Related
I can't flash any earlier version. This is a model 1009 Captivate that came with JH7 out of the box.
Flashing to any earlier version will either brick the phone or cause a kernel panic on boot. I had to make and use a jig to get it back.
I searched the Captivate Android Development Forum and all I found were .zip files only flashable through ClockworkMod Recovery.
I really need to flash to stock. Please. Where can I find JH7 Odin?
Follow this guide, tell me how it goes:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
GGXtreme said:
Follow this guide, tell me how it goes:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Click to expand...
Click to collapse
I used this method on my 1010 and it worked beautifully. Wish there was a one click option, but really it's not that bad.
GGXtreme said:
Follow this guide, tell me how it goes:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Click to expand...
Click to collapse
Thank you so much. This worked! I am now running Darky 8 on my Cpativate Model 1009! Thanks!
Glad that it worked out
Actually in the process of flashing back to JH7 right now (exchanging my Captivate due to the random shutdown issue).
2.1 / 2.2 / old bootloaders.
I need them AND in an odin flashable tar.
not because i screwed my phone!
I need them for my Rogers stock rom thread!
now with odin 1.82 we can flash the boot loaders seprately (link in thread if needed)
so if i had them, i could ADD them to my stock rom thread . I would be able to have them flash the bootloaders then the rom.
as far as i can tell they are not in my stock roms already
thank you guys!
Check the thread for odin with the three button fix I'm pretty sure everything is broken up into individual pieces for flashing with odin and maybe what you want is in there.
Sent from my SAMSUNG-SGH-I897
1tontomato said:
Check the thread for odin with the three button fix I'm pretty sure everything is broken up into individual pieces for flashing with odin and maybe what you want is in there.
Sent from my SAMSUNG-SGH-I897
Click to expand...
Click to collapse
Don't think the 3 button odin had all the bootloaders.
Let me look around,i may be able to find s link. But it may take swhile, busy most of the day.
Sent from my GT-I9000 using XDA App
samfirmware.com
they have all the odin files
@ mr - 3 button doesnt, thats why ginger people must flash ODIN one click FIRST, then see if 3 button works, THEN flash 3button fix if needed. Only odin one click has bootloaders.... At the moment....
@ pirate - thank you for that but i wouldnt know what to look for inside the firmware. Im still learning, if i knew what i was looking for exactly, i would have it already.... LOL.
kinda why i was asking for help....
TRusselo said:
@ pirate - thank you for that but i wouldnt know what to look for inside the firmware. Im still learning, if i knew what i was looking for exactly, i would have it already.... LOL.
kinda why i was asking for help....
Click to expand...
Click to collapse
just redownloaded jh2, jh3, jh7 tar files. no boot loaders, but seems like every froyo i9000 rom has bootloaders in the tar files.
the files you are looking for are:
boot.bin
sbl.bin
nearly every one of designgears' roms has sbl.bin so you can pull that from the 3button fix or one of his roms.
according to another post by mccord, reposted from the i9000 forums, it looks like you need to flash a 2.2 froyo rom with bootloaders in order to recovery.
odin one click worked for mine, i just tested, but its also a model 1007, its never failed me
according to the continuum how-to (for one reference)
the 3button fix doenst have boot loaders and must flash one-click to snag it's bootloaders first.
and we all know we cant get them from one click
Ill keep looking myself but i would appreciate help as well
either way, once i have those 2 files, do i just tar them? or is there a proper way to package them to flash in odin "bootloader" box? (new feature in 1.81 and up). just like cwm zips need instruction meta data? or no? ive never done odin files.... or just tar them up and flash with pda box? or?
screw it lets find them first.....
TRusselo said:
according to the continuum how-to (for one reference)
the 3button fix doenst have boot loaders and must flash one-click to snag it's bootloaders first.
Click to expand...
Click to collapse
this is false. it contains the SECONDARY bootloader, but not the primary
you can also get the sbl.bin (the secondary bootloader) from AIO captivate toolbox
i am hunting down the boot.bin (primary) right now.
ahh... right... i was half wrong... i was tired last night.
but thanks man!
I bricked my Galaxy S, I was installing darkys 10.2 RE and it got stuck on NAND or something, so after a while a pulled the cord, now my galaxy S wont boot up, i can get to download mode. i tried flashing XXJVQ stock to it but nothing happens, theres no progress bar or anythink. WHAT DO I DO???
GalaxySN00B:0 said:
I bricked my Galaxy S, I was installing darkys 10.2 RE and it got stuck on NAND or something, so after a while a pulled the cord, now my galaxy S wont boot up, i can get to download mode. i tried flashing XXJVQ stock to it but nothing happens, theres no progress bar or anythink. WHAT DO I DO???
Click to expand...
Click to collapse
first, i think you need to use a jvq whit bootloaders. are you tried clean flash ?. three files whit repartition and pit file ?
Try another Odin if you aren't getting a progress bar. I recomend ezodin and it seems to work for some people. I had one version of odin that just never worked.
yeh i tried flashing a JVQ rom with the phone, CSC and PIT file but nothing happens :S how do i flash the booltloaders with it?
GalaxySN00B:0 said:
yeh i tried flashing a JVQ rom with the phone, CSC and PIT file but nothing happens :S how do i flash the booltloaders with it?
Click to expand...
Click to collapse
use the EZ method, search for EZBase / EZROM / EZOdin. (the EZROM contains all the bootloaders and everything you will need)
Very user friendly and really simple but soooo effective.
I dont know who the maker of it is, But if i did i would give him a huge thanks, he saved my ass many times
azzledazzle said:
use the EZ method, search for EZBase / EZROM / EZOdin. (the EZROM contains all the bootloaders and everything you will need)
Very user friendly and really simple but soooo effective.
I dont know who the maker of it is, But if i did i would give him a huge thanks, he saved my ass many times
Click to expand...
Click to collapse
+1 it is Nitr8s work, another superb lifesaver from the maestro
GalaxySN00B:0 said:
yeh i tried flashing a JVQ rom with the phone, CSC and PIT file but nothing happens :S how do i flash the booltloaders with it?
Click to expand...
Click to collapse
Well, are you sure you used Odin 1.3 (that's the one who always worked for me, even on windows 7 64 bits), run it in administrator mode (not sure if it helps), and saw that your SGS was connected in Odin when you plug it in ?
I was using odin 1.85
azzledazzle said:
use the EZ method, search for EZBase / EZROM / EZOdin. (the EZROM contains all the bootloaders and everything you will need)
Very user friendly and really simple but soooo effective.
I dont know who the maker of it is, But if i did i would give him a huge thanks, he saved my ass many times
Click to expand...
Click to collapse
sorry, could you give me a link to it, everytime i type it in it keeps coming up with different custom roms. sorry for the inconvience.
Here's a link. Not sure if there's a newer version (just had this one handy, in a bit of a rush). It'll unbrick your phone anyway
thanks it worked you just saved me alot of money my friend
Wow, thanks for telling about EZOdin. This is really the thing I need
GalaxySN00B:0 said:
I was using odin 1.85
Click to expand...
Click to collapse
Well, glad you succeeded with ezodin...
But just to let you know, I think that it didn't work because you used odin 1.85.
Same problem happened to me one time with 1.85 (not recognizing my phone) so I came back to 1.3.
Odin 1.3 always works with firmwares from samfirmware.com
Hi,
can someone please post a link to download Odin 1 click for captivate 2.2?
(the one in mobiletechvideos site is dead cos its megaupload)
thanks
ap1618 said:
Hi,
can someone please post a link to download Odin 1 click for captivate 2.2?
(the one in mobiletechvideos site is dead cos its megaupload)
thanks
Click to expand...
Click to collapse
Here is the link to the Heimdall One-click for 2.2
It was found in the sticky for the OneClicks master collection in the Development Section.
Red_81 said:
Here is the link to the Heimdall One-click for 2.2
It was found in the sticky for the OneClicks master collection in the Development Section.
Click to expand...
Click to collapse
I saw this one right after I posted this question... but never used Heimdall... Is it the same as Odin, and safe?
after going to stock, can I flash gingie bootloaders etc using Odin?
thanks
ap1618 said:
I saw this one right after I posted this question... but never used Heimdall... Is it the same as Odin, and safe?
after going to stock, can I flash gingie bootloaders etc using Odin?
thanks
Click to expand...
Click to collapse
It's functionally the same as Odin, just an open source alternative. You can do everything that you can do with Odin.
Its annoying to get work on windows though. IMO atleast.
prbassplayer said:
Its annoying to get work on windows though. IMO atleast.
Click to expand...
Click to collapse
The drivers are a bit wonky, for sure. They only install for one USB port, so then you need to remember which one works every time you flash. I've had mixed results, mostly due to my complete lack of patience and my familiarity with Odin. I just don't want to be the "Just use Odin" guy
Na man I get it
Sent from my ICS powered Captivate using Tapatalk
I want to go to stock 2.2 so that I can install GB... but the Heimdall one says it doesnt wipe user apps... would it be a problem when upgrading to GB bootloaders and then upgrading the ROM?
thanks
prbassplayer said:
Its annoying to get work on windows though. IMO atleast.
Click to expand...
Click to collapse
windows is the only thing that will run on my pc.. Ubuntu HATES my pc.
ap1618 said:
I want to go to stock 2.2 so that I can install GB... but the Heimdall one says it doesnt wipe user apps... would it be a problem when upgrading to GB bootloaders and then upgrading the ROM?
thanks
Click to expand...
Click to collapse
If your upgrading through kies to kk4 official, it takes care of everything for you. It has bootloaders in it, no need to flash separately. As for user apps, why would you WANT to wipe your apps? I've went from jf6 to kb1 to kk4 with kies and never lost an app. And I was rooted when I went to kb1
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Tyannt said:
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Click to expand...
Click to collapse
They both work. Just make sure you get the right version.
BWolf56 said:
They both work. Just make sure you get the right version.
Click to expand...
Click to collapse
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Tyannt said:
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Click to expand...
Click to collapse
TiBu is my personal fav.
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Tyannt said:
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Click to expand...
Click to collapse
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Tyannt said:
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Click to expand...
Click to collapse
First thing: don't use kies at all!
There are no JB bootloaders for the cappy, just eclair, froyo and GB. If the ROM is a port, you'll most likely have to flash the I9000 gb bootloaders but I'd suggest finding another ROM to start with (like CM). Playing with bootloaders is the only thing that will make your phone a paper weight if something goes wrong.
Also, bootloaders aren't included in roms for safety measures. That being said, you can run ICS and JB roms just fine with the GB bootloaders.
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
Sent from my SGH-I747 using xda app-developers app
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Tyannt said:
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Click to expand...
Click to collapse
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
BWolf56 said:
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
Click to expand...
Click to collapse
--------------------------------------------------
* I haven't knowingly flashed GB bootloaders.
* I've been all over the link you provided... no working downloads.
Hmmm, I did try "Odin" a couple of times to get the GingerBread update...After doing that my phone now
boots to the AT&T logo, goes black for a sec and a screen like a bad tv signal comes up! Also, the phone
is now charging and showing the big battery icon! I seem to recall reading somewhere that if that happens
it may be wrong bootloaders? Can't remember exactly what it said but am I correct thinking it was one of
your own replies to another member?
Anyway, done for the night Grrrr
Thanks so much!
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
4-2ndtwin said:
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Tyannt said:
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Click to expand...
Click to collapse
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
BWolf56 said:
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
Click to expand...
Click to collapse
Hey there!
* 4-2ndtwin chimed in and said he would post when he uploaded them.
Been looking in the meantime.
* I have both Odin versions, now understand that I can use Odin to flash any file I choose, such as the Corn kernal, not just files it may come with.
* I downloaded a "Stocki897uckk4-zImage.tar, unzipping shows "zImage" file but I
haven't touched it.
Just hanging in for a working link for the Odin KK4 One-Click I guess...
Question!!!
For clarification..Odin KK4 One-Click is just bootloaders, kernal and maybe modem, right? It's not going to give me a working ROM...OR, is it ALSO an alternative way to flash a ROM when I can't add a ROM zip to my phone thru my PC to flash?
Lol... I'll get a handle on this, more of a visual type
As usual, appreciate the help!
Stock KK4 Links up.
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
4-2ndtwin said:
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
Click to expand...
Click to collapse
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Tyannt said:
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Click to expand...
Click to collapse
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
BWolf56 said:
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
Click to expand...
Click to collapse
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Tyannt said:
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Click to expand...
Click to collapse
I suggest you start with CM.
As for rooting, you can get it directly on the store now (was recently made legal). I believe it's by chainfire. But do you need it atm?
Also, all custom roms come pre-rooted.
Sent from my SGH-I747 using xda app-developers app