Hello,
I have a KDZ file of my cellular company.
A few minutes ago I tried to flash it via KDZU and R&D Test tool with no luck,
I got LG update window instead of flashing window, and then I saw the post with SmartFlash Tool.
How can I flash the KDZ of my specific cellular company using SmartFlash Tool? (I don't understand what are the .bin & .fls. files)
Thanks!
ohadz said:
Hello,
I have a KDZ file of my cellular company.
A few minutes ago I tried to flash it via KDZU and R&D Test tool with no luck,
I got LG update window instead of flashing window, and then I saw the post with SmartFlash Tool.
How can I flash the KDZ of my specific cellular company using SmartFlash Tool? (I don't understand what are the .bin & .fls. files)
Thanks!
Click to expand...
Click to collapse
Not at all, but there seems to be a work around, but I cant find the link right now, maybe anyone else can provide it, I think it was somewhere in the P920 section.
N00BY0815 said:
Not at all, but there seems to be a work around, but I cant find the link right now, maybe anyone else can provide it, I think it was somewhere in the P920 section.
Click to expand...
Click to collapse
Here is the workaround:
http://forum.xda-developers.com/showthread.php?t=1473781
I'm going to test it
Thanks
Update:
Awesome!! It works!!
Related
VS910ZV9_05.S9_05.P58014.R5.tot​
how use this frimware been waiting too root it u never know jcase
Holy crap... where did you get this?
This can't be real...
I'm confused what exactly is this?
nasirahmed said:
VS910ZV4_04.S4_04.P58008.R5.user.tot​
Click to expand...
Click to collapse
One million internets to you, sir(or madam)...
Sent from my VS910 4G using Tapatalk
is this so we can get developers to make a custom recovery??????????
it is supposed to be the stock firmware for the revolution which would allow you to flash your system back to stock.
I have scanned the file and there are 3 files contained inside. I have not been able to extract them however. There are 3 img files inside which tally some 700+ meg.
Haxcid said:
it is supposed to be the stock firmware for the revolution which would allow you to flash your system back to stock.
I have scanned the file and there are 3 files contained inside. I have not been able to extract them however. There are 3 img files inside which tally some 700+ meg.
Click to expand...
Click to collapse
I have not found a way to extract the embedded files either. This is used with a Verizon only tool that is readily available. I wouldn't recommend flashing this unless you brick or destroy your phone (as a last result).
how u flash this
blkhwk5177 said:
how u flash this
Click to expand...
Click to collapse
It's a program called: LGNPST. You can Google it and you will find a few download locations.
I looked everywhere to find out how to load this, can somebody with lg experience point me in the right direction. im coming from a droid x, i would just sbf to restore a phone; that was easy
LGPNST does not support this device yet that I know of.
Verizon has a tool as well but I don't think it works with TOT files.
Haxcid said:
LGPNST does not support this device yet that I know of.
Verizon has a tool as well but I don't think it works with TOT files.
Click to expand...
Click to collapse
Yeah, you have to have the proper DLL, and we haven't found it yet. Cubed said he'd have a stock ROM out here shortly.
After that, he plans to deodex and release a cleaned version of stock (debinged)
majorpay said:
Yeah, you have to have the proper DLL, and we haven't found it yet. Cubed said he'd have a stock ROM out here shortly.
After that, he plans to deodex and release a cleaned version of stock (debinged)
Click to expand...
Click to collapse
I'm really looking forward to de-binged, de-odexd etc. Rom!!!
Hi,
this is the factory soft provided by LG to update VS910.
[LGDP2V42]only_VS910_20110430_download
but this soft need a protection dongle (need to be attached to PC) to run. LG Service Centers have this. It will be intersting if someone can find something useful from it.
I don't know if it works or not but...
http://www.mobile-files.com/forum/showthread.php/1384-How-load-TOT-file-with-LGNPST-LAB.1.2
So i guess in LGNPST, you just click browse, then put *.* in file name, hit enter, then select your .tot.
The problem isnt getting the software its the fact that unlike motorola the lg program requires a device specific .dll file so without that file the flash software and firmware are really of no use
Sent from my rooted and de-Bing-ed LG Revolution
vs910 dll for npst
here is the dll u need to flash this firmware... as far as firmware u should be able to flash with npst lab version. u need to register dll first
lazarus2297 said:
The problem isnt getting the software its the fact that unlike motorola the lg program requires a device specific .dll file so without that file the flash software and firmware are really of no use
Sent from my rooted and de-Bing-ed LG Revolution
Click to expand...
Click to collapse
give me the link for the lab installer and the rest of the steps
Hi,
I have dried downgrading my su660 using the , but it hangup.
I am curious and can't find on how to install this rom
http://forum.xda-developers.com/showthread.php?t=942830&highlight=su660
How Can I install it?
What tools do i need?
Thanks,
Thomie
You need SmartFlash to install them.
tjsas1 said:
Hi,
I have dried downgrading my su660 using the , but it hangup.
I am curious and can't find on how to install this rom
http://forum.xda-developers.com/showthread.php?t=942830&highlight=su660
How Can I install it?
What tools do i need?
Thanks,
Thomie
Click to expand...
Click to collapse
What's your firmware version?
If it is v10w or before, you can flash that with smartflash.
But if it's v20f, first you have to reset with nvflash then flash with smartflash.
And smartflash will wipe your data.
Can you give the code I need to type. Because I can't find a documentation of nvflash that I can read without jargons.
Please......
Thanks
You really helped me.
As is written on Optimus 3d P920 developement section, they found a new way to make KDZ work again
http://forum.xda-developers.com/showthread.php?t=1473781
I've tested this on my otpimus black and it worked.
Now I have the fw 20n, while before i had the 20b.
Hope this could be helpful for someone
skapez said:
As is written on Optimus 3d P920 developement section, they found a new way to make KDZ work again
http://forum.xda-developers.com/showthread.php?t=1473781
I've tested this on my otpimus black and it worked.
Now I have the fw 20n, while before i had the 20b.
Hope this could be helpful for someone
Click to expand...
Click to collapse
thanks ...its good 2 peek into other forums
Translating through google translator.
I have a folder c: shttps \ www \ empty. Fixed hosts, run kdz says no internet connection. Requests to register in the program fee?
There are some cases obtaining a root Unlock Root, all of them updated to 2.2.2 to 2.3.4 or through kdz, or via the Internet. At the same time to have 2.2.2 Root, will not normally be dumped data (wipe), then through the Unlock Root, Root received. That's what I'm trying to flash through SmartFlashTool_External to 2.2.2, stuck updated through kdz.
No, you don't have to register, and the ..\www folder shouldn't be empy.
In that folder you have to unpack the file you found in the original thread (on the bottom of the first post you found 2 files, one is the program shttps.zip and the other is ww.zip).
About the root, i don't know.
skapez said:
No, you don't have to register, and the ..\www folder shouldn't be empy.
In that folder you have to unpack the file you found in the original thread (on the bottom of the first post you found 2 files, one is the program shttps.zip and the other is ww.zip).
About the root, i don't know.
Click to expand...
Click to collapse
Thank you very much happened. But the root did not work. But move on to GERMANY.LGP970.V20N_00.kdz
Eh so I'm quite new The Optimus Black (I just got it on last Saturday!!)
I really like the phone! And I was trying to update to Gingerbread but it tells me that it's already up to date (though it's obviously on Froyo 2.2.2)
So I started to search on the internet how to flash GB manually but in vain...
It's not working...
I tried with both R&D test tool and KDZ Updater...
I followed this Guide: http://www.lg-phones.org/how-to-update-lg-optimus-black-to-android-2-3-4-gingerbread.html
But it's not working...
I doesn't show me the window to select Language & Country but this one (see attachment):
Please help.. Oh btw, could you recommend me what custom rom to install??
Thanks!!
The latest LG mobile tool won`t let you do the update with KDZ or R&D.
Follow this thread http://forum.xda-developers.com/showthread.php?t=1480392 to flash a rooted rom in binary format with SmartFlash software.
punktnet said:
The latest LG mobile tool won`t let you do the update with KDZ or R&D.
Follow this thread http://forum.xda-developers.com/showthread.php?t=1480392 to flash a rooted rom in binary format with SmartFlash software.
Click to expand...
Click to collapse
Thank you!! Ill try this tomorrow
Thread moved
Questions do not belong in Development, they belong in Q&A.
punktnet said:
The latest LG mobile tool won`t let you do the update with KDZ or R&D.
Follow this thread http://forum.xda-developers.com/showthread.php?t=1480392 to flash a rooted rom in binary format with SmartFlash software.
Click to expand...
Click to collapse
It was successful but I'm on a bootloop what can i do?
EDIT: Retried the procedure and bootloop fixed!
WIIstpM said:
It was successful but I'm on a bootloop what can i do?
Click to expand...
Click to collapse
Do the procedure again from the very begining. Power off.. press volume + ...and so on.
Just reflash it, with the same tool, redownload the files, since they might be corrupted. And check if you chose them in the right order otherwise the bootloop is guaranteed
It is possible to convert the KDZ file to BIN/FLS, so I can flash my 2X with Smartflash ( using this http://forum.xda-developers.com/showthread.php?t=1692191 )? I'm talking about the original 30A.
And if yes, explain me how to do the conversion, because from the original post I don't understand really well, please.
Best regards,
rashn.
rashn said:
It is possible to convert the KDZ file to BIN/FLS, so I can flash my 2X with Smartflash ( using this http://forum.xda-developers.com/showthread.php?t=1692191 )? I'm talking about the original 30A.
And if yes, explain me how to do the conversion, because from the original post I don't understand really well, please.
Best regards,
rashn.
Click to expand...
Click to collapse
Yes it is working!
Though it is stated that it does not work, it works withe the 30A ICS release.
Ive done it, converted it and flashed and it is working.
you download the Converter
http://forum.xda-developers.com/showthread.php?t=1692191
and the kdz.
http://csmg.lgmobile.com/swdata/WEBSW/LGP990/ANEUDW/V30a_00/V30A_00.kdz
you put the kdz in the same folder, and start converter
pres 1
wait
DO NOT patch the bin file
enter the new folder
use the files with smartflash.
Habar_nam said:
Yes nit is working!
Though it is stated that it does not work, it works withe the 30A ICS release.
Ive done it, converted it and flashed and it is working.
you download the Converter
http://forum.xda-developers.com/showthread.php?t=1692191
and the kdz.
http://csmg.lgmobile.com/swdata/WEBSW/LGP990/ANEUDW/V30a_00/V30A_00.kdz
you put the kdz in the same folder, and start converter
pres 1
wait
do NOT patch the bin file
enter the new folder
use the files with smartflash.
Click to expand...
Click to collapse
Thank you really much! That really helped a lot bro, thanks for taking your time to make pictures and to explain extremely well for a noob like me!