Pardon by the one of before I do not speak English.
Hello to all.
My problem is the following one:
I yesterday made Overclock with terminal emulator and all correct one. I put that the Overclock remembered and here I made it bad, because I remained without battery and when arriving at to house I put it to load I ignited, it and nothing, I had left pillaged. I did recovery with wipes, I returned to install everything I tried and it again but no longer there was way to obtain it. With terminal emulator I have left myself pillaged when I have introduced the frequency and tlf does a reseteo to me but without going out. if I return it to try I must clear the battery because I have left myself colgadísimo. If I do with 0.5.6beta Nova app I pass the same to me has left myself pillaged at the end of doing overclock.
Somebody knows why happens this to me?
Will have been created some file that it must erase?
Some solution?
Thank you very much, I wait for your answers. A greeting.
Spanish
Hola a todos.
Mi problema es el siguiente:
Ayer hice Overclock con terminal emulator y todo correcto.
Puse que me recordase el Overclock y aquí la cagué, porque me quedé sin batería y al llegar a casa lo puse a cargar, lo encendí y nada, se me quedaba pillado.
Hice recovery con los wipes, volví a instalar todo y lo intenté de nuevo pero ya no había manera de conseguirlo.
Con terminal emulator se me queda pillado cuando he introducido la frecuencia y el tlf me hace un reseteo pero sin apagarse. si lo vuelvo a intentar tengo que quitar la batería porque se me queda colgadísimo.
Si lo hago con Nova app 0.5.6beta me pasa lo mismo se me queda pillado al final de hacer overclock.
¿Alguién sabe por qué me ocurre ésto?
¿Se habrá creado algún archivo que tenga que borrar?
¿Alguna solución?
Muchas gracias, espero vuestras respuestas.
Un saludo.
Excuse me, but your English language is less understandable for me...
Perhaps other 43 views of this thread doesn't understand either, so no reply yet..
CMIIW
It seems to be a translation, no ?
What's the original language ?
Because neither I understand your post.
Sent from my LG-P970 using xda premium
Sobralobo said:
It seems to be a translation, no ?
What's the original language ?
Because neither I understand your post.
Click to expand...
Click to collapse
I think it's translation. If you understand, perhaps you can give solution of those problem?
redy2006 said:
Excuse me, but your English language is less understandable for me...
Perhaps other 43 views of this thread doesn't understand either, so no reply yet..
CMIIW
Click to expand...
Click to collapse
or the text is corrected or that I create.
pelucaslee said:
or the text is corrected or that I create.
Click to expand...
Click to collapse
Well, it seems I (or someone who read this thread) still don't understand your 'edited' question... I am sorry...
What is your language? Perhaps you can also write it with your own language (add your original language below your question), so other's who had same language can understand and help.
CMIIW.
redy2006 said:
Well, it seems I (or someone who read this thread) still don't understand your 'edited' question... I am sorry...
What is your language? Perhaps you can also write it with your own language (add your original language below your question), so other's who had same language can understand and help.
CMIIW.
Click to expand...
Click to collapse
Ok, posted, thanks
from what I can make out of it, it's a portugese or spanish lang (he just posted it lol)...I think he's trying to say that he overclocked his phone making it unstable (if im not wrong) and he's saying it's like a brick now and wont turn on even with plugging it in and asking if he tinkered with the wrong file or somthing?
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Huexxx said:
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Click to expand...
Click to collapse
Yes, I think that he only made wipe, and not flashing.
you can try to make wipe and reflash again.
Huexxx said:
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
hago el overclock con terminal y pongo 1,1 pero se cuelga
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Click to expand...
Click to collapse
Sent from my LG-P970 using XDA App
hago el overclock con terminal emulator. 1,1 hago los ajustes y se me cuelga.
pelucaslee said:
hago el overclock con terminal emulator. 1,1 hago los ajustes y se me cuelga.
Click to expand...
Click to collapse
Have you wiped all and reflashed?
¿Has hecho todos los wipes y reflasheado?
Hi, I work. seem silly but the keyboard has been changed and has come to first.
certainly never been clear to me what the phone reflash.
thank you very much everyone.
hug a friend.
Sent from my LG-P970 using XDA App
nada, se me queda pillado el teléfono, se reinicia sin apagarse del todo y ya no puedo hacer overclocking, se me cuelga.
Sent from my LG-P970 using XDA App
i do a full wipe and install nova 8 and aoverclock doesnt works, frezze phone or run very slow like 200 mhz :S, nova 8 have so many issues, i think rollback to stock from LG
hice full wipe e instale y nada, si overclockeo se cuelga o corre muy lento aparte de verle muchas fallas a nova q estoy a punto de irme a la stock mas estable
Only a comment: OVERCLOCK IS NOT MANDATORY
Enjoy your stock ROM overclock.
Huexxx said:
Only a comment: OVERCLOCK IS NOT MANDATORY
Enjoy your stock ROM overclock.
Click to expand...
Click to collapse
What's actually the purpose of overclock, perhaps those people doesn't know it (yet)...
CMIIW.
PARA LA VERSION EN ESPAÑOL VE AL POST 2
YOU FOLLOW THIS GUIDE AT YOUR OWN RISK!!!!
This guide, has been made for the people that has problem's with the signal, battery and other problem's installing jellybean at Latinamerica.
Most common problem: no signal at all, battery life...
F.A.Q.
Q. Why i do not have signal at jellybean, pacman, miuiv4, paranoid...
A. i think the problem is the imei, that is lost, when you flash the new versions
Q. Why the imei is lost in jellybean, but not with Ginger or ICS.
A. i don't know but this sould help you with the problem
Click to expand...
Click to collapse
To fix the problem, you just have to follow this few steps to make it work
Files needed:
1. STOCK ROM, it can be Froyo, Gingerbread, or ICS, here is a rom you can use (it will work) DJANGO ICS STOCK ROM
2. Hyperterminal Descargar
3. AIOTKV5 Descargar
4. We need a baseband Ir al post (TIP: at
Venezuela, Movistar, i used version V30B)
We need to know our original imei, it's placed at the box, or in the phone, under the battery.
Ok, let's begin!
Firs Step. (Installing the Stock ROM, if you already are on Stock, go to step 2.)
We have to flash a Stock rom, in order to view flash the baseband and connect to Hyperterminal.
Assuming you are on the oldbl, we copy the IntSD-Mount-Fix.zip and our Stock ROM to SD ext, now we open the AIOTKV5 and press option 4, and follow the steps to flash the new unlocked bootloader and install a recovery.
Restart the phone and it will open the recovery, then flash the Stock ROM, in the aroma installer, install whatever you want, we just need the rom for flash a BB.
Step 2. Flashing BB
Now we have a Stock ROM, call *#06#and we will see our imei.
Open the AIOTKV5 and press option 7 and option B, follow the instructions to put your phone Download MODE
In the SmartFlash window we click on the ROM/Copy DLoption and, inCP bin we find the BB that we got from tonyp's thread we have to mark the checkbox ERASE CAL DATA. (BE SURE THE COM PORT HAS BEEN AUTOMATICALLY FILLED)
Now, we go to START, if an error show's at the end of the flash, just close that window, and click start again, do it until, it says disconnecting from phone, or something like that.
Now, we verify our actual imei *#06# and we will se that our imei has changed to something like this 38560000001 or some strange number, or no nomber.
Now call if youare on GB: 1809#*990# / if you are on ICS: 3845#*990#
It will show up a (Hidden Menu)
Click on port settings
Click on CP USB
Click OK (DO NOT MARK THE CHECKBOX)
Now we have to search the port, Equipo -> Administrar -> Port -> LG mobile USB serial Port (COM X) where the X is a number, (Remember that number)
Step 3. Installing the Hyperterminal
Intall it normally, like always.
Open the Hyperterminal, and click Cancel to any windows that shows (some windows requiere a confirmation to close a window)
Now in the main window (a white one), click anywhere, and click on "SPACEBAR KEY" and a new window will show up, to create a new connection, select there the port you just stored, (DO NOT SELECT THE LG..)
Click properties and select the right options like these:
1st checkbox: 115200
2nd checkbox: 8
3rd checkbox: Blank
4th checkbox: 1
5th checkbox: Blank
Click to expand...
Click to collapse
and press OK, and OK
If everything's fine, the main windows will show up a, Connected: 00:00:00, in the left bottom corner.
Now type "AT" without the quotes, and press enter,
You will see this.
OK
GREAT Now it's easy!
type " at%imei " without the quotes.
You will se a number like this: 38560000001 or other number.
Now type " at%imei=YourIMEI " without quotes, where "YourImei" is your imei, you stored at the begining.
Ejemplo: " at%imei=30265978462 "
And you are done, call *#06# and you can se your imei.
Now you just have to flash your ROM, like CyanogenMOD 10.1, PAC-man, Paranoid, etc...
Please feel free to comment
Thanks to:
spyrosk For making this amazing tool, AIOTK.
tonyp For making the complete baseband guide.
carburano For making the DjangoManoucheX Stock ROM used here.
x_justin to make the english guide,
dcseek who brought us the solution.
[GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
FOR ENGLISH VERSION OF THE GUIDE, SEE POST 1
SIGUES ESTA GUIA BAJO TU PROPIO RIEZGO, NO ME HAGO RESPONSABLE POR DAÑOS O NADA ASI.
Esta guia esta pensada para todos aquellos, que tienen problemas (como yo) al instalar cualquier version mas alla de Gingerbread.
Problema mas comun: Sin señal.
F.A.Q.
Q. Porque no tengo señal en ninguna version.
A. El problema es que tu IMEI desaparece al instalarlo, aunque la BB y el RIL esten bien
Q. Problemas que causa.
A. Obviamente no tienes señal de ningun tipo (exepto por el WIFI), la bateria se consume muy rapido, ya que envia paquetes sin respuesta, y sigue intentando para obtener GSM.
Click to expand...
Click to collapse
Arreglando el problema. Solo debes seguir unos pocos pasos y asi lograr que te funcione.
Requerimientos:
1. ROM STOCK, puede ser Froyo, GB, o ICS. Aqui dejo el link para DjangoManoucheX DJANGO ICS STOCK ROM
2. Hyperterminal Descargar
3. AIOTKV5 Descargar
4. Necesitaremos la Baseband que nos guste Ir al post (TIP: en Venezuela, Movistar, me funciona la version V30B)
5. Sabernos el IMEI de nuestro telefono, en el telefono debajo de la pila, o en la caja.
Ok, comenzamos
Paso 1. (Instalando la ROM de Stock, si ya estas alli salta este paso.)
Tenemos que instalar la version STOCK de la rom, en DjangoManoucheX posee AROMA INSTALLER asi que sera facil instlarlo,
Asumiendo que estas utilizando el viejo bootloader, Copiamos IntSD-Mount-Fix.zip y nuestra rom DjangoManoucheX en nuestra SD externa, vamos al AIOTKV5 presionamos 4, y seguimos los pasos para montar nuestra particion con el nuevo bootloader liberado, e instalamos el recovery.
Reinicias normalmente, y entrara solo a Recovery, buscas e instalas normalmente, no importa que selecciones para instalar, solo queremos la rom para cambiar la BB.
Paso 2. Flasheando la BB
Ya que tenemos nuestra Rom de Stock, marcamos *#06# y veremos nuestra iMei cualquiera que sea el numero.
Abrimos el AIOTKV5 y presionamos la opcion 7 y seleccionamos la opcion B, y seguimos las instrucciones.
En la ventana de SmartFlash vamos a la opcion ROM/Copy DL y en CP bin buscamos la BB que descargamos. Seleccionamos la opcion ERASE CAL DATA. (Debes verificar que el campo PORT se rellene solo)
Y vamos a START, si aparece un error al final, solo cieralo, y dale START de nuevo, intenta hasta que diga, Desconectando.
Ahora, verificamos nuestra iMei marcando *#06# y veremos que nuestra iMei sera algo como esto 38560000001 o un numero extraño, o sin numero, da igual.
Ahora vamos a marcar, Si estas en GB: 1809#*990# / Si estas en ICS: 3845#*990#
Aparecera un Menu oculto (Hidden Menu)
Presionar en port settings
Presionar en CP USB
Presiona OK (NO SELECCIONES EL CHECKBOX QUE APARECE.)
Ya que hicimos eso, verficamos en nuestra pc, Equipo -> Administrar ->Puertos -> LG mobile USB serial Port (COM X) donde la X es un numero cualquiera, (RECUERDA EL NUMERO)
Paso 3. Instalando el Hyperterminal.
Luego de que lo descarguemos, aparecera el Wizard Setup. instalas todo normalmente, y abres el programa.
Presiona en cancelar a todo lo que aparezca, en algunos tienes que aceptar, el cancelar la ventana.
Ahora que quedo la ventana completamente blanca, haz click en cualquier parte y presiona la tecla "Espacio/Barra espaciadora" y una nueva ventana aprecera, diciendo Nueva Conexión, ahora seleccionamos el puerto que ya habiamos recordado, (NO ELIJAS EL QUE DICE LG)
y vamos a propiedades, y colocamos todo asi:
Primer recuadro: 115200
Segundo recuadro: 8
Tercer recuadro: Vacio / o Blank
Cuarto recuadro: 1
Quinto recuadro: Vacio / o Blank
Click to expand...
Click to collapse
Ahora presiona Ok, y Ok.
Y si haz hecho todo correctamente la ventana dira en la parte inferior izquierda, Connected: 00:00:00
Ahora escribe "AT" sin comillas, y presiona enter
veras algo como esto.
OK
Ahora escribimos " at%imei " sin comillas
veremos algo como esto: 38560000001 o un numero extraño.
Ahora escribimos esto " at%imei=TUIMEI " sin comillas, donde "TUIMEI" es obviamente tu numero de imei,
Ejemplo: " at%imei=30265978462 "
Y Listo! ya que hicimos todo, vamos de nuevo a nuestro movil, y marcamos *#06# y podremos ver nuestro imei.
Ahora simplemente, buscamos la ROM que nosotros querramos, como por ejemplo, CyanogenMOD 10.1, MIUIv4, o la que quieras
Y Puff el problema de la señal ya esta resuelto.
Thanks to:
spyrosk Por crear la maravillosa herramientar, AIOTK.
tonyp Por hacer la guia completa de las Baseband.
carburano Por hacer DjangoManoucheX Stock ROM que utilizamos.
x_justin Por hacer la guia en ingles.
dcseek Quien nos trajo la solucion.
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Great friend......
But i could not understand anything.....would have been better if it was English first and the other language...
But will wait for the translation
Thanks mate
O2X with Magical ICS ROM and magnificent kernels from my buddies
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Great help bro, still sounds complicated, a hug from Colombia and thanks
Sent from my SGH-I777 using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Hermano, it's not difficult jus try and don't worry about bricking the phone because it's unbrickable. Cheers.
Enviado desde mi LG-P990 usando Tapatalk 2
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Thanks... I didn't know there was a problem updating to jellybean on a p990h
Sent from my LG-P990 using xda app-developers app
It was what was missing!
many latin american users don't used cm10/cm10.1 only for imei missing!!
GOOD THREAD MAN! thanks!
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Te mereces muchos thanks, buen post, saludos desde argentina
Sent from my LG-P990h using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
For install paranoid Android, Must i follow the same procedure?
Sent from my SGH-I777 using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Thank you! Good job..
Sent from my LG-SU760 using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Eduardo9309 said:
For install paranoid Android, Must i follow the same procedure?
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Yes if you install paranoid you will have no signal at all if you have the p990h
Enviado desde mi LG-P990 usando Tapatalk 2
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
you might want to change the title as all jellybam rom threads have been banned from xda
Sent from my LG-P990 using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
tonyp said:
you might want to change the title as all jellybam rom threads have been banned from xda
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
What the reason they had been ban?
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
tonyp said:
you might want to change the title as all jellybam rom threads have been banned from xda
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Wow I didn't noticed that the tittle had been changed... I thought it was jellybean.
I will change the name.
orbital_71 said:
What the reason they had been ban?
Click to expand...
Click to collapse
I do really think it's because gio doesn't support his rom. But who knows.
Enviado desde mi LG-P990 usando Tapatalk 2
Alguien me podría confirmar que con esto se arregla el problema del porcentaje de batería que aparece como 999% y no aparece en la barra de notificaciones
Someone could confirm that this will fix the problem of battery percentage shown as 999% and does not appear in the notification bar
Thanks
Gracias amigos
Enviado desde mi LG-P990 usando Tapatalk 2
rapbyone said:
Alguien me podría confirmar que con esto se arregla el problema del porcentaje de batería que aparece como 999% y no aparece en la barra de notificaciones
Someone could confirm that this will fix the problem of battery percentage shown as 999% and does not appear in the notification bar
Thanks
Gracias amigos
Enviado desde mi LG-P990 usando Tapatalk 2
Click to expand...
Click to collapse
Yes
Sent from my SGH-I777 using xda app-developers app
Somebody can help me ?
I lost 3g on Telcel mexico, i have a p990h but when i select wcdma "3g" the signal is lost, i try with nvflash by homero, return to gb flash the baseband v30b and erase my imei and notingh :/
lolote said:
Somebody can help me ?
I lost 3g on Telcel mexico, i have a p990h but when i select wcdma "3g" the signal is lost, i try with nvflash by homero, return to gb flash the baseband v30b and erase my imei and notingh :/
Click to expand...
Click to collapse
Try choosing wcdma + gsm or something similar, not only wcdma
Sent from my SGH-I777 using xda app-developers app
Eduardo9309 said:
Try choosing wcdma + gsm or something similar, not only wcdma
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
but when i chose Wcdma + gsm, i dont have 3g stuck on E (edge)
lolote said:
but when i chose Wcdma + gsm, i dont have 3g stuck on E (edge)
Click to expand...
Click to collapse
That is weird, do you have a p990h? In telcel mexico?
Sent from my SGH-I777 using xda app-developers app
Hello
I own an Erisin ES5390U and for 2 months it started to have the following behavior : after power up the date is set to 1970 , left panel buttons are not working and I cannot open radio, bluetooth or music apps , if I try to open an app that is not trying to access an external interface there is no trouble (eg Chrome, Play store etc). I updated the device from SD card via system update menu with files sent by the manufacturer but the problem is still there. Then I received a suggestion to update also the MCU but it is not working from the menu with SD card, moreover in system info menu the MCU version is reported as "unknown".
Do you have any suggestion how can I fix this problem?
Buenas tengo un problema con la misma radio, y es que se ha quedado en bucle de inicio y solo sale el logo de android y vuelve a reiniciar e probado hacer reset atraves del agujero de reset pero hace lo mismo y no acaba de iniciar, y no encuentro la manera de entrar al modo recovery, alguien podria pasarme el archivo de la rom, o actualización para poder probar por sd, a ver si se recupera. Gracias
Good I have a problem with the same radio, and that is that it has remained in the start loop and only the android logo comes out and reboots again and tried to reset through the reset hole but does the same and does not just start, and I can not find a way to enter recovery mode, someone could pass me the rom file, or update to try for sd, to see if it recovers Thank you
Solved after putting the last update thanks
https://drive.google.com/drive/folders/1iRcQPSewKXu2Itx1yZvnWRrl64CaUR_f
Hola, alguien me podria ayudar con mi problema, el 05 de noviembre de 2020 intente instalar magisk porque el magisk manager que tenia instalado perdia el acceso root al reiniciar el movil, y yo flasheaba el magisk .zip y no quedaba de manera permanente el root, y al quererlo flashear en el twrp (como siempre) en la memoria interna, no me aparece las carpetas de la memoria interna y solo me aparecen muchas carpetas al azar con nombres al azar ejemplo: (jfbjfkelw82ieh8ewiw92w) algo asi no me dejan instalar el .zip desde la memoria interna.
Translated to English:
Hello, could someone help me with my problem, on November 5, 2020 I tried to install magisk because the magisk manager that I had installed lost root access when restarting the mobile, and I flashed the magisk .zip and the root was not permanently left , and when I want to flash it in the twrp (as always) in the internal memory, the internal memory folders do not appear and I only see many random folders with random names example: (jfbjfkelw82ieh8ewiw92w) something like that does not let me install the .zip from internal memory.
What happens is that you do not have the storage decrypted
Mau_T5 said:
Hola, alguien me podria ayudar con mi problema, el 05 de noviembre de 2020 intente instalar magisk porque el magisk manager que tenia instalado perdia el acceso root al reiniciar el movil, y yo flasheaba el magisk .zip y no quedaba de manera permanente el root, y al quererlo flashear en el twrp (como siempre) en la memoria interna, no me aparece las carpetas de la memoria interna y solo me aparecen muchas carpetas al azar con nombres al azar ejemplo: (jfbjfkelw82ieh8ewiw92w) algo asi no me dejan instalar el .zip desde la memoria interna.
Translated to English:
Hello, could someone help me with my problem, on November 5, 2020 I tried to install magisk because the magisk manager that I had installed lost root access when restarting the mobile, and I flashed the magisk .zip and the root was not permanently left , and when I want to flash it in the twrp (as always) in the internal memory, the internal memory folders do not appear and I only see many random folders with random names example: (jfbjfkelw82ieh8ewiw92w) something like that does not let me install the .zip from internal memory.
Click to expand...
Click to collapse
Hello my friend. first you need to format data and then reboot recovery
saqopakey said:
Hello my friend. first you need to format data and then reboot recovery
Click to expand...
Click to collapse
Doesn't that ensue loss of data?
Enviado de meu POCO F1 usando o Tapatalk
[email protected] said:
Doesn't that ensue loss of data?
Enviado de meu POCO F1 usando o Tapatalk
Click to expand...
Click to collapse
yes but the problem can only be solved like this :/