dears
i was using ICS RC2.1, and i used the glitch kernel, then i updated to rc4.1, but i nstalled Devil kernel, after installing it each time i go to recovery, all i can find clock work recovery mod not the new kernel, from settings, the installed kernel is:
3.1.10-galaxys+telus-257255-g0b9d335-dirty.
so how can i change it :S, even i tried to install many kernels, each time return to the original..
thank you
U have the devils kernel only. What's the issue??
nooo, i mean each time i install new kernel and reboot the recovery i cant find the new kernel , i only find the old sticky one...
Related
Hi all
I possess one o2x at present there 1035.21_20110218 on mckr12 Roma fr16 beta 4.
I noticed that when I flash a capable kernel oc / uv, my phone stuck on the log's logo...
Anybody has already met this problem?
Thanx
No but if you reflash the rom it will remove the new kernal and put the original one back on and you will keep all your apps etc aswell
I have this problem too, i flash the new Fr17 & Fr18 mcr can't boot. If i just flash the older Fr16 kernel, it booted...............
soo. no way to have a uc/uv kernel on my o2xs ? :'(
If you flash vork then it won't work cause it was meant for CM7
just reflash back the ROM in recovery
Back to Stock Rom.
Try to back to stock rom as said dusitmon123, then Wipe everything, and reinstalling custom rom will work...
dridri85 said:
Try to back to stock rom as said dusitmon123, then Wipe everything, and reinstalling custom rom will work...
Click to expand...
Click to collapse
unfortunately, i have try two times and it is same.
Hi,
I am using the stock gingerbread rom from CSL running the utterchaos kernel by doomlord & Napster.
I tried changing rom's to CM7 found at http://forum.xda-developers.com/showthread.php?t=1333503
I did everything as described, wiped data/factory reset and then flashed the rom.
It said success but when I rebooted phone it shows
"booting UtterChaos Kernel by Doomlord & Napster" screen and nothing happens further. The screen goes dark and again the same boot screen shows.
I guess its going into bootloop.
How do I fix this?????
Thanks
U should root ur device...flash clockwork mod and then flash rom
Sent from my GT-S5570 using xda premium
How do you think I flashed the rom in the first place?
Device rooted, latest version of CWM.
innocuous76 said:
Hi,
I am using the stock gingerbread rom from CSL running the utterchaos kernel by doomlord & Napster.
I tried changing rom's to CM7 found at http://forum.xda-developers.com/showthread.php?t=1333503
I did everything as described, wiped data/factory reset and then flashed the rom.
It said success but when I rebooted phone it shows
"booting UtterChaos Kernel by Doomlord & Napster" screen and nothing happens further. The screen goes dark and again the same boot screen shows.
I guess its going into bootloop.
How do I fix this?????
Thanks
Click to expand...
Click to collapse
hi
use SUTL and flash stock rom then get the CWM and install the CM7 via CWM it should work
this CM7 is on .35 based kernel and utterchaos kernel is .32 , that is creating the problem .....
So, if you want to try this rom, first install TJ's RC3 rom than install this rom .....
if u dontt want to try this now (as u have bricked ur phone once ) ....
just install stock GB rom via SUT ....
innocuous76 said:
Hi,
I am using the stock gingerbread rom from CSL running the utterchaos kernel by doomlord & Napster.
I tried changing rom's to CM7 found at http://forum.xda-developers.com/showthread.php?t=1333503
I did everything as described, wiped data/factory reset and then flashed the rom.
It said success but when I rebooted phone it shows
"booting UtterChaos Kernel by Doomlord & Napster" screen and nothing happens further. The screen goes dark and again the same boot screen shows.
I guess its going into bootloop.
How do I fix this?????
Thanks
Click to expand...
Click to collapse
dude since edowar's latest cm7 is Based on a new kernel 2.6.35.7, u have to flash stock sharp rom through SUT. then use tj's cwm recovery for latest kernal and flash cm7 27-3-2012
else you can flash UPDATE ROM 31-12 directly it is also good rom
So basically I have to flash 2 roms!
Can't I just flash a .35 kernel instead of the .32 one and then flash the CM7 rom?
innocuous76 said:
So basically I have to flash 2 roms!
Can't I just flash a .35 kernel instead of the .32 one and then flash the CM7 rom?
Click to expand...
Click to collapse
No u cant. But if you're from stock GB you could flash older CM7 based on the. 32 kernel instead
Sent from my CSL-MI410 using XDA
Hi guys I'm new to the N7000 forums, but I am no means new to the android and flashing scene. I'm just a bit confused as to how to safely install ROM's on the note.
I've attached a screenshot of my "about phone" so you guys can tell me what kernel I should flash before installing different ROMs
The ROM(s) I'm interested in flashing are Jellybam, Sweet ROM (JB version) and Ultimate jellybean. Can these roms work with any safe kernel? i.e. once iv'e flashed philz or franco kernel I can let the flashing begin.
Also do I need to flash a safe kernel in order to install cyanogenmod or other, not based on stock roms?
Forgot to mention that I am rooted. Any help at all would be appreciated, if I am wrong about anything so far, feel free to set me straight.
Thanks to all who responded, if anyone else wants to reply feel free but i'm going to mark this as resolved so their won't be any confusion.
amd-dude said:
Hi guys I'm new to the N7000 forums, but I am no means new to the android and flashing scene. I'm just a bit confused as to how to safely install ROM's on the note.
I've attached a screenshot of my "about phone" so you guys can tell me what kernel I should flash before installing different ROMs
The ROM(s) I'm interested in flashing are Jellybam, Sweet ROM (JB version) and Ultimate jellybean. Can these roms work with any safe kernel? i.e. once iv'e flashed philz or franco kernel I can let the flashing begin.
Also do I need to flash a safe kernel in order to install cyanogenmod or other, not based on stock roms?
Forgot to mention that I am rooted. Any help at all would be appreciated, if I am wrong about anything so far, feel free to set me straight.
Click to expand...
Click to collapse
if you are on stock kernel then download Philz kernel for LP7, flash that in recovery, should give you root again aswell. then you can flash away to any of the ROMs you listed above. just every time you flash a ROM or think of factory reset or data wiping make SURE you're on a SAFE kernel. that's all
as you are rooted, just install any safe kernel like hydracore or philz. thats all. then you can try out any rom. Just make sure you follow the instruction to flash the rom in the OP
I saw that the Philz kernel has a lot of different versions, which one do I choose, am I right in saying the UBLPC one, as that is my build number? Or any one can work, I also read that you should not flash with the temp CWM, I will admit though I used the temp CWM to flash the root files and i'm still ok but I don't want to take any chances, how do I flash with the stock recovery?
amd-dude said:
I saw that the Philz kernel has a lot of different versions, which one do I choose, am I right in saying the UBLPC one, as that is my build number? Or any one can work, I also read that you should not flash with the temp CWM, I will admit though I used the temp CWM to flash the root files and i'm still ok but I don't want to take any chances, how do I flash with the stock recovery?
Click to expand...
Click to collapse
this is the one you use - PhilZ-cwm6-UBLPC-UUB-2.7
http://www.mediafire.com/file/35d4kd...2.7-signed.zip
the zip file mentioned above can be flashed using stock recovery. Put the file on ext SD card > boot into recovery > apply update from external storage > thats it
nokiamodeln91 said:
the zip file mentioned above can be flashed using stock recovery. Put the file on ext SD card > boot into recovery > apply update from external storage > thats it
Click to expand...
Click to collapse
First, forget about the franco kernel. The franco kernel for the Note is outdated and thus useless. Second, if you plan to flash a JB leak the only kernel you should use is PhilZ. And especially important with the JB leaks is to stick exactly to the instructions how to flash. Otherwise your phone won't even boot.
Have fun with your device! The Note is still an outstanding phone.
Sent from my revived Galaxy Note
Thanks guys for the quick replies, i'm gonna flash the philz kernel now and give the leaked version of JB a try.
make nandroid backup 1st..
Hi All,
I'm newly registered as I have problem in using HydraCoreNirvana Kernel.
I was using ZSLPN ICS Stock ROM with PhilZ-cwm6-ZSLPN-OZS-v2.7 Kernel.
A few days ago, I booted into CWM (Power + Up + Home) to flash MaxFu_HydraCoreNirana_n3_std.zip kernel.
HydraCore Kernel is working fine except that this kernel uses a lot of battery according to the
battery monitor. I keep using it for 3 days to make sure the whole system is stable after flashing a new kernel
but it is still consuming a lot of power.
Today, I boot into CWM (Power + Up + Home) to flash back the PhilZ-cwm6-ZSLPN-OZS-v2.7.zip kernel.
After flashing, I select reboot system, the "Galaxy Note N-7000" shows up and then black screen, i.e. without
the boot animation screen. I wait for a long time but still black screen. I tried to power up serveral times but same
thing happen. I then boot into CWM (Power + Up + Home), I can see PhilZ CWM so the PhilZ kernel should be flashed.
I then use this PhilZ CWM to flash Hydra kernel again and then reboot system. It can boot up.
I then try to boot into CWM to flash PhilZ kernel again, same problem. Now I flash back to MaxFU_HydraCoreNirana Kernel.
What's wrong with my procedures? Any idea? Now, I'm afraid to flash any other kernel as I am afraid I cannot flash
back to MaxFu Kernel and that will brick my phone.
Please help. Thank you so much.
I cannot post in Max_FU kernel thread as I am new here and not allowed to post there.
http://forum.xda-developers.com/showthread.php?t=2053084
Thanks.
It is happening because the latest Hydracore kernels have the new Mali drivers, which are incompatible with previous kernels. So, when you first flashed Hydracore, it also installed these new drivers; when you flash PhilZ kernel back, the new drivers are still there, so the kernel can't boot up. The solution is to install a "revert" package which will install and older Hydracore kernel (without the new Mali drivers), and also delete the installed drivers. Search the Hydracore thread for "Returning back to Hydra v5.3 std.zip". This is the file you should get and flash through CWM. After that, you can flash PhilZ kernel again.
To make it easy, download and flash returning back to hydra.zip 1st. After that you can flah philz kernel.. You can go to philz tread you kernel has been updated to v3.99
dbolivar said:
It is happening because the latest Hydracore kernels have the new Mali drivers, which are incompatible with previous kernels. So, when you first flashed Hydracore, it also installed these new drivers; when you flash PhilZ kernel back, the new drivers are still there, so the kernel can't boot up. The solution is to install a "revert" package which will install and older Hydracore kernel (without the new Mali drivers), and also delete the installed drivers. Search the Hydracore thread for "Returning back to Hydra v5.3 std.zip". This is the file you should get and flash through CWM. After that, you can flash PhilZ kernel again.
Click to expand...
Click to collapse
Thank you so much for the detailed description. I've not noticed that Mail drivers are being installed.
zai89 said:
To make it easy, download and flash returning back to hydra.zip 1st. After that you can flah philz kernel.. You can go to philz tread you kernel has been updated to v3.99
Click to expand...
Click to collapse
Hi zai89, thank you so much for your file. I flashed it and then I can flash back to PhilZ newest version.
By the way, I have used your file (v5.3 std kernel) for a while and it consumes the power normally. I still don't
understand why the HydraCoreNirvana drains huge power in my ROM (of course I am not complaining about
HydraCoreNirvana kernel, maybe my ROM problem). Since now I can flash back to PhilZ kernel, I may try
the v5.3 standard you suggested and see how good it is.
Once again, thank you very much for your time and kindly help.
Hello guys,
I have a friends xperia x8 that she gave me to upgrade, i wanted to update it to minicm10 for xperia x8 or jellyblur, so whenever i want to install the ZIP it says status 0 and installation aborted.
I can't boot to android, also i tried changing the kernel to NAA or some others but i can't manage to boot, it's still the same 1.6 rom, but i can't even boot it with any kernel...
I would like to ask for some advice and maybe the stock kernel + Rom if someone has it.
Still, i want to install gingerbread or ICS/JB ...
I CAN install kernels vía flashtool, i also can boot some custom kernels with cwm and try to install...
MAYBE if i had a working rom for NAA but when i want to install the zip it says status 0 : (
Thanks guys
ggsetup.exe must be installed on your pc.. you can found it on yourdirectory:/flashtool/drivers also u must install adb driver. but before u flash a new kernel, u must unlockbootloader. see the general sub thread for it. if u have a proble "status 0" try to redownload a rom and flash with cwm recovery.
petrukgrinder said:
ggsetup.exe must be installed on your pc.. you can found it on yourdirectory:/flashtool/drivers also u must install adb driver. but before u flash a new kernel, u must unlockbootloader. see the general sub thread for it. if u have a proble "status 0" try to redownload a rom and flash with cwm recovery.
Click to expand...
Click to collapse
I have flashtool working at full power!, i flashed different kernels, a freexperia, naa and other versions of naa, but i can't make it work.
May i ask for a stock rom and kernel?
Oh, and... is there a way to fully restore the phone? like kernel and rom with flashboot or something like that?, because i can't turn it on
why cant turn it on? hardbricked?
can't restore expect nandroid backup..
rom & kernel, you must try one by one cause every rom/kernel will be different on other phone..
petrukgrinder said:
why cant turn it on? hardbricked?
can't restore expect nandroid backup..
rom & kernel, you must try one by one cause every rom/kernel will be different on other phone..
Click to expand...
Click to collapse
It's not hardbricked, i can see the kernel logos loading but they get stuck on boot loop.
So you tell me i have to try a ton of kernels first?...
Is there a compilant kernel that has the CWM allready installed with high compatibility?
afaik status 0 is caused by a wrong/ corrupted binary/update scritp or an error related to that.
update to 2.1 via pcc and make sure your baseband is 015 then reroot. install an updated cwm and redownload rom. use "install zip from sdcard" in cwm to flash rom after doing the wipes.
Just because i don't doesn't mean i can't.