every time i try to flash KK4 , KJ3 with bootloaders Odin One Click .. it bricks my phone [black screen]
and i can't restore KJ3 by original odin
the one click program stops in the first operation > re-partioning ...i tried a one without re-partioning but it also fails
what can i do ??
Master-ZizO said:
every time i try to flash KK4 , KJ3 with bootloaders Odin One Click .. it bricks my phone [black screen]
and i can't restore KJ3 by original odin
the one click program stops in the first operation > re-partioning ...i tried a one without re-partioning but it also fails
what can i do ??
Click to expand...
Click to collapse
You mentioned in another thread that you already have GB 2.3.5 running on your phone. Why you're trying to flash GB with bootloaders again and again? You already have GB bootloaders! The only way to brick Captivate permanently is to mess the bootloaders. I did send you JB upgrade guide on PM, did you read it?
Val D. said:
You mentioned in another thread that you already have GB 2.3.5 running on your phone. Why you're trying to flash GB with bootloaders again and again? You already have GB bootloaders! The only way to brick Captivate permanently is to mess the bootloaders. I did send you JB upgrade guide on PM, did you read it?
Click to expand...
Click to collapse
Ya Sorry i missed the MSG
But i read about GB Bootloaders that u can go to Download mode with 3 Button Combo
i can't go to download mode ... only i can with ADB Fastboot
Master-ZizO said:
Ya Sorry i missed the MSG
But i read about GB Bootloaders that u can go to Download mode with 3 Button Combo
i can't go to download mode ... only i can with ADB Fastboot
Click to expand...
Click to collapse
OK, make sure you still can put your phone to Download Mode. Make sure your PC has correct drivers for Captivate and actually sees the phone. Use original Samsung USB cable only, not a cheap replacement. Flash KK4 without bootloaders (or any other GB stock ROM), you already have GB bootloaders. Test your phone after flashing and If everything looks good, follow the steps in JB upgrade guide.
Val D. said:
OK, make sure you still can put your phone to Download Mode. Make sure your PC has correct drivers for Captivate and actually sees the phone. Use original Samsung USB cable only, not a cheap replacement. Flash KK4 without bootloaders (or any other GB stock ROM), you already have GB bootloaders. Test your phone after flashing and If everything looks good, follow the steps in JB upgrade guide.
Click to expand...
Click to collapse
i found a bootloader "galaxys-bootloader-JVB.tar.md5" 1.5 MB from JVB 2.3.3 Rom can i flash it ?
i will try ur solution but i am searching for a KK4 download link without odin one click .. do u have ?
Master-ZizO said:
i found a bootloader "galaxys-bootloader-JVB.tar.md5" 1.5 MB from JVB 2.3.3 Rom can i flash it ?
Click to expand...
Click to collapse
I see you are desperately trying to kill your Captivate...
Again, please read the guide - all you need is there, including links to stock firmware, with and without bootloaders.
Idiot-Proof All-in-one Guide to Making Your Samsung Captivate Awesome
Val D. said:
I see you are desperately trying to kill your Captivate...
Again, please read the guide - all you need is there, including links to stock firmware, with and without bootloaders.
Idiot-Proof All-in-one Guide to Making Your Samsung Captivate Awesome
Click to expand...
Click to collapse
i see u can't understand me ... the links in the guide is the same links in XDA Fourm
Odin One Click bricked my phone .. okay !
i will try heimdall .. but am asking for the KK4 pda Link only
and i got da link now >> Here
Master-ZizO said:
i see u can't understand me ... the links in the guide is the same links in XDA Fourm
Odin One Click bricked my phone .. okay !
i will try heimdall .. but am asking for the KK4 pda Link only
Click to expand...
Click to collapse
Honestly, I can't understand you. First you said you are running GB 2.3.5, then on PM you told me you are on Slim6, then you told me you are on GB 2.3.5 again, now seems like you are trying to reflash stock ROM for some reason, you are flashing GB bootloaders over GB bootloaders you already have, you are asking me if it's OK to flash galaxy s bootloaders... I don't understand what is happening and what you are trying to do.
I had to go back to stock a few times and the packages are good. The issue you have is most likely somewhere around drivers/connection. Fix this and you are good. Careful with heimdal flashing, drivers must be installed for the specific USB port you are using. And please stop flashing those bootloaders, you are going to brick permanently your Captivate sooner or later. Read this guide too http://forum.xda-developers.com/showthread.php?t=1350266, very useful information.
i was on 2.3.5 KJ3 without bootloader and i go to download mode only with Fastboot ADB
now i downloaded Heimdall OneClick KK4 and got the Firmware files from "Temp"
i compared the bootloader "boot.bin, Sbl.bin" with the files in galaxys-bootloader-JVB.tar.md5
it has the same size in bytes and same MD5Hash !! oOo
i was write to flash this bootloader ... will try and tell u the result
They got the same bootloaders in this guide .... i make this topic cuz i need this guide thank u
Master-ZizO said:
i was on 2.3.5 KJ3 without bootloader...
Click to expand...
Click to collapse
If you ever had GB running on your phone, you already have GB bootloaders. No need to flash bootloaders again and again.
Val D. said:
If you ever had GB running on your phone, you already have GB bootloaders. No need to flash bootloaders again and again.
Click to expand...
Click to collapse
So how i can go to download mode with 3 Combo buttons ?
Master-ZizO said:
So how i can go to download mode with 3 Combo buttons ?
Click to expand...
Click to collapse
It's 2 buttons + USB cable.
Related
I am about to flash back to JF6 using Heimdall and the package found in this thread:
http://forum.xda-developers.com/showthread.php?t=1191094&highlight=stock+heimdall
My question is that after I complete the return to JF6 what will I need to do in the way of bootloaders in order to flash to a ROM such as MIUI, Mosaic or CM? The thread also says it "should SIM lock the phone." In order to prevent that I need to take the SIM card out, correct? I thought that was supposed to be done anyway when going back to stock? Thanks in advance.
EDIT: I'm a Mac user and have been on Continuum 4.1, pretty much since it was released, so I am a newb to bootloaders.
If you have not messed with boot loaders before there is no reason you have to flash stock and or boot loaders in order to flash CM7 or MIUI. They do not require GB boot loaders although you can use the captivate GB boot loaders, but since you are a Mac user you can not use the odin one click for them located in development.
Mossiac will require GB boot loaders which you will have to become more familiar with Heimdall and located the neccessary sbl and pbl for GB
Proceed with caution, boot loaders are the greatest risk to brick your phone. the flash only takes a second but if it fails at the wrong place, turn off the lights
GB bootloaders aren't that hard to flash. Download the KF1 package from samfirmware.com and unpack everything and just set up where everything goes. If you need help there's a simple how to on MobileTechVideos.
prbassplayer said:
GB bootloaders aren't that hard to flash. Download the KF1 package from samfirmware.com and unpack everything and just set up where everything goes. If you need help there's a simple how to on MobileTechVideos.
Click to expand...
Click to collapse
Please note that there is already Odin one click I897 GB bootloaders in the Dev section.
popfan said:
Please note that there is already Odin one click I897 GB bootloaders in the Dev section.
Click to expand...
Click to collapse
He said Mac, I haven't seen 1 click Heimdall for it. Correct me if im wrong though.
Hi,
can someone please post a link to download Odin 1 click for captivate 2.2?
(the one in mobiletechvideos site is dead cos its megaupload)
thanks
ap1618 said:
Hi,
can someone please post a link to download Odin 1 click for captivate 2.2?
(the one in mobiletechvideos site is dead cos its megaupload)
thanks
Click to expand...
Click to collapse
Here is the link to the Heimdall One-click for 2.2
It was found in the sticky for the OneClicks master collection in the Development Section.
Red_81 said:
Here is the link to the Heimdall One-click for 2.2
It was found in the sticky for the OneClicks master collection in the Development Section.
Click to expand...
Click to collapse
I saw this one right after I posted this question... but never used Heimdall... Is it the same as Odin, and safe?
after going to stock, can I flash gingie bootloaders etc using Odin?
thanks
ap1618 said:
I saw this one right after I posted this question... but never used Heimdall... Is it the same as Odin, and safe?
after going to stock, can I flash gingie bootloaders etc using Odin?
thanks
Click to expand...
Click to collapse
It's functionally the same as Odin, just an open source alternative. You can do everything that you can do with Odin.
Its annoying to get work on windows though. IMO atleast.
prbassplayer said:
Its annoying to get work on windows though. IMO atleast.
Click to expand...
Click to collapse
The drivers are a bit wonky, for sure. They only install for one USB port, so then you need to remember which one works every time you flash. I've had mixed results, mostly due to my complete lack of patience and my familiarity with Odin. I just don't want to be the "Just use Odin" guy
Na man I get it
Sent from my ICS powered Captivate using Tapatalk
I want to go to stock 2.2 so that I can install GB... but the Heimdall one says it doesnt wipe user apps... would it be a problem when upgrading to GB bootloaders and then upgrading the ROM?
thanks
prbassplayer said:
Its annoying to get work on windows though. IMO atleast.
Click to expand...
Click to collapse
windows is the only thing that will run on my pc.. Ubuntu HATES my pc.
ap1618 said:
I want to go to stock 2.2 so that I can install GB... but the Heimdall one says it doesnt wipe user apps... would it be a problem when upgrading to GB bootloaders and then upgrading the ROM?
thanks
Click to expand...
Click to collapse
If your upgrading through kies to kk4 official, it takes care of everything for you. It has bootloaders in it, no need to flash separately. As for user apps, why would you WANT to wipe your apps? I've went from jf6 to kb1 to kk4 with kies and never lost an app. And I was rooted when I went to kb1
Hi Guys!
Well ... sorry if its a stupid question but seems like im new to this.
I rooted my Note using Odin, that worked well. Then i wanted to install LiquidSmooth rom and used mobile odin to flash the zimage that was inside the liquidsmooth rom ... and now the phone doesnt want to boot anymore. Can anyone help?
U flashed a leaked ICS kernel on a GB rom?? Is that ur sayin.
IdleKing said:
Hi Guys!
Well ... sorry if its a stupid question but seems like im new to this.
I rooted my Note using Odin, that worked well. Then i wanted to install LiquidSmooth rom and used mobile odin to flash the zimage that was inside the liquidsmooth rom ... and now the phone doesnt want to boot anymore. Can anyone help?
Click to expand...
Click to collapse
Please read the instructions in his post
You are on 2.3.6
1. Install Mobile Odin
2. Flash REPACK_LP1 CF
3. Let Rom Boot
4. Go to CWM and flash LiquidSmooth
5. Wipe Data, Wipe Dalvik/Cache
NoRmAlY_CrAzY said:
U flashed a leaked ICS kernel on a GB rom?? Is that ur sayin.
Click to expand...
Click to collapse
Hi! Yes, now that you say it this way thats what i have done. Because in some tut it was said to do it that way, but i guess they were talking about flashing a GB rom/zimage.
IdleKing said:
Hi! Yes, now that you say it this way thats what i have done. Because in some tut it was said to do it that way, but i guess they were talking about flashing a GB rom/zimage.
Click to expand...
Click to collapse
not really answering the question xD Are you ok GB or ICS right now?
Zimage came from an ICS Rom but im still running a 2.3.6
Cant i flash the correct one through the download mode?
IdleKing said:
Zimage came from an ICS Rom but im still running a 2.3.6
Cant i flash the correct one through the download mode?
Click to expand...
Click to collapse
As the install guide says you are meant to flash the repack and then go into recovery and flash the rom. You will likely need to flash a gb kernel via obin and then do as hia install guide says
Sent from my GT-N7000 using xda premium
Ok, thanks for your help so far.
So you mean the PC version of Odin. In which state will i have to bring my phone in order to do so? Where do i get the GB kernel from?
Would be really cool if you could help me further.
IdleKing said:
Ok, thanks for your help so far.
So you mean the PC version of Odin. In which state will i have to bring my phone in order to do so? Where do i get the GB kernel from?
Would be really cool if you could help me further.
Click to expand...
Click to collapse
Well i am not 100% sure, tbh your safest route would be to re flash a stock gb rom then root it and then try again just to make sure theres no issues, in which case you can download a gb rom from the sticky in the dev section (make sure its a older rootable image!) and flash using odin while your phone is in download mode
please start at http://forum.xda-developers.com/showthread.php?t=1424997 then/or http://forum.xda-developers.com/showthread.php?t=1329360
i am hoping of course, that you can still somehow manage to get into download mode.
I has almost the same issue! I am running speedmod kernel and i want to put back the cf-root 5.3 kernel so I flashed the tar which was included the zimage via mobile oding and after reboot the phone gave me a blank screen and no recovery! only downlaod mmod where I can manage to flash speedmod again via pc odin...
why is that happend?
Come on mate have you even read the opening page for the liquid smoother rom on all opening pages it tells you to the letter how to install and yet you don't follow it and wonder y you have a black screen. Have you installed clock work recovery after rooting your note if not search how to install cwm on you tube cursed4eva is a brilliant guy who spells it all out for you- . Please don't use the fact you a noob as an excuse as I'm probably newer than you but can read and follow instructions to the letter as the developer knows best.
W00t! The phone came back to life! Thanks alot.
Now, what i dont understand is that repack_lp1 thing. I downloaded I9220LP1-N7000-ICS-REPACK.tar ... now do i flash this one using mobile odin? Will this install the CFM?
Look for cursed4eva on YouTube watch the video were he shows you how to install clockwork then read the op of liquid smooth rom simple !
Please do some more research before randomly flashing files without having any knowledge as to what they do.
Before you start fiddling with repacks and leaked ICS based roms, read this: http://forum.xda-developers.com/showthread.php?t=1633938
If you still think it's a good idea to flash anything based on the leaked ICS builds, go to the thread of the rom you want to flash and read the instructions. Again, read the instructions and then to be sure read the instructions once more.
Then follow the instructions step by step and you're good to go.
From my rooted GB Chrack's rom I just used PC odin to flash AbyssNotekernel42CWTouchOriginalLogo.tar then I flashed Liquid Smooth rom without problem. However you should follow the instruction from their website.
tknguyencsu said:
From my rooted GB Chrack's rom I just used PC odin to flash AbyssNotekernel42CWTouchOriginalLogo.tar then I flashed Liquid Smooth rom without problem.
Click to expand...
Click to collapse
This snippet of information can only further confuse a man who's mustering the courage to step into the unknown. Don't post stuff like that in threads like this. You can tell that to me or any other vet, and we'll know what you're talking about. OP won't.
tknguyencsu said:
However you should follow the instruction from their website.
Click to expand...
Click to collapse
Now THIS is what he needs to hear.
Anyone got a easy step by step guide to go from ICS Stunner to the GERMAN STOCK OFFICIAL that is floating around in the forums???
Do i have to go back to gingerbread and then do upgrade or is there a easier process to go from stunner to stock Germany?
Thanks in advance i am sure there are others that are thinking this same thing as the ICS STunner was the popular rom with ICS
falgun said:
Anyone got a easy step by step guide to go from ICS Stunner to the GERMAN STOCK OFFICIAL that is floating around in the forums???
Do i have to go back to gingerbread and then do upgrade or is there a easier process to go from stunner to stock Germany?
Thanks in advance i am sure there are others that are thinking this same thing as the ICS STunner was the popular rom with ICS
Click to expand...
Click to collapse
Just use good old mobile odin and flash the rom, make sure you use the wipe settings to
i was also on ics stunner 1.4.26.1 i just downloaded the stock rom copied the tar.md5 file and flashed it through mobile odin pro, these steps worked for me, but however there is a problem with my samsung keyboard whatever keys i type it only shows null null ... changed it to swype keyboard there is no problem with swype but however there is a problem with samsung keyboard in this build
so basically install mobile ODIN, Put the tar.md5 file on sd card, point mobile odin to the md5 file and use wipe settings and thats it?
sounds easy downloading the file now hope it works if i am wrong in this procedure or if anyone can add extra things i should do before i flash let me know thank you!!!
Do not use mobile odin to flash from a rom that uses the leaked kernel repack;
Use PC odin.
You risk permanently bricking your note.
Azeazezar said:
Do not use mobile odin to flash from a rom that uses the leaked kernel repack;
Use PC odin.
You risk permanently bricking your note.
Click to expand...
Click to collapse
Can you kindly give me a step by step then if possible? some say use mobile some say dont? what is best way to flash [email protected]!!!
You can use Mobile Odin but it's not recommended if you're on a leaked ROM/kernel. Use PC Odin and flash it from there.
Just follow the short "guide" here.
falgun said:
Can you kindly give me a step by step then if possible? some say use mobile some say dont? what is best way to flash [email protected]!!!
Click to expand...
Click to collapse
Flash the ICS ROM that is already prerooted form this thread, it's stock ICS with only root.. Flash it with PC Odin and you're good to go..
Ok guys here goes.
I downloaded one of the stock ICS roms. For Premium Suite make sure its bigger than 600MB. There is various sources.
I flashed using PC Odin (V1.85) then did a full wipe after flashing. Its all running buttery smooth now. Enjoy!
(First boot will take a while. Just wait it out. Any longer then 15 mins, get worried!)
Azeazezar said:
Do not use mobile odin to flash from a rom that uses the leaked kernel repack;
Use PC odin.
You risk permanently bricking your note.
Click to expand...
Click to collapse
Note : If you have i9220 bootloader, dont use pc odin, mobile odin will work. There is no way to remove bootloader till now .Chaifire have brick his device due to this. AFAIK i9220 repack LP5 only have this bootloader
Source : from chantier's post
http://forum.xda-developers.com/showpost.php?p=25916135&postcount=1840
binhntbv said:
Note : If you have i9220 bootloader, dont use pc odin, mobile odin will work. There is no way to remove bootloader till now .Chaifire have brick his device due to this. AFAIK i9220 repack LP5 only have this bootloader
Source : from chantier's post
http://forum.xda-developers.com/showpost.php?p=25916135&postcount=1840
Click to expand...
Click to collapse
WRONG
I am talking about kernels, not bootloaders.
If you use mobile odin, it will use the bugged kernel to flash the mobile odin kernel, therefore risking bricking your phone.
The risk is a lot smaller then using CWM recovery to flash a rom, but it is still there.
I do not know which extra steps to take if you have a different bootloader.
binhntbv said:
Note : If you have i9220 bootloader, dont use pc odin, mobile odin will work. There is no way to remove bootloader till now .Chaifire have brick his device due to this. AFAIK i9220 repack LP5 only have this bootloader
Source : from chantier's post
http://forum.xda-developers.com/showpost.php?p=25916135&postcount=1840
Click to expand...
Click to collapse
Do not confuse people with incorrect information.
Only those who somehow managed to flash Chainfire's original LP5 repack have said
bootloaders.
Since that flashing procedure is so complicated, I doubt there's more than 1-2
users who managed to do that.
And don't use red fonts to post panicky and false warnings.
so dumb question i have the international version of note in USA - can I use the german rom or ??
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Tyannt said:
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Click to expand...
Click to collapse
They both work. Just make sure you get the right version.
BWolf56 said:
They both work. Just make sure you get the right version.
Click to expand...
Click to collapse
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Tyannt said:
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Click to expand...
Click to collapse
TiBu is my personal fav.
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Tyannt said:
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Click to expand...
Click to collapse
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Tyannt said:
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Click to expand...
Click to collapse
First thing: don't use kies at all!
There are no JB bootloaders for the cappy, just eclair, froyo and GB. If the ROM is a port, you'll most likely have to flash the I9000 gb bootloaders but I'd suggest finding another ROM to start with (like CM). Playing with bootloaders is the only thing that will make your phone a paper weight if something goes wrong.
Also, bootloaders aren't included in roms for safety measures. That being said, you can run ICS and JB roms just fine with the GB bootloaders.
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
Sent from my SGH-I747 using xda app-developers app
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Tyannt said:
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Click to expand...
Click to collapse
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
BWolf56 said:
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
Click to expand...
Click to collapse
--------------------------------------------------
* I haven't knowingly flashed GB bootloaders.
* I've been all over the link you provided... no working downloads.
Hmmm, I did try "Odin" a couple of times to get the GingerBread update...After doing that my phone now
boots to the AT&T logo, goes black for a sec and a screen like a bad tv signal comes up! Also, the phone
is now charging and showing the big battery icon! I seem to recall reading somewhere that if that happens
it may be wrong bootloaders? Can't remember exactly what it said but am I correct thinking it was one of
your own replies to another member?
Anyway, done for the night Grrrr
Thanks so much!
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
4-2ndtwin said:
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Tyannt said:
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Click to expand...
Click to collapse
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
BWolf56 said:
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
Click to expand...
Click to collapse
Hey there!
* 4-2ndtwin chimed in and said he would post when he uploaded them.
Been looking in the meantime.
* I have both Odin versions, now understand that I can use Odin to flash any file I choose, such as the Corn kernal, not just files it may come with.
* I downloaded a "Stocki897uckk4-zImage.tar, unzipping shows "zImage" file but I
haven't touched it.
Just hanging in for a working link for the Odin KK4 One-Click I guess...
Question!!!
For clarification..Odin KK4 One-Click is just bootloaders, kernal and maybe modem, right? It's not going to give me a working ROM...OR, is it ALSO an alternative way to flash a ROM when I can't add a ROM zip to my phone thru my PC to flash?
Lol... I'll get a handle on this, more of a visual type
As usual, appreciate the help!
Stock KK4 Links up.
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
4-2ndtwin said:
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
Click to expand...
Click to collapse
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Tyannt said:
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Click to expand...
Click to collapse
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
BWolf56 said:
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
Click to expand...
Click to collapse
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Tyannt said:
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Click to expand...
Click to collapse
I suggest you start with CM.
As for rooting, you can get it directly on the store now (was recently made legal). I believe it's by chainfire. But do you need it atm?
Also, all custom roms come pre-rooted.
Sent from my SGH-I747 using xda app-developers app