Database Develop

[Q] Unrooting a phone that used ODIN?? -N7000

Hey guys, Does anyone know how to unroot a Samsung Galaxy Note that was Rooted using ODIN (NetChip Method)? Am i the only one who made this mistake and cant unroot??
im not sure if there is already a thread existing about this, i couldnt find one.
i also tried using the "DoomLord_Unrooting" but didnt work for me neither, still have Superuser and still able to go to my system files.

replied just few min back, Dont remember wether on PM or your other thread.

crz2uf said:
Hey guys, Does anyone know how to unroot a Samsung Galaxy Note that was Rooted using ODIN (NetChip Method)? Am i the only one who made this mistake and cant unroot??
im not sure if there is already a thread existing about this, i couldnt find one.
i also tried using the "DoomLord_Unrooting" but didnt work for me neither, still have Superuser and still able to go to my system files.
Click to expand...
Click to collapse
Hey guys, I have the same problem. Tried the same method as above. Couldnt find the thread about it.
I Even tried to download the stock firmware from Dr.Ketan's post and use Odin but couldnt extract the files.
Please Help...
Thanks

you need to use jig, if you have raised binary counter, back to stock ROM, can't solve it.
BTW, use winrar/7zip to extract file.

dr.ketan said:
you need to use jig, if you have raised binary counter, back to stock ROM, can't solve it.
BTW, use winrar/7zip to extract file.
Click to expand...
Click to collapse
Firstly, Thanks Dr.Ketan.
I am a newbie. Would you be able to share about 'jig' ?
Thanks in advanced again.

You can purchase OR make yourself here is guide
http://forum.xda-developers.com/showthread.php?t=819551
How to use JIG
http://forum.xda-developers.com/showthread.php?t=1354888

Using a jig is unfortunately the only way to reset your Samsung Note into a clean (warranty friendly) status. To be honest... it is some kind of "blind flight" because after loading the old ("wrong") bootloader via ODIN your device will show nothing after the reboot. Could be a little be scary for some people... but it works ;-)

dr.ketan said:
You can purchase OR make yourself here is guide
http://forum.xda-developers.com/showthread.php?t=819551
How to use JIG
http://forum.xda-developers.com/showthread.php?t=1354888
Click to expand...
Click to collapse
Before I do this, I am going to use Odin to go back to stock.
I downloaded this firmware from your post:
N7000DXLA1 -------2.3.6 2012 January-----N7000OLBKL2-------Malaysia
Questions:
1. Do I need the PDA & CSC files to execute this unroot? Where can I obtain it? Have been searching for hours still cant find it.
2. What is the best way to root it again?
Thank you.

GTN7000-Malaysia said:
Before I do this, I am going to use Odin to go back to stock.
I downloaded this firmware from your post:
N7000DXLA1 -------2.3.6 2012 January-----N7000OLBKL2-------Malaysia
Questions:
1. Do I need the PDA & CSC files to execute this unroot? Where can I obtain it? Have been searching for hours still cant find it.
2. What is the best way to root it again?
Thank you.
Click to expand...
Click to collapse
Single file .tar is enough, when u go back to stock with pc odin, it will automatically get unroot.
Installaion guide is there in post #2 from whr u downloaded.
There is best way is zergrush exploit.
Find it from my signature(first link)
Sent from my GT-N7000 using xda premium

What's the difference between rooting via zergrush vs. CF-root? How to cf-root?
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
dr.ketan said:
Single file .tar is enough, when u go back to stock with pc odin, it will automatically get unroot.
Installaion guide is there in post #2 from whr u downloaded.
There is best way is zergrush exploit.
Find it from my signature(first link)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
What's the difference between rooting via zergrush vs. CF-root? How to cf-root?
I'd like to speed up my Note. Kinda sluggish at stock. Even iPhones are smoother. What is Rocket Rom & Litening Rom? Is it safe? Which is better? or are there any better ones out there?
Just before unrooting I was using AbyssNote2.3, 1.703GHz, alot of heating & no difference that it was earlier. Netchip was smoother.
Thanks

Zergrush n CF root using same exploit to Root. CF root have extra benifit that it pushes CWM along with Root.
Really I never used any custom ROM till day. N it depend on own choice n requirement. You can find details n review of other on corresponding ROM thread, I can't comment much on it.

Noob HELP! : Softbricked my GTAB 8.9 GT-P7300... :(

First off, I'd like to thank everyone for their very useful posts! I 'kinda' understand now what everyone here is talking about...Kinda...
Anyway, I just bought my 8.9 around two weeks ago and decided to upgrade my OS to 3.2. I tried it through Kies, but Kies was not able to recognize my device, tried OTA update but was not able to connect to server...So I tried manually updating it myself, and now, based on what I read here, I think I softbricked my GTAB...The boot screen keeps loading and it does not want to push through...
My TAB is not rooted, and based from the threads that I have read here, i need to root my TAB first but unfortunately, I could not do that anymore..
Can someone please help me out? Noob here...Would really appreciate a step-by-step Noob guide on how to fix my tab...Thank you so much in advance!

JRV78 said:
First off, I'd like to thank everyone for their very useful posts! I 'kinda' understand now what everyone here is talking about...Kinda...
Anyway, I just bought my 8.9 around two weeks ago and decided to upgrade my OS to 3.2. I tried it through Kies, but Kies was not able to recognize my device, tried OTA update but was not able to connect to server...So I tried manually updating it myself, and now, based on what I read here, I think I softbricked my GTAB...The boot screen keeps loading and it does not want to push through...
My TAB is not rooted, and based from the threads that I have read here, i need to root my TAB first but unfortunately, I could not do that anymore..
Can someone please help me out? Noob here...Would really appreciate a step-by-step Noob guide on how to fix my tab...Thank you so much in advance!
Click to expand...
Click to collapse
Is this a 3G or Wi-Fi only model?
Sent from my GT-P7310

3G model...

JRV78 said:
3G model...
Click to expand...
Click to collapse
To restore functionality (and I mean to enter the ROM itself) you must use ODIN. There are several images to select in the Development forum for your 7300 unit. A how-to use it is also available in my signature's guide. Don't worry about your SDcard contents, ODIN doesn't touch them, but it does delete the apps.

ok, i tried odin3 v1.85 and I downloaded a stock rom from sammy thats suppose to be compatible for my region. ODIN status was fail after a few seconds and I got a 'binary' error message in my TAB.
I'll try and read your how-to use now..
My tabs not rooted...will that be a problem?

JRV78 said:
ok, i tried odin3 v1.85 and I downloaded a stock rom from sammy thats suppose to be compatible for my region. ODIN status was fail after a few seconds and I got a 'binary' error message in my TAB.
I'll try and read your how-to use now..
My tabs not rooted...will that be a problem?
Click to expand...
Click to collapse
No, root is independent of the device's bootloader, so no, it is not related. You can try any image as long as it's 7300.

sorry, noob question...when you say 'image', your talking about the .tar file right? so as long as its 7300, it should work?
i have the: P7300XWKK5_P7300ODDKJ1_P7300XXKJ6_HOME.tar.md5

IT WORKED!!!!!!!
Thanks nirogu325!!! I will spread the word!!!

JRV78 said:
sorry, noob question...when you say 'image', your talking about the .tar file right? so as long as its 7300, it should work?
i have the: P7300XWKK5_P7300ODDKJ1_P7300XXKJ6_HOME.tar.md5
Click to expand...
Click to collapse
Yes, the biggest-size file.
JRV78 said:
IT WORKED!!!!!!!
Thanks nirogu325!!! I will spread the word!!!
Click to expand...
Click to collapse
No worries. Good to know it worked! Enjoy!

pls help me to root 2.3.6 galaxy tab p1000

guy pls help me to root 2.3.6 p1000 user.
i use z4root and superone click and doomlordv4
all of them is not working so pls help me..

I succesfuly rooted 2.3.6 JQ9 in 3steps. I flashed JQ1 stock firmware, then i have rooted with DooMLord method v4, after that i instaled Mobile Odin paid version from market, i flashed JQ9 stock firmware with Mobile Odin. Mobile Odin cannot root my tab but i have rooted with DooMLord method v4. Sommehow Mobile Odin Injected sommething and zergrush can find a way to root.
Sent from my GT-P1000 using XDA App

sir
sir can u give me a exact instruction to root ur p1000 please
thank you sir...

marvz098 said:
sir can u give me a exact instruction to root ur p1000 please
thank you sir...
Click to expand...
Click to collapse
There is plenty of info and guides for you on site, Stop been lazy and impatient, Go and do some research and search forums instead of expecting somebody to bring the info to you.
You will learn more and retain the info if you put some work into it and read.

go download unlockroot - http://www.unlockroot.com/
make sure you set your device to Enable USB Debugging.
Press Root from the program and wait for the magic to happen.

worked
Thanks very much quite easy.

You Mr. so called ATHEiST are an idiot and do not belong in a forum!
TheATHEiST said:
There is plenty of info and guides for you on site, Stop been lazy and impatient, Go and do some research and search forums instead of expecting somebody to bring the info to you.
You will learn more and retain the info if you put some work into it and read.
Click to expand...
Click to collapse
What is wrong with you!!! Are you frustrated or do you have a huge complex and didn’t mammy give you enough attention??? You can’t wait to put people down are you, he is asking a question and did it very polite he tried it with several solutions and it did not work so he tried, it is absolutely not necessary to say that he is lazy and impatient, your here a long time and all i read from you is bashing people, why don’t you just shut up if you are not helping people and leave it to people that have no problem answering such a question, nobody is waiting for your stupid remarks. You ATHEiST are an idiot and do not belong in a forum!

You can also go for the CFROOT. OR use the overcome method by teamovercome. You just need to put your tab in download mode, and get the necessary files from TEAMOVERCOME. Although, when you do this, you will get a customer ROM installed, the overcome 7 v4.1.0 running on android 2.3.6 fully rooted.

2.3.6 root info
tried many methods, here're my results, hope this helps...
going from gb 2.3.3 rooted with cf root ...to 2.3.6 with cf root.
(all firmware from "check fus 2.1")
uk(02)...JQ8 -not easy!
eventual success, method mentioned in last page of linkost #342
http://forum.xda-developers.com/showthread.php?t=885734&highlight=tab+cwm3
Poland play... JQ9 -easy!!
used pc version 'odin3 v1.7' to flash firmware, then again to flash 'cf root kernel' (same one as in the above 'xda' link).
result -all good
tried using mobile odin pro first but had probs.
if all else fails, you could try, team overcome's custom rom, i tried that too but didn't like their version of cwm, so was determined to get chainfire's original working.

fongnd said:
go download unlockroot - http://www.unlockroot.com/
make sure you set your device to Enable USB Debugging.
Press Root from the program and wait for the magic to happen.
Click to expand...
Click to collapse
Thanks this worked for me on a galaxy tab with 2.3.6 firmware

fongnd said:
go download unlockroot - http://www.unlockroot.com/
make sure you set your device to Enable USB Debugging.
Press Root from the program and wait for the magic to happen.
Click to expand...
Click to collapse
AMAZING SOFTWARE !!! , but after rooting ... I didn't have the "TERMINAL EMULATOR" to use ... By the way i'm working on linux system :laugh: , without terminal, how do i use linux command for installation, editing , and reflashing? ... May i download terminal

P1000 and I am under Linux
I am under Linux, bored of windows, and i want to root my tab "Samsung Galaxy Tab P1000. Unlockroot doesn't work. what can i do under Linux, no Odin, NO Soft found, except eventually heimdall, but i am too newbee for using it, and newbee under Linux.... so if you can help me, i will be glad.
I search for two days in different forums and i am still dry no solution in my sight !!!!!
Thanx for helping me
An old man retired
Robby

It is easier just to install a pre rooted Rom than to root your current Rom.
Sent from my GT-N7100 using xda app-developers app

[Q] Rooting Galaxy S III SCL21

Hey guys, I just bought a Galaxy S 3 SCL21 here in Japan from AU KDDI. It is the 4G LTE, 2GB RAM variant.
So far I have not been able to find a rooting method for this phone. It is currently running ICS 4.0.4 build number IMM76D.SCL21KDALJD.
Any help is appreciated.

I think that's not i9305!
Sent from my GT-I9305

olifq said:
Hey guys, I just bought a Galaxy S 3 SCL21 here in Japan from AU KDDI. It is the 4G LTE, 2GB RAM variant.
So far I have not been able to find a rooting method for this phone. It is currently running ICS 4.0.4 build number IMM76D.SCL21KDALJD.
Any help is appreciated.
Click to expand...
Click to collapse
Hey, important information. Don't try to use manual intended for docomo phone. I tried it and now my phone is bricked :silly:
If you explore some method, please send me a mail ....

Spaam said:
Hey, important information. Don't try to use manual intended for docomo phone. I tried it and now my phone is bricked :silly:
If you explore some method, please send me a mail ....
Click to expand...
Click to collapse
No I'm not going to try that. I will let you know if find something.

that is not the I9305 so i can not reccomend anything in this forum . The I9305 forum deals with GT I9305, I9305N & I9305T model numbers

SCL21
olifq said:
Hey guys, I just bought a Galaxy S 3 SCL21 here in Japan from AU KDDI. It is the 4G LTE, 2GB RAM variant.
So far I have not been able to find a rooting method for this phone. It is currently running ICS 4.0.4 build number IMM76D.SCL21KDALJD.
Any help is appreciated.
Click to expand...
Click to collapse
Hello,
I'm with you in the "SCL21, I need help" department. Some info for you though, the international versions are in fact, very different. and the docomo version is too. DON'T use the docomo root method, it will brick your phone.
you can, however use the TeamEpic CWM recovery method. or the Mskip's Toolkit method. I've used both, and it flashes just fine. The problem I run into, is when I try to boot into recovery...the phone doesn't load. It gets stuck with an upside down SGS III logo. It will load into the normal android though. good luck. and if I come across a good method, I'll let you know. you're not alone.

bopatriot said:
Hello,
I'm with you in the "SCL21, I need help" department. Some info for you though, the international versions are in fact, very different. and the docomo version is too. DON'T use the docomo root method, it will brick your phone.
you can, however use the TeamEpic CWM recovery method. or the Mskip's Toolkit method. I've used both, and it flashes just fine. The problem I run into, is when I try to boot into recovery...the phone doesn't load. It gets stuck with an upside down SGS III logo. It will load into the normal android though. good luck. and if I come across a good method, I'll let you know. you're not alone.
Click to expand...
Click to collapse
So your phone is bricked or no ? I am asking because I changed the booting from original to the CWM recovery 2 months ago. Now I cant start up the android. I dont know how to fix it....

no brick
Spaam said:
So your phone is bricked or no ? I am asking because I changed the booting from original to the CWM recovery 2 months ago. Now I cant start up the android. I dont know how to fix it....
Click to expand...
Click to collapse
Hey bro. No my phone isnt bricked at all. what method did you use to flash? And what version of CWM did you use? Which .tar file?

bopatriot said:
Hey bro. No my phone isnt bricked at all. what method did you use to flash? And what version of CWM did you use? Which .tar file?
Click to expand...
Click to collapse
I used the docomo method before notifacations about not working on AU version

oh noos...
Spaam said:
I used the docomo method before notifacations about not working on AU version
Click to expand...
Click to collapse
So its def bricked? What are your indications? Does it do anything? It may be save able.

bopatriot said:
So its def bricked? What are your indications? Does it do anything? It may be save able.
Click to expand...
Click to collapse
yes, bricked...almost 2 months Same issue as your phone - reversal srcreen and logo Docomo when system booting. After voice nothink ...

Standard? What's that?
Yup, I'm there, too. If there's anybody out there with the Japanese AU version that hasn't already made this mistake, it would be great if they could pull the stock recovery from it with Odin... maybe if we had that, we could revive ours. I can still get to download mode, so there's still hope, right?

ryoga_otaku said:
Yup, I'm there, too. If there's anybody out there with the Japanese AU version that hasn't already made this mistake, it would be great if they could pull the stock recovery from it with Odin... maybe if we had that, we could revive ours. I can still get to download mode, so there's still hope, right?
Click to expand...
Click to collapse
You might try the following links to restore your phone. I am looking at getting the same phone this month or next, so very curious if anyone succeeds in restoring.
http://forum.xda-developers.com/showpost.php?p=33953446&postcount=1
http://forum.xda-developers.com/showpost.php?p=23188887&postcount=1
The second link requires an unmodified phone, so you might have to ask around your network and see if anyone can help. Good luck!
---------- Post added at 11:23 AM ---------- Previous post was at 11:18 AM ----------
If you happen to be able to restore your phone and wanna give it another crack. Maybe try the CWM all variants tar and see if it gets you any further. Unfortunately I can't post outside links yet, so you'll have to google for it!
Make sure to follow the directions! ;-D

If you guys are wanting to try other cwm root methods, I would choose one of the Qualcomm S4 root methods, namely either the Verizon, Us Cellular or Sprint as those would be the closest to this model. I would certainly doublecheck the partition table first though.
Oh, and if/when you guys do get root, would any of you mind pulling your radio partition? I'm curious about something with it.
Edit: Scratch that. I'm heading over to Samfirmware.com for the files, if you need to ODIN to stock, head over there and you can pull the files to restore your device.

SCL21 Conflicting reports :/
Hi everyone,
I just got the SCL21 about two weeks ago. I think it's really strange that even on the Japanese forums, there is very little info on rooting this model. From everything I've found, some Japanese sites also both say it's OKAY to root using the Docomo SC-06D recovery and Superuser zip while others say that it's NOT safe to use that same method and it will result in a bricked phone. Really odd, conflicting messages!
I know that some people successfully rooted by flashing the SC-06D custom recovery and then Superuser zip. But, it it also seems like many have ended up with a bricked phone while using this "Docomo method". I tried Bin4ry’s Root and Restore v30 but no luck installing Superuser after the ADB push from the Windows command prompt completed.
I just found the Team Epic CWM recovery method but according to Bopatriot, it flashes fine and then won't boot into recovery. Anyone have any ideas why this model phone is so difficult to root successfully?
Thanks guys!

Any Luck?
I was able to find a post somewhere about the stock rom for it that works with the SCL21 phone but, it was still 4.0.4(epic fail). Anyone have any luck finding 4.1+?

Repeat this is I9305 forum no information on other phones .
Try sammobile.com

4.1.2 was officially released for this phone just this week. Grab it OTA or from SamMobile and flash it.
If you need to root, the SC-06D method works fine.
---------- Post added at 09:41 AM ---------- Previous post was at 09:36 AM ----------
4.1.2 was officially released for this phone just this week. Grab it OTA or from SamMobile and flash it.
If you need to root, the SC-06D method works fine.

Spaam said:
Hey, important information. Don't try to use manual intended for docomo phone. I tried it and now my phone is bricked :silly:
If you explore some method, please send me a mail ....
Click to expand...
Click to collapse
i have the same phoen and now is bricked did you unbricked it?

bboydude said:
i have the same phoen and now is bricked did you unbricked it?
Click to expand...
Click to collapse
What were the steps you used?

[SOLVED][GT-P1000]rfs format failed on /dev/block/stl10

Hi, two days ago I've soft bricked my tab: GT-P1000(SPAIN/VODAFONE).And yesterday I successfully unbricked it using these files:
P1000BUJQ5_P1000ATLJQ1_ATL.zip
P1_add_hidden.pit
When I tried to boot it just got stuck on the samsung logo, I saw some tutorials saying that you should Factory Reset it, but I got this Error:
rfs format failed on /dev/block/stl10
Please I really need some help
Thanks in advance.

please I need help

up

oussito said:
Hi, two days ago I've soft bricked my tab: GT-P1000(SPAIN/VODAFONE).And yesterday I successfully unbricked it using these files:
P1000BUJQ5_P1000ATLJQ1_ATL.zip
P1_add_hidden.pit
When I tried to boot it just got stuck on the samsung logo, I saw some tutorials saying that you should Factory Reset it, but I got this Error:
rfs format failed on /dev/block/stl10 .
Click to expand...
Click to collapse
Tried this guide?

immortalneo said:
Tried this guide?
Click to expand...
Click to collapse
Yeah I used that guide to unbrick my Tab, it successfully unbricked but I got stuck in the samsung logo.
I tried to factory reset but that error showed up.
Well can I still flash it with dbdata?

I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.

oussito said:
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
Click to expand...
Click to collapse
Good for you! Thanks for sharing! Please add [SOLVED] to the title of your post! :good:

immortalneo said:
Good for you! Thanks for sharing! Please add [SOLVED] to the title of your post! :good:
Click to expand...
Click to collapse
It's done xD

thanks men
oussito said:
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
Click to expand...
Click to collapse
thanks its work for me to

oussito said:
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
Click to expand...
Click to collapse
I have the same problem.
May i know where to download dbdata.rfs.tar ?
After downloading what should I do? Do I need .PIT files?
Thank you

I had the same issues as you guys. Gingerbread is so freakin unstable its not funny. I want to get off it but there seems to be no normal way to do this for my particular tab? Cause all the guides and recommendations I have followed do NOT work. I have posted my own thread in this section and have had not a single person reply? Is this place dead now? Are there no XDA members out there who are able to help?
Question. If a bootloader is locked at Froyo and you flash an unlocked Gingerbread bootloader is it now unlocked?
Anyway to the guy above me the attachment should be able to help you. Flash it with Odin as PDA :good:

Jarmezrocks said:
I had the same issues as you guys. Gingerbread is so freakin unstable its not funny. I want to get off it but there seems to be no normal way to do this for my particular tab? Cause all the guides and recommendations I have followed do NOT work. I have posted my own thread in this section and have had not a single person reply? Is this place dead now? Are there no XDA members out there who are able to help?
Question. If a bootloader is locked at Froyo and you flash an unlocked Gingerbread bootloader is it now unlocked?
Anyway to the guy above me the attachment should be able to help you. Flash it with Odin as PDA :good:
Click to expand...
Click to collapse
Thank you Jamez. Appreciate.
So I just upload the attached file right?
---------- Post added at 01:36 PM ---------- Previous post was at 01:30 PM ----------
I came across the following blog
galaxytabupdate.blogspot.sg
But note that gingerbird 2.3.3 link is not working redirecting to some video downloader.
Also the dbdata file size seems lot different.

ramsforums said:
Thank you Jamez. Appreciate.
So I just upload the attached file right?
---------- Post added at 01:36 PM ---------- Previous post was at 01:30 PM ----------
I came across the following blog
galaxytabupdate.blogspot.sg
But note that gingerbird 2.3.3 link is not working redirecting to some video downloader.
Also the dbdata file size seems lot different.
Click to expand...
Click to collapse
That was the one that I used that allowed my device to boot. I also noted that this file was a different size to the one in the stock firmware that I downloaded. I also found out that no matter how much I tried I could not get the device to even boot using stock carrier branded firmware? So yeah that is as much as I can give you mate. I am a n00b in these areas (have dev'd for SGS1 and a number of other devices but I am n00b here in Galaxy Tab section) so I am still learning about this device.

Jarmezrocks said:
That was the one that I used that allowed my device to boot. I also noted that this file was a different size to the one in the stock firmware that I downloaded. I also found out that no matter how much I tried I could not get the device to even boot using stock carrier branded firmware? So yeah that is as much as I can give you mate. I am a n00b in these areas (have dev'd for SGS1 and a number of other devices but I am n00b here in Galaxy Tab section) so I am still learning about this device.
Click to expand...
Click to collapse
Thanks James. I could able to recover
This is what I did
followed the blog galaxytabupdate.blogspot
downloaded all the files from the link on the blog except gingerbird. Ginger bird file for my carrier I got it from samsung-updates.com
my device booted in gengerbird.
thanks I hope you can recover your device

how did you do it and made odin reconize your tab
oussito said:
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
Click to expand...
Click to collapse
i am in exactly the same turn as you are after the update i cant use odin because odin wont reconize my phone i also want to use dbata.rfs an use ginger bread
please help i am begging you'

Jarmezrocks said:
I had the same issues as you guys. Gingerbread is so freakin unstable its not funny. I want to get off it but there seems to be no normal way to do this for my particular tab? Cause all the guides and recommendations I have followed do NOT work. I have posted my own thread in this section and have had not a single person reply? Is this place dead now? Are there no XDA members out there who are able to help?
Question. If a bootloader is locked at Froyo and you flash an unlocked Gingerbread bootloader is it now unlocked?
Anyway to the guy above me the attachment should be able to help you. Flash it with Odin as PDA :good:
Click to expand...
Click to collapse
Thank you about sharing the file to FIX the System Partition ;D

dbdata.rfs.tar only helped me .

Thanx very much, I managed to fix my tab too...

Where can I get the link
Hi guys sorry to post here, but I tried downloading the rfs file and the link's down, can you please reupload it or point me to where I can find it?