Hi,
can someone please post a link to download Odin 1 click for captivate 2.2?
(the one in mobiletechvideos site is dead cos its megaupload)
thanks
ap1618 said:
Hi,
can someone please post a link to download Odin 1 click for captivate 2.2?
(the one in mobiletechvideos site is dead cos its megaupload)
thanks
Click to expand...
Click to collapse
Here is the link to the Heimdall One-click for 2.2
It was found in the sticky for the OneClicks master collection in the Development Section.
Red_81 said:
Here is the link to the Heimdall One-click for 2.2
It was found in the sticky for the OneClicks master collection in the Development Section.
Click to expand...
Click to collapse
I saw this one right after I posted this question... but never used Heimdall... Is it the same as Odin, and safe?
after going to stock, can I flash gingie bootloaders etc using Odin?
thanks
ap1618 said:
I saw this one right after I posted this question... but never used Heimdall... Is it the same as Odin, and safe?
after going to stock, can I flash gingie bootloaders etc using Odin?
thanks
Click to expand...
Click to collapse
It's functionally the same as Odin, just an open source alternative. You can do everything that you can do with Odin.
Its annoying to get work on windows though. IMO atleast.
prbassplayer said:
Its annoying to get work on windows though. IMO atleast.
Click to expand...
Click to collapse
The drivers are a bit wonky, for sure. They only install for one USB port, so then you need to remember which one works every time you flash. I've had mixed results, mostly due to my complete lack of patience and my familiarity with Odin. I just don't want to be the "Just use Odin" guy
Na man I get it
Sent from my ICS powered Captivate using Tapatalk
I want to go to stock 2.2 so that I can install GB... but the Heimdall one says it doesnt wipe user apps... would it be a problem when upgrading to GB bootloaders and then upgrading the ROM?
thanks
prbassplayer said:
Its annoying to get work on windows though. IMO atleast.
Click to expand...
Click to collapse
windows is the only thing that will run on my pc.. Ubuntu HATES my pc.
ap1618 said:
I want to go to stock 2.2 so that I can install GB... but the Heimdall one says it doesnt wipe user apps... would it be a problem when upgrading to GB bootloaders and then upgrading the ROM?
thanks
Click to expand...
Click to collapse
If your upgrading through kies to kk4 official, it takes care of everything for you. It has bootloaders in it, no need to flash separately. As for user apps, why would you WANT to wipe your apps? I've went from jf6 to kb1 to kk4 with kies and never lost an app. And I was rooted when I went to kb1
Related
Odin flash any Odin file from your phone!
The XDA god chainfire put this app together, and I helped him add the Captivate to the list of supported devices yesterday!
flash a whole, or part of: .tar, .tar.md5, modem, even flash the files from inside a ONE CLICK odin, FROM YOUR PHONE!
[28.11.2011] Mobile ODIN v1.20 [ROOT]
bump.......
No heimdall? Heh j/k sounds awesome. Great work guys.
Sent from my I897 using XDA App
can i flash bootloders with this?
jeromechrome1 said:
can i flash bootloders with this?
Click to expand...
Click to collapse
No, you'll still need to use a computer-based Odin/Heimdall to flash bootloaders.
(That's what the IBL/PBL items are that are greyed out in the application.)
My day just got infinitely better.
theprogram said:
My day just got infinitely better.
Click to expand...
Click to collapse
My captivate just got infinitely better
well i have tried this it's flashing to jf6 using cezar flash like a breeze but problem flashing to jf6 the market cant find the mobile odin. and even you dl it on sd card it wont let you install on jf6 stock so i have tried installing the stock leak of kk4 while i was on a i9000 base rom now if you purchase this on market it allows you to automaticaly download the kernel needed to flash now problem here is if your build prop is not tweak to samsung-sgh-i897 build prop it will download the i9000 base kernel which will mess up your flashing and end up on a bootloop going to stock kk4 so still kinda fresh its a go and miss some times it work sometimes end a bootloop this also it does not flash the bootloader from the stock rom so i suggest before you go to stock gb rom flash a captivate base gb loader but got to admit chainfire is really a beast to make an odin on a phone so purchase the app to support him
Can this tool flash .bin file?
please use periods. and sentences. PLEASE.
it is so hard to read a runon sentence like that.
and the proper place to post issues with the app is in the thread where you got it.
dongfangri said:
Can this tool flash .bin file?
Click to expand...
Click to collapse
any file you can flash with odin. except efs and bootloaders.modem.bin files yes.
pda.tar or pda.....
wait...
WTF am I doing???
GO READ THE FRIGGIN THREAD!
Good work Devs
Do you have a direct link or mirror for v1.20? Tried the version on the market and still getting not compatible.
link in the first post, links to his thread, and it has links to the app. also I think it checks compatibility by reading the build.prop, what's wrong are you running and have you messed with your build.prop
Running MIUI. No, not edited build.prop.
well miui is probably the answer, might want to let the Dev know so he can fix that, if possible.
Ok, will do. Thanks
Not compatible with teamhacksung ICS build 6 either.
Sent from my SGH-I897 using Tapatalk
team hacksung's ICS port uses the CM7 partitioning table, and Mobile odin doesnt support re-partitioning. so ya. of course it dont and wont ever work.
I am wondering if it is possible to flash back to a stock rom without hooking up to a computer, is there a stock rom that can be installed right from CWM using a zip on the SD Card?
Only one i remember is a kb1 rom by ou812bkewl.
Thanks, I found that here: http://forum.xda-developers.com/showthread.php?t=963403. This isn't true stock as it was modified but hopefully it does enough to serve it's purpose.
Yeah, but all true"stock"packages are going to be for a flash utility (Odin/Heimdall for the captivate).
check out MOBILE ODIN
Mobile ODIN sounds super promising! That old rom originally suggested did not pan out, won't flash with the newer versions of CWM.
studacris said:
check out MOBILE ODIN
Click to expand...
Click to collapse
Dude, totally forgot about that. Is there an emoticon for "duh?"
Mobile Odin's saying my device is not supported.....I'm going to jump off a cliff lol. What I'm trying to do is flash any other ROM than what I have now. I flashed the RC1.0.1 Captivate ROM and now whenever I try to flash a different ROM it fails assertions. I'm guessing this is the same reason mobile ODIN is saying my device is not supported. I'm not going to be around a computer that I have set-up for ODIN for a few days, looks like I'm waiting. Thanks for trying to help me out folks
Mobile Odin requires you to be Rooted. And this flashes the firmware files, not cwm.zips files. (Not sure what u tried and why it said u weren't supported.)
I believe he's talking about the ICSSGS RC 1.0.1. From demonwave(which is rooted). If so, he's stuck if he doesn't have a computer. I had this on my Dev captivate and i couldn't flash from ics to cm7.
I think part of the not supported problem is the screen density, part is the build.prop. Just my $.02.
mrhaley30705 said:
I believe he's talking about the ICSSGS RC 1.0.1. From demonwave(which is rooted). If so, he's stuck if he doesn't have a computer. I had this on my Dev captivate and i couldn't flash from ics to cm7.
I think part of the not supported problem is the screen density, part is the build.prop. Just my $.02.
Click to expand...
Click to collapse
Ok, gotcha. So how did u get off of ICS ?? Flash stock kf1 ??
oooppss off day today...don't mind this misplaced post
4-2ndtwin said:
Ok, gotcha. So how did u get off of ICS ?? Flash stock kf1 ??
Click to expand...
Click to collapse
Yeah. Only way possible for me.
That's exactly my problem.
Sent from my I9000 using XDA App
every time i try to flash KK4 , KJ3 with bootloaders Odin One Click .. it bricks my phone [black screen]
and i can't restore KJ3 by original odin
the one click program stops in the first operation > re-partioning ...i tried a one without re-partioning but it also fails
what can i do ??
Master-ZizO said:
every time i try to flash KK4 , KJ3 with bootloaders Odin One Click .. it bricks my phone [black screen]
and i can't restore KJ3 by original odin
the one click program stops in the first operation > re-partioning ...i tried a one without re-partioning but it also fails
what can i do ??
Click to expand...
Click to collapse
You mentioned in another thread that you already have GB 2.3.5 running on your phone. Why you're trying to flash GB with bootloaders again and again? You already have GB bootloaders! The only way to brick Captivate permanently is to mess the bootloaders. I did send you JB upgrade guide on PM, did you read it?
Val D. said:
You mentioned in another thread that you already have GB 2.3.5 running on your phone. Why you're trying to flash GB with bootloaders again and again? You already have GB bootloaders! The only way to brick Captivate permanently is to mess the bootloaders. I did send you JB upgrade guide on PM, did you read it?
Click to expand...
Click to collapse
Ya Sorry i missed the MSG
But i read about GB Bootloaders that u can go to Download mode with 3 Button Combo
i can't go to download mode ... only i can with ADB Fastboot
Master-ZizO said:
Ya Sorry i missed the MSG
But i read about GB Bootloaders that u can go to Download mode with 3 Button Combo
i can't go to download mode ... only i can with ADB Fastboot
Click to expand...
Click to collapse
OK, make sure you still can put your phone to Download Mode. Make sure your PC has correct drivers for Captivate and actually sees the phone. Use original Samsung USB cable only, not a cheap replacement. Flash KK4 without bootloaders (or any other GB stock ROM), you already have GB bootloaders. Test your phone after flashing and If everything looks good, follow the steps in JB upgrade guide.
Val D. said:
OK, make sure you still can put your phone to Download Mode. Make sure your PC has correct drivers for Captivate and actually sees the phone. Use original Samsung USB cable only, not a cheap replacement. Flash KK4 without bootloaders (or any other GB stock ROM), you already have GB bootloaders. Test your phone after flashing and If everything looks good, follow the steps in JB upgrade guide.
Click to expand...
Click to collapse
i found a bootloader "galaxys-bootloader-JVB.tar.md5" 1.5 MB from JVB 2.3.3 Rom can i flash it ?
i will try ur solution but i am searching for a KK4 download link without odin one click .. do u have ?
Master-ZizO said:
i found a bootloader "galaxys-bootloader-JVB.tar.md5" 1.5 MB from JVB 2.3.3 Rom can i flash it ?
Click to expand...
Click to collapse
I see you are desperately trying to kill your Captivate...
Again, please read the guide - all you need is there, including links to stock firmware, with and without bootloaders.
Idiot-Proof All-in-one Guide to Making Your Samsung Captivate Awesome
Val D. said:
I see you are desperately trying to kill your Captivate...
Again, please read the guide - all you need is there, including links to stock firmware, with and without bootloaders.
Idiot-Proof All-in-one Guide to Making Your Samsung Captivate Awesome
Click to expand...
Click to collapse
i see u can't understand me ... the links in the guide is the same links in XDA Fourm
Odin One Click bricked my phone .. okay !
i will try heimdall .. but am asking for the KK4 pda Link only
and i got da link now >> Here
Master-ZizO said:
i see u can't understand me ... the links in the guide is the same links in XDA Fourm
Odin One Click bricked my phone .. okay !
i will try heimdall .. but am asking for the KK4 pda Link only
Click to expand...
Click to collapse
Honestly, I can't understand you. First you said you are running GB 2.3.5, then on PM you told me you are on Slim6, then you told me you are on GB 2.3.5 again, now seems like you are trying to reflash stock ROM for some reason, you are flashing GB bootloaders over GB bootloaders you already have, you are asking me if it's OK to flash galaxy s bootloaders... I don't understand what is happening and what you are trying to do.
I had to go back to stock a few times and the packages are good. The issue you have is most likely somewhere around drivers/connection. Fix this and you are good. Careful with heimdal flashing, drivers must be installed for the specific USB port you are using. And please stop flashing those bootloaders, you are going to brick permanently your Captivate sooner or later. Read this guide too http://forum.xda-developers.com/showthread.php?t=1350266, very useful information.
i was on 2.3.5 KJ3 without bootloader and i go to download mode only with Fastboot ADB
now i downloaded Heimdall OneClick KK4 and got the Firmware files from "Temp"
i compared the bootloader "boot.bin, Sbl.bin" with the files in galaxys-bootloader-JVB.tar.md5
it has the same size in bytes and same MD5Hash !! oOo
i was write to flash this bootloader ... will try and tell u the result
They got the same bootloaders in this guide .... i make this topic cuz i need this guide thank u
Master-ZizO said:
i was on 2.3.5 KJ3 without bootloader...
Click to expand...
Click to collapse
If you ever had GB running on your phone, you already have GB bootloaders. No need to flash bootloaders again and again.
Val D. said:
If you ever had GB running on your phone, you already have GB bootloaders. No need to flash bootloaders again and again.
Click to expand...
Click to collapse
So how i can go to download mode with 3 Combo buttons ?
Master-ZizO said:
So how i can go to download mode with 3 Combo buttons ?
Click to expand...
Click to collapse
It's 2 buttons + USB cable.
Hey there,
I was trying to fix up a friends captivate and attempted to use the odin oneclick to restore back to stock 2.1. This was before i read that it only works on phones below 1010. I know let the flaming begin. I ran across the thread http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36 for restoring to I897UCJH2 Firmware for phones over 1010 but all the links relating to this are dead. I have searched high and low for these files. Does anybody have any advice or the files i need?
ncpanicfan said:
Hey there,
I was trying to fix up a friends captivate and attempted to use the odin oneclick to restore back to stock 2.1. This was before i read that it only works on phones below 1010. I know let the flaming begin. I ran across the thread http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36 for restoring to I897UCJH2 Firmware for phones over 1010 but all the links relating to this are dead. I have searched high and low for these files. Does anybody have any advice or the files i need?
Click to expand...
Click to collapse
I'd suggest going directly for Odin KK4 (GB 3.5). It can be found in the stickies.
What ROM/version was he on before trying to flash stock 2.1?
BWolf56 said:
I'd suggest going directly for Odin KK4 (GB 3.5). It can be found in the stickies.
What ROM/version was he on before trying to flash stock 2.1?
Click to expand...
Click to collapse
He was on stock 2.2 I found this (i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe) from this post http://forum.xda-developers.com/showthread.php?t=1300843&highlight=uckk4
does this look right? If I have drivers and odin recognizes the phone I'm good to go?
ncpanicfan said:
He was on stock 2.2 I found this (i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe) from this post http://forum.xda-developers.com/showthread.php?t=1300843&highlight=uckk4
does this look right? If I have drivers and odin recognizes the phone I'm good to go?
Click to expand...
Click to collapse
Yes indeed. Just make sure nothing interrupts it!
BWolf56 said:
Yes indeed. Just make sure nothing interrupts it!
Click to expand...
Click to collapse
:good::good::good::good::good::good::good::good:
Shew! Worked like a charm.
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Tyannt said:
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Click to expand...
Click to collapse
They both work. Just make sure you get the right version.
BWolf56 said:
They both work. Just make sure you get the right version.
Click to expand...
Click to collapse
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Tyannt said:
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Click to expand...
Click to collapse
TiBu is my personal fav.
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Tyannt said:
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Click to expand...
Click to collapse
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Tyannt said:
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Click to expand...
Click to collapse
First thing: don't use kies at all!
There are no JB bootloaders for the cappy, just eclair, froyo and GB. If the ROM is a port, you'll most likely have to flash the I9000 gb bootloaders but I'd suggest finding another ROM to start with (like CM). Playing with bootloaders is the only thing that will make your phone a paper weight if something goes wrong.
Also, bootloaders aren't included in roms for safety measures. That being said, you can run ICS and JB roms just fine with the GB bootloaders.
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
Sent from my SGH-I747 using xda app-developers app
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Tyannt said:
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Click to expand...
Click to collapse
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
BWolf56 said:
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
Click to expand...
Click to collapse
--------------------------------------------------
* I haven't knowingly flashed GB bootloaders.
* I've been all over the link you provided... no working downloads.
Hmmm, I did try "Odin" a couple of times to get the GingerBread update...After doing that my phone now
boots to the AT&T logo, goes black for a sec and a screen like a bad tv signal comes up! Also, the phone
is now charging and showing the big battery icon! I seem to recall reading somewhere that if that happens
it may be wrong bootloaders? Can't remember exactly what it said but am I correct thinking it was one of
your own replies to another member?
Anyway, done for the night Grrrr
Thanks so much!
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
4-2ndtwin said:
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Tyannt said:
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Click to expand...
Click to collapse
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
BWolf56 said:
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
Click to expand...
Click to collapse
Hey there!
* 4-2ndtwin chimed in and said he would post when he uploaded them.
Been looking in the meantime.
* I have both Odin versions, now understand that I can use Odin to flash any file I choose, such as the Corn kernal, not just files it may come with.
* I downloaded a "Stocki897uckk4-zImage.tar, unzipping shows "zImage" file but I
haven't touched it.
Just hanging in for a working link for the Odin KK4 One-Click I guess...
Question!!!
For clarification..Odin KK4 One-Click is just bootloaders, kernal and maybe modem, right? It's not going to give me a working ROM...OR, is it ALSO an alternative way to flash a ROM when I can't add a ROM zip to my phone thru my PC to flash?
Lol... I'll get a handle on this, more of a visual type
As usual, appreciate the help!
Stock KK4 Links up.
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
4-2ndtwin said:
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
Click to expand...
Click to collapse
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Tyannt said:
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Click to expand...
Click to collapse
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
BWolf56 said:
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
Click to expand...
Click to collapse
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Tyannt said:
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Click to expand...
Click to collapse
I suggest you start with CM.
As for rooting, you can get it directly on the store now (was recently made legal). I believe it's by chainfire. But do you need it atm?
Also, all custom roms come pre-rooted.
Sent from my SGH-I747 using xda app-developers app