Hello.
I dont know why but i cant overclock my phone more than 691 mhz.
Can some one tell is there any option to overclocked more ?
Its annoying because everyone can overclocked more than 700 but i cant ;(
Sent from my E15i using Tapatalk
which ROM you using?If there no option to set it higher than 691 then you cant.
Overlock
Install gingerdx v22 and alfs kernel v07 isc with libs.I have max 729mhz now i can overlock up to 748mhz.Try this.I with gdx swap 200 ,chainfire ,powervr plugin,748mhz i play gta3 nicley.Sorry for my bad English.When you didnt have unlocked bootloader,try the new overlock module for stock kernel didnt custom kernel.
xperiafan13's CM7.2 GINGERBREAD rom with ALFS kernel V7 ICS run stable with 806 mhz. And stable too in: gingerdx v22 , gingerx v24b. and nAa kernel: newest mini cm, gxr v4
Maybe You're using stock kernel. I think that every1, who OC their devices @700+ mhz are using custom kernels
It totally depends on your phone itself. But it could be more stable or unstable per ROM - Kernel combination.
depends on the phone I guess. I can go 806MHz with stock kernel
Im using custom kernel nAa 10 + minicm7 2.1.8
I can oc to 825Mhz but it last to 15 seconds . But my stabl is 806 mhz. But it depends on the phone. Some people can oc more some less.
But when i was at stock kernel my phone never reboots on 691 mhz , now on nAa 10 sometimes get reboots. Maybe my phone cant be overclock more , that little bit sad
Use SETCPU to scale your maximum overclock frequency and the maximum frequency depends on the device. So gud luck... Right now i have Overclocked to 748 mhz and will try the next frequencies soon I am on Stock kernel with ginger dx
I try with gdx and alfs . Can some give me the link to new gdx ?
Sent from my E15i using Tapatalk
EDIT: Okey i have it ;D
Hehe I had 748 mhz OC on stock kernel and was stable;D
Sent from my E15i using xda premium
I am using MiniCM7-2.1.8 Gingerbread 2.3.7 with nAa kernel and i OC 700+...
froyopro v2.4 with stock kernel can bo oc 720 mhz without reboots!
with custom kernel 720+.
I think im the only one who cant overclocked more than 691 mhz.
Sent from my E15i using Tapatalk
HaN6787 said:
depends on the phone I guess. I can go 806MHz with stock kernel
Click to expand...
Click to collapse
how did u do that? share with me please...
althought I cant unlock bootloader..
my phone restart if i overclock more then 700 mhz
gameboysheraz said:
my phone restart if i overclock more then 700 mhz
Click to expand...
Click to collapse
me too... can't overclock more than 691 Mhz .. 700+ --> freeze and reboot
i use minicm7 2.3.7 @ newest naa Kernel...
which governour is the best and 700+ mhz running stable?
checox said:
me too... can't overclock more than 691 Mhz .. 700+ --> freeze and reboot
i use minicm7 2.3.7 @ newest naa Kernel...
which governour is the best and 700+ mhz running stable?
Click to expand...
Click to collapse
SmartassV2
Sent from my E15i using xda premium
Related
Hey guys I flashed my cappy with phoenix ultimate and flashed onix 2.0.1. For some reason with setcpu my cpu doesn't overclock past 1120 mhz it used to go to 1300 mhz :/
Sent from my SAMSUNG-SGH-I897 using XDA App
hmm.. could it be the kernel having the limitation? Usually these OC/UV apps will show what the kernel is capable of being clocked to. You coud try another app- but if you had a kernel that went to 1300mhz and that hasn't changed.. you should see the 1300 step.
Can anyone help me on how to overclock my device...
m using zeus v6.2 with heuxx kernel which comes with the rom...
Can anyone suggest any app regarding overclocking as i have used set cpu but i am to able set my custom frequency...
Plzzz help...
CookieRaider said:
Can anyone help me on how to overclock my device...
m using zeus v6.2 with heuxx kernel which comes with the rom...
Can anyone suggest any app regarding overclocking as i have used set cpu but i am to able set my custom frequency...
Plzzz help...
Click to expand...
Click to collapse
You can overclock zeus with zeus tweaker. It is already installed so no need to find another.
Sent from my LG-P970 using Tapatalk 2
you could have tried a bit harder..
if you used the search button or have read huexxx's topic you already had the answer. it's discussed many times..
shame on you!
Ohh my bad..
I overclocked my device to 1150 and selected smartass v2 as my profile but den too m getting my benchmark around 1850..
How can I increase my benchmark??
CookieRaider said:
Ohh my bad..
I overclocked my device to 1150 and selected smartass v2 as my profile but den too m getting my benchmark around 1850..
How can I increase my benchmark??
Click to expand...
Click to collapse
Disable fsync feature through zeus tweaker. It is in misc options.
And do 3 and more runs to get the best benchmark results.
Sent from my LG-P970 using Tapatalk 2
hello guys,
how about your experience , how fast your x8 to overclock in safely ??
share with me..
I think:
stock kernak: max 748
custom kernal: max 806
It's depend on you CPU capability (different for everyone)
For me only 748 on custom kernel
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS miniCM9 3.0.2 on nAa ICS 03 kernel *
Thank you very much nAa!
Set at a rating...if it doesn't reboot is ok
Remember oc is generally dangerous, the higher you set it the more dangerous it gets.
Sent from my X8 using xda premium
Never tick set on boot without testing if the clock work or not.
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS miniCM9 3.0.2 on nAa ICS 03 kernel *
Thank you very much nAa!
Yep, u can put it as high as ur phone can take.. For me 748, but i use 600 and undervolt cuz my phone is super smooth at 600...
If you want stable for stock ROM(like seriously won't reboot at all...) you set 729mhz for custom kernel on Alfs you can set higher to around 768mhz but for nAa kernel for me max 748mhz...
Thanks guys , nice info , i think 691MHz fast enought for me
Sent From My E15i Using XDA Ultimated
for me it's 825mhz without reboot....Alfs Kernel
HI guys,
How can i overclock the GPU of my international note ? I am using Rocket Rom JB.
Thanks in advance.
download rom tool box lite tap in to perfromance>cpu control> on the CPU sliders, slide max to 1400 Mhz, choose noop on I/O Scheduler and ondemand on governor. or you can also download antutu CPU Master Scale it to ondemand, Noop and 1400Mhz,, Im no developer but atleast I read a lot before.
^ No, Not CPU. I am talking abut GPU, i.e. Mali 400 MP.
buzzdr0id said:
^ No, Not CPU. I am talking abut GPU, i.e. Mali 400 MP.
Click to expand...
Click to collapse
I believe the kernel has to support it. I run siyah kernel on my gs2. I'm able to oc gpu with ease.
Sent from my GT-N7000 using xda app-developers app
^Which software did you use to oc the gpu ?
buzzdr0id said:
^Which software did you use to oc the gpu ?
Click to expand...
Click to collapse
Try "tegrak" app
^ Which software to choose from the market ? Tegrak overclock ultimate or kernel+ ?
buzzdr0id said:
^ Which software to choose from the market ? Tegrak overclock ultimate or kernel+ ?
Click to expand...
Click to collapse
First try tegrak overclock..if it works then buy tegrak overclock ultimate
Oh ok but what is tegrak kernel+ ?
Thanks
buzzdr0id said:
Oh ok but what is tegrak kernel+ ?
Thanks
Click to expand...
Click to collapse
Tegrak kernel+ works only with tegrak kernel and its not compatible with n7000
try voltage control with a supported kernel.
Sent from my GT-N7000 using xda app-developers app
Just flash the overclocked Hydracore kernel. It automatically overclocks the C.P.U to 1.6 ghz and the GPU to 400 Mhz.
Sent from my GT-N7000 using xda app-developers app
Hydracore OC Kernel have 3 step freq in gpu 200/266/400Mhz only 400 is max overclock :/ S3 have some gpu but more fresh and support over 700mhz
in S3 forum kernel support 1800mhz and 800mhz gpu this lazy.! versions experimental.
Tegrak Unlimited change freq.!
Thanks everyone. I shall try and let you all know the result
Cheers.
Hi
I have install setCpu on my touchpad (64G) with the latest nightly (cm-9-20121111-NIGHTLY-tenderloin)
It seems to work fine and stats tells that i am up to 1.5GHZ.
I have seen on the forum the GamerZ kernel tuned to OC the touchpad.
Question is simple, is there a benefit from installing this kernel or setCpu is enough, or both are meant to live together ?
Thanks
Well, there is the GPU OC, which really helps with fps if your TP can handle it...
Sent from my cm_tenderloin using xda premium
-SGA- said:
Well, there is the GPU OC, which really helps with fps if your TP can handle it...
Sent from my cm_tenderloin using xda premium
Click to expand...
Click to collapse
So if i install this kernel, there is no need for setcpu ?
ethome said:
So if i install this kernel, there is no need for setcpu ?
Click to expand...
Click to collapse
With the GamerZ kernel you'll be able to OC to 2.something ghz and the GPU will be overclocked
SetCPU is used to adjust the frequencies.