Hello. I don't know if I'm in good place to write it but I will try. I have Alfs CM7 kernel and PrimeHD 10. After some time of using it, home button stops working. It's not comming back to home screen but it's refreshing actually screen. Only factory reset is solving the problem but I'm loosing every settings, I must install apps etc. Any solutions?
kernel problem
Lotherad said:
Hello. I don't know if I'm in good place to write it but I will try. I have Alfs CM7 kernel and PrimeHD 10. After some time of using it, home button stops working. It's not comming back to home screen but it's refreshing actually screen. Only factory reset is solving the problem but I'm loosing every settings, I must install apps etc. Any solutions?
Click to expand...
Click to collapse
I think you should change the kernel or flash the latest alfs v09 kernel or use nAa kernel.....i used nAa kernel for me no bugs.....
vineeth15 said:
I think you should change the kernel or flash the latest alfs v09 kernel or use nAa kernel.....i used nAa kernel for me no bugs.....
Click to expand...
Click to collapse
WiFi is not working on nAa.
follow this
Lotherad said:
WiFi is not working on nAa.
Click to expand...
Click to collapse
First flash the nAa kernel and then go into recovery and then full wipe including format /system and then again select install zip from sd card then flash the rom and then reboot....this should work...
For me prime hd + nAa kernel everything works perfectly :good::good:
Related
With nAa kernel on any rom my wifi does¸t work.
Now i am using gingerxperiaray v04 with nAa 10 kernel and also not work.
When i try to turn on my wifi it is not scanning and after 30 seconds wifi by itself turns off and when i wont go to properties or mannual scan it gives me force close.
Any help will be good.
do full wipe and try again!
lorionl said:
do full wipe and try again!
Click to expand...
Click to collapse
I've tried few times but nothing happened
Did you restore anything using TitaniumBackup or anything else?
lorionl said:
Did you restore anything using TitaniumBackup or anything else?
Click to expand...
Click to collapse
what is difference?
Hellboy880 said:
what is difference?
Click to expand...
Click to collapse
if you restore WLAN-Settings with TB it might lead to problems
TB did that, i solved it
another problem for me
after flashing nAa kernel then try to flash MiniCM7-2.1.9-shakira
it bootloops, sometimes it stuck at nAa kernel logo.
when i give reboot, x8 shuts down and doesnt boot until i remove and replace battery. please help me to fix this problem. iam using nAa v11 kernel.
bondgold_x said:
when i give reboot, x8 shuts down and doesnt boot until i remove and replace battery. please help me to fix this problem. iam using nAa v11 kernel.
Click to expand...
Click to collapse
yes it happend with me too,,, bt i was using iRom 5 with nAa11. but now im using gingerxperia and my problem solved. so tell me which rom r u using ?
press thanx if i helped.
I'm using iRom v005 with nAa kernel 11 and everythings works great. Reboot, reboot into recovery - both works with no problem
Maybe there was something wrong during the instalation
1). Copy ROM zip file to SD,
2). Flash kernel,
3). Using CWM (which is built-in nAa kernel) do full wipe and install zip from SD.
This reboot thing is a know bug of kernel.
With nAa 11 it occurs to hang 1 each 10-15 reboots.
X8 ....After unlocking bootloader it went out of SIM signal....imanage to solve this problem.
But i have a mayor problem: I`ve tried to install GingerDx, PrimeHD, MiniCM9, on Sock and Custom Kernels and it always stuks at booting.
Before unlocking bootloader stock kernel ROMs were runnig all right, even PrimeHD 7.0 with nAa 11 worked but not anymore.
Anyone knows what is happening, should i relock and unlock it again?
did you fill wipe? you need to flash kernel, install rom and full wipe
fifo171 said:
did you fill wipe? you need to flash kernel, install rom and full wipe
Click to expand...
Click to collapse
Yes...full wipe= Done...but doesn`t work after full wipping.
well are you sure you have unlocked your bootloader?
re-check with s1tool...if it's unlocked then with flashtool go back to stock rom,kernel(android 2.1) and then root it again install recovery and then first try to install some other rom for stock kernel and then install custom kernel and then custom ROM
Pay attention on your ftf kernel files...i accidently downlaoded U20 nAa kernel instead of x8 nAa kernel...and guest what-->that kernel didn't work so whatch out for which phone is ftf kernel file
i hope i helped
8cpaiw said:
well are you sure you have unlocked your bootloader?
re-check with s1tool...if it's unlocked then with flashtool go back to stock rom,kernel(android 2.1) and then root it again install recovery and then first try to install some other rom for stock kernel and then install custom kernel and then custom ROM
Pay attention on your ftf kernel files...i accidently downlaoded U20 nAa kernel instead of x8 nAa kernel...and guest what-->that kernel didn't work so whatch out for which phone is ftf kernel file
i hope i helped
Click to expand...
Click to collapse
Yes, i`ve done this!!!....The same happens to me with U20 nAa kernel....
I`ve donde exactly what you describe above but i still couldn`t install custom Roms.....pretty weird
Flesh phone with seus and do same procedures again
Sent from my E15i using xda premium
yes that pretty weird but try with SEUS/PCC and then re-do the installation of kernel and rom
.....GOOD LUCK man
8cpaiw said:
yes that pretty weird but try with SEUS/PCC and then re-do the installation of kernel and rom
.....GOOD LUCK man
Click to expand...
Click to collapse
I`ve donde this.....i don`t know how.
I will try all again.
which combination of rom and kernel did you try? try nAa kernel (not the ics one) and MiniCM7 rom
can you make a video and show us your problem?
I finally solve it!!!
Idon`t know how but i repeat the same procedure time after time and i can finally instal GingerDx v025 in Stock kernel.
Thanks to everyone that helped me!!!
Hi, im using cm7 temasek kang build 128 with harsh kernel.
Some times after a phone call i cant wake up the phone,
The wierd thing is that when i had the cm9 i dont have this problem.
Any idea if it is a rom or a kernel problem, and can i fix it?
guy6136206 said:
Hi, im using cm7 temasek kang build 128 with harsh kernel.
Some times after a phone call i cant wake up the phone,
The wierd thing is that when i had the cm9 i dont have this problem.
Any idea if it is a rom or a kernel problem, and can i fix it?
Click to expand...
Click to collapse
Hi
try to restore nandroid or if doesnt work try to re flash the rom or u can go back to stock, in my opinion i think its a kernel fault, tell the clear picture, ur phone doesnt power up or some thing else....
Why flashing CM9 kernel on CM7 Rom?
First, pull out the battery.
Second, pull it back and reboot into recovery by holding Power button+Volume Down+Home button.
Then, make a full wipe and try reflashing the Rom.
If that works, reflash the kernel you want but BE SURE TO FLASH THE RIGHT KERNEL.
If it doesn't work, you should flash back the stock firmware using KDZ Updater, Smartflash or Nvflash.
Stock kernel=Stock Rom
CM7 kernel=CM7 rom
CM9 kernel=CM9 rom
Hope that help.
Sent from my LG-P990hN using xda premium
I searched a lot in all threads to find a similar question or just an answer to my problem.
To start I have to tell you that I already had the v029 installed with the stock kernel and everything was fine.
Then I wanted to check some other roms and if they fit me better. So i got it from the begining. Wiped everything and installed the stock eclair with PCC. Unlocked the bootloader through a very usefull guide found here and flashed the latest nAa kernel. Then I downloaded the MiniCM9 3.0.5 Rom and installed it succesfully.
Everything is working fine but I wanted to go back to GingerDX. So I did a factory reset/wiped everything downloaded the rom for the nAa kernel and installed it. It said that it was successfuly installed. But when I try to boot my phone It stucks on the GingerDX splash screen with the animation and doing nothing. No keys working. I removed the battery to shut down, install the CM9 rom again and everything's fine.
Can you please tell what am I doing wrong? Thanks in advance.
Toumpeki said:
I searched a lot in all threads to find a similar question or just an answer to my problem.
To start I have to tell you that I already had the v029 installed with the stock kernel and everything was fine.
Then I wanted to check some other roms and if they fit me better. So i got it from the begining. Wiped everything and installed the stock eclair with PCC. Unlocked the bootloader through a very usefull guide found here and flashed the latest nAa kernel. Then I downloaded the MiniCM9 3.0.5 Rom and installed it succesfully.
Everything is working fine but I wanted to go back to GingerDX. So I did a factory reset/wiped everything downloaded the rom for the nAa kernel and installed it. It said that it was successfuly installed. But when I try to boot my phone It stucks on the GingerDX splash screen with the animation and doing nothing. No keys working. I removed the battery to shut down, install the CM9 rom again and everything's fine.
Can you please tell what am I doing wrong? Thanks in advance.
Click to expand...
Click to collapse
Wipe cache & dalvik cache while before installing
Sent from my X8 using xda app-developers app
I did and it's stuck again. I waited for 10 minutes before I closed it.
Does the kernel for CM9 supports gb?
Sent from my X8 using xda app-developers app
Wipe cache
dalvik cache
and fix permision
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Toumpeki said:
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Click to expand...
Click to collapse
There is a thanks button...
Press it
Sent from my X8 using xda app-developers app
Toumpeki said:
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Click to expand...
Click to collapse
Any luck? I just installed the kernel on the link you posted and have the exact same problem. The boot screen stays on the splash animation. It's been there for more than 15 minutes and the animation itself is slow as hell.
Hi there..
When we switch between GB and JB kernels we must format /system /data and /cache when we flash the new kernel.
Yes, I flashed the kernel in the link and then the gingerdx rom. I did the wipe in data/cache/dalvik cache and everything else that is needed.
The only thing that occured was a problem in the format during the installation. I formated it manually before the install and it was ok.
Sent from my X8 using xda app-developers app GingerDX
sacoplastico said:
Any luck? I just installed the kernel on the link you posted and have the exact same problem. The boot screen stays on the splash animation. It's been there for more than 15 minutes and the animation itself is slow as hell.
Click to expand...
Click to collapse
Full wipe before installing.
Yes..
there must be a problem with wiping...
You might have forgot to full wipe..
Thank you everybody, I finally managed to get GingerDX running. Wiping everything actually worked.
Still took ages to boot but it is finally on!
Maybe u need naa ics kernel.
Sent from my iXperiA 8s using xda app-developers app
erulsza said:
Maybe u need naa ics kernel.
Sent from my iXperiA 8s using xda app-developers app
Click to expand...
Click to collapse
No, you cant flash gb roms with ics kernels.