07/2013 | JB 4.1.2 | nAa-06-kernel.
After flashing, I did a system reboot. The phone starts with the nAa kernel logo and then blacks out only to restart on the same. I've left it for a while and it keeps up the exercise. I can initiate the recovery with the back button. But nothing I've done has made a difference. Including repeated flashing.
There were no errors during the installations.
If anyone can help, I'd be most grateful.
Click to expand...
Click to collapse
full wipe, format data cache and system. flash rom.
cascabel said:
full wipe, format data cache and system. flash rom.
Click to expand...
Click to collapse
Already did that multiple times through the recovery mode. Wipes were completed without errors. The only thing I've not wiped is the SD Card.
aahd81 said:
Already did that multiple times through the recovery mode. Wipes were completed without errors. The only thing I've not wiped is the SD Card.
Click to expand...
Click to collapse
did you format the partitions i mentioned as well? if you did, try reflashing the kernel and rom after redownloading. might be a bad flash even if it looks like nothing went wrong.
No luck
You should go to minicm10 FAQ and look under 19 part.
Sent from my E15i running minicm7
cascabel said:
did you format the partitions i mentioned as well? if you did, try reflashing the kernel and rom after redownloading. might be a bad flash even if it looks like nothing went wrong.
Click to expand...
Click to collapse
I did the formats as well as the wipes. Downloaded the ROM and the kernel again and re-flashed. Now its getting stuck on the kernel after a vibration. Sometimes the mauve coloured light comes on and stays, at other reboots it turns off.. Can't get it into the recovery anymore
---------- Post added at 07:48 AM ---------- Previous post was at 07:31 AM ----------
Lukenda said:
You should go to minicm10 FAQ and look under 19 part.
Sent from my E15i running minicm7
Click to expand...
Click to collapse
Originally Posted by matmutant View Post
change in rom zip to *.61 for kernel version if you want the installation to complete (in META-INF/com/google/android/updater-script)
Click to expand...
Click to collapse
I did read this, and a lot of other posts, before posting. Unfortunately, I don't understand what he is asking me to do there. Which file/filename is being edited?

[SOLVED] no Boot after semaphore 3.3.0s (cm10.2nightly)

I am in latest 10.2 nightly. Wanted to go to semaphore 3.3.0s +hughemem libs. I was on sema3.3.0. Flashed sema3.3.0s via cwm --> stuck on boot.
Flashed 3.3.0s.gar via Odin --> starts, but after restart my phone did not Boot.
So i reflashed 3.3.0 via Odin.
What is wrong with it?
Sent from my GT-I9000 using xda app-developers app
Update:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
s3icc0 said:
lordlambda said:
Hello,
i am not able to ask in semaphore channel...so i want to ask you.
I falshed latest cm10.2 nightly, semaphore 3.3.0s and last but not least the hugemem libs via CWM.
after this my phone stucked on boot. Maybe you know the problem?
Many thanks in advance!!
Lordlambda
Click to expand...
Click to collapse
hugemem libs are not required, so the problem has nothing to do with hugemem libs (you only won't be able to record 720p video), but the fact you are stuck on boot maybe connected with something else ... from what firmware you were flashing? can you describe me your whole procedure (or just try to simply flash CM several times until it will boot and then reboot and instal semaphore ...)
Click to expand...
Click to collapse
I was on cm 10.2 (5.12.) and on kernel 3.3.0. Then i wanted to test the 3.3.0s kernel. so i downloaded it, go to recovery and flashed itvia cwm (Kernel is on external SD). There are no problems with the "normal" kernal version. Only by flashing the "s" my phone stuck on boot. In addition, i clean dalvik and normal cache.
And ofcause, i want to flash hugemem libs if the "s" version will boot normaly.
Many Thanks!
Click to expand...
Click to collapse
Strange, maybe try to reflash from internal storage (u can use file manager in cwm, or mount the phone to pc over usb from recovery to upload the files) and make sure you have the right files (as flashing CM11 accidentally with recovery from semaphore 3.3.0 will not boot). I recommend to redownload carefully both files, place on internal and reflash ... should be fine then.
Click to expand...
Click to collapse
My phone can boot, i falshed 3.3.0.tar via odin....thats not the problem. but i try to flash 3.3.0.s from internal storage. Maybe i have to mound or cleare something more than dalvik and normal cache? mound the sd?
Many Tanks!
Click to expand...
Click to collapse
no ... leave everything default in recovery ... so maybe try flashing 3.3.0s via odin too??? there should be no problem switching between standard and "s" kernel ... make sure you have the same size and MD5 version as in the semaphore topic ...
Click to expand...
Click to collapse
I checkes md5 summ....if i flash 3.3.0s via Odin phone starts but in Nest restart i stuck in Boot too.(in sumsung s screen, cant geht to recovery) same behavior AS after flashing "s" in cwm.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
So try to flash CM only .. boot with CM ... remove semaphore app, then reboot to cwm, install "s" version, turn off the phone (dont reboot system from cwm), boot to recovery adn reflash "s" version again, reboot system, instal semaphore app ...
Click to expand...
Click to collapse
I will give it a try after visiting my dentist. Thank you!
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
np, until I will have ideas I'd like to help
Click to expand...
Click to collapse
install cm10.2, deinstall semaphore app, insatll 3.3.0.s, turn off phone---no chance to get back in cwm
Click to expand...
Click to collapse
strange ... can you send me the locations were you downloaded the 3.3.0s (link to the file)
Click to expand...
Click to collapse
http://78.46.194.137/kernels/Semaphore_JB_3.3.0s.zip
Click to expand...
Click to collapse
sorry, I can't help you more, better to ask in the thread ... as it must be something else in your phone .... or if you don't mind loosing all your data I would recommend to go through odin from stock samsung, just to be sure (that is what I will do in this situation ... complete reinstalation ...) - it will take no more than 30 minutes to get back to stock and back to CM10.2
Click to expand...
Click to collapse
Solution: Flashing 3.3.0s.tar 3times via Odin. After each Flash i let the phone reboot!
Thanks for the info ...but it is strange ...in my 10.2-time i flashed Sema-Kernel only via Odin and it was never a problem ...
Amazing technology sometimes it works perfect and sometimes it doesn`t ...
Good to hear that it works now ...
lordlambda said:
I am in latest 10.2 nightly. Wanted to go to semaphore 3.3.0s +hughemem libs. I was on sema3.3.0. Flashed sema3.3.0s via cwm --> stuck on boot.
Flashed 3.3.0s.gar via Odin --> starts, but after restart my phone did not Boot.
So i reflashed 3.3.0 via Odin.
What is wrong with it?
Sent from my GT-I9000 using xda app-developers app
Update:
Solution: Flashing 3.3.0s.tar 3times via Odin. After each Flash i let the phone reboot!
Click to expand...
Click to collapse

[Q] [PrimeHD 10] Home button is refreshing screen

Hello. I don't know if I'm in good place to write it but I will try. I have Alfs CM7 kernel and PrimeHD 10. After some time of using it, home button stops working. It's not comming back to home screen but it's refreshing actually screen. Only factory reset is solving the problem but I'm loosing every settings, I must install apps etc. Any solutions?
kernel problem
Lotherad said:
Hello. I don't know if I'm in good place to write it but I will try. I have Alfs CM7 kernel and PrimeHD 10. After some time of using it, home button stops working. It's not comming back to home screen but it's refreshing actually screen. Only factory reset is solving the problem but I'm loosing every settings, I must install apps etc. Any solutions?
Click to expand...
Click to collapse
I think you should change the kernel or flash the latest alfs v09 kernel or use nAa kernel.....i used nAa kernel for me no bugs.....
vineeth15 said:
I think you should change the kernel or flash the latest alfs v09 kernel or use nAa kernel.....i used nAa kernel for me no bugs.....
Click to expand...
Click to collapse
WiFi is not working on nAa.
follow this
Lotherad said:
WiFi is not working on nAa.
Click to expand...
Click to collapse
First flash the nAa kernel and then go into recovery and then full wipe including format /system and then again select install zip from sd card then flash the rom and then reboot....this should work...
For me prime hd + nAa kernel everything works perfectly :good::good:

Categories

Resources