As is written on Optimus 3d P920 developement section, they found a new way to make KDZ work again
http://forum.xda-developers.com/showthread.php?t=1473781
I've tested this on my otpimus black and it worked.
Now I have the fw 20n, while before i had the 20b.
Hope this could be helpful for someone
skapez said:
As is written on Optimus 3d P920 developement section, they found a new way to make KDZ work again
http://forum.xda-developers.com/showthread.php?t=1473781
I've tested this on my otpimus black and it worked.
Now I have the fw 20n, while before i had the 20b.
Hope this could be helpful for someone
Click to expand...
Click to collapse
thanks ...its good 2 peek into other forums
Translating through google translator.
I have a folder c: shttps \ www \ empty. Fixed hosts, run kdz says no internet connection. Requests to register in the program fee?
There are some cases obtaining a root Unlock Root, all of them updated to 2.2.2 to 2.3.4 or through kdz, or via the Internet. At the same time to have 2.2.2 Root, will not normally be dumped data (wipe), then through the Unlock Root, Root received. That's what I'm trying to flash through SmartFlashTool_External to 2.2.2, stuck updated through kdz.
No, you don't have to register, and the ..\www folder shouldn't be empy.
In that folder you have to unpack the file you found in the original thread (on the bottom of the first post you found 2 files, one is the program shttps.zip and the other is ww.zip).
About the root, i don't know.
skapez said:
No, you don't have to register, and the ..\www folder shouldn't be empy.
In that folder you have to unpack the file you found in the original thread (on the bottom of the first post you found 2 files, one is the program shttps.zip and the other is ww.zip).
About the root, i don't know.
Click to expand...
Click to collapse
Thank you very much happened. But the root did not work. But move on to GERMANY.LGP970.V20N_00.kdz
Related
VS910ZV9_05.S9_05.P58014.R5.tot
how use this frimware been waiting too root it u never know jcase
Holy crap... where did you get this?
This can't be real...
I'm confused what exactly is this?
nasirahmed said:
VS910ZV4_04.S4_04.P58008.R5.user.tot
Click to expand...
Click to collapse
One million internets to you, sir(or madam)...
Sent from my VS910 4G using Tapatalk
is this so we can get developers to make a custom recovery??????????
it is supposed to be the stock firmware for the revolution which would allow you to flash your system back to stock.
I have scanned the file and there are 3 files contained inside. I have not been able to extract them however. There are 3 img files inside which tally some 700+ meg.
Haxcid said:
it is supposed to be the stock firmware for the revolution which would allow you to flash your system back to stock.
I have scanned the file and there are 3 files contained inside. I have not been able to extract them however. There are 3 img files inside which tally some 700+ meg.
Click to expand...
Click to collapse
I have not found a way to extract the embedded files either. This is used with a Verizon only tool that is readily available. I wouldn't recommend flashing this unless you brick or destroy your phone (as a last result).
how u flash this
blkhwk5177 said:
how u flash this
Click to expand...
Click to collapse
It's a program called: LGNPST. You can Google it and you will find a few download locations.
I looked everywhere to find out how to load this, can somebody with lg experience point me in the right direction. im coming from a droid x, i would just sbf to restore a phone; that was easy
LGPNST does not support this device yet that I know of.
Verizon has a tool as well but I don't think it works with TOT files.
Haxcid said:
LGPNST does not support this device yet that I know of.
Verizon has a tool as well but I don't think it works with TOT files.
Click to expand...
Click to collapse
Yeah, you have to have the proper DLL, and we haven't found it yet. Cubed said he'd have a stock ROM out here shortly.
After that, he plans to deodex and release a cleaned version of stock (debinged)
majorpay said:
Yeah, you have to have the proper DLL, and we haven't found it yet. Cubed said he'd have a stock ROM out here shortly.
After that, he plans to deodex and release a cleaned version of stock (debinged)
Click to expand...
Click to collapse
I'm really looking forward to de-binged, de-odexd etc. Rom!!!
Hi,
this is the factory soft provided by LG to update VS910.
[LGDP2V42]only_VS910_20110430_download
but this soft need a protection dongle (need to be attached to PC) to run. LG Service Centers have this. It will be intersting if someone can find something useful from it.
I don't know if it works or not but...
http://www.mobile-files.com/forum/showthread.php/1384-How-load-TOT-file-with-LGNPST-LAB.1.2
So i guess in LGNPST, you just click browse, then put *.* in file name, hit enter, then select your .tot.
The problem isnt getting the software its the fact that unlike motorola the lg program requires a device specific .dll file so without that file the flash software and firmware are really of no use
Sent from my rooted and de-Bing-ed LG Revolution
vs910 dll for npst
here is the dll u need to flash this firmware... as far as firmware u should be able to flash with npst lab version. u need to register dll first
lazarus2297 said:
The problem isnt getting the software its the fact that unlike motorola the lg program requires a device specific .dll file so without that file the flash software and firmware are really of no use
Sent from my rooted and de-Bing-ed LG Revolution
Click to expand...
Click to collapse
give me the link for the lab installer and the rest of the steps
Hello,
I have a KDZ file of my cellular company.
A few minutes ago I tried to flash it via KDZU and R&D Test tool with no luck,
I got LG update window instead of flashing window, and then I saw the post with SmartFlash Tool.
How can I flash the KDZ of my specific cellular company using SmartFlash Tool? (I don't understand what are the .bin & .fls. files)
Thanks!
ohadz said:
Hello,
I have a KDZ file of my cellular company.
A few minutes ago I tried to flash it via KDZU and R&D Test tool with no luck,
I got LG update window instead of flashing window, and then I saw the post with SmartFlash Tool.
How can I flash the KDZ of my specific cellular company using SmartFlash Tool? (I don't understand what are the .bin & .fls. files)
Thanks!
Click to expand...
Click to collapse
Not at all, but there seems to be a work around, but I cant find the link right now, maybe anyone else can provide it, I think it was somewhere in the P920 section.
N00BY0815 said:
Not at all, but there seems to be a work around, but I cant find the link right now, maybe anyone else can provide it, I think it was somewhere in the P920 section.
Click to expand...
Click to collapse
Here is the workaround:
http://forum.xda-developers.com/showthread.php?t=1473781
I'm going to test it
Thanks
Update:
Awesome!! It works!!
A successful root method from chinese forum!
from: http://bbs.gfan.com/android-3604178-1-1.html
The only root method so far, is to exchange the recovery in v20B and install root tools through recovery.
step 1) copy Superuser.zip to the root directory in SD card.
step 2) shut down your OB, take out the battery, press volume + and plug the USB cable (which means enter the S/W mode)
Step 3) extract LGP970.7z and obtain v20.bin and v20v.fls files.
step 4) open B_SmartFlashTool_Extern.exe and select:
ROM copy D/L
cp:V20B.fls
ap:V20B.bin
select mode:normal mode
step 5) click start button to start flashing, all data in OB(sms, contacts, game records) won't be lossed.
After flash procedures, you will come to the recovery interface, then, select install zip from SDcard and choose the superuser.zip that you place before.
Reboot and you got the rooted 2.3.4
All files(superuser, LGP970.7z ) can be downloaded from here:
http://115.com/file/cl3smym3
(for someone who don't know chinese:
after you get into the site, you will see 3 color buttons at the middle
green, blue and red, the download link(grey button) is at the right of the red button)
We already know that...
Check this out http://forum.xda-developers.com/showthread.php?t=1480392&page=11
or first page: http://forum.xda-developers.com/showthread.php?t=1480392
N00BY0815 said:
We already know that...
Check this out http://forum.xda-developers.com/showthread.php?t=1480392&page=11
or first page: http://forum.xda-developers.com/showthread.php?t=1480392
Click to expand...
Click to collapse
Is the v20B in the teaching post using Hong Kong version?
exe127 said:
Is the v20B in the teaching post using Hong Kong version?
Click to expand...
Click to collapse
No, as written in the threads linked by N00BY.
Please read before you post.
Nor the rooted V20b uploaded to the Chinese forum the Hong Kong stock ROM, as reported by some in their replies.
The "new" method posted on the Chinese forum is actually the one posted by SnegovikRZN on xda.
But the poster didn't give proper credit to the source.
The only thing you need, is ubuntu or other linux distributions, the bin files of your firmware (u can get em like this: http://csmg.lgmobile.com:9002/csmg/b2c/client/cs_auth_model_check.jsp?esn=imei) replace IMEI, btw.
And this guide: http://forum.xda-developers.com/showpost.php?p=22329293&postcount=106
noranyan said:
No, as written in the threads linked by N00BY.
Please read before you post.
Nor the rooted V20b uploaded to the Chinese forum the Hong Kong stock ROM, as reported by some in their replies.
The "new" method posted on the Chinese forum is actually the one posted by SnegovikRZN on xda.
But the poster didn't give proper credit to the source.
Click to expand...
Click to collapse
Because the one post in xda is using v20B which is equally to the HongKong OB stock rom = v20B, so my question is , is that v20B is the HK's v20B ?
exe127 said:
Because the one post in xda is using v20B which is equally to the HongKong OB stock rom = v20B, so my question is , is that v20B is the HK's v20B ?
Click to expand...
Click to collapse
IT DOESNT MATTER which one it is, just download the bin file YOU need, and follow the guide then. Ask in the thread, which version it is. I cant answer this to you, since I am using a N version of GB. I already gave you the link, of how to get the right BIN files, via your IMEI, and if you couldnt get the official update yet, ask another one about it. Or simply try the ROM. It is rooted, so you can enter CWM quickly and also restore the previous version, if needed.
N00BY0815 said:
IT DOESNT MATTER which one it is, just download the bin file YOU need, and follow the guide then. Ask in the thread, which version it is. I cant answer this to you, since I am using a N version of GB. I already gave you the link, of how to get the right BIN files, via your IMEI, and if you couldnt get the official update yet, ask another one about it. Or simply try the ROM. It is rooted, so you can enter CWM quickly and also restore the previous version, if needed.
Click to expand...
Click to collapse
Thank you for your link, I get this sw_url:
but how can I download it?
I copy it to my browser but nothing appear. Thanks for your help
<sw_url>http://csmg.lgmobile.com:9002/ezls/MESSW/LGP970/HKG/SWP/3/BIN_LGP970AT-00-V20b-454-XXX-DEC-31-2011+0.zip</sw_url>
</cs_auth_model_check>
</response>
The request for the zip file that you get when making the request with a German IMEI always return a 404 (not found). I wonder where has the user SnegovikRZN taken them from.
Ok, sorry then, I thought LG already released the bin files. I've been wrong there it seems.
Idk where he got em from. Maybe ask him via PM or in his thread.
N00BY0815 said:
Ok, sorry then, I thought LG already released the bin files. I've been wrong there it seems.
Idk where he got em from. Maybe ask him via PM or in his thread.
Click to expand...
Click to collapse
if I get the file from this:
http://csmg.lgmobile.com:9002/ezls/...IN_LGP970AT-00-V20b-454-XXX-DEC-31-2011+0.zip
Is that I can directly flash the bin file(extract from the above link) by smartflash?
Yes, you can flash the with Smart Flash, just as described here: http://forum.xda-developers.com/showpost.php?p=22304591&postcount=91 (of course by replacing the names of the fls/bin file with your own).
I would have one request from you, I am not able to download that zip from LG, but if you can, can you please share it somewhere ? I would like to have that in case that i have to bring the telephone back to the shop for warranty - it's a "just in case" scenario .
Dan
ok, if I can get the zip file from LG, I will post here
ok, I will post it if I know how to download the zip from LG
before I start I must say thanks to mircea89fzr for providing the tutorial
http://forum.xda-developers.com/showthread.php?t=2409308
I made a noob friendly tool to flash kdz files. Auto changes hosts file, guides you threw the process step by step.
Download and Extract the zip
run the Auto Flash.exe
go threw the prompts
at the end of the flash it will ask you if you would like to root, if you would like to click yes.
it will then ask you if you want to debloat, if you do click yes.
http://www.slipsystem.co.za/downloads/autoflash/
its late so I will leave the explanations for tomorrow but its pretty self explanatory.
slipsystem said:
I made a noob friendly tool to flash kdz files.
Click to expand...
Click to collapse
Is it only for l5 II?
What about the root after flash,and if i flash a rooted kdz?
is it able to unlock bootloader of install CWM?
Thanx a lot!!
AXD96 said:
Is it only for l5 II?
What about the root after flash,and if i flash a rooted kdz?
is it able to unlock bootloader of install CWM?
Click to expand...
Click to collapse
the flash tool automates this process
http://forum.xda-developers.com/showthread.php?t=2409308
if you flash your phone in the same way then it might work.
the root after flash uses a Chinese tool called vroot to root the phone. if you flash a rooted kdz then your phone is pre rooted is it not? it is not able to unlock your bootloader as we are still figuring out how to unlock the bootloader of the l5 II nor can it install CWM for the same reason.
would you like a multi purpose tool like that?
I can write a beta script that will gives you options to do these things, like the image attached. I will write it for you but you must test it out as I dont have A L5 e610.
toni155 said:
Thanx a lot!!
Click to expand...
Click to collapse
Im glad you like it. I wrote it for you!!!
If you ask for help you will receive
slipsystem said:
the flash tool automates this process
http://forum.xda-developers.com/showthread.php?t=2409308
if you flash your phone in the same way then it might work.
the root after flash uses a Chinese tool called vroot to root the phone. if you flash a rooted kdz then your phone is pre rooted is it not? it is not able to unlock your bootloader as we are still figuring out how to unlock the bootloader of the l5 II nor can it install CWM for the same reason.
would you like a multi purpose tool like that?
I can write a beta script that will gives you options to do these things, like the image attached. I will write it for you but you must test it out as I dont have A L5 e610.
Click to expand...
Click to collapse
why do you use a "chinese" software that probably you dont understand
a software that exploit some android bug can be very dangerous, it will not destroy your smartphone but it can steal personal data or open new exploit for malware
why you dont use this software http://www.cydiaimpactor.com/ made by saurik, the creator of cydia, i hope you know about ios jailbreak:good:
AXD96 said:
why do you use a "chinese" software that probably you dont understand
a software that exploit some android bug can be very dangerous, it will not destroy your smartphone but it can steal personal data or open new exploit for malware
why you dont use this software http://www.cydiaimpactor.com/ made by saurik, the creator of cydia, i hope you know about ios jailbreak:good:
Click to expand...
Click to collapse
I only used the chinese root because that was the only way to root. I then remove it and install supersu. Thanks for the link i will definatly give it a shot when i fully reset my phone again.
Download link is not working
0ptimus82 said:
Download link is not working
Click to expand...
Click to collapse
Sorry man my service provider emailed me to say thatmy website is using to much bandqidth. I find it difficult to maintain all the tools i write. If ypu relly want this i can go threw my archives and find it again, then upload ittodropbox for you.
slipsystem said:
Sorry man my service provider emailed me to say thatmy website is using to much bandqidth. I find it difficult to maintain all the tools i write. If ypu relly want this i can go threw my archives and find it again, then upload ittodropbox for you.
Click to expand...
Click to collapse
Thanks, I managed to download the files by using a public server to access your web page.
Once I open the tool I push "Debloat", the download window shows up but it never gets to 100%, I assume It´s happening becase the additional files are hosted in your site as well. I´d appreciate if you could share a full pack including the additional files.
Do all the utilities in "Multi Tool" and "L5 II TweakBox" work with my LG L5II E450g?
I´m also trying to find the way to change the boot animation (it´s the opperator logo), is there any way to make it?
Thanks for your support.
0ptimus82 said:
Thanks, I managed to download the files by using a public server to access your web page.
Once I open the tool I push "Debloat", the download window shows up but it never gets to 100%, I assume It´s happening becase the additional files are hosted in your site as well. I´d appreciate if you could share a full pack including the additional files.
Do all the utilities in "Multi Tool" and "L5 II TweakBox" work with my LG L5II E450g?
I´m also trying to find the way to change the boot animation (it´s the opperator logo), is there any way to make it?
Thanks for your support.
Click to expand...
Click to collapse
Ok I will see what I can do. I will make a few tweaks as you cant root the latest firmware using impactor.
Yes and no you can change the bootanimation.
you can change the animation but not the logo in the beginning as that is embeded in the bootloader if Im not mistaken.
this may be worth looking at
http://forum.xda-developers.com/showthread.php?t=2650588&page=3
slipsystem said:
Ok I will see what I can do. I will make a few tweaks as you cant root the latest firmware using impactor.
Yes and no you can change the bootanimation.
you can change the animation but not the logo in the beginning as that is embeded in the bootloader if Im not mistaken.
this may be worth looking at
http://forum.xda-developers.com/showthread.php?t=2650588&page=3
Click to expand...
Click to collapse
Thanks, I was able to manually debloat the ROM with the list in this link and using root explorer.
It´s a shame that it´s not possible to change the opperator logo,
Well, another device, another round of TOT files that I need to pull.
NOTE: As of posting there is no known way to flash this yet. I know others are working on this so will go ahead and post this.
That way when it's ready, this isn't holding it up.
By the way, any future releases will be mirrored on Rwilco12.com.
I thought we were hitting space issues and that does not appear to be the case.
Link to TOT: http://rwilco12.com/downloads.php?dir=Files/Devices/LG G5 (Sprint) (LS992)/Stock ROMs/ZV3
Any questions please ask.
Thank you for this! Hey... Its a start
Sent from my LGLS992 using Tapatalk
Awesome! Thank you!
Does anyone know what the dialer code is to get into the engineering menu. I only ask here because I read that on the G4 there was an option to flash from the sd card. Maybe that is where they hid that ability on the G5. This is my first Lg so please excuse me if my information is not correct.
Sent from my LGLS992 using Tapatalk
thank you very much
Hello,
As far as flashing the tot file, could we not do it using the LG flash tool?
I haven't messed with the flash tool since the G3 days so kindly refresh my memory.
thanks
---------- Post added at 12:35 AM ---------- Previous post was at 12:22 AM ----------
bdsullivan said:
Does anyone know what the dialer code is to get into the engineering menu. I only ask here because I read that on the G4 there was an option to flash from the sd card. Maybe that is where they hid that ability on the G5. This is my first Lg so please excuse me if my information is not correct.
Sent from my LGLS992 using Tapatalk
Click to expand...
Click to collapse
Hello, here "http://forum.xda-developers.com/showthread.php?t=737594 " is a list of epst codes A.k.A ## codes.
I know some of theses work with the LG.. my favorite is the "##3282##" hopefully you can find the one you need in the forum there.
As for the flashing a rom from sd card .. in the stock recovery there is the option to "apply update from SD Card"
As a disclaimer i am not responsible for what happens to your phone for using the above info..use it at your own risk....i know i do!
garwynn said:
Well, another device, another round of TOT files that I need to pull.
NOTE: As of posting there is no known way to flash this yet. I know others are working on this so will go ahead and post this.
That way when it's ready, this isn't holding it up.
By the way, any future releases will be mirrored on Rwilco12.com.
I thought we were hitting space issues and that does not appear to be the case.
Link to TOT: http://rwilco12.com/downloads.php?dir=Files/Devices/LG G5 (Sprint) (LS992)/Stock ROMs/ZV3
Any questions please ask.
Click to expand...
Click to collapse
Just released! http://forum.xda-developers.com/lg-g5/development/megalock-dll-lg-flash-tool-2-0-1-6-t3367222
YAY!!!!! now we just need the dll for our phone to get it to work right. and a way to properly extract the files out of the .tot file
Well I have good news. I got LGup to flash the your .tot file, Garwynn. a bit of a headache but it worked. I'll be posting my work here and a few other places. Here's how:
1. Install LG flash tool from ieatacid from here and make sure you can open it with no issues and see where you can choose the .dll for whatever phone you have (this isn't the program needed but the program needed needs a few of the dlls from it).
2. Install the LGbridge setup from here and let it update. Need this for the proper drivers. while it is installing DO NOT have phone plugged into USB port or it will warn ya.
3. install the LG up lab framework 1.11 and the LGH850_DLL file from here
4. Download and extract the LGUP.zip file from here
5. Install the .reg file and put the LS992 folder in the LG Electronics\LGUP\model folder which will be either in C:\Program Files or C:\Program Files (x86) depending on whether you have a 32 or 64 bit windows installed
6. Put phone in download mode ( Phone off, vol up while plugging in usb from PC), start LGUP
7. Make sure you see a com # and phone model and at the bottom where it says BIN, select it, at which point you should see 3 dot on the right, select it and choose the .tot file listed above, then hit start and wait for the magic.
I give creds to autoprime for his good work, garwynn for the .tot file, and ieatacid for his LGFlashtool. and if I missed anyone, I am giving you credits and apologizing for not mentioning you
My show up unknown any advice thanks
Sent from my LG-H830 using XDA-Developers mobile app
hi, i reinstall the firmware, but i have the SPRINT ACTIVATION, how i can bypass it?
sidemzuga said:
hi, i reinstall the firmware, but i have the SPRINT ACTIVATION, how i can bypass it?
Click to expand...
Click to collapse
Not really. Part of the downside of the TOT
Sent from my LGLS992 using XDA-Developers mobile app
garwynn said:
Not really. Part of the downside of the TOT
Sent from my LGLS992 using XDA-Developers mobile app
Click to expand...
Click to collapse
so what i need to do?
sidemzuga said:
so what i need to do?
Click to expand...
Click to collapse
how do you get flashtool to work.. i used the h850 dll and zv3 firmware but upon loading says (S) failed to load.. help plz..
Hello guys!!
I have LG G5 model : ls992
I want to root it, there is no TWRP recovery available for this version. I tried different apps like king root, kingo root and 10+ more from different websites but all get failed. What can i do to root my phone. Please any one help!!