SIM Unlock Code Screen Missing - Motorola Droid 3

Hi All,
I apologize in advance if that has been posted and responded to, but my searches have been unfruitful. My boss has the Motorola Droid 3, stock rom, NOT rooted on the Verizon network (in NYC). He will be traveling abroad to the mid-east and contacted VZW Global Services and they provided him with the SIM Unlock code.
I then proceeded to insert my AT&T SIM card into his phone and booted it up - in anticipation of the SIM Unlock Code screen so that when he gets to his destination country, all he'll have to do is insert the SIM card which he will purchase there.
Unfortunately, no such screen appeared. I was able to access the phone's other functions and was even able to go into Settings>Wireless Settings and switched the device to GSM/UMTS only (from the default 'Global' setting). Still, nothing occurred. I then forced it to search for a network (even though automatically connect was checked) and believe it or not, midway through its search, the phone completely rebooted on its own. I thought that maybe NOW, when the phone finishes loading, that it will ask me for the SIM Unlock Code. Well, it didn't. The phone just booted up normally and indicated that there was no service (bars with the red circle and slash through it).
We called Global Services back and they claimed that we will not see a SIM Unlock code for any US-Domestic carrier SIM cards (sounds fishy to me) and the SIM Unlock Code screen will appear ONLY when a Foreign/Non-US Carrier SIM Card is placed in the phone. My suspicion is that the Global Services rep doesn't know the difference b/t his a** and his elbow and was just saying anything that seemed plausible to get me off the phone. It would be VERY BAD if my boss travels to his destination and operates on the assumption that this will work once he inserts a foreign SIM card and for it not to work at all.
Any thoughts/insights into this would be VERY much appreciated and if this topic was already discussed on another thread, I would very much appreciate the link to that thread.
I have seen similar topics on other phone model threads, but none of the instructions in each of those respective threads had a solution that seemed applicable to this specific problem.
Many MANY thanks in advance!
--Q

You should most certainly see an unlock screen with a US based sim card. I used an old deactivated T-Mobile Sim card to get my unlock code prompt. try going to the phone dialer and enter *#*#4636#*#* - give it a sec and a menu will come up. In the menu scroll down a bit and you'll see a network selection bar. Tap the bar and select GSM Auto (PRL). You should immediately get a popup or perhapse after you back out of it. If not, scan for networks again. If it still gives you problems - PM me and we'll get it figured out.

network SIM unlock screen missing for T-Mobile US
Folks,
I am experiencing a similar issue as the original poster. No matter what I do, I can not get the Droid global (stock rom, v2.3.3) to attach to the T-Mobile network. If I follow the instructions"
*#*#4636#*#* - give it a sec and a menu will come up. In the menu scroll down a bit and you'll see a network selection bar. Tap the bar and select GSM Auto (PRL) ".
I see the screen momentarily flash the t-mobile network, then switch back to indicating that the network type is CMDA-1xrtt. Any guidance would be greatly appreciated.
BTW this sim works fine in a BB Bold 9000. Also it is just a simple voice/messaging sim - no data plan.
Never mind - after more research, seems I have a phone with the US carriers locked out. - off to see if I can update it

areyouwireless said:
Folks,
I am experiencing a similar issue as the original poster. No matter what I do, I can not get the Droid global (stock rom, v2.3.3) to attach to the T-Mobile network. If I follow the instructions"
*#*#4636#*#* - give it a sec and a menu will come up. In the menu scroll down a bit and you'll see a network selection bar. Tap the bar and select GSM Auto (PRL) ".
I see the screen momentarily flash the t-mobile network, then switch back to indicating that the network type is CMDA-1xrtt. Any guidance would be greatly appreciated.
BTW this sim works fine in a BB Bold 9000. Also it is just a simple voice/messaging sim - no data plan.
Never mind - after more research, seems I have a phone with the US carriers locked out. - off to see if I can update it
Click to expand...
Click to collapse
You can follow the guide to have the phone work and it will fix that.
Sent from my DROID3 using XDA

You need to use a foreign Sim card, not an American one because Verizon disabled access to all other American gsm networks
Sent from my DROID3 using Tapatalk

eXecuter.bin said:
You need to use a foreign Sim card, not an American one because Verizon disabled access to all other American gsm networks
Sent from my DROID3 using Tapatalk
Click to expand...
Click to collapse
i have the same phone from bell and same issue, does it mean i require to do the same as well ?

queberican351 said:
You should most certainly see an unlock screen with a US based sim card. I used an old deactivated T-Mobile Sim card to get my unlock code prompt. try going to the phone dialer and enter *#*#4636#*#* - give it a sec and a menu will come up. In the menu scroll down a bit and you'll see a network selection bar. Tap the bar and select GSM Auto (PRL). You should immediately get a popup or perhapse after you back out of it. If not, scan for networks again. If it still gives you problems - PM me and we'll get it figured out.
Click to expand...
Click to collapse
I was to access the screen you mentioned however I was unable to get it to ask for my unlock code, any ideas?

I had the same issue. The unlock code was already put in. Though this may be, there is more you need to do to have it working on US carriers like AT&T.
The guide is here
Sent from my XT862 using Tapatalk 2

quordandis said:
Hi All,
I apologize in advance if that has been posted and responded to, but my searches have been unfruitful. My boss has the Motorola Droid 3, stock rom, NOT rooted on the Verizon network (in NYC). He will be traveling abroad to the mid-east and contacted VZW Global Services and they provided him with the SIM Unlock code.
I then proceeded to insert my AT&T SIM card into his phone and booted it up - in anticipation of the SIM Unlock Code screen so that when he gets to his destination country, all he'll have to do is insert the SIM card which he will purchase there.
Unfortunately, no such screen appeared. I was able to access the phone's other functions and was even able to go into Settings>Wireless Settings and switched the device to GSM/UMTS only (from the default 'Global' setting). Still, nothing occurred. I then forced it to search for a network (even though automatically connect was checked) and believe it or not, midway through its search, the phone completely rebooted on its own. I thought that maybe NOW, when the phone finishes loading, that it will ask me for the SIM Unlock Code. Well, it didn't. The phone just booted up normally and indicated that there was no service (bars with the red circle and slash through it).
We called Global Services back and they claimed that we will not see a SIM Unlock code for any US-Domestic carrier SIM cards (sounds fishy to me) and the SIM Unlock Code screen will appear ONLY when a Foreign/Non-US Carrier SIM Card is placed in the phone. My suspicion is that the Global Services rep doesn't know the difference b/t his a** and his elbow and was just saying anything that seemed plausible to get me off the phone. It would be VERY BAD if my boss travels to his destination and operates on the assumption that this will work once he inserts a foreign SIM card and for it not to work at all.
Any thoughts/insights into this would be VERY much appreciated and if this topic was already discussed on another thread, I would very much appreciate the link to that thread.
I have seen similar topics on other phone model threads, but none of the instructions in each of those respective threads had a solution that seemed applicable to this specific problem.
Many MANY thanks in advance!
--Q
Click to expand...
Click to collapse
I c, U have to use Non-US SIM CARD. otherwise U have to unlock the US radio first. but if U having trouble to pop the SIM Network Unlock Code screen, just put non-US SIM and set the mobile network from global to gsm/umts. these also apply to those whose troubled with subsidy lock, so they can input the code.

Worked for me with tmobile or att sim card in the phone. You have to backup rename the build.prop file in the system(Rename the old build.prop to build.bak) put the new build.prob file in the system, restart the phone and wa-la, it will ask you for an unlock code. Enter it give it 15 or so sec reboot the phone, select GSM/UMTS and wait 30sec to 2mins you will receive a signal.

Related

Turbo Sim success unlock D3 Subsidy-locked

Hello!
Well, after so may time since I bought my phone I finally today was able to make my D3 to make/receive calls and sms.
So I would like to share my experience so may be helpfull to another friend around here, since by today, is the first time that could be confirmed that a subsidy+locked D3 is unlocked by a Turbo sim (the info around is about D2G that was the info tha I was following in order to try another turbosim after my previous failed attemp with other turbosim version), and my phone is in original Veri$*n version 590 rom.
So, in order to be detailed and helpfull:
My D3, was and until today, Subsidy+Locked after try 2 codes that was sold to me form an internet code seller well recognized and after weeks of try the other codes providers over the net, ALL of them have the same codes. If this is You case, You like me are in bad luck and by now seems that Turbosim is the only hope.
Seems that if the D3 was activated over Veri$*n network, None of this codes works because appears that Veri$*n change the internal code OTA at the time of first activation, so if You want to have a real unlocked D3, buy for one that NEVER will be activated so very probably you could unlock it by internet sellers codes or buy for a D3 that have been really UNLOCKED with a proper code of Veri$*n.
The version of turbosim that I already bought was exactly this (Ebay # Item number: 270686865877):
http://www.ebay.com/itm/27068686587...X:IT&_trksid=p3984.m1497.l2649#ht_4125wt_1398
and I prepare my phone with this steps in order to get it working:
1) Made a factory reset form settings
2) I choose to root my phone and then made the fix for the Wrong UMTS signal indication
follow the info on this link:
http://forum.xda-developers.com/showthread.php?t=1326310
is Yellow transparent very thin and flexible and the package is ORANGE with a YELLOW big spot in front with the title: "Sim Unlock Card SmartPhone" (beware of the version because my previous turbosim that failed have the same title BUT was BLACK color with a Round Rubber cover over the chip and came in a BLACK package with the same title in RED characters and this BLACK turbosim DIDNT WORKS!), only the Yellow works.
By now I found in the seller store that It now have a new version that seems the same color but said 2011 version (the one that Iordered was 2010 version, but I almost sure that I received the 2011 version, but since I not sure I ordered both versions as spares, since during my tests I was almost sure that I damage my turbosim, but lucky was not), The Yellow turbosim package states that is compatible with 1500 diferent phone models, and that have capabilities to allow 3g data and fix to won't be out of signal when travel from one cell tower to another, so said that have 99% signal back automatically.... well, I will see in the followinbg days...
3) Then I put my local sim WITHOUT turbosim, and boot the phone (if your phone locks on android screen, bypass it by touch the 4 corners of the black background,so in the below corners of screen,just above the "buttons")
4) Go to wireless networks and set the phone for GSM/UMTS service, automatic and make an apn with the name only (in the original Veri$*n you will be not able to change mcc and mnc numbers since if You change when You save the phone delete the apn instead of save it)
5) Turn off, then remove sim and carefully put the turbosim in place and the slide the local sim over and in position (the gold rivets goes UP making contact with local sim contacts). I was in need of ligth bend over the steel belt of my D3 in order to allow put the Turbo sim with local sim above in position, AND in my case I slide the turbosim from botton to up and the sim in the other normal sim insert directin SINCE THE CHIP is somewhat tall for the steel slot of sim so, I prefer to do anything but force my turosim since it is fragile.
6) Turn on the phone and then the screen may change to tell your about autorize data roaming and I suggest You to allow it, in order to easy test of the turbosim connection and after 2-3minutes the network may be available.Try to make the process in a zone that You may be sure that have a good signal coverage from provider antennas.
7) The only issue by now is that since I not able to change APN mnc and mcc codes I not able to get any data connection, so I wonder if some friend could help me clarify if I flash another rom diferent from original Veri$*n, may be posible that I could change APN settings and save them to test if could be available data connection.
Please, excuse me by my long post, I hope that I dont bother, but I would like to share all the info, since I didnt like the short posts that have short partial info since makes the whole answer a ping-pong of posts.
Hope that may helps and best regards!
How do we know that this isn't some way to get people to buy your fake lock code.
Sent from my DROID3 using xda premium
@tacosrdelicioso
well, if You may simply check on this site, you will found a lot of my previous posts about the troubles that I have with my D3, and in addition, I found ofensive Your suggestion because I never said that I sell anything, so you put conclusions over me and my post.
To friends around here, well, I continue my testing, and the happyness dont last too much... the main trouble is that the signal lost is NOT really recovered (as same in the D2G case).So,meanwhile, the phone is in coverage, at least voice and sms work fine, but as soon You move from your place and lost signal from the cell tower that You register at phone turn on, it lost signal and the only way by now is too put the sim on another phone and reboot, then move the local sim to the D3 with turbosim and turn on again, and it will be working again... BUT what a [email protected]!N in @ss!!!
Crap, of course the only real solution is have a D3 unlocked with Veri$on code in veri$on network coverage or unlock a D3 that never was activated over veri$on with internet sellers codes.
Any help will be welcome.Thanks
Best regards to all.
https://market.android.com/details?id=ale.android.apnmanager&feature=search_result
maybe this prog. can be helpful to change mnc and mcc, give it a try..
I have now droid 3 on the way to my country.
Seller say, that the phone was never out of box and never was activated.
So this phone is unlockable ?
The bootloader on the d3 is still locked and I'm not sure if anyone is working on unlocking it because of the bootstrap/ safestrap workarounds
Sent from my Eris using XDA App
disconnecktie said:
The bootloader on the d3 is still locked and I'm not sure if anyone is working on unlocking it because of the bootstrap/ safestrap workarounds
Sent from my Eris using XDA App
Click to expand...
Click to collapse
This discussion is in no way related to the phone's bootloader lock but rather the phone's subsidy lock (meaning that the SIM tray is locked to Verizon's/Vodafone SIM card and will not accept any other SIM).
Back to topic, thank you so much xaser for your findings. I'm only having 2 problems right now:
1st: I can't get rid of the R in the signal bars, so the phone thinks it's roaming when it actually isn't. I made sure I wasn't paying roaming charges (you can never be sure) by calling my carrier and asking about it, but apparently it's just the phone thinking it's roaming.
2nd: When I get to choose my network operator (settings / wireless and networks / Mobile Networks / Select network ) I can only select 2G services which to me sounds like I won't get 3G at all. This isn't a major problem for me since I don't have a data plan, but it will be an issue when I decide to sell the phone.
Also, I would like to ask if anyone can confirm that the device can ONLY be unlocked when connected to Verizon's network, for I have tried with 2 different unlock codes here in Argentina but had no luck with them (making me turn to the Turbo Sim option).
I would also like to note that the SIM model that Xaser suggested didn't work for me, but instead this one did
I hope the thread revival helps people under the same circumstances.
I'd suggest finding a way to get the phone back on Verizon temporarily so that a valid unlock code can be used. This would be achievable by finding a trusted friend with an account in good standing with Verizon, a line which has been active for longer than six months, then have them put the D3 on their line and get the code. They can easily switch back to their phone after unlocking the D3. I'm not sure if Verizon will require the D3 be on the line for six months, but I'm sure some sweet talking would help. I've heard some cases where people get their phones unlocked after a month or two, just because they are nice to customer service ;-)
Now, about some other things talked about here: it depends on which frequencies or 3G bands your carrier uses if you want to get the D3 to work on 3G. I don't know the names of them, but the D3 gets AT&T's 3G bands and 2G of course, but isn't compatible with T-Mobile's. If you look those up and compare them to your carrier's bands, you'll know whether you'll get 3G or not.
I'd like to share my own small note and ask a question too. My D3 is unlocked by VZW and works on T-Mobile, but it loses signal randomly (like it forgot my previous selections for preferred operator, and it always shows that operator will be found automatically, which makes it not work) and sometimes it has signal but no 3G. It could be from changing towers as mentioned above, but I'm still trying to figure out whether this problem is caused by my messing with APNdroid (which is used to turn off UMTS data connection in instances when it isn't necessary, like when connected to wifi, by changing APN settings), or if it has to do with the SIM moving or being bumped, or if it's simply resetting after I cycle power. I'm used to turning my phone off then back on whenever it starts lagging or having other performance issues, but I'm wondering if that may be causing issues with my network connection or settings.
If anyone has more clues or ideas, thanks. I hope my perspective has helped here as well
Guys I just had a friend who for a Verizon Droid 3 from The US... It was locked but had it unlocked here in my country via some "code" he bought... saying it is working perfect now unlocked...
Does it work that way or not... cuz seems the Verizon phones have lots of issues when it comes to.unlocking...
Sent from my Galaxy SII
BenSWoodruff said:
I'd suggest finding a way to get the phone back on Verizon temporarily so that a valid unlock code can be used. This would be achievable by finding a trusted friend with an account in good standing with Verizon, a line which has been active for longer than six months, then have them put the D3 on their line and get the code. They can easily switch back to their phone after unlocking the D3. I'm not sure if Verizon will require the D3 be on the line for six months, but I'm sure some sweet talking would help. I've heard some cases where people get their phones unlocked after a month or two, just because they are nice to customer service ;-)
Now, about some other things talked about here: it depends on which frequencies or 3G bands your carrier uses if you want to get the D3 to work on 3G. I don't know the names of them, but the D3 gets AT&T's 3G bands and 2G of course, but isn't compatible with T-Mobile's. If you look those up and compare them to your carrier's bands, you'll know whether you'll get 3G or not.
Click to expand...
Click to collapse
Well I don't think I will be returning to the US any time soon, maybe around the end of next year. And the few friends I do have in the US are on Sprint so they wouldn't be able to give me a hand. I just want to know whether it is necessary to be within Verizon Network in order to have the phone code unlocked or if one can unlock it regardless of coverage overseas.
Also, regarding 3G, I hear what you are saying but my point is that since I am using a Turbo Sim to unlock my phone I am unsure whether the Turbo Sim will give me issues to get data at 3G speeds. The Droid 3 does indeed support Argentina's 3G bands (UMTS 850 and 1900).
Thank you all for your input.
TurbiSIM does no longer unlock my XT862. Used it successfully for about 3 months. It started with data communication errors for about a month.
I noticed that every time I went abroad and used the phone (even in flight mode), I had to reset it in order to unlock it with Turbosim. Now, total failure...
Later edit:
To my surprise, it works again! But with another SIM from a different service provider. The one that used to work is no longer working with TurboSIM.
Turbo sim works in my case
I had the same problem - hardlocked droid 3. I have tried all the way but there was no solution arround this. finaly turbo sim was the only way. now Phone works perfectly. no any problems at all.

Note I9220 no signal in UK problem

Hi All
I bought my galaxy note i9220 in China on 18th Aug. It is a genuine phone, NOT a clone just to note.
It was working perfectly fine when I was in China using a China Mobile SIM card.
Last Sunday I went to hongkong to catch a flight to London, and when I was in Hong kong, I changed back to my UK 3 SIM card, which again, was working OK in hongkong.
Before flight took off, I switched the phone off.
During the flight, I must have hit some button and accidently switched the phone on ( as when I landed, I took my phone out and it was “ON” with no signal).
Ever since I landed in Heathrow, I got no signals. The phone shows I can only make emergency calls.
I have tried all of the below but none worked:
1) Switching the phone off & on.
2) Take out battery (while phone was off) & SIM and put them back later.
3) Take out battery (while phone was on) & SIM and put them back later.
4) Reset to manufactory status.
When I go to Setting – Wireless & Network – Mobile Network – Search operator, I can see “3” in the list of operator, but when tried to connect to it, it said “Unable to connect to the network”.
The “3” sim worked fine in my old NOKIA phone so I don’t think it’s a problem on the SIM.
Anyone able to help? Thanks sooo much!
a suggestion..try to make sure you inserted the sim card with the bend angle facing the bottom of your phone..sometimes you insert your sim in a wrong way and this cause your problem..am not trying to be funny but it happen with quite a lot of people including me...
or Could be a fault on your phone..and these things happen..
or your sim is invalid for a reason..i suggest to get a pay as you go 3 uk sim card and try it ...or call 3 customer service and speak to one of their agents to have a look at your account ... they might send you another sim or pop in one of their stores and speak to someone about it...if nothing wrong with your account then am afraid it is a hardware issue with your phone..
Are you sure the phone is not a 4G phone?
This won't work in the UK as our Cell's are different as well.
Also: http://www.chinaphonereview.com/hdc-galaxy-note-plus-gt-n7000-i9220
scorpion100 said:
a suggestion..try to make sure you inserted the sim card with the bend angle facing the bottom of your phone..sometimes you insert your sim in a wrong way and this cause your problem..am not trying to be funny but it happen with quite a lot of people including me...
or Could be a fault on your phone..and these things happen..
or your sim is invalid for a reason..i suggest to get a pay as you go 3 uk sim card and try it ...or call 3 customer service and speak to one of their agents to have a look at your account ... they might send you another sim or pop in one of their stores and speak to someone about it...if nothing wrong with your account then am afraid it is a hardware issue with your phone..
Click to expand...
Click to collapse
The sim works fine on my old Nokia phone, and i tiredputing the SIM different ways but still no luck....anooying thins is the phone was working fine but started to give me prob. as soon as i landed UK...
santoz said:
Are you sure the phone is not a 4G phone?
This won't work in the UK as our Cell's are different as well.
[/url]
Click to expand...
Click to collapse
Got my mum called the phone provider back in CHina they said it should be ok to use in the UK.
They asked me to check my SIM freuency (or sth like this). and said as long as it is on GSM900/1800/1900MHZ, then it should work...what is that???
Try change your network settings between the options, gsm, hspa, and wcdma. Think it's settings, more, mobile networks, network mode.
Probably one of those should sort you out.
hkgrob said:
Try change your network settings between the options, gsm, hspa, and wcdma. Think it's settings, more, mobile networks, network mode.
Probably one of those should sort you out.
Click to expand...
Click to collapse
Thanks.
When i went into the"mobile networks", the phone started auto search of network.
And it returns network lists:
3
O2 (forbidden)
Vodafone (forbidden)
I understand the 2 being forbidden as im not a custmer of either O2 or VDF, but it just does not allow me even to connect to 3..grrr very anooying.....
I will try changing the settings when i get home today.
hkgrob said:
Try change your network settings between the options, gsm, hspa, and wcdma. Think it's settings, more, mobile networks, network mode.
Probably one of those should sort you out.
Click to expand...
Click to collapse
THere is no network mode in the mobile network ....how can i change the mobile network type in the SGN?

[Q] ATT CellUnlock.net Unlock to Rogers Issue

I got a code from Cellunlock.net and I followed the video instructions carefully. I've been using ATT in the states since the launch so I was activated so thats a nonissue.
I put in the Rogers SIM, got "Enter your unlock code". I did that and then it said "SIM Not Provisioned MM2#"
Im getting 4 bars of cell reception and I went into the network settings to specifically select Rogers and it sat and said "Attempting to register on rogers". After 5 minutes nothing happened.
I don't have any ROGERS in the top left corner for my carrier. Just 4-5 signal bars.
When I try to enter the #7465625*638*UNLOCKCODE# method(s) it just says "EMERGENCY CALLS ONLY".
I cant even do
*#7465625#
1. [xxx] Network lock
2. [xxx] Subset lock
3. [xxx] SP lock
to check. It just says emergency calls only.
Should I try doing the activation methods with the ATT sim in and not the rogers? Kinda afraid of messing this up. Is this what "hardlocked" is and I need to use the Defreeze method? Im deeply confused.
SMN900A, MJ5, Kingo Rooted
OmegaNemesis28 said:
I got a code from Cellunlock.net and I followed the video instructions carefully. I've been using ATT in the states since the launch so I was activated so thats a nonissue.
I put in the Rogers SIM, got "Enter your unlock code". I did that and then it said "SIM Not Provisioned MM2#"
Im getting 4 bars of cell reception and I went into the network settings to specifically select Rogers and it sat and said "Attempting to register on rogers". After 5 minutes nothing happened.
I don't have any ROGERS in the top left corner for my carrier. Just 4-5 signal bars.
When I try to enter the #7465625*638*UNLOCKCODE# method(s) it just says "EMERGENCY CALLS ONLY".
I cant even do
*#7465625#
1. [xxx] Network lock
2. [xxx] Subset lock
3. [xxx] SP lock
to check. It just says emergency calls only.
Should I try doing the activation methods with the ATT sim in and not the rogers? Kinda afraid of messing this up. Is this what "hardlocked" is and I need to use the Defreeze method? Im deeply confused.
SMN900A, MJ5, Kingo Rooted
Click to expand...
Click to collapse
Based on what I see the SIM you have from Rogers has not been activated by Rogers yet. That is what the NOT PROVISIONED message means. You need to call Rogers and see if the SIM is actually active. It looks to me the unlock worked since it see the SIM now as Not provisioned. Usually if the unlock fails it will just kick you back the the code entry screen..
Solarenemy68 said:
Based on what I see the SIM you have from Rogers has not been activated by Rogers yet. That is what the NOT PROVISIONED message means. You need to call Rogers and see if the SIM is actually active. It looks to me the unlock worked since it see the SIM now as Not provisioned. Usually if the unlock fails it will just kick you back the the code entry screen..
Click to expand...
Click to collapse
Ugh how embarrassing...
I originally thought maybe that was the case too, but I was positive it wasn't... at first.
What ended up happening when I opened the Rogers account and got my SIM was the man pulled out a large SIM card. He started entering account information and when I noticed it I said "Im sorry, I think I need the microSIM not that one."
He said "oh! Perfect timing. I can still correct that, almost sent it without it." And he scanned the microSIM into the computer.
So I was positive that it was activated due to that.
But of course, it wasn't.
I walked into another Rogers that I happened to be closer to earlier today than the one I started at and the man was like "yep, the SIM number on your account is not the one in your phone right now." He changed it on the account and handed me back the SIM. Popped it in - and bam, Rogers 4G LTE.
I was dead set on it being something I messed up, the code not working, or some Samsung nonsense.
Unrelated: Im getting 48/17mbps. WOW, screw ATT. This thing is outstanding, and at 1/2 the price. Literally half.
http://www.speedtest.net/my-result/a/712032392

AT&T unlocked 2014 x not working on tmobile

I have an unlocked AT&T xt1097 but it won't register my T-Mobile Sim card. It registered for about 3 minutes, got a welcome to T-Mobile text and that was that. My phone number shows up in settings, but it shows I have zero service. I've reset, and rebooted several times to no avail. My sim works in a nexus 6 so it's not the sim. Imei os clean. Does anyone have any ideas what it could be or how I could get it to work with my T-Mobile sim?
When you say unlocked, unlocked Sim or unlocked boot loader?
sim unlock. As far as I know there's no boot loader unlock.
Could it be that the imei isn't in T-Mobile's data base since it's an at&t moto x?
Edit: went and put the imei in to tmobiles imei checker and it couldn't figure out what device it was and if it was okay to use on their network. Now I just need to verify with T-Mobile and see if they can register the imei.
Bl00dRunzC0ld said:
I have an unlocked AT&T xt1097 but it won't register my T-Mobile Sim card. It registered for about 3 minutes, got a welcome to T-Mobile text and that was that. My phone number shows up in settings, but it shows I have zero service. I've reset, and rebooted several times to no avail. My sim works in a nexus 6 so it's not the sim. Imei os clean. Does anyone have any ideas what it could be or how I could get it to work with my T-Mobile sim?
Click to expand...
Click to collapse
did you ever get it to work? i am experiencing the same issue. it connects to my friends AT&T network fine but with t-mobile it just says "cant register" etc,etc.
Change the APN settings
I have had a problem like this with my unlocked phone and AT&T, but when they set it up in the AT&T store they fiddled with the APN settings. I had to do the same to get my wife's unlocked Lumia 635 to work on the T-Mobile network. Try the values used in the link attached and see if it works.
http://www.4gtricks.com/2013/04/t-mobile-4g-apn-t-mobile-4g-apn-settings.html
Att motox on tmobile
Reireichan said:
did you ever get it to work? i am experiencing the same issue. it connects to my friends AT&T network fine but with t-mobile it just says "cant register" etc,etc.
Click to expand...
Click to collapse
.
I was able to connect to tmobile network some times, able to make calls. No data connection at all. I played with APN settings and everything else. any help..?
I have an unlocked ATT x1097 and it works just fine with tmobile.
You just have to MAKE A NEW APN SETTING.
When you put a tmobile sim in it, it will automatically create a couple of T-MOBILE apn settings. Just leave that as is and create a NEW APN SETTING with same info you can find from Google. Select that as your data apn. And reboot the device for the best result. It should fixed the problem.
For those of you whose sim does not register into tmobile network; i think it could be one of the following reasons:
1. Original ATT modem does not work well with tmobile frequency in your area
2. The device is locked (stolen, non-payment, etc)
3. The device is broken
4. Your SIM card is damaged
As long as you are at the home screen with tmobile sim, your phone is GSM UNLOCKED, and it iwill never lock again.
keoaloha said:
I have an unlocked ATT x1097 and it works just fine with tmobile.
Click to expand...
Click to collapse
Where did you get it unlocked?
keoaloha said:
I have an unlocked ATT x1097 and it works just fine with tmobile.
You just have to MAKE A NEW APN SETTING.
When you put a tmobile sim in it, it will automatically create a couple of T-MOBILE apn settings. Just leave that as is and create a NEW APN SETTING with same info you can find from Google. Select that as your data apn. And reboot the device for the best result. It should fixed the problem.
For those of you whose sim does not register into tmobile network; i think it could be one of the following reasons:
1. Original ATT modem does not work well with tmobile frequency in your area
2. The device is locked (stolen, non-payment, etc)
3. The device is broken
As long as you are at the home screen with tmobile sim, your phone is GSM UNLOCKED, and it iwill never lock again.
Click to expand...
Click to collapse
Just wanted to say thank you. My T-Mobile SIM wouldn't connect and I even went to the T-Mobile SIM store to get a new SIM Card but it didn't help. As you stated, adding a new APN setting was the only thing that worked.
For those of you who want to unlock your Moto X, I purchased a code on eBay for about $8 and received it within 6 hours. I would post the link but I'm afraid it might be considered spam.
What type of data signal are you getting? LTE?
keoaloha said:
I have an unlocked ATT x1097 and it works just fine with tmobile.
You just have to MAKE A NEW APN SETTING.
When you put a tmobile sim in it, it will automatically create a couple of T-MOBILE apn settings. Just leave that as is and create a NEW APN SETTING with same info you can find from Google. Select that as your data apn. And reboot the device for the best result. It should fixed the problem.
For those of you whose sim does not register into tmobile network; i think it could be one of the following reasons:
1. Original ATT modem does not work well with tmobile frequency in your area
2. The device is locked (stolen, non-payment, etc)
3. The device is broken
4. Your SIM card is damaged
As long as you are at the home screen with tmobile sim, your phone is GSM UNLOCKED, and it iwill never lock again.
Click to expand...
Click to collapse
Yes, LTE and 4G
keoaloha said:
Yes, LTE and 4G
Click to expand...
Click to collapse
Nice. Where did you get your unlock code?
I don't know about OP but I have always used swiftunlocks and have had great luck. Got my N6 from ATT unlocked through them without issues as well.
http://www.swiftunlocks.com/unlock/motorola-at-t-tmobile-worldwide
I noticed that sometimes phone picks up apn without issues and sometimes you have to restart so I just restart every time I make a change to be on the safe side.
Just in case anyone else has the same issue as OP, you should use the
Code:
epc.tmobile.com
APN, NOT the
Code:
fast.tmobile.com
one.
The fast.tmobile.com one would not let me register on the network. epc one did immediately.
Bl00dRunzC0ld said:
I have an unlocked AT&T xt1097 but it won't register my T-Mobile Sim card. It registered for about 3 minutes, got a welcome to T-Mobile text and that was that. My phone number shows up in settings, but it shows I have zero service. I've reset, and rebooted several times to no avail. My sim works in a nexus 6 so it's not the sim. Imei os clean. Does anyone have any ideas what it could be or how I could get it to work with my T-Mobile sim?
Click to expand...
Click to collapse
Hey, I know this post is kind of old but I am currently having the same problem with my moto X 2014 going from At&t to T-Mobile, were you able to get it fixed and if you did, what did you do?
Any luck? I've just come accross the same issue. Got phone unlocked, and bought a new sim and activated. I'll get like 3-4 minutes of service randomly here and there, but about 99% of the time no service. Tried multiple variations of APN settings that I've found online. No luck
Fixed all my seriously annoying connection problems by flashing the 4.4.4 modem.
http://forum.xda-developers.com/showpost.php?p=61208627&postcount=5
I just gotta upload the 4.4.4 modem from my pc, will do that later for you.
edit: https://www.mediafire.com/?4ydw34c4bjxk423
thorasaurus said:
Just in case anyone else has the same issue as OP, you should use the
Code:
epc.tmobile.com
APN, NOT the
Code:
fast.tmobile.com
one.
The fast.tmobile.com one would not let me register on the network. epc one did immediately.
Click to expand...
Click to collapse
Neither one works for data... Just got it unlocked from swiftlocks and I can get voice, but no data :crying:
Someone help!! ...plz
Anyone ?? T-Mobile reps are mostly useless, and keep telling me that my device may have been ' re-locked ' to AT&T after a hard reset !! I know that's not the case because I've thrown in a Vodafone sim and it recognized it ! The sim unlock was purchased from SwiftUnlocks and the phone took it in one try w/o any issues!
Now, I can't even get voice to work... All I see is ' No Service ' and when manually trying to register with T-Mobile, it says ' unable to connect to the T-Mobile network. Please try later '
Someone please help out!!

No signal/voice/data - Restricted access changed. Voice service is blocked

Just as the title says, the phone was working fine then suddenly it lost all signal and went into some kind of restricted mode, it's a friend's phone and he is almost 84 years old.
I have flashed the latest firmware and factory reset to no avail, also changed sim cards and here comes the weird behavior:
I don't have a standard-sized sim card so I had to take it from my USB LTE Modem, it's from another carrier and the phone detected the sim card, went with a full -77db HSDPA signal but data doesn't work at all, it seems to be disabled on status, even configuring the proper APNs it refuses to work. Can't test voice and all my other working sim cards are nano.
Inserting any other sim from another carrier results in no signal/restricted access but the phone still downloads the Internet/MMS configuration.
Have tried setting it manually to WCDMA and GSM, nothing seems to work, only my data sim worked so far *without the data*.
Maybe the IMEI is banned for some reason?
Never heard of this issue until now
Have you tried to flash a firmware that aren't from any carrier?
Kizoky said:
Maybe the IMEI is banned for some reason?
Never heard of this issue until now
Have you tried to flash a firmware that aren't from any carrier?
Click to expand...
Click to collapse
Yes I did, flashed the USA unbranded kitkat rom.
Just got the chance to test with two sim cards from different carriers:
Carrier #1: Registered on network, no data traffic, voice call drops just after trying to call, signal ok
Carrier #2: Registered on network, data traffic seems ok but can't navigate, shows H+ and proper APN and traffic arrows activity but when you try a call it says "Mobile Network Not Available"
Can't send SMS, they stick with a "Sending" status and wont get past it.
This phone was purchased unlocked without a contract, can't see how the IMEI could be banned, plus we do not have regularization for IMEI ban in my country, it's currently a mess.
On a side note it does not detect the sim's phone number which it does on any other phone.
Maybe it's some hardware related issue?
nitzero said:
Yes I did, flashed the USA unbranded kitkat rom.
Just got the chance to test with two sim cards from different carriers:
Carrier #1: Registered on network, no data traffic, voice call drops just after trying to call, signal ok
Carrier #2: Registered on network, data traffic seems ok but can't navigate, shows H+ and proper APN and traffic arrows activity but when you try a call it says "Mobile Network Not Available"
Can't send SMS, they stick with a "Sending" status and wont get past it.
This phone was purchased unlocked without a contract, can't see how the IMEI could be banned, plus we do not have regularization for IMEI ban in my country, it's currently a mess.
On a side note it does not detect the sim's phone number which it does on any other phone.
Maybe it's some hardware related issue?
Click to expand...
Click to collapse
Well that's interesting
My phone can't detect my Sim's phone number either (though i don't know If it is only for me)
Have you tried to flash a ROM? (from XDA)
Kizoky said:
Well that's interesting
My phone can't detect my Sim's phone number either (though i don't know If it is only for me)
Have you tried to flash a ROM? (from XDA)
Click to expand...
Click to collapse
The sim number information depends on the sim itself, most carriers register this information within the simcard so when you go to status you may retrieve your own phone number but I have seen sim cards without this info. The sim cards I tested do have this information and were available on a Galaxy S5 and Xperia Z1 but this E1 fails to read this information which kinda indicates a problem. I don't remember the codes for debugging the sim and network info or I'd give that a shoot.
I will try a custom rom, maybe a different kernel and see if the behavior changes any bit.
I am bidding on a Z1 Compact for this friend, should be a proper replacement and a hell of an upgrade, just concerned about E1's loudness which is certainly superior.
Interesting, I also get this if I don't reboot my phone after like 5 days.

Categories

Resources