Database Develop

[Q] SGS and exteral film watching

Hi there,
Has there been any work done on getting the USB to send to an external video source i.e HDMI DVI or VGA would be possible?
I have the Nokia cable used to send the display into the TV. Although it does work, the image is abysmal.
Perhaps someone might have given this some thought? Perhaps a Voodoo HDMI project is sought!

It's impossible. The chipset does not have that capability.

[Q] HDMI and speaker line out question

Hi to all
Has anyone tried the above?
Connecting the dock's HDMI to TV watch the picture in tv and try at this moment if speakers line out 3,5 jack had audio output signal? or it has no output and the sound is only going through the HDMI cable?
If anyone please has the dock, check this and give me the results.
Thanks in advance

The best conection for playing back Galaxy TAB video, picture and music files was,
GT with it USB cable on Mass Storage connection + TV with USB port & media play function.
The benefits from this conection was,
1. Single cable connection.
2. Only need connect GT to TV USB port, so less works & movements retriction between TV, couch/bed, power socket.
3. TV not only playback GT files but also provide power charging to GT. fter playback 1 hour of Full HD video, my GT battery power now up to 71% from initial around 50%+ (can't remeber the exact number).
4. Able to move around GT directory & playback files using one TV remote control. That's saving troubles of using 2 devices, GT screen + TV remote.

The thing is not a TV with USB, I have not a USB TV, I had used the dock in my Toshiba connected with HDMI cable and I have perfect video but NO SOUND at all, I had not found a solution yet, I had tried with several HDMI cables, still no sound.
I cannot find any settings for the HDMI, in the Tab.
Has anyone has any solution?
I had read that a lot of Galaxy Tab owners had HDMI sound problems.
The bad thing is when the TAB sees the HDMI connection mutes the sound in the tab and drives it through the HDMI cable.
The 3.5 Jack audio out in the back of the dock has no sound, when HDMI is connected
Any solution??

papatzis said:
Hi to all
Has anyone tried the above?
Connecting the dock's HDMI to TV watch the picture in tv and try at this moment if speakers line out 3,5 jack had audio output signal? or it has no output and the sound is only going through the HDMI cable?
If anyone please has the dock, check this and give me the results.
Thanks in advance
Click to expand...
Click to collapse
that's a really good question and makes a lot of sense. for the 2nd poster, I think almost all of us do not have usb inputs on our tvs. lucky you though
if the hdmi out sends pic + audio but the audio out is still available in the 1/8" adapter or another method then it would be really good.
would be amazing if the tab had digital audio out through a standards compliant consumer digital audio cable (rca or fibre) though
oh well, I'm dreaming right now.

[Q] Vivax HDMI output issues! please help me

I am new here and I have only one problem with my device right now, btw its:
VIVAX tablet TPC-97150
CPU 1,5 GHz - ROCKCHIPS dual-cove Cortex A9
OS - Android™ 4.1 Jelly Bean
RAM - 1G DDR3
HDD - 8GB, microSD card slot (max 32GB)
IPS panel - 9.7”, 1024x768 pixela
Kamera - Prednja 0.3MP, stražnja 2MP
Pvezivanje - USB OTG, Utor za TF karticu, HDMI, USB HOST, audio jack
1. I 've bought Gold Adapter HDMI Female to Mini Male Converter for a few $ then connected with my HDMI cable further to Sony Bravia TV.
2. Went to settings and set HDMI =ON= and resolution 1920x1080 60hz
What happend then?
TV resolution WAS 1080p as set, but tablet output was 1024x768 in the middle of TV (unstreched, wide and with ugly bright colors and some sky dots), I 've also tried on my HDMI monitor but results were the same
What is the problem? Was this expected? Can I get 1080p output on my monitor somehow with this tablet? Do I need different cables or it's impossible.
Please people help me I have noone to ask.

What does this have to do with a droid bionic?
Sent from my DROID BIONIC using Tapatalk 2

Dex connection help

So my free Dex has finally arrived. Trying to connect it to my Dell 2007WFP monitor to save buying a second screen. Got a full 1080p HDMI to VGA Video Converter Adapter Cable Male to Male D-SUB 15 Pin M/M Full 1080P with 3.5mm Audio Output One-way Signal Converter-1.8m/6f as the monitor can switch between two feeds, BUT...
I get the error message - Input signal out of range, change the setting to 1680 1050 60Hz but it's already at that. I've also tried updating my graphics card driver.
Any help appreciated :fingers-crossed:

HDMI to VGA adapter will not communicate properly the supported refresh rates through the analog interface of the VGA side, and your monitor thinks it's been set to a higher scanning frequency than it supports. The video output of the DeX is not supporting many modes. What about DVI? are you using that already with your pc?
Sent from my SM-N950U using Tapatalk

Looks like my old Dell won't allow any higher and yes the DVI is used by PC.
Looks like a new monitor is required so the free DEX is not so free

Desktop mode with poor resolution

When connecting in desktop mode to my TV LG full HD, I see icon too big but I'm not able to upload here the screenshot. I cannot find any possibility to change it into the settings.
Can anybody experienced same issue?
Thanks
Alessandro

I ran into that problem with a cheaper generic monitor and a cheap adapter. At first, I had the cheap XtremePro (generic from Amazon) and sometimes my monitior showed 480p, sometimes it was 1080p. It was weird, I had to plug it in the Samsung TV (1080p) and then go back to my monitor, it would correctly show as 1080p. When I changed the generic monitor to a Samsung, now it shows 1080p. But the adapter didn't allow me to plug it in and recharge my phone so I went out and bought a new adapter that does a great job.. recharges phone AND shows 1080p.
https://www.amazon.com/iSmartGo-Multiport-Converter-Charging-ChromeBook/dp/B076Z23HRX
LG monitor, depends on the age, sometimes it doesn't read the phone very well or it could be the adapter itself. Upgrade the adapter to the one I recommended before changing the monitor.

Bought one and used it on Samsung curved monitor 28" everything is perfect 1080p signal.. Maybe as said it's the Adapter. Mine come with USB hdmi and USB c ports. Or maybe some configuration on TV ? Did u try on a monitor?
Mine I was able to charge and use the hdmi in the same time...

Today I made additional test. The result is that with 2 adapters, 2 TVs (Samsung and!LG) and 2 hdmi cables the resolution is always poor if I connect thru hdmi (icons are very big) with all combination adapter+cable+TV. But if I use a vga cable (one adapter has both ports), it works perfectly.
It seems a problem on p20 pro hdmi management.