when i give reboot, x8 shuts down and doesnt boot until i remove and replace battery. please help me to fix this problem. iam using nAa v11 kernel.
bondgold_x said:
when i give reboot, x8 shuts down and doesnt boot until i remove and replace battery. please help me to fix this problem. iam using nAa v11 kernel.
Click to expand...
Click to collapse
yes it happend with me too,,, bt i was using iRom 5 with nAa11. but now im using gingerxperia and my problem solved. so tell me which rom r u using ?
press thanx if i helped.
I'm using iRom v005 with nAa kernel 11 and everythings works great. Reboot, reboot into recovery - both works with no problem
Maybe there was something wrong during the instalation
1). Copy ROM zip file to SD,
2). Flash kernel,
3). Using CWM (which is built-in nAa kernel) do full wipe and install zip from SD.
This reboot thing is a know bug of kernel.
With nAa 11 it occurs to hang 1 each 10-15 reboots.
Related
yeah i found it in GingerDx thread the way to install it...but ist so simple form noob like me....i need someone to explain step by step please ....
TQ
Put gdx on your SD card
Boot into xRecovery
Select install custom zip
Select the second choice
Select Gdx zip
Wait until it finishes the installation
Make a full wipe ( you will lose your apps contacts and messages so back them up with something)
Reboot
Sent from my Shakira using XDA App
how im suppose to boot from xRecovery??
Turn off your phone and when you see sony ericsson sign start pushing back button and you will go xrecovery (offcourse if you have been instaled it before)
Sent from my E15i using XDA App
yeah already install it but why i face this problem...
"the process com.android.phone has stopped unexpectedly. please try again ." what?
Install phone hotfix V015 via ClockworkMod Recovery...pls see 1st page GDx...
ok last question...i think gingerdx suppport multi touch isnt it? but why i cant use the function....
Maybe you have a Cypress digitizer. Look at the stickies for info and Q&As
Actually, you have to install GDX by using ClockworkMod Recovery.
Take a look at the requirements at GingerDX thread.
i have instaled froyobread. i can install gingerdx?
fabio.freak said:
i have instaled froyobread. i can install gingerdx?
Click to expand...
Click to collapse
Yes you can, but last gingerdx must be installed with cwm
Sent from my E15i using XDA App
First you install a xrecovery-version of GDX, for example v013
than you can install his LinuxDX
and last install the actually v017 of GDX
NO NEED!
tracktrick said:
First you install a xrecovery-version of GDX, for example v013
than you can install his LinuxDX
and last install the actually v017 of GDX
Click to expand...
Click to collapse
If you want use kernel + rom:
- copy zipped rom to sd
- flash kernel
- boot phone, tap screen to get in to recovery
- install custom zip
GingerDX v001~v014 - install with xRecovery
GingerDX v015 and above - install with CWM
Hey Guys
Am kind of lost At the Gdx instruction thingies
Okay i know how 2 install it
..
So
i have the 2.1 ..
With all the required Stuff
the baseband number...etc
So is it now like always?
P.S: My bootloader is unlocked ..
So again is it like always
install ZIP From either Xrec.. Or CWM??
And about the recommendation 2 install The Linux
is it Safe???????
Completely Safe i mean???
And what are the benefits of Linux + GDX ?
..
your answers are gonna be the reason 2 either install the Rom Or not :/
So please HELP?
I did like this :
1.FULL wipe
2.flash gingerdx v017
3.flash linuxdx
And everything is good Is it safe? If you did everything all right its safe now with latest gdx with latest linuxdx i have=NO LAG AT ALL, EVEN WITH MANY APPS INSTALLED AND LOW RAM! ! i really easily recommend it to you
Sent from my X8 using XDA Premium App
If you read carefully GingerDX v014+ requires CWM for install it, for v013- versions you can install with xRecovery.
And GingerDX is safe, little bugs in some versions but with solution in almost all.
In my opinion the battery drain is the most important issue, with the Governor in ONDEMAND my battery drains just in the night 20%, that's a lot. Now, with Smartass, the battery drains just 3% over night.
I don't know about the performance with LinuxDX Kernel. I can't help you with that.
I'm sure that in the respective post you can get more information.
proadi96 said:
I did like this :
1.FULL wipe
2.flash gingerdx v017
3.flash linuxdx
Click to expand...
Click to collapse
Totally wrong order. You should:
1. copy rom to SD
2. flash kernel from PC
3. install rom from X8 recovery
4. full wipe
0 - make backup
rav3n_pl said:
Totally wrong order. You should:
1. copy rom to SD
2. flash kernel from PC
3. install rom from X8 recovery
4. full wipe
0 - make backup
Click to expand...
Click to collapse
Hehe, sory but i did that and it worked so i just post what i did maybe some1 will use it but hey i have a question , how to enter recovery? Coz when i boot my phone there is no Sony Ericsson logo , just after start up after black screen there gigngerdx logo appers so how to enter recovery?
Sent from my X8 using XDA Premium App
Guys for the love of God don't Get me confused ..
Just flash the kernel,ater that do afull wipe, and then flash the ROM in CWM-Recovery.
And if it´s not stable, flash stock ROm with stock kernel again and flash ONLY GingerDX without the Kernel.
Dude
while flashing the Linux
it stopped ..
And told me 2 tick the God damn USB debugging !!
DAMN I FORGOT 2 TICK IT BEFORE !!
And the phone now won't Go ON..
At ALL !!
it just shakes ..
Then nothin
Am trying 2 Fix it with Sony ericsson update service
But the installation is STUCK!
completely it won't Work..
..
Damn????
you should flash by flashtools .
Or the battery is low.. it happened to me once when flashing my gf's x8. It took a while for me to realise it. Lol. Just a suggestion, based from my experienced.
proadi96 said:
but hey i have a question , how to enter recovery? Coz when i boot my phone there is no Sony Ericsson logo , just after start up after black screen there gigngerdx logo appers so how to enter recovery?
Click to expand...
Click to collapse
Sira. said:
Dude
while flashing the Linux
it stopped ..
And told me 2 tick the God damn USB debugging !!
DAMN I FORGOT 2 TICK IT BEFORE !!
And the phone now won't Go ON..
Click to expand...
Click to collapse
KERNEL - this you flashing using FlashToll from PC
ROM - zip file that you installing from CWM or xRecovery
Proper order (I assume that bootloader is unlocked already):
1. Make backup of apps using TitaniumBackup then xRecovery or CWM
2. copy new ROM to SD
3. turn on USB debugging
4. disconnect USB cable
5. shut down phone
6. run FlashTool and press "flash"
7. press and hold "back" button in phone and plug in USB
8. wait for flash is done ("flash complete ... disconnect ...")
9. disconnect USB
10. turn on phone and start tapping screen to enter CWM
11. using CWM menu install custom zip
12. do full wipe
13. reboot
14. wait.... it can take up to 5 mins
15. install Titanium and restore apps
If it will not run you just flash back stock kernel, then seus for stock rom, root it, install xrecovery or cwm and restore backup.
hello guys im new to the forum my problem is that i followed the method to flash a kernel(1st time) and i get the nAa's screen,i also have acess to cwm,then the logo dissapears and the phone stays blanc.(the only thing i can do is pull the battery)
Question: do i have to load the custom rom,then flash the kernel,then the loaded rom?
Install rom via cwm before you must flash kernel then you must wipe cache and enjoy
Press thanks button if i help!
Sent from my E15i using XDA App
flash kernel go to cwm do full wipe wipe dalwik cache wipe cache partition instal rom and reeboot
and what i say roflmao
Sent from my E15i using XDA App
the problem is that after i flash the kernel it doesnt boot to stock rom,the screen remains blank,what should i do??
gagagio said:
the problem is that after i flash the kernel it doesnt boot to stock rom,the screen remains blank,what should i do??
Click to expand...
Click to collapse
here's a few choices
1: Read the forums
2: Sell your phone and buy a 3310
3: actually only 2 choices
and before you ask USE THE SEARCH BUTTON
Lloir said:
here's a few choices
1: Read the forums
2: Sell your phone and buy a 3310
3: actually only 2 choices
and before you ask USE THE SEARCH BUTTON
Click to expand...
Click to collapse
well i read the forums but i didnt discover the same problem as me ...so again is the stock x8 rom not supposed to work after i flash the kenrel or am i doing something wrong?(ican get to cwm).MOreover,do i have to load the custom rom file first,then flash the kernel,then flash the loaded rom?
dude, flash nAa v10. after you flash it, the kernel logo will appear followed by the battery sign.
press power button, the phone will boot and the kernel logo will appear.
you will be sent do CWM Menu.
if you have a compatible ROM for nAa kernel, do a full wipe and reboot and see if the ROM boots successfully.
if you dont have a compatible ROM, do a full wipe, install CM 2.1.8 and then reboot.
U have to unlock bootloader first before flashing kernel,
this is the step (with stock kernel and rom installed and root) :
- unlock bootloader
- flash kernel
- enter cwm
- wipe data
- install custom rom
- wipe data again
- restart system
and ur good to go
gagagio said:
hello guys im new to the forum my problem is that i followed the method to flash a kernel(1st time) and i get the nAa's screen,i also have acess to cwm,then the logo dissapears and the phone stays blanc.(the only thing i can do is pull the battery)
Question: do i have to load the custom rom,then flash the kernel,then the loaded rom?
Click to expand...
Click to collapse
You cant load stock rom with a custom kernel. Just flash GingerDx Rom and you should be fine. Flash the kernel first using the flash tool, then flash the rom using CWM and then turn on the phone
ty very much guys( especially bahmonkeys)!I should have known that
gagagio said:
ty very much guys( especially bahmonkeys)!I should have known that
Click to expand...
Click to collapse
No problem im here to help!!!
Here is a newbie guide to unlock the bootloader
http://forum.xda-developers.com/showthread.php?t=1436924&page=2
After you unlocked BL you can flash the kernel with flashtool (with the latest one)
-Don't forget to copy you're rom to SDcard!
When the nAa logo appears hit the back button and you're in cmw menu.
full wipe->instal custom rom-> reboot your phone !
first flash your kernel and then install custom rom...
I searched a lot in all threads to find a similar question or just an answer to my problem.
To start I have to tell you that I already had the v029 installed with the stock kernel and everything was fine.
Then I wanted to check some other roms and if they fit me better. So i got it from the begining. Wiped everything and installed the stock eclair with PCC. Unlocked the bootloader through a very usefull guide found here and flashed the latest nAa kernel. Then I downloaded the MiniCM9 3.0.5 Rom and installed it succesfully.
Everything is working fine but I wanted to go back to GingerDX. So I did a factory reset/wiped everything downloaded the rom for the nAa kernel and installed it. It said that it was successfuly installed. But when I try to boot my phone It stucks on the GingerDX splash screen with the animation and doing nothing. No keys working. I removed the battery to shut down, install the CM9 rom again and everything's fine.
Can you please tell what am I doing wrong? Thanks in advance.
Toumpeki said:
I searched a lot in all threads to find a similar question or just an answer to my problem.
To start I have to tell you that I already had the v029 installed with the stock kernel and everything was fine.
Then I wanted to check some other roms and if they fit me better. So i got it from the begining. Wiped everything and installed the stock eclair with PCC. Unlocked the bootloader through a very usefull guide found here and flashed the latest nAa kernel. Then I downloaded the MiniCM9 3.0.5 Rom and installed it succesfully.
Everything is working fine but I wanted to go back to GingerDX. So I did a factory reset/wiped everything downloaded the rom for the nAa kernel and installed it. It said that it was successfuly installed. But when I try to boot my phone It stucks on the GingerDX splash screen with the animation and doing nothing. No keys working. I removed the battery to shut down, install the CM9 rom again and everything's fine.
Can you please tell what am I doing wrong? Thanks in advance.
Click to expand...
Click to collapse
Wipe cache & dalvik cache while before installing
Sent from my X8 using xda app-developers app
I did and it's stuck again. I waited for 10 minutes before I closed it.
Does the kernel for CM9 supports gb?
Sent from my X8 using xda app-developers app
Wipe cache
dalvik cache
and fix permision
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Toumpeki said:
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Click to expand...
Click to collapse
There is a thanks button...
Press it
Sent from my X8 using xda app-developers app
Toumpeki said:
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Click to expand...
Click to collapse
Any luck? I just installed the kernel on the link you posted and have the exact same problem. The boot screen stays on the splash animation. It's been there for more than 15 minutes and the animation itself is slow as hell.
Hi there..
When we switch between GB and JB kernels we must format /system /data and /cache when we flash the new kernel.
Yes, I flashed the kernel in the link and then the gingerdx rom. I did the wipe in data/cache/dalvik cache and everything else that is needed.
The only thing that occured was a problem in the format during the installation. I formated it manually before the install and it was ok.
Sent from my X8 using xda app-developers app GingerDX
sacoplastico said:
Any luck? I just installed the kernel on the link you posted and have the exact same problem. The boot screen stays on the splash animation. It's been there for more than 15 minutes and the animation itself is slow as hell.
Click to expand...
Click to collapse
Full wipe before installing.
Yes..
there must be a problem with wiping...
You might have forgot to full wipe..
Thank you everybody, I finally managed to get GingerDX running. Wiping everything actually worked.
Still took ages to boot but it is finally on!
Maybe u need naa ics kernel.
Sent from my iXperiA 8s using xda app-developers app
erulsza said:
Maybe u need naa ics kernel.
Sent from my iXperiA 8s using xda app-developers app
Click to expand...
Click to collapse
No, you cant flash gb roms with ics kernels.
Hello. I don't know if I'm in good place to write it but I will try. I have Alfs CM7 kernel and PrimeHD 10. After some time of using it, home button stops working. It's not comming back to home screen but it's refreshing actually screen. Only factory reset is solving the problem but I'm loosing every settings, I must install apps etc. Any solutions?
kernel problem
Lotherad said:
Hello. I don't know if I'm in good place to write it but I will try. I have Alfs CM7 kernel and PrimeHD 10. After some time of using it, home button stops working. It's not comming back to home screen but it's refreshing actually screen. Only factory reset is solving the problem but I'm loosing every settings, I must install apps etc. Any solutions?
Click to expand...
Click to collapse
I think you should change the kernel or flash the latest alfs v09 kernel or use nAa kernel.....i used nAa kernel for me no bugs.....
vineeth15 said:
I think you should change the kernel or flash the latest alfs v09 kernel or use nAa kernel.....i used nAa kernel for me no bugs.....
Click to expand...
Click to collapse
WiFi is not working on nAa.
follow this
Lotherad said:
WiFi is not working on nAa.
Click to expand...
Click to collapse
First flash the nAa kernel and then go into recovery and then full wipe including format /system and then again select install zip from sd card then flash the rom and then reboot....this should work...
For me prime hd + nAa kernel everything works perfectly :good::good: